Is there any way to sync Windows Phone 7 via Wifi with computer connected to LAN network .
I've got one pc,router and Windows Phone
If i add WiFi network card to the PC and connect both WP and PC to WiFi syncing is working fine.
If i remove WiFi network card from the PC and connect with LAN cable to the router WiFi syncing is not working any more.
Is there any way to fix this issue or it is by design ?
I started to capture network trafic with netmon but after 10 minutes not a single packed is addresed to my PC . That is realy annoyng.
On theory WP should broadcast packets and Zune should "answer" .
I tryed to start Zune Wifi sync service manualy but still got the same results.
edit: It seems that WP7 sends IGMP packet to the multicast address an then SSDP packet to inform what sertvice "hosts"
On the other side when i am connected trough LAN cable no such information is transfered.It seems that nothing comes to the multicast addressess 224.0.0.22.
Related
Hi there,
Just got a new qtek8310 with Windows mobile5 and activesync version 4.1.0 build 4841. Using it with a computer connected to a windows domain network.
The computer have enabled offline files, (can view/edit files in offline mode etc) This is build function in windows xp.
However when I sync the mobile device sometimes it drops the connection to the network and puts me in offline mode with the network, I need to resync offlinefiles to re-establish the network. This happens randomly, often when I connected the device. I think has something to do with the new network adapter it creates everytime you connect the device to sync (breakes the currently connections?).
The sync with contacts etc from outlook works 100%
I followed instructions ActiveSync 4.0 USB Connection Troubleshooting Guide
at http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Still same problems, It has same effect with or without firewall enabled (xpsp2)
anyone same problem / clues ?
thanks.
Any solution to this? I'm still going through the search results but my customer w/ the save AS version has the same problem with 2 diff phones on 2 diff workstations.
When I connect via USB to my Vista machine (I have Hermes, BlueAngel and Artemis) I get disconnected from the internet (I use a 3com router).
The same happens when I disconnect the USB.
Any Ideas?
any ideas?
I'd like to know as well... happens all the time and it's very annoying!
not sure about vista but with xp i had issues connecting to a wired network without internet while being connected to a wifi which had
to fix that i went into the network properties and picked my wires network
and picked properties for tcp ip
and advanced and changed the metric to a value lower then the value i set for the wifi
and that fixed it
i'd asume the same thing would work for a connection over the phone
hi there!
i got an umts enabled device. i connected it on my laptop and use it though ics (active sync).
now another laptop is connectet with an crossover cable to mine.
the problem is:
how to share this active sync ics umts connection to the other client?
thx 4 help
well, you can use Wifirouter to create an access point and connect with more than one comp
if you want to share the connection thru your laptop... to my knowledge, you'll have to go to control panel.. and go to the network card's propeties and enable
the sharing of internet connection. this option varies depending on your OS... so just search for it.
I have an issue with a Sprint TP2 with WIFI. I'm able to connect the router but not able to access the internet. If I connect my phone to the laptop I can use the internet if I change the (Connections:connections: network management) from Sprint to My Work Network but I'm not able to connect via WIFI. I have (Connections: wifi:configure network adapters) to WORK or THE INTERNET for Broadcom 802.11 DHD Network Adapter but it doesn't help. Under Connections: tasks:MY WORK NETWORK:Set up my proxy server I check the box next to THIS NETWORK CONNECTS TO THE INTERNET but it won't stay checked. The profile for the router has been deleted and recreated with no success. I've tried other WIFI routers with no success. My touch pro has no issues. BTW: I'm using version WM6.5.
My android phone is usually on wifi at home. My laptop has some wifi chip/antennae issues so I have to either connect to the network via a lan port or, alternatively, use android phone usb tethering. If I am connected via the latter, on the laptop I observe that I cannot connect to the router network - I cannot even access the router login page.
I don't know a simple term for this feature. I guess it works like a network switch. But is there any app that, when enabled would help me connect my laptop (when usb-tethered) to the wifi network?