This morning my phone (nexus S) told me it had an update to 4.0.4, which i tapped install. I previously had ICS 4.0 (i think).
When the phone boots up all i get is the flashing colourful spash screen, and it doesn't move on from there.
I tried to get into recovery mode, but all i get is a android man lying down with an exclamation mark over him.
What can i do? what commands for ADB do i need to revert it back to a functional state? I hope its not bricked :-{
Was your phone rooted?
Sent from my GT-I9100 using XDA
rooted
Im not sure what the defination of rooted is but i previously had cyanogen mod on, but reverted back to standard android 2.3 then to the standard android 4, which when installed seem to also remove CWM which i had on.
It is unlocked though
it may work
I will suggest you either you can go to Samsung service center as your phone warranty is not void or nigher you have done anything that is not supported by Samsung or 2nd solution is that download the suitable official ROM from this forum for your phone, and also ODIN, and flash it by going into download mode.
also i will suggest you gain some knowledge how to flash your phone with ODIN before flashing it.
Sounds like you bricked it to me... good luck!!
jackwoz said:
This morning my phone (nexus S) told me it had an update to 4.0.4, which i tapped install. I previously had ICS 4.0 (i think).
When the phone boots up all i get is the flashing colourful spash screen, and it doesn't move on from there.
I tried to get into recovery mode, but all i get is a android man lying down with an exclamation mark over him.
What can i do? what commands for ADB do i need to revert it back to a functional state? I hope its not bricked :-{
Click to expand...
Click to collapse
pull the battery out..and try to enter recovery mod and wipe data/factory resert
Brick or no brick
Hi,
In order to find out if your phone is bricked you need to first remove the battery, replace it and then the do the three key boot to get the phone to boot into download mode.
If that works then you can locate the right firmware and then install via Odin.
If not the next step is to get a jig that forces the phone into download mode (provided it still has bootloaders) and then via Odin again install your firmware.
Otherwise it's a trip to Samsung I think.
Try pulling the battery and wait a few minutes, insert battery and try entering recovery mode again.
Related
This is for the people who got a new captivate through return or purchase or how ever you obtained it. If you tried flashing a new rom and now are stuck at the att boot loop or the battery loop and your phone will not boot up here is help.
1. See if your phone will do the 3 button recovery to get into download mode.
2. If you cant get into download mode you might need a Jig or do the resistor technique to get into download mode.
3. See if this odin (I897UCJF6-final-OCD-REV0.exe) will flash your phone back to the stock 2.1.
4. If after flashing the 2.1 odin and your phone still has boot loop then try the 2.2 stock odin
5. Next do the same as previous but try with this odin (I897UCJI6-OCD-REV02-Low-designgears_1_.exe) which is the 2.2 stock odin.
Note all of these flashes require you to be in download mode and have odin fired up on your pc the plug in your phone so odin can recognize it so
a. be in download mode (not connected to PC)
b. have odin open on pc
c. Plug in phone to pc and start odin.
odin likes to stop flashing when setting pit file so if it freezes give a sec and if nothing try it again.
if odin freezes on the set pit file your phone will have the dreaded phone to pc icon during boot but dont panic set your phone into download mode and try again.
If any questions should arise PM me or leave a comment and others and i will try and help.
Took me two days to fix my phone after flashing to stock to root it but i hope this helps you turn your 400 dollar paper weight back into a phone.
umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.
i ran into this a few days ago while trying to root a friends captivate(1008) purchased from walmart recently. after trying to flash back to stock i was stuck on att boot loop and could not get into download mode via button combo to save my life. tried everthing minus a jig....after getting fed up with it, i sat it aside. to my amazment, after about 10-15 minutes the mf booted up. i had to use adb to reboot into download mode. flashed with odin(from aio toolkit) back to 2.1. everything worked fine, no problems except for one thing...sometimes it will still loop for a few minutes before it boots...sometimes it boots right away. Im still investigating the whole ordeal but my point here is: if you think your phone is stuck on att screen, just let it sit for a while....maybe a long while. and it should boot. then use adb to get back to download mode. i read every forum post on the web about this issue...just found this thread and thought id give ppl a heads up. hope it helps
I'm stuck in a bootloop right now on the Galaxy S animation screen and this wipe cache and data method doesn't seem to work for me.
so i recently tried flashing a darky rom theme onto my captivate running mosaic 8.
it worked the first time. then i tried another theme didnt like it, so flashed the darky rom one, and now, bootloop....
i can get my cappy into download mode, but odin doesn't recognize it.
i cannot get it into recovery mode with holding down the volume up and down and power button.
i need help
--edit--
fixed!
biggest help i have EVER had in custom roms/rooting etc..
http://forum.xda-developers.com/showthread.php?t=1351224
TRusselo said:
umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.
Click to expand...
Click to collapse
ok cmw is not mounting cache or anything else any other ideas
Hey, i am new here i used to get helps lot in this forum but now i am facing a problem that i didn't found a solution for it yet..
first off i tried to change from android 2.3.6 to 2.3.5 (Arabic support) using Odin v1.83 when i put the .tar file into PDA then i run it. gave me failed and the phone won't work again when i restarted it gave me result are like this : Phone--!--PC
please help me i cannot do anything.. i tried to remove the battery using usb cable go to recovery mode,,, download mode but nothing it keep appearing even it i turned off the phone just in one click to power button it appear again.. i am going to crazy and the phone has warranty expired please is there anyway to solve this problem?
I don't know if your phone is the same, but with my Nexus if stuck in bootloop I can plug the usb cable in and use adb to enter command "adb reboot bootloader" and get to fastboot and flash the stock images. Maybe you can try something like that. That's why I love the nexus I thought I bricked it a couple times but I always got back to stock images. or if you have a cwm restore you can get to that once in fastboot.
Thanks for your reply! but where i can find stock images?? and can i make it without formatting everything on it? plus when i did that i wasn't have the sd card inside it and without a sim card also
i found on the web that i need to install default kernel.. i did that and put it to bootloader in Odin and the operation succeed but now i am facing looping on Samsung logo with yellow triangle ... see the picture.. it always loop can't do anything tried recovery mode download mode but nothing.. is there any fast solution please? i beg you guys please
Try to wipe everything trough recovery, and flash another rom.
Just google for Heimdall recovery
Does Heimdall perform anything different than Odin?
try to install leaked original rom ics for gs2. i try it and yellow triangle is out
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Perfect!
This zip file worked perfectly on my Rogers Galaxy Rugby. Many thanks!
Happy to hear
Sent from my GT-S5690R using xda premium
Big problem now though....
So the root went swimmingly, but I got a little too excited removing pre-installed apps. I backed up and removed Samsung Home, and removed and NOT backed up SNS 1.0. The phone will now refuse to boot unless I wipe data/factory reset in recovery mode, but after that it just ends up crashing during the Android wizard start up....
This is a brand new phone, what can I do to restore those apps, and get it back to the way I received it earlier today?!
There is a way to boot into safe mode, head Google mod2extreme and I find the forum for our phones (currently the only one) find advise there
Sent from my GT-S5690R using xda premium
Thanks for the name of that forum! I've found the guide someone posted here: http://www.mod2xtreme.com/showthread.php?t=12386 and I've decided to try it.
I'm using the first firmware listed in this thread: http://www.mod2xtreme.com/showthread.php?t=11744 (S5690XXKL1 2.3.6 2011 December S5690OXFKL1) mostly because under Country/Carrier it has nothing, so I'm assuming it's more generic than the others. I'm also keeping in mind this is for the 5690, not the 5690R, so it may not work at all. But, worth a shot since my only other recourse is to break down and cry in front of a Rogers attendant to see if he can give me a new one. "Root? What's root? Like ginger?"
I'm using v.1.83 of Odin3, which is listed as supported the 5690.
Downloaded KIES 2.0 from http://www.samsung.com/my/support/usefulsoftware/KIES/JSP - It gave me two DLL registration (COM) errors during installation on Windows. Uncertain if this will end up screwing me over or not.
Be right back, rebooting now that KIES is installed... will edit this post when there's more to report.
EDIT: Yeah, so I ended up trying both Odin version 1.83 and 1.85, with the Marvell .pit file, and the firmware from that thread. I learned that I had to put the phone into Download Mode, NOT Recovery Mode while trying Odin. Even still, nothing worked. I've given the phone up to Rogers and they will try to replace the original ROM, hopefully they won't notice that I've rooted it and really mucked everything up. They said if it doesn't work they'll send it off to Samsung to get it repaired. Anyone know if they find out I rooted it, I'd have to pay for voiding a warranty or anything?
i have the same device hae you manage to get clockworkmod recovery on it?
Does this method erase all personal data/downloaded apps from phone?
Great it worked perfectly...
did you success in installing different firmware?
Thanks again
Thanks a lot, worked like a charm.
Is there a way I can install Clockwork Mod? Rom manager doesn't recognise the s5690r. It gives me the option of selecting the Epic4G or the GalaxyS i9000. will either of these work?
Also, once I get that figured out, is there any roms compatible with the s5690r? I've scoured the webs with no luck. Not a very popular phone, eh?
Thanks again.
markdexter said:
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Click to expand...
Click to collapse
Good Day, I am also working on the Bell Canada Version of the Rugby. It is the GT-s5690m model. I am now stuck in a bootloop and don't know how to fix it. I have played around with the root and unroot zip files that have been floating around but I am certain that the bootloop is due to not being able to clear the Delvik Cache. As you are aware Clockworkmod recovery is not supported on our devices. I am unsure how to get it to work. Until then I just keep trying different things to hopefully get this phone up and working. It is quite a rugged device and would be great with a custom rom and recovery. Could you explain to me in layman's terms how I might create a flashable clockwork image to flash via Odin or even through stock recovery. I would love to get this phone up and working. Thanks in advance
Sasktel Rugby
Hi there. I am working on the Sasktel version of this phone as well. I tried to change the model from R to M because this phone is the same as the bell model version but it would not install it. I found it on the external SD card but it will not run the zip file from the 3e recovery. Any ideas why this might be happening?
Thanks,
Hey there, apologies in advance if I have submitted this thread in the wrong section. I really looked as hard as I could before posting.
Well I rooted my phone, got super user on there, then got clockworkmod red, and then attempted to put the ice cream sandwich mod on my phone, thats where everything went sour. Phone would not go past screen that says samsung. I tried a few times to get it to go past that point, and just nothing. I then attempted to use odin to have my phone put back, but now I cannot even get the phone to open up clockworkmod.
To put it very simply. The only thing I have access to now is the download option (holding both volume up and down while inserting the usb cable from the computer) I have searched the internet high and low for something to run through odin to put my phone back to the way it was. I keep coming up with dead links and long dead downloads. I was able to use the gtg ultimate unbrick, but all that managed to accomplish was to have my phone say at&t instead of rogers.
Im still at the screen that says samsung, with no access to a recovery menu at this point. I only have the download option.
Can anyone help me salvage my phone?
edit: I appear to have been able to reput clockworkmod back on the phone with odin. Thats all I have been able to do.
When flashing any ics Rom/port from.gingerbread/red recovery you will need to double flash...I'm seeing a lot of people.with bricks lately and I think the problem is they are not reading enough before flashing ics...
So you have cwm correct? Boot into cwm by holding volume up down and power button. If you have no roms hen go to mounts and storage and mount USB then plug it into the pc and copy over the Rom...if its gingerbread Rom.just one flash...if its ics then flash, you will get stuck on Samsung screen so boot back into cwm...you will either boot into a blue or some distorted rainbowy cwm...just reflash he Rom
If you can't do that...then idk what else to do as I don't know much about rogers phones and what is and isn't compatible with them...but u would suggest qksters heimdal one click back to stock uclb3...its always worked for me...but not sure if it will work with rogers...
Sent from my HTC PH39100 using XDA
Mytheos said:
Hey there, apologies in advance if I have submitted this thread in the wrong section. I really looked as hard as I could before posting.
Well I rooted my phone, got super user on there, then got clockworkmod red, and then attempted to put the ice cream sandwich mod on my phone, thats where everything went sour. Phone would not go past screen that says samsung. I tried a few times to get it to go past that point, and just nothing. I then attempted to use odin to have my phone put back, but now I cannot even get the phone to open up clockworkmod.
To put it very simply. The only thing I have access to now is the download option (holding both volume up and down while inserting the usb cable from the computer) I have searched the internet high and low for something to run through odin to put my phone back to the way it was. I keep coming up with dead links and long dead downloads. I was able to use the gtg ultimate unbrick, but all that managed to accomplish was to have my phone say at&t instead of rogers.
Im still at the screen that says samsung, with no access to a recovery menu at this point. I only have the download option.
Can anyone help me salvage my phone?
edit: I appear to have been able to reput clockworkmod back on the phone with odin. Thats all I have been able to do.
Click to expand...
Click to collapse
If u can get to dl ur fine
Sent from my SAMSUNG-SGH-I717 using xda premium
http://forum.xda-developers.com/showthread.php?t=1331381
Use this link/program from download mode to get to stock 2.3.6.
Wait, if you can get to download mode, you can reflash JScott's option C from here, then get into CWM red, flash the ICS of your choice, reboot into CWM blue (press and hold vol up/vol dn/power 5 seconds when stuck at sammy screen), wipe data/cache/dalvik, reboot and you should have ICS.
I understand that some people will never get "it", but reading the entire post for flashing/modding firmware is a MUST.
My son was trying to unlock his Verizon Galaxy S3 and install Cyanogen Mod (KitKat). I didn't supervise, so I only have what he told me:
https://www.youtube.com/watch?v=AQdSOTdV06Q
I followed this guy's instructions to the T, but I forgot to unlock the bootloader for the phone, which the guy never mentions. He just assumes that you know that you have to have your phone rooted and the bootloader unlocked so you can flash a custom os to the phone's kernel. I flashed the image, and then put it into recovery mode, and it came up with the big yellow triangle with the message "THIS PHONE HAS SOFTWARE ON IT THAT IS NOT AUTHORIZED BY VERIZON WIRELESS!!!" I reset the phone by plugging it into my computer, and then tried to unlock the bootloader with an app and reboot and flash the image again. After i restarted the phone to put it into recovery mode, it wouldn't turn on.
I made an attempt to fix it, using the post on this board: http://forum.xda-developers.com/showthread.php?t=2581166 and got to a point where it would boot off of the microSD. I then tried to get it back to stock, so we could start all over again but wound up back to where it will now boot, but goes directly to the "THIS PHONE HAS SOFTWARE ON IT THAT IS NOT AUTHORIZED..." and I can't seem to get past this point.
Thanks for any help you can provide. He is currently stuck using a Galaxy S that I was able to put Cyanogen Mod on, so it's not as bad as it could have been!
Rob
rallen911 said:
My son was trying to unlock his Verizon Galaxy S3 and install Cyanogen Mod (KitKat). I didn't supervise, so I only have what he told me:
https://www.youtube.com/watch?v=AQdSOTdV06Q
I followed this guy's instructions to the T, but I forgot to unlock the bootloader for the phone, which the guy never mentions. He just assumes that you know that you have to have your phone rooted and the bootloader unlocked so you can flash a custom os to the phone's kernel. I flashed the image, and then put it into recovery mode, and it came up with the big yellow triangle with the message "THIS PHONE HAS SOFTWARE ON IT THAT IS NOT AUTHORIZED BY VERIZON WIRELESS!!!" I reset the phone by plugging it into my computer, and then tried to unlock the bootloader with an app and reboot and flash the image again. After i restarted the phone to put it into recovery mode, it wouldn't turn on.
I made an attempt to fix it, using the post on this board: http://forum.xda-developers.com/showthread.php?t=2581166 and got to a point where it would boot off of the microSD. I then tried to get it back to stock, so we could start all over again but wound up back to where it will now boot, but goes directly to the "THIS PHONE HAS SOFTWARE ON IT THAT IS NOT AUTHORIZED..." and I can't seem to get past this point.
Thanks for any help you can provide. He is currently stuck using a Galaxy S that I was able to put Cyanogen Mod on, so it's not as bad as it could have been!
Rob
Click to expand...
Click to collapse
Go to download mod (volume down + home + power button) then flash stock 4.3 or 4.4.2 via odin the one you was on.
To add to the above reply. If you are on 4.3 or 4.4.2 stock bootloader, you cannot unlock it to install custom recovery and custom ROM. You are limited to safestrap and compatible (same OS version, 4.3 or 4.4.2) touchwiz ROMs only. Do not attempt to use the app to unlock your phone once you are back on stock or you will brick again.