Database Info

Soft-bricked atrix help plzz

i am stuck at this screen and my phone not charging.
I tryed to root my atrix and I was using unlock_v4.2, and it keep saying waiting for device. Now i am stuck
at this screen. plzz help me.
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going into RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC Dload
6 BP HW Diag & boot AP
7 BP HW Bypass BP only
8 BP SW Bypass RSD
9 Andoid Recovery
10 Boot Andoid (No BP)
11 Device UID
12 console=tty50,115200n8
13 Early USB Enumeration
14 BP Tools
------------------------------
Vol Up to select, Vol Down for next choice
Current choice is mode:
RSD
Starting Fastboot protocol support

Brandon25k said:
i am stuck at this screen and my phone not charging.
I tryed to root my atrix and I was using unlock_v4.2, and it keep saying waiting for device. Now i am stuck
at this screen. plzz help me.
Click to expand...
Click to collapse
Atrix 4G/ Atrix HD /Atrix 2 what's yours ?
you have to flash a stock .sbf file/rom
Identify your device model and post in right thread find it from Menu choose Devices by OS or Manufacturer
post here if I can help.. at least post here details how you solved that !
to flash a stock ROM you have to do something like that
1. install RSDLite and driver package
2. Power down your phone
3. On your phone hold vol up (??) and power till you see RSD at the top of the screen
4. Launch RSDLite on PC
5. Load SBF file
6. Plug your device into your computer RSDLite should recognize your phone right away if you installed the drivers
7. Press the “Start” button
8. it takes a while...will reboot a couple times (??)

ruscan.calin said:
Atrix 4G/ Atrix HD /Atrix 2 what's yours ?
you have to flash a stock .sbf file/rom
Identify your device model and post in right thread find it from Menu choose Devices by OS or Manufacturer
post here if I can help.. at least post here details how you solved that !
to flash a stock ROM you have to do something like that
1. install RSDLite and driver package
2. Power down your phone
3. On your phone hold vol up (??) and power till you see RSD at the top of the screen
4. Launch RSDLite on PC
5. Load SBF file
6. Plug your device into your computer RSDLite should recognize your phone right away if you installed the drivers
7. Press the “Start” button
8. it takes a while...will reboot a couple times (??)
Click to expand...
Click to collapse
it is atrix 4g,i dont know the model

Brandon25k said:
it is atrix 4g,i dont know the model
Click to expand...
Click to collapse
You have it. The model is the Atrix 4G. There's a forum for that where you'll get a lot more help.
(Btw, model number is MB860)
Sent from my MB508 using xda premium

Brandon25k said:
it is atrix 4g,i dont know the model
Click to expand...
Click to collapse
ok now enter here and read more and ask them if you don't understand I can't guide you because somebody made it better than me

thank you all for your help. i have fixed it..
I do have one more favor. the atrix is 4.5.141
how do i root it?

Brandon25k said:
thank you all for your help. i have fixed it..
I do have one more favor. the atrix is 4.5.141
how do i root it?
Click to expand...
Click to collapse
again ? well ..take care...:laugh: why not to read that thread ...and bookmark it !
if you can't wait read this http://forum.xda-developers.com/showthread.php?t=803682
it depends of what you have now flashed !!
how did you solve it ?

I used RSDlite. and used
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf
to flash it back to the stock so it would become unsoft-bricked.
thank you for all your help. I just hope that this time i dont soft brick it again.

internet issue

hi guys,
I've tried to root & cwm & custom rom on a friend device, but since I cannot unlock bootloader, and I cannot enter in fasboot mode (tried with power+volum up, or volum up+plug in usb cable - no blue led at all), I've tried to reinstall stock firmwares (ST26i_11.0.A.7.5_Sony.ftff, ST26i_11.0.A.3.28_WE.ftf, ST26i_11.0.A.3.18_Global.ftf). Everything went fine with stock firmwares installation, except mobile internet connection. Doesn't work at all (I'm activating it, but doesn't work). Should I flash any baseband/kernel? Can you please provide me a link?

ady_uaic said:
hi guys,
I've tried to root & cwm & custom rom on a friend device, but since I cannot unlock bootloader, and I cannot enter in fasboot mode (tried with power+volum up, or volum up+plug in usb cable - no blue led at all), I've tried to reinstall stock firmwares (ST26i_11.0.A.7.5_Sony.ftff, ST26i_11.0.A.3.28_WE.ftf, ST26i_11.0.A.3.18_Global.ftf). Everything went fine with stock firmwares installation, except mobile internet connection. Doesn't work at all (I'm activating it, but doesn't work). Should I flash any baseband/kernel? Can you please provide me a link?
Click to expand...
Click to collapse
After activating, you should get the internet setting from your network provider

Thx a lot, yes, you're right.. I see that now .
What about fastboot mode? Can someone help me out?

ady_uaic said:
Thx a lot, yes, you're right.. I see that now .
What about fastboot mode? Can someone help me out?
Click to expand...
Click to collapse
Turn off phone, hold down vol+ and plug in usb cable..
Sorry my english..

done that already; like I said, I can't see any blue led, either if I'm using this method, or power+vol. up.

Maybe the phone is sim lock..sorry dont know much bout this..
Sent from my ST26i using xda premium

Did you try going to the service menu and check if the device supports bootloader unlocking....?
You have to dial *#*#737 something something... I don't exactly remember but Google for it....
Device: ST21i
ROM: Stock .27 rooted, deodexed, debloated
Kernel: Vengeance 1.4 OC 1GHz
STABLE!!! :beer:

[Q] GoClever TERRA 90 (Root)?

Hi guys, recently i've recieved my new tablet (JellyBean 4.1)
It is fairly good for its price. I'm wondering if there is a possibility to root it. I can enter stock recovery but i cannt flash ANY zips, verification always fails. i've tried ZhuoDashi, root.zip, SuperOneCLick (even tried z4, andrunlock, gingebreak) I've also tried manual rooting via ADB by pushing SU, Superuser, and busybox, but still no awail...
Also it seems i dont have fastboot. i can enter reboot fastboot, but it just reboots normaly.

Bump?

The same problem here... anybody fix it?

darthrivius said:
The same problem here... anybody fix it?
Click to expand...
Click to collapse
Don't know, we may ask some senior members to look into it. But i doubt they will, tablet is not that popular...

Sorry for the off topic but do you have problems with the internal memory? I just installed some apps and now I'm unable to update due to low memory in he internal (400 mb). I've search for a solution but there isn't for non rooted devices and that's how I ended up here .
It has a lot of native apps that cannot be uninstalled or moved to SD. I like this tablet a lot but if I'm unable to install or even update some apps I'll try to exchange it for another model.

so i need root for my 3g modem... but maybe you can help me without root^^
goclever service told me that 3g modem GOCLEVER GCM02 should work with this modem (terra90)
so i bought it, connect and nothing :|
i turned off wifi, check acces point, tablet correctly find mmc so it sense this modem. i click on blue circle on the right, wait wait and NOTHING.
so your tablet work with 3g modem? or what should i do?

Dunno
darthrivius said:
so i need root for my 3g modem... but maybe you can help me without root^^
goclever service told me that 3g modem GOCLEVER GCM02 should work with this modem (terra90)
so i bought it, connect and nothing :|
i turned off wifi, check acces point, tablet correctly find mmc so it sense this modem. i click on blue circle on the right, wait wait and NOTHING.
so your tablet work with 3g modem? or what should i do?
Click to expand...
Click to collapse
I really dont know, Wifi is **** on goclever its all i use as a connection..

Dem0nHunter said:
Hi guys, recently i've recieved my new tablet (JellyBean 4.1)
It is fairly good for its price. I'm wondering if there is a possibility to root it. I can enter stock recovery but i cannt flash ANY zips, verification always fails. i've tried ZhuoDashi, root.zip, SuperOneCLick (even tried z4, andrunlock, gingebreak) I've also tried manual rooting via ADB by pushing SU, Superuser, and busybox, but still no awail...
Also it seems i dont have fastboot. i can enter reboot fastboot, but it just reboots normaly.
Click to expand...
Click to collapse
Hi op, same problem here, but one step behind your progress
How can I enter to the stock recovery ? I try with some combinations but still don´t work.
THX!!

Fcinco said:
Hi op, same problem here, but one step behind your progress
How can I enter to the stock recovery ? I try with some combinations but still don´t work.
THX!!
Click to expand...
Click to collapse
Well, i installed adb on my PC via Android SDK, and typed in my cmd " adb reboot recovery " while tablet being plugged in. I hope i helped somehow!

Dem0nHunter said:
Well, i installed adb on my PC via Android SDK, and typed in my cmd " adb reboot recovery " while tablet being plugged in. I hope i helped somehow!
Click to expand...
Click to collapse
Thousand times grateful for the info, I was focused on finding combination of buttons.... :highfive:

Recovering the bootloader mode

My Milestone 2 is totally dead now...the screen is totally black or no display...initially it was on bootloader mode and windows do recognized the Motorola interface..but now its not even getting recognized....
Is there any way to make the M2 to bootloader mode or is there any way to recover it....?

Hi i had the same issue, but i found that only the display was not correct powered. Wipe data and cache in stock recovery and pull battery. Then start in bootloader mode and connect to pc rsd lite says usb connected, you can flash even you dont see anything from bootloader screen.
Gesendet von meinem A953 mit Tapatalk 2

M2/4.2.2 said:
Hi i had the same issue, but i found that only the display was not correct powered. Wipe data and cache in stock recovery and pull battery. Then start in bootloader mode and connect to pc rsd lite says usb connected, you can flash even you dont see anything from bootloader screen.
Gesendet von meinem A953 mit Tapatalk 2
Click to expand...
Click to collapse
If the display is not working, how you wiped data in stock recovery ? Now my phone is not getting recognized by pc...

harisit2005 said:
My Milestone 2 is totally dead now...the screen is totally black or no display...initially it was on bootloader mode and windows do recognized the Motorola interface..but now its not even getting recognized....
Is there any way to make the M2 to bootloader mode or is there any way to recover it....?
Click to expand...
Click to collapse
If its not recognized but detected I think would mean you need correct drivers. When my phone failed it was also not recognized but I heard windows noise like when connecting any device so installed old drivers and it was detected.

harisit2005 said:
My Milestone 2 is totally dead now...the screen is totally black or no display...initially it was on bootloader mode and windows do recognized the Motorola interface..but now its not even getting recognized....
Is there any way to make the M2 to bootloader mode or is there any way to recover it....?
Click to expand...
Click to collapse
I also had this problem. I bought an external battery charger and charged the battery in it, then put it back in the device.
The problem is, when the battery is empty, it won't charge in the device and RSD Lite won't work.
My advice is to get the battery charged somewhere and put it in bootloader mode then flash it.

I don't remember very well but I had the same issue when I make mistake and flashed 2.3.6 and after that trying to put 2.3.4.
U can try flashing tje one of 2.3.6 (vivo brasil etc), but after that u are stuck on bl 4 roms.

Does anyone have UK MILS2_U6_2.2.16 version sbf....i need exactly this version..if someone have this please do upload it somewhere..

harisit2005 said:
Does anyone have UK MILS2_U6_2.2.16 version sbf....i need exactly this version..if someone have this please do upload it somewhere..
Click to expand...
Click to collapse
If it helps you, I can upload MILS2_U6_2.4.24 DACH. It is German Froyo 2.2.2.
It is almost same as UK except for keyboard layout.

---UFO--- said:
If it helps you, I can upload MILS2_U6_2.4.24 DACH. It is German Froyo 2.2.2.
It is almost same as UK except for keyboard layout.
Click to expand...
Click to collapse
Thanks , i got it...and somehow i restored the rom...

DJPatriX said:
I don't remember very well but I had the same issue when I make mistake and flashed 2.3.6 and after that trying to put 2.3.4.
U can try flashing tje one of 2.3.6 (vivo brasil etc), but after that u are stuck on bl 4 roms.
Click to expand...
Click to collapse
Yes, exactly this happened to me. I was not able to enter the bootloader mode, the phone didn't visually react on any keys including the PWR... Looked like a brick. But it wasn't!
As a last chance I started sbf_flash with proper SBF file, waited for the "Waiting for phone" message, inserted the battery to the MoMi2 and without pressing anything, just connected it. After about 5 seconds, sbf_flash properly detected the phone, initiated and executed the RAM loader, the display revived and showed the same as with regular flashing... and that's the happy end .

Please Help with htc inspire 4g in bootloader screen not recognized my computer

Ok. I need some help. Have an at&t htc inspire, bootloader screen and when i plug it in my computer to run an ruu exe file, my windows 8 computer will not recognize the device? I have tried installing the newest drivers, other usb ports, etc. Please Help, thank you

ok, got past that. NOw whenever my phone is plugged in and i reboot to the bootloader, it comes up with an error message saying the usb device is not recognized and i can't do anything? Now what?

dmartin1972 said:
ok, got past that. NOw whenever my phone is plugged in and i reboot to the bootloader, it comes up with an error message saying the usb device is not recognized and i can't do anything? Now what?
Click to expand...
Click to collapse
If you're connecting from bootloader, use fastboot not ADB.

When I have the phone on and connect the usb it recognizes it. But when I run the ruu update,and the phone boots into the bootloader, it says usb device us not recognized. I have HTC sync installed on my computer. Windows 8 64 bit.

What I really need us a pd98img.zip file for an at&t HTC inspire 4g with 2.3.5 gingerbread. Anyone have that?

dmartin1972 said:
What I really need us a pd98img.zip file for an at&t HTC inspire 4g with 2.3.5 gingerbread. Anyone have that?
Click to expand...
Click to collapse
You can get the stock images from htcdev dot com.
You will need to create an account but it's free. Also, is your bootloader locked or unlocked?
If it is unlocked, you will need to relock it before flashing a signed stock rom.

I got it back to stock AT&T 2.3.5 by pulling the img file out of the downloaded ruu. I still cant get the phone to be recognized by my computer in the bootloader screen though? So I can't get it rooted or unlocked on the htc developer site. What am I doing wrong??? Also what should I use to root it. I have tried easy ace root tool. and will not work

dmartin1972 said:
I got it back to stock AT&T 2.3.5 by pulling the img file out of the downloaded ruu. I still cant get the phone to be recognized by my computer in the bootloader screen though? So I can't get it rooted or unlocked on the htc developer site. What am I doing wrong??? Also what should I use to root it. I have tried easy ace root tool. and will not work
Click to expand...
Click to collapse
Are you using fastboot or ADB? What is the error message from the Easy Ace Root Tool?

Ok. I don't know what I did but i got it to work. Now, what is the newest root tool that works? Also do I need s-off for roms? Not sure how to proceed??

dmartin1972 said:
Ok. I don't know what I did but i got it to work. Now, what is the newest root tool that works? Also do I need s-off for roms? Not sure how to proceed??
Click to expand...
Click to collapse
Here is the link to what you need http://forum.xda-developers.com/showthread.php?t=2169518

Does that ace root tool still supposedly work? I've been at this for weeks, hours of searching forums under my belt and nada.

caseymac91 said:
Does that ace root tool still supposedly work? I've been at this for weeks, hours of searching forums under my belt and nada.
Click to expand...
Click to collapse
I had this same exact issue. I have a Lonovo Yoga with 3.0 USB ports and Windows 8.1 and no matter what I did I couldn't get my phone to work on my computer. I ended up having to switch computers just to have my phone recognized. I switched to a Windows 7 computer with 2.0USB ports and my phone was recognized in Bootload Mode. After I installed CWM I was able to have my phone recognized on my Yoga after going into CWM recovery and mounting my SD card.
Hope this helped!:good: