Let me preface this by saying I am fairly new with rooting and flashing /flamesuit. I have a sprint galaxy tab that I rooted (or tried to root I should say) using z4root. I applied a permanent root and everything went fine. I then installed rom manager to help with putting clockworkmod and flashing roms. My tab has the superuser app on it, but rom manager still displays an error message that says my tab needs to be rooted before I can use it, I cant even install cwmod. At this point I'd just like to start over and use a different method to root the tab but everytime I try to remove the root using z4 the tab vibrates a few times before force closing. If there is something I could use to restore my tab without clockworkmod I would be very appreciative if someone could bring it to my attention.
Thanks
Try using SuperOneClick to UNroot your tab.
do a search of the forums for z4root
Hi,
I have installed Custom ROM Overcome_v1.6.4 on my Galaxy Tab P1000 (GSM). Its installed successfully. But i am facing problem that during all calls voice vanishes and sometimes reappear or call gets dropped.
Can anybody suggest on this problem. Secondly if i want to install JPJM5 how can i do that? I tried but odin fails in the first step of downloading Pit file.
I recently rooted my note using "method 2". However when I flashed a jellybean Rom, I lost s pen functionality. So after flashing firmware after firmware last night, I got it back to ics (however, snote kept crashing upon boot, so I had to disable it). The spen is working and all.
So, from here, how do I go about getting jellybean with working s pen from here?
Single step for Custom-Recovery and root!
Based off single step root made by @ketut.kumajaya and @Luigi2012SM64DS for P31XX - Thanks for the permissions to use yours as base
This Method should work on Android 4.0.x Android 4.1.x and Android 4.2.2.
Disclaimer:
Code:
[COLOR="Red"][B]I don´t have a P51XX - i couldn´t test - but this worked great on P3110 :)
Using this root increases your flash counter.
Use on your own risk! I am not responsible for bricked devices or dead SD cards!
Thanks [user=487416]@MJRL[/user] for confirm working on P5110XXDMI1[/B][/COLOR]
Please give some feedback if it worked
Single step for Custom-Recovery and root!
Philz Touch Recovery or CWM
SuperSU v1.94 from Chainfire, SuperSU: "su" in "adb shell" without any prompt!
BusyBox v1.21.1-stericson
Remove all existing root and busybox before installing the new one
Fix busybox symlink, prevent it conflict to Android toolbox
sysrw and sysro script for remounting /system read write or read only
Backup /etc/install-recovery.sh script to /etc/install-recovery.sh.backup and /system/recovery-from-boot.p patch to /system/recovery-from-boot.p.backup if exists, so we can restore it if necessary
Flashing using Odin3 v1.87:
Download "GT-P51XX_XXXX-SuperSU-1.94-BusyBox-1.21.1_universal.tar.zip" and extract it once (you need the *.tar.md5 inside)
Flash the *.tar.md5 file as PDA
Make sure "Re-Partition" and "F. Reset Time" UNCHECKED,
"Auto Reboot" checked!
Credits:
ketut.kumajaya,
Phil3759,
Google,
Samsung,
koush,
Chainfire,
codeworkx,
dsixda,
weltwon,
stericson,
TWRP
Luigi2012SM64DS
reserved
> 100 Downloads at the moment (since only 5 days!).
Thanks for Feedback:
@MJRL for confirm working on P5110XXDMI1 (using GT-P5110_CWM-6.0.4.5-SuperSU-1.65-BusyBox-1.21.1_universal)
Can someone else confirm if it is working?
Android-Andi said:
Can someone confirm if it is working?
58 Downloads at the moment... no feedback?
Click to expand...
Click to collapse
Thanks, OK with P5110XXDMI1, latest stock
Thanks for your feedback Wich file/recovery did you choose?
Edit: 101 Downloads ... only 1 feedback :/
Android-Andi said:
Thanks for your feedback Wich file/recovery did you choose?
Edit: 101 Downloads ... only 1 feedback :/
Click to expand...
Click to collapse
This:
GT-P5110_CWM-6.0.4.5-SuperSU-1.65-BusyBox-1.21.1_universal.
And then Triangle Away cause I need to reset counter.
:good:
Updating?
i update the one with PhilZ in the evening after work
Updated Root with PhilZ Touch:
Philz Touch Recovery 6.00.8
i have a p5113 its the same as wifi but with ir capabilities will this work and which one should i try?
you can use P5110 files.... with CWM and PhilZ Touch tested a lot of times for P31XX without problems, not tryed with TWRP but i am sure it works (there are a lot of downloads, but jo feedback).
thnx and i know i prob shouldnt be asking this here but can i put on p5100 p5110 roms because of availability?
edit: nvm i figured it out i can use a play store app for ir
P5100 = P5100 (will work on P511X too, but Phone Stuff included, maybe mic not working)
P5110 can be used on P5110 and P511X - if you use on P5100 3G and other Phone Stuff missing (maybe mic not working on P5100)
Android-Andi said:
you can use P5110 files.... with CWM and PhilZ Touch tested a lot of times for P31XX without problems, not tryed with TWRP but i am sure it works (there are a lot of downloads, but jo feedback).
Click to expand...
Click to collapse
worked great installed cm 11 and so far so good. my device says not charging even though it charged slow but it did that on stock tw rom too is it because of the charger im using?
@androidandi....GT-P5110 Twrp. Flashed. Confirmed. VERY NICE!!!
Works with new android 4.2.2 ?
LE:
"This Method should work on Android 4.0.x Android 4.1.x and Android 4.2.2."
Nice, tks a lot!
Confirmed: Works with new android 4.2.2
Hi
Updated my 5110 from 4.0.4 to 4.2.2 trough KIES without any wipe. Everything went great and my tablet worked with all apps still installed.
But I was unable to boot into download mode to install the .tar.md5 file. Every time I tried I got a android figure laying on his back. He has a red box with an exclamation point in it
The solution proved to be to adb into download and then connect to Odin.
Then there was no problem to root and install custom recovery with Android-Andi’s file :good:
ODIN FAIL with TWRP file on p5100?
Hello all-
I am pretty sure I have a p5100 (Galaxy Tab 2 10.1 ESPRESSO10, Wifi & LTE data). I was in Download mode and tried flashing the TWRP all in one file. It recognized device without issue but once it started to do it's thing, it failed. I attached a screenshot of ODIN.
Also, on the device download screen, it displayed the message "Unsupport dev_type" ??
Please advise!!
Read my next post!
@DroidJay123
LTE?
IT IS NOT A P5100! You´ll brick your device if you try to flash P51XX files!
Boot your device and take a look what device you own!
P5100 = Galaxy Tab 2 10.1 3G+Wifi
P5110 = Galaxy Tab 2 10.1 Wifi Only
P5113 = Galaxy Tab 2 10.1 Wifi + IR
What device do you own
- SGH-i497 (ATT)
- SGH-T779 (T-Mobile)
???
Android-Andi said:
@DroidJay123
LTE?
IT IS NOT A P5100! You´ll brick your device if you try to flash P51XX files!
Boot your device and take a look what device you own!
P5100 = Galaxy Tab 2 10.1 3G+Wifi
P5110 = Galaxy Tab 2 10.1 Wifi Only
P5113 = Galaxy Tab 2 10.1 Wifi + IR
What device do you own
- SGH-i497 (ATT)
- SGH-T779 (T-Mobile)
???
Click to expand...
Click to collapse
SGH-i497. From AT&T Wifi AND 3G. It also has the "Smart Remote" application and what looks like an IR spot next to SD card slot. So it has the 3G, Wifi and IR?
Hi
A few months ago I installed Team Win Recovery and Android CM on my Samsung Galaxy Note 10.1 because stock android slowed it down. That was however a bad idea as Android CM is not supported by some apps which I use. Now I wanted to go back by stock android.
I used newest Odin to install a stock version which I found on the internet (stock software is hard to get). I was not in super user mode when I did it. Since then my Tablet is busted. On start it remains on the Samsung Galaxy Note 10.1 logo. Cannot get into TWRP anymore. Tried to install TWRP via odin, does also not work.
Was it a problem that I wasn't SU user, or was the stock software not compatible? Can I change SU user state via Odin? Any idea how to get out of this mess?