I'm not able to get mobile internet (3G) on custom ROMs on my phone. I unlocked my bootloader using HTC dev, then rooted my phone using this guide to the letter, except I have now tried several ROMs and internet works on none of them. Normal phone network (2G) works and WiFi works, yet I am not able to get mobile internet. Please help.
Are you separately flashing boot.img by fast boot each time you try a new ROM?
Swyped form ym Dersie S unsig XAD Permuim
ben_pyett said:
Are you separately flashing boot.img by fast boot each time you try a new ROM?
Click to expand...
Click to collapse
Yup.
I'm also on Talkmobile. Have you changed the APN settings as I have never yet found them correct in any ROM. The provider guidelines are here http://www.talkmobile.co.uk/settings/settingsandroid1.html but I always just end up setting 2 APN entries - a default one for mobile internet and a separate one for MMS.
First APN (Set as default)
Name: Talkmobile
APN: talkmobile.co.uk
Proxy: 212.183.137.12
Port: 8799
Username: wap
Password: wap
MCC: 234
MNC: 15
APN Type: default, supl
APN Protocol: IPv4
Second APN (For MMS)
Name: Talkmobile MMS
APN: talkmobile.co.uk
Username: wap
Password: wap
MMSC: http://mms.talkmobile.co.uk/servlets/mms
MMS Proxy: 212.183.137.12
MMS Port: 8799
MCC: 234
MNC: 15
APN Type: mms
APN Protocol: IPv4
Went through that process and it worked! Thankyou
Related
Oh my goodness I have been trying everything & I CANNOT get my APN settings correct.
I have a clean install of SuperCSDIv4 on my MyTouch 3G
Here is what I have so far for my APN settings
Name: T-Mobile US
APN: epc.tmobile.com
Proxy:
Port:
Username:
Password:
Server: *
MMSC: mms.msg.eng.t-mobile.com/mms/wapepc
(with http at beginning, can't post links due to a new user account)
MMS port:
MCC: 300
MNC: 260
APN type:
Those do NOT work UNLESS I put in a password
I have tried, 0000, 1234, and both work only sometimes!!!
PLEASE HELP
What are the DEFAULT settings for Tmo APNs on Android???
Anyone?
I recently rooted my AT&T Nexus S (i9020a) and then after installing a rom, I discovered that my mobile data (3G and everything) was no working. The WiFi works fine but I can't call or text ;( Please help!
zjr51 said:
I recently rooted my AT&T Nexus S (i9020a) and then after installing a rom, I discovered that my mobile data (3G and everything) was no working. The WiFi works fine but I can't call or text ;( Please help!
Click to expand...
Click to collapse
make sure if aeroplane mode is off...
if its off then check if ur sim is properly inserted and that ur neuxus s showing the operator name
zjr51 said:
I recently rooted my AT&T Nexus S (i9020a) and then after installing a rom, I discovered that my mobile data (3G and everything) was no working. The WiFi works fine but I can't call or text ;( Please help!
Click to expand...
Click to collapse
Try this: go to settings, under wireless and networks, choose more settings if you're not on MIUI, and if you're on MIUI, skip this. then, choose mobile networks, access point names, delete everything there, then type in the following:
Name: AT&T PTA
APN: pta
Proxy:<Not set>
Port:<Not set>
Username:<Not set>
Password:<Not set>
Server:<Not set>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type:<Not set>
APN type: default,admin,fota,mms,supl,hipri
Back up APNs for if PTA doesn't work for you.
APN 1: (This is a Legacy APN and is typically not needed, unless you don't get HSPA+/3G in your area)
Name: AT&T
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,supl,agps,fota,dun
APN 2:
Name: AT&T HSPA+
APN: phone
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,supl,agps,fota,dun
APN 3 (SELECT THIS ONE WITH THE GREEN DOT):
Name: AT&T LTE
APN: pta
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,internet,supl
Doesn't work? try flash an AT&T radio here: http://forum.xda-developers.com/showthread.php?t=1116884
I have been looking for this info for hours today and can't find a simple response.
I tried the *#*#4636#*#* trick, it doesn't stick.
Can someone post APNs that force 2G, 3G, and 4G non-LTE for the AT&T One X?
Is there a working mod that installs a toggle for this?
4636 trick is working fine for me.. but i'm not in AT&T..i'm using it in india and using cleanrom std.
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp
theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
theartialmartist said:
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp
Click to expand...
Click to collapse
Its a known issue and it happens with everyone. Most likely because the LTE radio is still active , it just cant connect because the APN wont authenticate it. We need a true LTE off switch
I recently flashed to the uclf5 galaxy S3 r4 rom with mohans kernel and I love it. The only problem is the Data connections. The original APN that installed in the flash would connect and had great speeds but would not allow me to send or receive picture messages. Standard text's were ok but no pictures.
I looked around google and the XDA forums and tried a couple of new APN's. I finally got one that would connect and send pictures but it wasn't connecting to 4G LTE only 4G, 1st world problems yes but I wanted the LTE. as I continued searching I managed to get one to connect to LTE and still send pictures and everything was working perfectly, Except now the phone randomly disconnects from all connections with a little circle with a line through it instead of connection bars and obviously no data or phone calls. If I toggle back and forth between APN's I can get it to connect again but it's very intermittent sometimes it'll stay connected for hours other times for just minutes.
I originally had the SKYICS Superlite Rom installed and didn't have any connection issues what so ever and i'm completely at a loss as to what's going on now.
Original APN Settings
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not Set
MMSC: http ://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,mms,supl
APN protocol: IPv4
Allows Picture messaging but no LTE
Name: ATT
Phone
APN: wap.cingular
Proxy: Not Set
Port: Not set
Username: WAP @CINGULARGRPS.COM
Password: (Forgot but it's there)
Server: Not Set
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,mms,supl
APN protocol: IPv4
Allows Picture Messaging and LTE
Name: ATT LTE
APN: phone
Proxy: Not Set
Port: Not set
Username: Not set
Password: Not set
Server: Not Set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,mms,supl
APN protocol: IPv4
I'm not sure how that last one works but it does.
These settings do work, but again pretty much at will. this morning i woke up and was conected to edge. that was scary...
I'm not sure if its my settings or tge radio or something else entirely. any help would be greatly appreciated.
I've been having the same problem. Everything will work for a few seconds then I get a "null cell state delivered" message when I check logcat. Changing APNs didn't work for me but how are you getting to the APN settings? Every time I try I just get a dialog box that tells me to insert a sim card.
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Nexein said:
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Click to expand...
Click to collapse
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Shckr57 said:
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Click to expand...
Click to collapse
AT&T, I've tried resetting to default APNs as well as comparing mine to those in AT&T's Help and other peoples' own settings.
Droid2drummer said:
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Click to expand...
Click to collapse
See I can pick up wifi just fine, it's just my regular data that's acting up. I've tried looking into a guide for flashing radios but to be honest, I don't know much about LTE bands or anything. Is there a good guide here that I missed? It seems as simple as flashing one with CWR but I don't wanna ruin anything.
Write down your apn settings here so we can look at them
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Nexein said:
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Click to expand...
Click to collapse
-3G Settings-
Name: ATT
APN: wap.cingular
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: [email protected]
Password: cingular1
Server: <Leave in Blank>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms
APN Protocol: Leave it to the Default one
-4G Settings-
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Nexein said:
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Click to expand...
Click to collapse
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Shckr57 said:
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Click to expand...
Click to collapse
Added both, tried selecting each one and I'm still having the same problem.
So to update, I've gone back to stock 4.4.4, straight from google, still not working, and then flashed the newest radio and that didn't do it either. Starting to thing it's a hardware problem, maybe actually is the SIM?
Ended up being the sim! Thanks for your help though, guys!