Cute case for the HTC one s - HTC One S

Hi, Soon I will get my HTC ONE S
And I'm looking for a cases for it. I didn't find much cases for this model...
Maybe you can help me. I want to buy pink / cute case, Silicone or silicone+plastic (Example: otterbox)
But I didn't like the colors of the otterbox...
I want a girly case, but a good one that can protect the cellphone

Choose whatever one you like the look of or the one that offers best protection:
http://www.amazon.co.uk/Hybrid-Rubb...OD50/ref=sr_1_1?ie=UTF8&qid=1339361087&sr=8-1
http://www.amazon.co.uk/Case-Mate-T...6IM0/ref=sr_1_1?ie=UTF8&qid=1339361108&sr=8-1
http://www.amazon.co.uk/HTC-One-Ski...WADS/ref=sr_1_8?ie=UTF8&qid=1339361087&sr=8-8
http://www.amazon.co.uk/Silicone-Sc...SSBO/ref=sr_1_2?ie=UTF8&qid=1339361087&sr=8-2
The case mate tough is a good alternative to the otterbox, you can see my review of the black case mate tough in my sig below.

Does the Case-Mate Tough better then Otterbox?

If you want girly, there's the pink & purple cruzerlite case. They look and feel great with no added bulk or weight.
Sent from my HTC One S using xda premium

LalyGirl said:
Does the Case-Mate Tough better then Otterbox?
Click to expand...
Click to collapse
IMO they are both just as good as each other, you aren't going to get any better protection using one or the other.
From what I have heard/read the otterbox is more plastic and doesn't use any silicone therefore it may/will be easier to get out of your jeans pocket (that is if you wear tight jeans )
The otterbox also has flaps for the micro USB port and 3.5mm jack, which will prevent any dust from gathering and just protecting those areas when not in use (too much faff for me )
Never used the otterbox case, but the tough does feel comfortable to hold in the hand even though it adds a noticeable amount of thickness to the mobile.
I personally don't like the otterbox looks/design at all.
Only complaint with the tough case is that it hides and ruins the minimal sleek of the one S and dust can gather around the edges of the screen on the silicone part very easily.
So up to you, go for whatever you like the look of best

Terminator19 said:
IMO they are both just as good as each other, you aren't going to get any better protection using one or the other.
From what I have heard/read the otterbox is more plastic and doesn't use any silicone therefore it may/will be easier to get out of your jeans pocket (that is if you wear tight jeans )
The otterbox also has flaps for the micro USB port and 3.5mm jack, which will prevent any dust from gathering and just protecting those areas when not in use (too much faff for me )
Never used the otterbox case, but the tough does feel comfortable to hold in the hand even though it adds a noticeable amount of thickness to the mobile.
I personally don't like the otterbox looks/design at all.
Only complaint with the tough case is that it hides and ruins the minimal sleek of the one S and dust can gather around the edges of the screen on the silicone part very easily.
So up to you, go for whatever you like the look of best
Click to expand...
Click to collapse
Then, from what that you said, I prefer the Otterbox

Here's the Trident Aegis case in pink:
http://www.amazon.com/Trident-Case-...6AAO/ref=sr_1_1?ie=UTF8&qid=1339421358&sr=8-1

jacewt said:
Here's the Trident Aegis case in pink:
http://www.amazon.com/Trident-Case-...6AAO/ref=sr_1_1?ie=UTF8&qid=1339421358&sr=8-1
Click to expand...
Click to collapse
I got the Diztronic pink glitter case and it is very adorable ; )

Related

case for DHD

hi,
can any of you guys please give me advice which case should i buy the case-mate pop or otterbox commuter.... the otterbox commuter seems nice but case-mate looks nicer more but at the same time it makes the DHD much bigger right? so if any of you guyz owns both that could give me the pros and cons of both of the cases thanks
Have a read of http://forum.xda-developers.com/showthread.php?t=819651
I went for a Casemate Barely There when I first got the DHD. But, I didnt think it gave quite enough protection.
I have just ordered a Casemate Pop from Amazon, being delivered tomorrow.
As far as I could tell, the Pop gave less bulk than the Commuter - but thats only looking at the reviews.
I have the case mate pop and case mate tough. If you want a good grip get the case mate tough, I still prefer the case mate tough which is a dual case (silicon and hard) over the pop.
I have the Otterbox Commuter and its not really bulky at all, in fact less than the silicone case I had. Offers very good protection and the volume and power buttons are very easy to use.
The USB and headphones socket has a nice cover, which stops fluff and other pocket stuff getting in the holes
Well worth the 17.99 from play.com, just wish I bought it first, as I've spent money on other cases!
Sent from my Desire HD using XDA App
Some people say that otterbox feels like it will fall off the device. And also is the screen well protected, raised from the table if resting on the screen. What is the material like, is it slippery and is it easy to scrach. Are there any problems that you noticed, and do you think that otterbox commuter case is worth its money ?
Thanks
Sent from my Desire HD using XDA App
The case will not fall off! It is raised at the edges so will offer protection if you lay it face down. The plastic feels fine, not dropped it yet though. Worth the money? Definitely cheaper than replacing the phone, although I'm sure it cost a lot less than 17.99 to make!
I would definitely buy another commuter case for my next phone
5kordez5 said:
Some people say that otterbox feels like it will fall off the device. And also is the screen well protected, raised from the table if resting on the screen. What is the material like, is it slippery and is it easy to scrach. Are there any problems that you noticed, and do you think that otterbox commuter case is worth its money ?
Thanks
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Sent from my Desire HD using XDA App
I got the otterbox case as soon as it came out and the plastic hard case has broken near the bottom above the charger/headphone flap. Anyone else had this problem? keen to buy try case-mate this time around. Otterbox's whole ordering system was such a pain
I have the commuter case and I quite like it. I feel much better about carrying my beloved phone around with it on. I don't think it makes the phone bulky. Actually I think it improves the way the phone feels in your hand ALOT. You really notice it when you write in landscape mode. It fits much better into your hands and it makes a better writing experience.
The outer plastic layer feels very tough, and I think it will be hard to make a visible scratch on. The silicone layer inside wraps around the phone nicely and does the job with protecting the screen when you put it screen down/drop it screen down... BUT the silicone wrapping feels a bit thin, and the one at the bottom of the phone is a pain in the ass. It will definitly fall off in the end. It's very loose and my finger keeps lifting it up when I swipe my finger into it...
SO I baught a Case-Mate tough case. I havent received it yet so I can't say much about it, but it looks badass.
I have CM Pop - he like scratches...
is there anyone that has both the otterbox commuter and the case-mate pop so he could tell me which one makes the device bigger. and also i wanted to ask if otterbox commuter is the same thing as case-mate tough -same size.. tnx
I saw comparison Pics of the commuter and the Pop and the Pop Case makes the DHD a lot bigger! It looks nice but I donĀ“t want a bulky smartphone so yesterday I ordered the Otterbox Commuter.( and the Defender..which actually makes the phone bulky but I want to see how the screenprotector works )
5kordez5 said:
is there anyone that has both the otterbox commuter and the case-mate pop so he could tell me which one makes the device bigger. and also i wanted to ask if otterbox commuter is the same thing as case-mate tough -same size.. tnx
Click to expand...
Click to collapse
There 's some images? Thanks
Yea some pictures would be great...
Sent from my Desire HD using XDA App
my recommendation is case-mate barely there .. it has no bulk , but is low on protection.. you get screen protector with it ..
my friend's phone drop with case-mate barely there , it landed on concrete and not a scratch.
I love the otterbox commuter! Makes the device feel better when holding it. There's no way in hell that this case will fall off if you drop the phone
the pop case is better imo, snug fit and a nice color scheme!
Dont buy cheep china cases they colored your phone
I have an Otterbox Defender, that turns the phone into a real monster of mobile communication. It's very big and heavy, so it's not suitable for all people. But if you use your Phone for outdoor activities, there's no better case.
en3s said:
my recommendation is case-mate barely there .. it has no bulk , but is low on protection.. you get screen protector with it ..
my friend's phone drop with case-mate barely there , it landed on concrete and not a scratch.
Click to expand...
Click to collapse
I also can recommend the Case Mate barely there. The screen protector is very good.
Barely there is a very nice one. I've used it for quite a while, but now i prefer my htc kickstand case with leather finish. Looks great, slightly thicker and heavier than barely there.
O and why stick a piece of plastic on a screen that doesnt need protection in the first place
Sent from my Desire HD using XDA

[Q] What case is better Otterbox Commuter vs. Casemate?

I saw reviews on the Casemate but not the Otterbox Commuter and I was wondering by experience which of the two are better and why?
I never tried the Otterbox but I do have the active Seidio vase and Casemate Tough. The casemate is one solid case. Protection all around and it feels great.
Anyone else have any more thoughts? I was going to post the exact same question until I used the feature to search
joogle said:
Anyone else have any more thoughts?
Click to expand...
Click to collapse
I have the Case Mate "Barely There" and I must say it is exactly what I expected.
Good protection for the phone back, sides & lower part. The upper part (at the power button) is less protected as you can see HERE but for me it will do.
The design is perfect, it fits like a glove; all case openings for camera lens & volume buttons are at the good location, see HERE & HERE!
Also, the cover is very thin (but still plastic so still better protection than rubber) so the design of my precious Sensation isn't ruined by it.
Finally, I'd suggest to use an original HTC screenprotector together with this case. Your phone will last for years that way. I tried an external party screenprotector but that was a waste of money because of the worse fit.
Hope this helped you a bit, as you asked for Otterman comments
I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.
Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
snoop101 said:
I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.
Click to expand...
Click to collapse
Case mate tough case is better, otterbox seemed like cap and the silicone surrounding the phone was just bad
Sent from my HTC Sensation using Tapatalk
with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.
are you referring to the case mate or otterbox?
skylinejay88 said:
with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.
Click to expand...
Click to collapse
joogle said:
Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
Click to expand...
Click to collapse
the usb ports function well, the flap closes alright a little hard to open and close and i have used case for about four months and the silicone surround is starting to wear a bit but this is because i remove my phone frequently to use with my desktop cradle. I like the design of the otterbox more it is more ergonomic in my book. Here the way i look at it for the money casemate is a just as logical choice as the otterbox. I prefer the otterbox just becasue i like there product and had never used a casemate before. So in my opinion otterbox.
ballistic
try the ballistic case, its awesome, and its cheaper than otterbox, i bought mine off ebay, it has a silicone plus a hard plastic cover on top of it, its very cool
I've got the Casemate Tough on mine. Had it since December, and it's a great case.
Nice and grippy in the hand, but won't stick in your pocket like the silicon ones can.
The only gripes I can have with it are that it's a pain to disassemble to pull the battery or the SD card, and it could do with being in a few different colours.
I always like bright cases on my phones (yellow is a particular fave) because I do a lot of fishing, and it's always easier to see something bright yellow if you drop it or put it down in a hurry!
I'd say it's worth the money.

Thinnest "Tough" Case?

Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
the otterbox's rubber on its case looked low grade compared to the seidios and case mates. it looked like what trident was using..
i was looking into the naztech but i didnt like how there is a bar on the top of the screen lol. id like to see a review on it. might get the case mate pop
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
fireishott said:
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
yeah.. and if you watch the video reviews on it they didnt seem to pleased either lol. im dispointed in otterbox for this case.
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
galaxyhtc said:
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
Click to expand...
Click to collapse
Yeah it was super easy due to the hard plastic that covered the silicone layer that is one thin I miss about it and am still on the fence about putting it back on. I will say my phone survived a few high drops ( I am a cable tech and it fell from a ladder about 18 feet to concrete with out a scratch)
Sent From My HTC Sensation 4G powered by Sense-O-Matic
Wow, you just made my decision harder.... !!! Haha thanks though, i'm sure i can't go wrong with either of these cases, but I just want to know which is the best.
OK, I'm pretty sure that the Tough Case and Vertex are out:
Tough Case: I saw that the rubber wraps around the screen on the phone, and can attach lint, also, it does seem a bit bulky.
Vertex: Lack of information is difficult. From the pics I don't think it'll work out for me.
Personally I use zagg skins now. They are seriously epic. I have always hated all phone cases because of the bulk they add no matter how thin. But the zagg skins are tough...real tough. And add essentially no weight/thickness to the device. When I got mine i was trying to scratch the back and screen to no avail. zagg also offers a lifetime warranty, but I have no idea what their limits are on it. Plus you can customize it with any picture you want.
Just my opinion. Good luck with your choice.
I have both Case Mate POP and Otterbox Commuter... otterbox has far better plastic because it cant get scratched at all. The case mate pop looks like it's 10 years old after a week. Still I user POP rather than the otterbox because the rubber on otterbox is like a MAGNET for all the dirt that is around you. I used to clean the rubber, and put it in my pocket, and when I get it out it's entirely covered with dust... I don't even know what were they thinking when they were making it. Another thing about the otterbox is that the earphone jack cover never fits like it is supposed to.
I ordered this a week ago because it looks funny
http://www.case-mate.com/HTC-Sensat...-Sensation-Sensation-SE-Tut-Silicone-Case.asp
I will order the case mate tough also... I hope that will be what I want at last
Wow, thanks for the info! So which one of those has a thinner/less bulky form factor, and is easier to get in/out of your pocket?
Case
I bought a Yoobao case off of Ebay, I love it. It is very tough and thin holds the phone tight.
Ehh, thanks for the info, but I already have a TPU and while it is nice and slim, I want something with a little more protection.
I'll put my two cents in, I just got the vertex and I'm very impressed. I've had the commuter and didn't like it. The plastic seemed cheap to me and was too slick. I also had a tpu case that was ok but I didn't think it would protect very well and made the power difficult to press. The vertex is quality, looks and feels very nice and fits great.
Sent from my NookColor using xda premium
Hi, thanks for the input! Does the back material make it easy to get in & out of pockets easily? And also, is it thinner than your otterbox?
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Well, I've been on these forums reading for about 5 months now, but this is my first post...
I've had the Casemate Tough Case for the same amount of time I've had my Sensation; about 5 months.
The tough case's hard backing makes it very easy to slip in and out of your pocket. The only exposed rubber is a small section at the top and bottom of the phone and a very thin rim around the screen, the rest is the hard plastic. I never notice that it's collecting lint\dirt, except when I remove the case, there is a small rim of dust collected under the rubber rim, but you can't see it until the case is off.
The exposed rubber parts always look clean and smooth, same goes for the hard plastic outer shell.
The farthest I've dropped my phone with the case on is off the bar... so maybe 4 feet or so? No damage to the phone or the case.
I haven't tried out any other smartphone cases, so I don't have a large frame of reference, but I haven't had a single issue with the tough case. Hope this helps!
master1454 said:
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Click to expand...
Click to collapse
Have you actually tried the naztech case? I'm sitting here right now literally starting at it trying to find a problem with something and I can't. I can't compare it with the tough case but its better than the otter.
Like I said before, and I don't know if this even matters, the naztech has cut outs for all the holes on the back cover, none of the other two piece cases have that feature.
As far as the plastic, the naztech has a rubberized back which makes it easier to hold than the otter but still slides into a my pocket easy.
i think you guys should check momax case....
For what it's worth...
I picked up one of these on Amazon:
http://www.amazon.com/gp/product/B0055DHCKS/ref=oh_o00_s00_i00_details
Inexpensive, fits very well, easy to slip on and off, isn't a lint magnet, reminds me of the great Boxwave slip cover I had on my Nexus One.
Highly recommended.

What's the best case for this phone?

I need to get my self a case but a good durable case any suggestions ? Give me names and pictures of cases ? Thanks
Sent from my SGH-M919 using Tapatalk 2
yobebo2x said:
I need to get my self a case but a good durable case any suggestions ? Give me names and pictures of cases ? Thanks
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Otterbox commuter, i love it:
http://www.amazon.com/OtterBox-77-27604-Commuter-Series-Samsung/dp/B00C96CGN2
yobebo2x said:
I need to get my self a case but a good durable case any suggestions ? Give me names and pictures of cases ? Thanks
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Personally for protection and looks I like the Spigen Slim Armor the best. It's not very bulky, but still offers good protection. For good reviews and pictures take a look at the posts around this section. There are plenty of great reviews.
Ballistic aspira. Not too thick, but great protection. Love the colors too
sent from my stock me7 galaxy s4
I'm really liking my UAG Navigator in white:
http://forum.xda-developers.com/showthread.php?p=41548103
Spigen Neo Hybrid, Dante Red looks pretty sweet. Gets a little distorted from a wirelesss charging pad, but otherwise very nice looking.
I personally use 3 cases, the official Samsung Protective Cover+, Spigen Neo Hybrid and UAG Navigator! All 3 are slim protective cases!
Otterbox commuter has protected my S4 from several drops ranging from 3-5 feet onto various surfaces including concrete! Couldn't recommend anything else.
Really love my Spigen Slim Armor Cases. They are the best looking case I have ever used. I will probably get an Otterbox Commuter or Defender for Outdoor activities. I have used them on other phones and really liked them.
it depends if you want protective case and don't care if the phone become bulky or want non bulky phone and good protection.for the first option i recommend otterbox commuter. for the second option i recommend uag .
I personally prefer the otterbox as well.
Sent from my GT-I9505 using XDA Premium 4 mobile app
If you like not being able to plug in headphones/chargers with the case on, go for the Spigen Neo Hybrid.
If you want the same protection, an OEM look, and wider ports that allow for plugging in with the case on, go for the OEM Samsung S4 Bumper Case.
You can find both (by copying & pasting the names I wrote) on Amazon.
I would wholeheartedly recommend the UAG case. It's the first case I look for when I buy a new phone.
To me, it's the perfect case.
Sent from my GT-I9505 using Tapatalk 4
I'm using the otterbox the commuter series, and liking it. Not too bulky.
So my Seidio Convert case for the S3 fits the S4 mostly.
You will have to cut the volume controls a bit if you want to use the inner plastic shell but I just skipped on it.
The rubber shell and exoskeleton together are enough to keep the phone in the case - even if a bit of wiggle is there - and you can use the volume and power buttons, the IR blaster is exposed and works well.
The headphones jack doesn't line up, but the power and camera do - so it'll do for a few days until I get this in:
http://www.amazon.com/Seidio-CSWSSG...TF8&qid=1379369652&sr=8-11&keywords=seidio+s4
I used to go for otterbox cases, but after getting my first Seidio case I will never, ever use an otterbox again.
The seidio convert case is far and away superior to the defender case from otterbox - the convert case has an inner plastic shell that slides together, instead of clipping together, and then the rubber shell goes over with a second plastic exoskeleton that keeps the rubber in place.
Not only that, but where the defender is basically a brick-type shape, the convert case is contoured and feels nice in your hand with it's rounded edges and ribbed sides.
They are about the same size when all is said and done, so i'd rather hold a convert then a defender.
That waterproof case is going to be the best decision I ever made for this device, I am sure of it.
Blue6IX said:
So my Seidio Convert case for the S3 fits the S4 mostly.
You will have to cut the volume controls a bit if you want to use the inner plastic shell but I just skipped on it.
The rubber shell and exoskeleton together are enough to keep the phone in the case - even if a bit of wiggle is there - and you can use the volume and power buttons, the IR blaster is exposed and works well.
The headphones jack doesn't line up, but the power and camera do - so it'll do for a few days until I get this in:
http://www.amazon.com/Seidio-CSWSSG...TF8&qid=1379369652&sr=8-11&keywords=seidio+s4
I used to go for otterbox cases, but after getting my first Seidio case I will never, ever use an otterbox again.
The seidio convert case is far and away superior to the defender case from otterbox - the convert case has an inner plastic shell that slides together, instead of clipping together, and then the rubber shell goes over with a second plastic exoskeleton that keeps the rubber in place.
Not only that, but where the defender is basically a brick-type shape, the convert case is contoured and feels nice in your hand with it's rounded edges and ribbed sides.
They are about the same size when all is said and done, so i'd rather hold a convert then a defender.
That waterproof case is going to be the best decision I ever made for this device, I am sure of it.
Click to expand...
Click to collapse
I hate to admit it but the new Otterbox Defender is actually pretty nice. It seems slimmer than previous models and feels good in my hands.
I also like the color options now available. I found replacement frames and rubber sleeves on Amazon for like $5 each so I can mix up the colors. I have the Samsung wireless charging back on it which fits in the case and charges fine. The raised edges don't bother me like they did in previous models where they felt like they impeded my typing. I have to say I'm impressed with overall improvements to the case. I tried the Convert but prefer this. On top of all that, this like Seidio are quality built cases so you know proximity and gps etc...all work fine.
I have probably about 15 cases from thin to bumpers to bulky but this actually works pretty well for me. I've gotta calm down on the case venture!!! The Love Mei large case is on a shelf after the issues I experienced with it.
I need to have a phone case garage sale.
Best
case
EVER!
http://www.aliexpress.com/item/1PCS...rtable-Power-Bank-Charger-Case/905708120.html

improve grip without adding bulk?

I really like how the premium materials on the s6 feel but it's likeholding a piece of ice dipped in lube.. crazy slippery. this also makes for very awkward hand positioning if you dare use one hand (which i attempt to do).. this phone is already kinda too-big for me ... also, it's incredibly insecure inside a pocket. if you lie down, it will fall out. if you're wearing something loose like sweat pants and sit down, it will fall out..
i'm looking for a solution to improve grip but i HATE cases .. especially on a phone this big. something like a skin/wrap seemsperfect but I'd like to know how much grip these add. Ideally, I feel like 2 thin strips of a grippy vinyl along the edges would be enough but more realistically, a full back wrap would likely be the way to go.
dbrand and slickwraps seem to be the most popular ones. i like the look of the leather wraps but it seems like they feel more like paper in person (based on youtube reviews). I wish someone made a clear full-back cover made out of a gripper plastic (like old school palm pilot screen protectors).. that would likely work.
anyone have experience/recommendations?
The InvisibleShield HDX by Zagg works really nicely for the S6.
I've got to say, though. Nothing could be more slippery than the HTC One M8. Awesome phone, but very slick.
The official Samsung shell case adds some grip while still retaining the look of the phone. It's lightly textured hard plastic.
I remember seeing a post a long time ago where someone sprayed Plasti-dip on the back of their phone. I'm sure that would definitely add grip, and it is reversible. Not sure it's something I'd want to do, but it is an option.
Just did a quick search :
http://lifehacker.com/5716776/diy-rubberized-phone-backing
P.s.- you can get Plasti-dip in multiple colors, including clear.
I am really loving The neo hybrid by spigen.
Probably a bit thicker than a skin, but still minimalist, try the Spigen thin fit BLACK color. The other colors (maybe there aren't other colors for the S6?) are slippery. The black one has a very nice grip, but still easy to take out of pockets. Also, it protects the camera lens .
I have the Samsung shell case, seriously its like having no case on the phone but does add grip
http://pages.ebay.com/link/?nav=item.view&id=121605073646&alt=web
Comes in other colours.
a suggestion
You might want to look at the Tech21 Evo Check at Best Buy. It adds very little bulk to the phone, but a whole lot of grip. I'm waiting for an Urban Armor Gear Outland to be delivered , and although the Tech21 case is not cheap, it gives me peace of mind until the UAG arrives.
I got a spigen clear flexible skin on ebay for around 12 dollars. Very nice slim and adds a lot of grip and still lets the phone shine thru
I got dbrand leather carbon finer skin for the back. It's less slippery to hold and no bulk added.
there is really not a solution for you.
Just get a SUPER thin case
I always found adding a cheap clear skin protector on the back add just the amount of grip you need. Worked for the Sony Z3 as well as htc one M7/M8 from my personal experience.
You could wrap your phone once around with Saran Wrap. Might look a little funky, but it will give you some more grip.
if you don't want a case but want grip and never drop your phone then checkout the flygrip it uses double sided adhesive to attach to your phone and also works as a kickstand in potrait and landscape mode , been using it for years on all my devices , but if you wireless charge then it will get in the way and wont work
I bought a pure gear case. Very slim with rubber siding and clear!! I've used them on several phones. Great feel and low bulk. I also added a screen protector
Sent from my iPad using Tapatalk
I know these are expensive but they seem to be a great quality and are truly the thinnest case I have ever seen. You should be able to try them out at your local Best Buy to see if you like it.
http://www.evutec.com/category-s/1904.htm
polo79 said:
I know these are expensive but they seem to be a great quality and are truly the thinnest case I have ever seen. You should be able to try them out at your local Best Buy to see if you like it.
http://www.evutec.com/category-s/1904.htm
Click to expand...
Click to collapse
Love those descriptions hahaha japanese warriors wore what these cases are made of... hahaha . It's really just plastic, guys, come on.
jadaress1 said:
I have the Samsung shell case, seriously its like having no case on the phone but does add grip
http://pages.ebay.com/link/?nav=item.view&id=121605073646&alt=web
Comes in other colours.
Click to expand...
Click to collapse
hello dont agree, i think its a very well made case, if the case drop, it will hurt one of the corner and will preserve the metal part,try to put the phone on a table in all position you want, the lens and metal part will never in contact with anything (sorry for my english

Categories

Resources