I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.
Thank you sir. Greatly appreciated
flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.
Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?
this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.
Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...
Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz
Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!
angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?
hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
Hi guys,
My newly bought HTC Snap is now stuck at the first screen which says "smart mobility" after trying to flash the 3evo rom while thinking that my phone has been HardSPL-ed. Shoudl've known the check if the HardSPL Flashing went correctly :\ and made the mistake of trying to flash the rom with only jumpSPL and seeing if it would work, thinking i had the original rom to fall back on if it failed..
anyway so i got hold of the original rom its been shipped with and flashed it without any problems, but the phone still wouldnt go past the smart mobility page. i am however able to access the bootloader..
So what else can i do to get out of this mess
have you tryed ahttp://mobiletechvideos.com jig from ebay .if that does not work try mobiletechvideos on ebay
I have the new inspire 4G. I recently rooted it with Bubbys one click. Obviously a great program to use or I can promise you that I wouldnt be up and running!! The problem I am having is that I want to load a new ROM. Looking at the core droid ROMS. I have downloaded the one I want and gone into my ROM manager to load it from SD card. Its on my SD card and I select it. Once it does the data wipe and backup it says its gonna reboot into CWM....the problem is that it never does. The HTC logo screen comes up and then fades to black. I have to take the battery out and put it back in to actually get the phone to turn off and back on. Once it turns back on it goes back to the same ROM ive been using that came with Bubbys once click. What the heck am I doing wrong??
I am totally new to this and have been reading everything I can get my hands on....but I need professional help....in more than one way Im sure!! Any help would be appreciated. I already checked the answer and questions page in Bubbys section. I didnt see an answer.
Patrick
My CWM is version 3.0.0.6
PBCRUM1970 said:
I have the new inspire 4G. I recently rooted it with Bubbys one click. Obviously a great program to use or I can promise you that I wouldnt be up and running!! The problem I am having is that I want to load a new ROM. Looking at the core droid ROMS. I have downloaded the one I want and gone into my ROM manager to load it from SD card. Its on my SD card and I select it. Once it does the data wipe and backup it says its gonna reboot into CWM....the problem is that it never does. The HTC logo screen comes up and then fades to black. I have to take the battery out and put it back in to actually get the phone to turn off and back on. Once it turns back on it goes back to the same ROM ive been using that came with Bubbys once click. What the heck am I doing wrong??
I am totally new to this and have been reading everything I can get my hands on....but I need professional help....in more than one way Im sure!! Any help would be appreciated. I already checked the answer and questions page in Bubbys section. I didnt see an answer.
Patrick
My CWM is version 3.0.0.6
Click to expand...
Click to collapse
Please go here.
The dev has a faq posted that explains this as well, and a quick search through the general section would show around 20 threads talking about this issue.
I am returning my Vivid to At&t I told them that I got the phone from them with the bootloader saying relocked.Can they tell what I have done to my phone once they have it back in their hands.I unlocked it with Hansoon2000 all in one then used WCX Illuminati recovery. A few days later the screen wasn't reacting to touch the top right of the screen so I decided to go back to stock and warranty it.In a Noob move I tried in vain to get the bootloader to say locked by downloading ICS from HTC's website and reinstalling stock after locking the bootloader. This is the first time I have attempted rooting and probably the last.Sorry if I dont make clear sense I will be glad to clarify if asked.Any help I get is so very much appreciated.
I have searched and searched and have not been able to find exactly what I am looking for.
I have an HTC One S on the Rogers network in Canada. It was originally a Fido phone but worked fine on Rogers without unlocking or rooting...?
I rooted it and installed CWM and it was working great.
I decided to try to flash the jellybean rom and thats when things went screwy.
I pushed some things in recovery and as embarrassing as it is I cant tell you exactly what I pushed but I can no longer get to the CWM recovery. I am stuck in the white bootloader screen.
It now says tampered relocked security warning.
Heres the thing. I have tried everything I have found online and nothing.
I think I should be trying to flash the stock ROM but I cant find one that is for a One S on the rogers network.
I have downloaded everything from the drivers, SDK, ROM's, hasoons all in one...adb, and so on and so on.
If anyone can help get this thing working I will paypal you some cash!
Thanks in advance!
Tom
are you sure you have the s4 version and not the s3? that could be your issue. what does the model number on the box say?
how do i know what model it is?
on the box it says Z520m, Android with HTC Sense
that's the s4. you could try to flash the tmous stock ruu, but idk if your going to find the exact rom you're looking for. i used this rom http://forum.xda-developers.com/showthread.php?t=1648526&highlight=stock+duo when i first started flashing because it is completely stock, just optimized for better battery life and faster processes