i would like to install cm7.2 kang or better on internal memory of nook color. im a noob, although i do know a little. if someone could point me in the right direction id appreciate it. i read so many threads and tried searching only to read more threads that didnt lead to any help. I dont care about the stock nook rom it blows, just want the strongest and fastest android rom possible that doesnt run off SD. no problem with installing it off sd if possible, just dont want it to stay there. i installed "signed cwm oc dual w/oc kernal & wifi fix, it boots to b&n no prob, but cant boot cm7. held down both volume while powering and it says booting other but just goes to CWM. Thanks in advance for any help. Id prefer stand alone cm7.
Related
I am running 2.3.4 VUVKG4 on my SGS4G. Has anyone successfully gotten clockwork recovery on this device yet? I have tried multiple ROMs from this page, some brick my phone and I have to start over. Usually I am flashing with ODIN but not married to it. No matter what I have flashed, 3e recovery still remains.
This is a huge problem for me and I am guessing others as well. Without clockwork it makes things a lot more complicated.
If anyone has some kind of advice/tutorial/success story, I would love to hear it.
if you go in the sgs4g dev section, there are ALL KINDS guides for everything. if you are in the process of trying to get a GB rom on your device... this is your guide to do it.... in the midst of the process, you will be blessed with the red cwm that we all know and love...
http://forum.xda-developers.com/showthread.php?t=1215748
hope this helps
This is huge. I havent seen a decent instruction set written like this for many. Im going to give this a shot tomorrow and see if this does it. I actually think this is the kernel i am using.
onyx1898 said:
if you go in the sgs4g dev section, there are ALL KINDS guides for everything. if you are in the process of trying to get a GB rom on your device... this is your guide to do it.... in the midst of the process, you will be blessed with the red cwm that we all know and love...
http://forum.xda-developers.com/showthread.php?t=1215748
hope this helps
Click to expand...
Click to collapse
BTW this works. That was a great tutorial as well. I already had half of it done so it was just a matter of flashing the new kernel. rebooted right back into clockwork. Only thing I need to do at some point is ext4 my SD card to use lagfix but im in no rush.
hi guys i have a evo 3d gsm i rooted with revoulutionary worked great i have s/off i also have been running leeroid kernel with infected ethernety rom for he past month i have always used rom manager to load roms and always worked well so i tried to load a red theme without reading much on it and i ended up getting into a boot loop and i cant fix or flash any new roms to fix this problem because the clockworkmod recovery dosent respond it just goes to a black screen with a hat, i have tried to use fastboot to flash a new recovery but i guess im still new at this and im kinda stuck im like the only person i know up here in montreal that messes with androids so i could really use some detailed instructions on a soultion im not finding any threads with a real understanding of what i could do to fix this any help is would help thanks
Somebody please help
Can someone please giver some direction to at least reinstalling clockwork mod through fast boot please
did you make a back up of your rom before you flashed infected? flash your back up.
Yah I made a backup a few weeks back but Shari think I need to do is install a new recovery through fast lot but I'm not sure of how to do it some people say to use sdk it I don't know what I'm doing I'm kind of a noob at this stuff
who's Shari? anyways I would flash my back up and see if that resolves the issue but its up to you, I don't take any responsibility on what happens.
Sorry I don't know who Sharri is either lol miss spell but anyway that we're my issue is cuz I can't flash anything cuz clockwork mod recovery doesn't work every time I try to use the options it just goes to a black screen with a hat I can't even reboot I have to pull the battery to get out so I'm looking to do is flash a new recovery so I can try a restore of my backups but I'm not sure of how to do it
Hey guys i`ve recently managed to get an SGS 4G Vibrant ( i believe that i am at right place to seek for help ) , i have the T-Mobile version of the phone. I need help switching to different/better ROM, at this moment the phone uses the stock one ( or i believe so ). I`ve been tru the threads and saw that there are a lot of stuff posted about what you need to do/have to flash a rom, but i just cant understand the right order of doing the things.
If its posible can someone really quick just post the steps for the guide for flashing a ROM to the phone. I have previous expiriance with android phone and i am aware how thing go, just as i said i cant get the right order of puting all the thing at one place.
For the phone i used to have was like, first i had to install an stocklike ROM which had recovery, but before that i had to get some kind of software for LG that alowes to flash the rom via download mode. So is the same here? It would be awesome if someone can link or atleast type all the software and other thing i need to have installed to make this work. For now what i have is the USB drivers for Samsung.
Thanks in advance!
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
sent from me
Ok, that helped, not sure how i missed it. I am gonna write down what i did so far, so you could see if i messed up something.
I rooted the phone via SuperOneClick 2.2, then i installed the SGS Kernel Flasher, and then flashed the kernel, my current phone was running an 2.3.7 android, so i used the Basic with a Twist`s kernel ( i hope i did it right ), and now the phone rebooted and some different boot screen apiared with some Robotic Chick speeking some stuff, BUT for now the phone load to there, it doesnt wannt to load.
So did i messed up something, or ....
Can you go into recovery by holding Volume Up+Volume Down while pressing the power button and as soon as the SGS 4G splash appears leaving the power button ?
If so and you can see CWM Ver. 5.0... then kernel was successfully flashed.
You shouldn't be getting a bootloop.
What ROM do you want to flash ? If you want to flash GB then I suggest Barebone/Valhalla of some kind.
If you want ICS - Go to the CM 9.1 thread and follow the instructions. After that you may change to AOKP or MIUI or all the rest of the ICS ROMs you wanna try.
invictos said:
SGS 4G Vibrant
Click to expand...
Click to collapse
This section is not for the Vibrant.
Check here: http://forum.xda-developers.com/forumdisplay.php?f=708
I am sorry I do not know how to get you back to where you started before flashing the wrong ROM.
Good luck
Well, it wasnt a bootloop, it just loaded to some point and stoped. Gladly still got the download mode and brought it back to normal to how it was. Thats why i came here to ask, `couse there are too much similiar sgs`s and stuff for them here, i just got confused whats what. Got to start from scratch anyway, at least i didnt bricked it
http://forum.xda-developers.com/showpost.php?p=21953587&postcount=1 <---- That's a post by Lumin 30 with a guide on how to get from stock to custom GB. If you want to get to ICS then use CWM 5.0.x.x.
hey everyone!
yesterday, I got really tired of froyo so I said ''f$%? it, lets try to root my phone and install jelly bean, that look really slick!''
. well looks like everyone as to start somwhere..
so my problem right now, I am stuck at the custom LG logo, I cant hard reset and even my recovery boot but the menu wont pop up and simply restart my phone..
basicaly, I feel screwed right now does anybody can help me on this?
it is probably something super stupid and simple but I can'T find any solution so I decided to join this forum for a bit of support..
EDIT: my mistake, it went in the wrong section
thx a bunch!
Usually run this when I cluster f my phone
http://forum.xda-developers.com/showthread.php?t=1590523
thanks for the cue, I will also try this. and keep you posted if it worked or not..
better way to learn is to make mistakes!
http://forum.xda-developers.com/showthread.php?t=1180331
ok, most of the link to download the needed files are dead... I might have to rely on your support guys.
the http://forum.xda-developers.com/showthread.php?t=1180331 thread didnt helped enough..
Did you install the adampk rom?
Sent from my LG-P999 using xda app-developers app
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
dubmah said:
WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed
Click to expand...
Click to collapse
I say you needed to use the g2x android development forums on this site to find a suitable jb rom, not this other site. The one click method isn't very stable, so nvflash is most definitely what you need to try to get working. There are very thorough tutorials on how to get that to work. Do you know which clockwork recovery version you have installed? Should be 5.0.2.0. Once you get home, I suggest you read read read. Do as much research you can to make sure you can follow nvflash instructions to the letter. I know I personally spent about a week researching to make sure I had a solid understanding of the procedure.
I recommend getting nvflash going to get clockwork properly installed, then download a rom from xda, nowhere else. I would even say use a gb rom before trying a jb ...the jb roms are hackfest versions, so they have (from my experience) much poorer battery life, and lack hardware acceleration. Netflix and many 3d games won't work. You can use adampk or mazout's roms but they don't have working radio, i.e. no phone/SMS functionality.
Sent from my LG-P999 using xda app-developers app
dubmah said:
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
Click to expand...
Click to collapse
Boot into recovery, there should be an option to format or wipe system. Do that then flash the ROM. It won't boot if you flash it over stock.
Also, use the paranoid android rom found in the development section, same cyanogenmod base but works better.
Sent from my Nexus 7 using Tapatalk HD
great ! thx for the advices ! yeah I Will read some more first, making sure I do thing properly, for now, I will try to revert at least to my backup and wait til I know what I'm doing!
thx again, I keep you up about the progress !
progress!! .. I tried to start my phone without the battery.. my pc recognized the phone for about 10sec and then the icon disapeared and until then, nothing I plug I start there is no way I can make my pc to recognize the phone...
does this happened to anyone before?
allright! I have bean reading about the NVFlash! that help A LOT! actually it almost fixed my thing! the phone is now unbriked YAY
I just keep replying to myself incase there is another guy who dont know crap about the obvious, if it can help the thread worth it
I used this tutorial to fix things,
http://forum.xda-developers.com/showthread.php?t=1248644&highlight=nvflash+steps
My main issue was the APX driver wich wasnt installed.. now I know bit more, I still have issue but luckily things goes forward so it gave me the boost to keep working on
but I face a new problem so maybe some of you might be able to help on that new issue
I am from montreal and here in quebec we have videotron instead of t-mobile and since I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
hope it helps
dubmah said:
I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
Click to expand...
Click to collapse
What do you mean by "T-Mobile boot" and "videotron thing?"
Sent from my LG-P999
---------- Post added at 10:09 PM ---------- Previous post was at 10:02 PM ----------
Ok, wait I think I understand what you're saying now. If you can, pm the op of that thread you used to unbrick. Ask that person if you need some kind of different file in that .zip file to work on your carrier.
I remember having to use that guide to get back to stock. Glad to see you're making progress. I know it can be frustrating when devices get wacky. Good luck!
Sent from my LG-P999
hehehe sorry, I am not fully used to the right terms so I rather stay in the gray zone by using words like ''thing''
but I can now oficially say I was talking about ROMs
finally, I managed to bring back my phone to the stock mode everything seem to work!
now I can brick it again!
thx for the help!
I began to wonder if it was just a matter of changing APN settings?
Sent from my LG-P999
this, or... putting the simcard in the properly? !!
Hi guys and girls. Noob here with just enough knowledge to totally f stuff up. Any ways, I have a Galaxy S model sgh-t959v. I rooted it and installed Bionix rom from team whiskey. I used this one because at the time, it was the only one I could find that would actually load on the phone. I was probably trying to use the wrong roms or whatever. Any ways, I am now experienceing the low mem lvls and various problems. Basically I would like to start fresh and brand new, clear the phone completely and install a better rom. I did a seach on the forum and there are several posts on how to fix the low mem problem, but for some reason my phone wont reboot into a state taht I can install them from sd card. It only gives me the option to wipe data, no install from sd card. Any help would be appreciated. Thanks and have a great new year.
Jimbo
use one click heimdall !
you must boot it into download mode..
just search it and the procedures are on it
root-flash kernel-flash rom thats it