Does anyone have this problem? I`ve searched and cant find a solution.
I had sense rom on my phone then decided to go back to jboogie rom. I booted into stock recovery(power+vol down) and when i tried to tap bottom right of screen the screen wouldn`t respond so I couldn`t do a factory reset. I then tried volume up=power button to flash sbf through RSDlite. Nothing came on my phone screen telling me to attach usb, it juat stayed blank, although rsdlite said phone was connected so i started to flash sbf anyway. Then on the phone screen it said software update in progress, once it finished flashing, instead of saying rebooting phone on RSDlite it came up with "pass" and the phone wont boot or do anything at all now.
Sorry for long message, but hope someone can help.
Thanks
Mark
try to flash a stock rom sbf with rsdlite and after that, do a wipe in recovery mod. to enter recovery press power+ vol down, after the droid apears, push vol up+vol down. You have to see then the stock recovery menu. I did in the same way and is working. I think is now so easy to really brick this phone.
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
not even white led?
maybe your battery is 2low?
if u see the white led u can still go into bootloader and flash .sbf with rsd lite
Hi there,
I can't believe its dead!!
I have tried every rom available and tried out all the .sbf's too. A couple of times i thought i have bricked it but it was always done to user error (or a lack of understanding at times on my part). These Defy's seem to be almost bullet proof!
I had the "pass message" from RSDLite and all i had to do was flash the "2.2 bootonly" sbf to get past it. I have had corrupted boot loader messages and more but it just keeps coming back for more once things the right things are done in the right sequence.
Assuming your battery is ok, I would try installing one of the latest froyo .sbf's with RSDLite 3.9 only completion do a wipe from the stock recovery (hold pwr + vol down). Press vol up and vol down to activate the menu, select wipe with volume up or down, press power to go. The after rooting apply one of the excellent roms from Jboogie & Pays.
Good luck... sure it will be fine.
Andy
qpzmaluk said:
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
Click to expand...
Click to collapse
If you have only black screen, you have to flash the latest undowngradable rom you flashed, then you you finally get to moto logo, you will be able to go to recovery and wipe. After it it will boot just fine.
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
astearon said:
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
Click to expand...
Click to collapse
I had a similar thing when i flattened my battery half way through flashing an .sbf. I borrowed a friends battery, flashed the boot only and all was fine. There is a couple of pointers on the forum on how to charge your battery if you dont have a working rom (it wont charge without one! You have to get the motorola logo followed by the battery animation to charge your battery).
In your case im pretty certain you could have saved yourself the hassle of sending it off for service.
Andy
Thanks for all the replys, I have already had the dead battery a couple of weeks ago and "revived" it by putting the + and _ wires of usb cable into the battery of the defy, but this seems different, I cant get anything to work on it, no roms will flash and all I get is black screen. I do get the white led but only sometimes. It is very change indeed, I will try some of the solutions you guys said tomorrow and let yous know how I got on.
Thanks again
Mark
I did not want to risk charging out of wires, i have unlimited warranty on it after all so i gave it to service hoping a fix will be made by guys who know what they where doing (i hope).
In any case i see -qpzmaluk- tried off of wires and nothing happened.
I tried to flash again this morning using all the techniques above but I cant get rsdlite to recognise my phone either now. All i get is when connected to usb is the white led, nothing else happens when i try to go into recovery etc.
Mark
Huge thanks to EDITION I got my phone working again.
I did what he said about flashing last undowngradeable rom and surprisingly it came back to life. Brilliant mate, i cant thank you enough.
Mark
how did u do that? if u said your rsd lite cant recognize your phone?
I kept trying to connect to pc with usb and rsdlite eventually found it so I took the chance of flashing froyo 3.4.3-the one I last had on the phone, and surprisingly this time it went throughht to the end of booting the phone and now I have everything working again including stock recovery etc.
One thing to mention was that I couldn`t get into pwer+vol up or down before I flashed this time I flashed my phone. I just connected it to pc and luckily rsdlite recognised it this time and I just pressed flash button, then eventually phone booted up. So something was wrong and it didn`t flash it the normal way by going into stock recovery on phone but it worked
my droid 2 global's bootloader (i presume) is blank.
my phone will boot and there will be a complete blank screen.
on my droid x i previously had bootloader access the same way by holding both volume buttons.
Why is my Bootloader screen blank?
oh yeah, and the black screen flashes on and off every 5 minutes too.
please help as i dont have another phone.
can you connect to rsd lite?
sd_shadow said:
can you connect to rsd lite?
Click to expand...
Click to collapse
no... and i cant use adb shell because i forgot to enable usb debugging
Does this happen when you normally boot the phone too (do you ever see white or red Motorola logo)?
If you don't, you may have hard bricked (damaged bootloader somehow).
leobg said:
Does this happen when you normally boot the phone too (do you ever see white or red Motorola logo)?
If you don't, you may have hard bricked (damaged bootloader somehow).
Click to expand...
Click to collapse
Even when i had never attempted to root, my bootloader was blank.
but since i cant do anything because im stuck at the venusX splash i cant even go into clockwork mod
what about stock recovery
hold x when powering up then press up and down volume keys
if that works you could try factory reset or even install zip from sd card
Fixed A Problem Very Similar To This
So my neighbor has a droid 2 global and pleaded that i restore it to default SBF cause his screen went blank and he already has the manufacture warranty replacement phone sent out. if Motorola gets it back with it being circumvented they'll revoke his warranty and charge him FULL price for the new phone.
Two tricks,
1 in the scenario above i simply put a fully charged battery in and turned it on , plugged it in to my win 7 64 with rsd lite 5 and SBF'd it successfully
2 with my GF's droid 2 global when i got it all messed up trying the latest 1.10.7 from MIUI, i had to remove the battery , put it back in (if it suddenly turned on just by putting a battery in i'd take it out and try till it did nothing) then i'd flip the keyboard out and hold down the up arrow on the keyboard. i would push power and hold the up arrow for about 5 seconds and plug it in to the same pc SBF it and it would work again
Hi
After being on numerous custom Roms for the xoom I decided to return to stock and was succesful in return to the 3.01 stock image for the wifi MZ604 model
I was also successful in relocking the xoom.
I then began to receive the offical updates though everytime the were applied I had to go into recovery and wipe the device as otherwise it would bootloop on the dual core screen.
On the last update that it received and that was installed , on rebooting nothing happend and the screen just went blank
No combination of volume up + power would show any sign of doing anything.
After leaving the tablet to the side for awhile I noticed it came up with the following
model mz604 : Revision0 (0x8000) modem none
InitBl Info function failed with codes 299/3
failed to boot 0x0001
starting RSD mode 3
one wire : charger is not connected or battery is not being charged
battery charge level : 56%
I tried fastbooting and adb at this point but no devices are found. However when plugging in the xoom my laptop recognises something is attached.
After some searching I found out about RSd lite and SBF files.
When opening rsdlite v5.6 (running as admin) the tablet is recognised and I have now attempted to use two sbf files
HUBWF_W5.H.6.4-20_SIGNED_UCAHUBLWFRTCOREEU_P010_A010_M004_HWwifi_hubble_AP1FF.sb f
and
HUBWF_W5.H.6.2-24_SIGNED_UCAHUBLWFRTCOREEU_P006_A006_M003_HWwifi_hubble_Service1 FF.sbf
however both fail when it attempts re numeration.
I would greatly appreciate any help that anyone could give on this
Thanks
Try this.
My mom's Xoom had a similar problem. Reboot the tablet by pressing Volume Up and Power.
Then quickly turn on the xoom and press the down button as fast as possible, and continue pressing until you see "Recovery Mode" (or something similar) on the top left of the screen.
Once you see that, press the volume up button. Quickly, when you see the Android guy with the exclamation mark tap the power button and the up button.
This will take you to recovery mode. In there use the up and down volume keys to navigate and the power button to confirm things.
Go down to restore/delete data (may vary) and press power. use the volume down key to scroll to Yes.
This will restore your tablet back to factory settings. If you're trying to backup your data, don't try... No such luck and you won't be able to without the tablet booted.
thanks for the reply but this didnt work. Tried quite a few times. The screen just goes blank and again after a long while the error shown in the op appears. Should add there is no Motorola logo showing.
I have also tried forcing fastboot by the instructions found in other similar threads but again this does not work.
I think my best bet is the SBF files , but need to understand why this is failing on re-numeration
Well, I am quite certain i have bricked my phone. I was trying to flash CM9 from openrecovery and everything was normal. When the phone rebooted out of OR it stayed on the M logo for quite some time. I figured usually it takes awhile so I let it go. Needless to say, it didn't boot up or do anything, it was stuck. I pulled the battery and tried to put it into recovery mode. at first it looked as if it was going to go into recovery, had the progress bar at the bottom, but then it quickly went blank and the phone rebooted. I tried again. This time it gave me the triangle with the exclamation mark. I tried accessing the recovery option to hard reset and wipe the phone both with and without the SD card by pressing Volume up + Gallery key down + camera shutter. It did nothing. I have tried to access the bootloader, but to my horror, the phone will not go into bootloader mode for me to flash with RSD! No matter what button combination I try the phone just stays on the M logo, it will not go into bootloader mode. This is both with and without the SD card inserted. Battery is/should be 90-100%.
Any suggestions on what I can do at this point? Or is all hope lost? It is a Motorola XT720 (not Motoroi) Singapore model.
I forgot to also mention, when the M logo is on screen, pressing the gallery button turns on and off the flashlight (red light)
SO I've had my Ultra for about a year now and last night, my phone got bricked. how? I don't know. nut I'm stuck at the logo screen. I've gone through basic recovery and factory reset procedures yet, nothing happens. In case you're wondering, i never tried to root my phone. all stock roms. nothing has been changed. My friend offered to help me out but i'm away from home and need help to get my phone up and running again.
imawizerd92 said:
SO I've had my Ultra for about a year now and last night, my phone got bricked. how? I don't know. nut I'm stuck at the logo screen. I've gone through basic recovery and factory reset procedures yet, nothing happens. In case you're wondering, i never tried to root my phone. all stock roms. nothing has been changed. My friend offered to help me out but i'm away from home and need help to get my phone up and running again.
Click to expand...
Click to collapse
It's actually a good thing that you get the "M" logo, this means you should be able to get into Fastboot. Do this with following procedure:
1. Power phone completely off (if it's on, and stuck at logo, hold down Vol-Down and Power at same time until phone shuts off)
2. Power phone into fastboot by holding Vol-Down and Power for 5-10 seconds and letting go. It should show you a text screen
If you can get this far, you should be able to use RSD Lite to flash the stock image (4.4.4 SU6-7 is the latest). Links:
RSD Lite
Motorola Drivers
Ultra 4.4.4 SU6-7 CFC Firmware
Hope that helps!