Database Info

D2G bricked

I moved from latest cm9 which caused some troubles when I want to call, unknown phone call appear and was unable to cancel it, only reboot helps. Then I found another ICS rom which look attractive for me - MIU in newest version because not all roms support GSM which i'm using as a carrier (european O2). After flashing I got message phone proces fails every 5sec, so I decide to do same as by cm9 to clear both cache and than flash again rom. After clear of all cache I was unable to install any rom, because I had message, it is not signed (tryied cm7.1/2, cm9, miu, some verizon roms).
I decide to sbf this phone.I take rsd lite v5.4.4 and try to flash 2.4.33 rom, but first time, I deplete my batery, ok, I have second one, change it and try again, everything goes like a charm but after 100% of proceed I get message there is some failure, I'm asked for driver to qhsusb_dload and bootloader writes
bootlader d0.11
code corrupt
and don't recognize cable is connected.
Is there some hope?

Maybe newer rsd lite http://forum.xda-developers.com/showthread.php?t=1348587 also try newer drivers http://androidevolved.com/forums/dr...orola-droid-2-global-usb-driver-download.html

some device bricked like that for about 1 month in China , but no one solved this problem. . .
Sent from my DROID2 GLOBAL using xda premium

kew1701 said:
Maybe newer rsd lite http://forum.xda-developers.com/showthread.php?t=1348587 also try newer drivers http://androidevolved.com/forums/dr...orola-droid-2-global-usb-driver-download.html
Click to expand...
Click to collapse
guys in China that phone bricked like this tried different rsd, drivers, computer,USB cable ,sbf(.29,.33,.608,.629),no luck
Sent from my DROID2 GLOBAL using xda premium

jararak said:
After clear of all cache I was unable to install any rom, because I had message, it is not signed (tryied cm7.1/2, cm9, miu, some verizon roms).
Click to expand...
Click to collapse
Were you getting this message in ClockworkMod Recovery, or were you trying to flash custom ROMs in stock recovery?
As for the other, it sounds like you either have a corrupted SBF or your phone's internal flash memory has become damaged. If it is a problem with the internal flash, your only options are replacing the phone or trying to convince VZW or Motorola it should qualify for warranty replacement.

it looks that there is some problem with step by step from CM
http://forum.xda-developers.com/showthread.php?t=1637429 same issue
on other hand I have win xp 32b and battery was fully charged before I start with "games"
I will try those new drivers, I will see if something differs
on other hand, I bought this phone on ebay without any paper, so probably without possibility to try reclamation on verizon/motorola.
edit : to question which recovery I used, I think it was stock recovery (x+power button, than both volume button after ! showed up)

jararak said:
it looks that there is some problem with step by step from CM
http://forum.xda-developers.com/showthread.php?t=1637429 same issue
Click to expand...
Click to collapse
What step-by-step are you referring to?
jararak said:
edit : to question which recovery I used, I think it was stock recovery (x+power button, than both volume button after ! showed up)
Click to expand...
Click to collapse
You can't flash ROMs in stock recovery, only signed update.zip files from Motorola. To flash non-Motorola ROMs you need ClockworkMod Recovery.
If you manage to SBF successfully, you will need to install a root exploit first, then follow these instructions to install CWM: http://droid.koumakan.jp/wiki/ClockworkMod_Recovery

Hi
I tryied this step by step for sbf, it looks this currently is corrupted http://wiki.cyanogenmod.com/wiki/Motorola_Droid_2_Global:_Full_Update_Guide
To my current problem, it looks I have newer driver revision - 5.4.0, but this rsdlite looks like helpfull (now red icon instead of blue one before). phone was recognized. downloading sbf file from http://www.droidknows.com/showthread.php/364-Gingerbread-Full-SBF-4-5-608 , i hope it will be successfull
about original rescue mode, i don't have this knoweledge, it works only with signed rom, but it is good to know to future. I've already bid for some new d3, but some guy beat me by 1$, when I run for one shot of vodka ;D
i will update shortly if this help me or not, but it does not matter, thanks for help
edit : process failed, After 100% of flashing image to phone, it was unable to find qhsusb driver, it is possible somewhere to download it to win xp 32bit?
Failed flashing process. Phone(0000) Error switching phone to BP Pass through mode (0x70BE); phone disconnected.

http://droid.koumakan.jp/wiki/SBF
Read the How-To section.

I think is something wrong with the phone
Sent from my DROID2 GLOBAL using xda premium

zyy757 said:
I think is something wrong with the phone
Click to expand...
Click to collapse
I think you just replied without thinking.
I posted a link to a wiki article that explains what this error is, and a way to fix it.

Gasai Yuno said:
I think you just replied without thinking.
I posted a link to a wiki article that explains what this error is, and a way to fix it.
Click to expand...
Click to collapse
sorry，is the way in wiki work？
Sent from my DROID2 GLOBAL using xda premium

try search cynogen.wikipedia..
follow this instruction
Sent from my DROID2 GLOBAL using xda premium

I tried it my way
cut some mini usb cable which I have, you need red and brown wire, red is + so you need to connect it to the left pin and brown is ground to righ pin, two in a middle is just for checking state of battery - so now I have a charger for both of dead battery (facing screen to bottom and power button up)
than I created bootable usb via this instruction http://www.droidforums.net/forum/droid-2-global-hacks/170060-tool-ezsbf-d2g.html
now my jedy droid which cut apple is changed with red motorola logo, I get rid of code corrupt message and also have bootloader.
now I'm trying again rsd lite to flash 4.5.608 sbf image. I hope this will help someone in future, at least as one step or kind of fallback from state which I found.

I tried sbflite, sbf_flash but still no progress, I still have only red M logo, after that I get bootlader. as I understand, sbf phone shoul install also OS to phone, doesn't?
I also try to cler cache (/data) via recovery mode (default), but not help.
Should I try to install some rom via recovery? i asume i will need some differ rom than sbf

Gasai Yuno said:
I think you just replied without thinking.
I posted a link to a wiki article that explains what this error is, and a way to fix it.
Click to expand...
Click to collapse
The way to fix that in wiki is for windows 7 or vista, but xp?
Sent from my DROID2 GLOBAL using xda premium

I have a theory of a possible way to fix this, but don't know if it will actually work.
From the sounds of what you are describing, it sounds like everything is flashing except the radio in rsdlite, and that the radio is possibly corrupted by the process.
If this is the case, and you still have access to Motorola recovery (booting with X pressed), maybe you could put the OTA update from 2.4.33 to Gingerbread on the SD card, and try installing the update from zip. The reason for doing this would be to flash the radio without using rsdlite. EzSbf does not flash the radio, so if a corrupt radio is your problem, it will be no help. Just a thought, hope it is helpful.

meon_69 said:
try search cynogen.wikipedia..
follow this instruction
Click to expand...
Click to collapse
Do not follow any instructions for the D2G from the CyanogenMod website if you have ever had a stock Gingerbread firmware (versions 4.6.x) on your D2G. Everything on the official CM site assumes your D2G is running stock Froyo (firmware version 2.4.x) and will not work with a Gingerbread kernel.
---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ----------
zyy757 said:
The way to fix that in wiki is for windows 7 or vista, but xp?
Click to expand...
Click to collapse
The wiki article G.Y. linked says "Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly." This means that the problem is more likely to occur under Vista or 7, not that the fix only applies to those versions. If the same problem occurs in Windows XP, the same fix should solve it.

bhigham said:
I have a theory of a possible way to fix this, but don't know if it will actually work.
From the sounds of what you are describing, it sounds like everything is flashing except the radio in rsdlite, and that the radio is possibly corrupted by the process.
If this is the case, and you still have access to Motorola recovery (booting with X pressed), maybe you could put the OTA update from 2.4.33 to Gingerbread on the SD card, and try installing the update from zip. The reason for doing this would be to flash the radio without using rsdlite. EzSbf does not flash the radio, so if a corrupt radio is your problem, it will be no help. Just a thought, hope it is helpful.
Click to expand...
Click to collapse
Tried flash .608 sbf and ota .629,error when update bp
Sent from my DROID2 GLOBAL using xda premium

jabberwockish said:
Do not follow any instructions for the D2G from the CyanogenMod website if you have ever had a stock Gingerbread firmware (versions 4.6.x) on your D2G. Everything on the official CM site assumes your D2G is running stock Froyo (firmware version 2.4.x) and will not work with a Gingerbread kernel.
---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ----------
The wiki article G.Y. linked says "Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly." This means that the problem is more likely to occur under Vista or 7, not that the fix only applies to those versions. If the same problem occurs in Windows XP, the same fix should solve it.
Click to expand...
Click to collapse
Tried, no luck.I'll try again later
Sent from my DROID2 GLOBAL using xda premium

[Urgent] I'm gonna Cry, Boot Failure, CG ERRORS, 1 day old phone :(

HEEEEEEEELP PLEAAASE, i tried to go back to 2.3.5 then my phone doesnt boooooot, i dont know what todo, im desperated, my phone is new and ithas no warranty, i'm stuck with a 650 u$ rock, how to proceeed? what to do? don't know how to use fastboot and cant get it working with command promp in windows.. oh no.. :crying::crying::crying:

Calm down, dude.
Sent from my Atari Falcon030

You need to give more information. How did you attempt to FXZ to 2.3.5? It doesn't boot, so you soft bricked your phone. Why were you trying to FXZ? What system version is your phone? The more details you give, the better we can help. Doesn't do much good to be so overly animated, we're all adults here. I think...
Sent from my Atari Falcon030

Hi,
Were you on 2.3.6 or ICS?
CG errors are not too bad, just softbrick IMO.
If you were on 2.3.6, please find the first sticky post (beginner's guide) for details about how to flash fastboot. You need to follow the instructions to replace files in 2.3.5FXZ.
If you were on ICS, please hang on and wait for someone more experienced to reply.

Read the sticky notes first. Thee noob one and then the others, there should be a fix for your problem. If you have a question ask right away!

jerrycrystal said:
Hi,
Were you on 2.3.6 or ICS?
CG errors are not too bad, just softbrick IMO.
If you were on 2.3.6, please find the first sticky post (beginner's guide) for details about how to flash fastboot. You need to follow the instructions to replace files in 2.3.5FXZ.
If you were on ICS, please hang on and wait for someone more experienced to reply.
Click to expand...
Click to collapse
If he was on the ICS leak, he needs to put the phone back in the box and not do or post anything until the devs figure out the solution. Let's keep the forum clean.
Sent from my Atari Falcon030

i was on 2.3.6 from AT&T (The original One) then i use this:
http://forum.xda-developers.com/showthread.php?t=1539167
Then my phone doesnt boot! Just Failure boot in the Bootloader! :'(
Downloader the full SBF and tried using RSD boot gives FAILURE in step 6
i downloaded moto fastboot and the boot.img
but even being in fastboot mode i cant use any commands from fastboot, i execute it and suddenly closes, tried to execute it from CMD, and just shows the commands, but cant use them..

ITS ALIVE!!!!!!!!!!! THAAAAAAAANKS EVERYONE, can tell how happy i'm because of you to take care of people here. I replaced some files to the 2.3.5 firmware then flashed with rsd lite, works great!!!!!!

Very happy for you. Enjoy but take care and read alot before doing any thing
Sent from my MB865 using xda app-developers app

maxiordoqui said:
ITS ALIVE!!!!!!!!!!! THAAAAAAAANKS EVERYONE, can tell how happy i'm because of you to take care of people here. I replaced some files to the 2.3.5 firmware then flashed with rsd lite, works great!!!!!!
Click to expand...
Click to collapse
Felicitaciones, che!

RDS Lite Phone return FAIL

RDS lite used stock rom install Error:
falied flashing process.3/20 flash mbmloader ''mbmloader.bin''.Phone return FAIL
Help Please
Thanks

tr.sertac said:
RDS lite used stock rom install Error:
falied flashing process.3/20 flash mbmloader ''mbmloader.bin''.Phone return FAIL
Help Please
Thanks
Click to expand...
Click to collapse
Too little information and rds lite does not exist.

Post the full details here including your base firmware version which rom you tried to flash etc etc
Sent from my MB865 using xda app-developers app

Mui ICS rom install after reboot fail.
RSD tlie used stock rom,error Phone Return Fail
My Phone fastboot Screen
Battery OK
Ok to Program
Transfer Mode:
USB Connected

tr.sertac said:
Mui ICS rom install after reboot fail.
RSD tlie used stock rom,error Phone Return Fail
My Phone fastboot Screen
Battery OK
Ok to Program
Transfer Mode:
USB Connected
Click to expand...
Click to collapse
u tried to flash miui? thats not even for rsd

Was you stock 2.3.5, 2.3.6 or on the ics leak before trying to fxz?
Sent from my MB865 using xda app-developers app

Please search!
Ok, so this is how you fix your issue:
If you want to flash the MiUI ROM you NEED TO BE ON ICS (4.0.4) FIRST!
If you are on Gingerbread (2.3.5 or 2.3.6) the install the ICS leak for YOUR CARRIER.
There are a couple of different types of ICS leaks out there depending on your carrier, install the proper one for your phone.
Once you get on ICS the MiUI ROM is installed the BOOTMENU NOT RSD LITE. It's not even the right file type for RSD lite.
I will not give links as you can find them your self with the search bar. I would personally advise against the MiUI ROM as it is VERY buggy right now, and honestly man, if you don't know what I'm talking about you SHOULDN'T BE MESSING WITH YOUR PHONE.
Especially if you were trying to flash the damn thing through RSD lite... for pete's sake.
READ. SEARCH. RESEARCH.
THEN REPEAT.

+1 well put and agreed.
Sent from my MB865 using xda app-developers app

One thing that I've found...be sure that your USB cable is plugged directly into the computer, and not into a hub. I can do everything through a hub with mine EXCEPT fxz back to stock...and so when I tried and it stuck on the same step that you're on, I (and pretty much everyone else that I asked) was stumped. With all the crap that I tried, it really was something that easy, and yeah, I'll admit it: dumb. There really is a reason that tech support people ask dumb questions to start off with.

I've tried everything but I can not friends.
I installed the ICS Mui and format / Webtop after having had this error please help
"Invalid CG Version" with the stock rom try to install rsd lite Phone Return'' failed'' error.
I do not know what to do

Breathe Fall....
Okay mate, one question at a time.
What are you trying to install? RSD lite is ONLY used for installing fxz files and other various file types.
Sent from my MB865 using xda premium

Sounds like he tried to fxz back and is getting the cg error Jim has a fix for in the stickies.
Sent from my MB865 using xda app-developers app

I bricked my A2 need help plz, ve
hi, Last night i install update file which make me stuck in boot animation, I tried to flash FZX files by RSDlite5.6 but cant proced after satge 2 out of 18, i tried every thing i knew to flash it back but i couldn't, and also I tried to install a rom from recovery ( by holding volume UP and down and press power then recovery then again volume up +down and from option apply update from sccard, and it give me "E:signature verification failed install aborted". please can anyone help me, please.
my device is atrix 2 mb685 ATT
my rom is SCv5

Holy font sizes, Batman.

[Q] urgent! D2g brick cannot get into recovery mode

So i have a D2G IM NOT SURE of what all has been done not my phone its a friends phone. All of the buttons are functional i am no noob i have intermediate experience and decent research skills. This phone has been sbf'ed it received the mem map blank after a .608 sbf flash i even found a updated ezsbf bootable linux using the .629 and it didnt work it is stuck on bootloop with the Motorola Red M.. i can get into the recovery by power and hard x BUT, i cannot progress into the menu not by the search key or the volume rockers at the same time or even individually. Any assistance with this issue would be nice. devs any assistance would be appreciated. Im in need of some fast help my email is [email protected] me a email or post on here. .thanks in advance for any help with this issue.
ps.: yes i have tried rsdlite too btw.

just to be sure, which bootloader does it have
when trying to get to recovery do you see android Andy with triangle and!
Sent from my MB870 using xda premium

sd_shadow said:
just to be sure, which bootloader does it have
when trying to get to recovery do you see android Andy with triangle and!
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
Shadow thanks for timely reply.....its D0.11 and yes i get the android with triangle and everything i then press the search to activate the menu...and nothing....so i say maybe were running somthing different try to use volume rockers anddddd....nothing

well recovery changed from search to volume buttons with gb
maybe one of them is stuck
they both need to to be pressed at same time
I'd say keep trying, also does it go into charge mode, with phone off and then wall charger connected?
Sent from my MB870 using xda premium

no charge interface , no recovery interface, i use a external charger to charge the battery, heres a walkthrough...power on normally: turns on shows red motorola M thats what it stays on, Boot into recovery: shows red m screen darkens then i see android with white triangle then ! in the middle of triangle...i then press volume rockers at the same time repeatedly ...no menu pops up at all , i then try it with the search button ...doesnt do anything ...the whole time im seeing android with white triangle then ! in the middle of triangle.. im using a different sdcard (not to sound noobish) but would that make a difference ? if so is there away i can reapply the files needed or adb a recovery?

back to recovery
does it still say mem blank error?
no adb will not work
Sent from my MB870 using xda premium
---------- Post added at 02:18 AM ---------- Previous post was at 02:16 AM ----------
no sd card shouldn't matter, but you could try booting with out
Sent from my MB870 using xda premium

sd_shadow said:
back to recovery
does it still say mem blank error?
no adb will not work
Sent from my MB870 using xda premium
---------- Post added at 02:18 AM ---------- Previous post was at 02:16 AM ----------
no sd card shouldn't matter, but you could try booting with out
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
not currently, after using the ezsbf tool for .629 im at a bootloop i can recreate that error by flashing a .608 sbf if need be..once i have the mem map error i cannot access recovery i dont think i believe itll go straight to bootloader. wouldn't it ?

if charge mode doesn't work, sbf didn't work
reflash 629 or try 2.4.29 then try 629 again
Sent from my MB870 using xda premium

sd_shadow said:
if charge mode doesn't work, sbf didn't work
reflash 629 or try 2.4.29 then try 629 again
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
okay ill try to reflash the .629 ill try the 2.4.29 i have no idea what that is btw its a lower sbf correct? i will get mem mapped wont i? ill most likely have to do it tomorrow i have literally been sbfing all day the battery is too low to program. not to mention its like 3:am. but a link or description of what the 2.4.29 is would be awesome do i want to flash this with rsdlite ? then completely power off and see if itll charge right?

yes 2.4.29 is a sbf, yes it will brick, but files will be written
then flash 4.5.629, may work correct
other options
use different usb data cable
usb port
PC
with rsd lite reinstall drivers
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
links in my list
sd_shadow's [Collection] of Links: FAQs, Guides, Rooting, SBFs, ROMs... - Google Docs

okay so its a new day with a fully charged battery, i cannot find a decent link for the 2.4.29 the only thing i have for the 4.5.629 is a Repacked version, and the one from a live cd linux.......could you provide a few links?

nevermind i found it and imma take your sbf for the .629 as well! ill keep you posted

when triangle will come press volume up and down both button you will see the menu.....................

shahjeee said:
when triangle will come press volume up and down both button you will see the menu.....................
Click to expand...
Click to collapse
recovery is not working. to prior post the sbf did not work properly im working on a separate solution hopefully i can find something and bring it to the devs attention for people with issues like mine.

Hi
Ultimatetechworm said:
recovery is not working. to prior post the sbf did not work properly im working on a separate solution hopefully i can find something and bring it to the devs attention for people with issues like mine.
Click to expand...
Click to collapse
Hi bro. I have same problem. Do you have any solutions?
Thank you

Stock rom for clockwork recovery?

Hey yall,
Quick synopsis I bricked this phone in about December or January and now my other phone broke so I'm going to try and get this one fixed. It automatically boots to the fastboot screen, everytime it powers on. Even after running out of battery, thats where its stuck at when it powers back on. I don't know how to move between stock recovery menus with the phone buttons... but thats another issue.
I see a lot of posts and files for TWRP when unbricking a phone but they dont seem to be compatible with CWM which I prefer. Is TWRP better? Is it easier to unbrick a phone using TWRP with fastboot?
If it will boot into fastoot can the Sprint store unbrick it with their repair service? I really dont have the time to buckle down and do this. I wish there was a sticky or handy guide for unbricking this phone.
One of the first things I have to do is unlock it from Motorola while it is bricked somehow in the debug menus. Not looking forward to all this.
Any pointers or file / thread links to assist will be greatly appreciated.
EDIT - Can someone move this to the right section, sorry I always do this on accident. TOTAL noob

You can use rsdlite and the stock files from this thread
http://forum.xda-developers.com/showthread.php?p=36613321
Will reset your phone back to a factory flash
Sent from my XT897 using Tapatalk 2

Rangerbry said:
You can use rsdlite and the stock files from this thread
http://forum.xda-developers.com/showthread.php?p=36613321
Will reset your phone back to a factory flash
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply. I tried using RSD Lite last night and right after starting the flash I got an error message that something failed. Will the flash automatically fail if the device has a low battery? My fastboot was showing low battery at the time of flash. Also maybe it failed becuase I had the wrong version? Do we need to use a specific version or will any version work? Thanks in advance.

Did you edit the xml file you have to remove some lines
Sent from my XT897 using Tapatalk 2

Ive deleted the 2 XML lines about "getvar". It all may have been due to low battery. But unbricking with RSD lite seems way too easy. You just boot into fastboot, turn on RSD lite, flash the firmware, and thats it? 3 easy steps? Fixing to give it another shot here in about an hour.

Hey yall it must have been the low battery that failed it. I cant believe how easy it is to unbrick with RSD lite. Why can't we flash custom roms with RSD lite?

We can, but why bother with custom interfaces when it's not needed?

I mean can we flash somethimg like CM using RSD lite?

No, I didn't make the image for RSD lite (and won't be making it). Aftermarket firmwares are flashed from recovery, not via RSD lite ( = fastboot).