Database Info

[Q] I9000m Can't mount internal sdcard

Hi,
this morning I flashed froyo JPK onto my phone and everything was working great until I downloaded a file through dropbox and suddenly my screen went black. I had to take out the battery to restart the phone and then it got stuck in an endless loop of blinking start up logo.
When trying to get into recovery mode I get the message it can't mound /dev/block/mmcblk0p1. I have tried several things I found here on the forums, including going back to stock UGJH2 but still the same.
Any suggestions on what to do? Do I have to send it in? The problem is I bought this phone through ebay as I am living in Australia so not sure if my local Samsung will be of any help.
Thanks,
b3n

I think I really screwed something. On another forum someone suggested to use the JM5 ROM and so I did. Now I can't even get my phone into download/recovery mode anymore. Any help on this or do I have to get it fixed in a service centre?

I have the same problem.... I'm stumped! My phone goes through the Galaxy logo then goes black with the two buttons lit up. Stuck.
Ugh.

same problem, so far nothing is working
anyone found anything out as of yet?

when my phone was unable to enter download or recovery mode i was forced to make a jig.
it's 301Kohm of resistance soldered to pin 4 and 5 of a micro usb plug that you rip off a cable. works everytime. here i have 2x150Kohm + 1x1Kohm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the red pins are the pins you need to solder to the resistors.
Code:
* * [COLOR="Red"]*[/COLOR]
* [COLOR="red"]*[/COLOR]

Sensation almost 100% bricked.. devs help needed

Hi guys, i got almost dead phone in mine hands and I really want to try to give it a new life.
I dont know all what was done to it before, but it was soft bricked, then few people tried to recover and bricked it even more, then in SC it was disassembled with no success, and now i have it.
What is working:
1. i can get here -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. theres no recovery on phone, no at all, also all partitions are clean and broken, but i can boot cwm with "fastboot boot" command
3. from cwm i can get to root shell in busybox with "adb shell"
4. fdisk on /deb/block/mmcblk0 fails and nowhting happens
5. in recovery any action with internal memory fails with error that can't mount /deb/block/mmcblk0p** (** are numbers for different partitions)
6. flashing from bootloader with PG58IMG.zip hangs on writing and nothing happens
all internal partitions are broken somehow, they fail to mount, and can't be written on, is there ANYTHING that can be done?
Please help me guys

Anyway its bricked so try to flash 1.17 bootloader you r already S-off then try to unlock bootloader via htcdev. Then flash gingerbread RUU if it start working there is nothing wrong to try you won't loose anything because its already bricked.
Sent from my HTC Sensation using xda premium

Just flash a 3.32 ics ruu
Sent from my HTC Sensation using XDA

[Q] ATT HTC One X stuck in TWRP and Bootloader

Good afternoon guys, sorry if i have a bad english i will try to do my best
i need help with my htc one x from at&t, i get it last friday and root it, then i unlocked the bootloader but when i try to install a custom rom(Clean ROM) something went wrong, i tried to restore my back up copy but accidentally wiped it while triying to wipe de other stuff.
Now im stuck in the TWRP recovery and the bootloader, PC doesn't detect the device as a usb storage, i also tried to flash another rom using adb push and adb sideload, maybe i made a mistake or something, i hope you can help me.
Also i want to know wich are the correct drivers for Windows to detect properly the phone as a mount usb on TWRP.
Thanks

What happens when you mount usb storage through the TWRP menu?
Sent from my Evita

Nothing shows up on my computer or any of the others I've tried it with today. And I've swapped over USB cables to make sure it wasn't that.
I'm assuming it's either some deep low level issue with USB connectivity or a hardware problem on my phone like a bent pin.

TKTAB911 said:
Nothing shows up on my computer or any of the others I've tried it with today. And I've swapped over USB cables to make sure it wasn't that.
I'm assuming it's either some deep low level issue with USB connectivity or a hardware problem on my phone like a bent pin.
Click to expand...
Click to collapse
Never mind, I modded it and this is no longer a concern;​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q] Very bad brick? Help needed

i have HTC Sensation XE and ofcourse tried to unlock it at start with this tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone is now ***unlocked*** but the problem is that i cant get into recovery again, also phone stuck at bootscreen (beats logo).
Phone was updated before to the latest software ( ICS 4.0.3 ).
Any idea how to solve this?
EDIT:
Phone after some time (and battery of the phone) is able to go into bootmode...
Now i know that i have s-off and unlock also
Anyway i got some problem with 4ext recovery to flash (phone isnt rooted yet) but i got some solution with PG58IMG.zip, but now got kinda hardware problem with turning on phone again.. (need wait again some time - like cooldown)
Now question: its possible that is hardware damage?
Battery is brand new, cuz i thinked that was the problem.

news:
about phone:
phone is fully unlocked and with s-off also with superCID. Hboot 1.29
Zip adding recovery was successful.
After that i tried to install Viper5, fully wiped phone, soft was installed and last thing was restart phone.
Now bad things: phone stuck at htc logo, also im unable to get 4ext recovery again ;/
Any ideas how to solve this?
Maybe i should flash all with PC tool?

try to flash the boot.img of the rom via fastboot command
fastbot flash boot boot.img

Help with restoring Droid Ultra!

Hello my XDA Developers I hope that you can help me with my phone, last week I bought a Droid Ultra fromo Ebay, and I received the phone but I think that it was a demo phone with a demo software from the store because the phone can not charge more than the 40%, and the app "VZW Demo"" is opened again and again doesnt matter how much I uninstall the app, I restore the phone from settings and doesnt work, I been tried to root the phone for flashing a ROOM but I cant, I been tried to return to stock the phone form this post http://forum.xda-developers.com/showthread.php?t=2580060 but im having troubles with the ADB and rebooting to the bootloader, seems like my pc doesnt recognize the phone (see images), and yes I have the USB debug enable, but with other phones my pc can recognize, the only way that my computer can recognize the droid ultra its from de recovery but from there I can not reboot to the bootloader, I downloaded the properly drivers and still nothing, I hope you guys cand help me, you are my last chance, sorry for my english its not the best im not from this country
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.

teerout said:
will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.
Click to expand...
Click to collapse
I will try and I will say you if that works for me!