Database Info

Bliss 3.5 port for mytouch 4g

so i just created a Bliss Sense 3.5 port for the Mytouch 4g not sure how well it will work and all but if anyone wants to test it out and let me know feel free
gotta post 2 more times

lol
one more time

ha ha now i can post
http://www.megaupload.com/?d=FN6D6QTL is the linke to the port to mytouch 4g with sense 3.5

I downloaded this zip and it download in a second. I knew it couldn't be right so before flashing I extracted the zip and there's nothing inside.
Sent from my HTC Glacier using xda premium

I'm currently downloading and it seems to b the full 369mb
Sent from my HTC Glacier using xda premium

1) the file size is 359.34MB, so it could very well be real.
2) OP should have posted this in the correct place.
3) can anyone verify if this is safe? i'm a bit wary of flashing...

Can u start a new thread in the android development section.I would like everyone to c it n give ya feed back.I very rarley look through this section so based on that I wonder if it wont get as many views and dl as it would in the development section...
Sent from my HTC Glacier using xda premium

Doesn't boot. Stays on the Tmobile Mytouch 4g screen

WOW
lol now i never said i was a dev... i am new at this still i have made some for my g2 but never did the mytouch4g now i dont know if it will work for you all...
i can't open it in dev section dont have enough posts... go figure..
if it won't go past the screen did u do a full wipe ? please leave all details you can i would like to be first to make one for this phone but i am still learning as well... anyone that wants to help feel free to pm me

I will try this out and report back....
sent from bigdaddy using xda premium....

Ok well I tried it...when installing it gets just past the three quarter install mark then automatically reboots the phone...that's y u can't get past the beginig screen it never finishes install.hope u can fix this.....
sent from bigdaddy using xda premium....

Anything dev ?
sent from bigdaddy using xda premium....

Has anyone tried on this ROM. I couldn't see any findings. Please let me know if you face any issues on using this ROM. This would greatly help

premkkumaar said:
Has anyone tried on this ROM. I couldn't see any findings. Please let me know if you face any issues on using this ROM. This would greatly help
Click to expand...
Click to collapse
Just read 2 posts above u...I've tried it along with other person
sent from bigdaddy using xda premium....

There is already a port in the dev section but it has no working wifi also one on rootzwiki
Sent from my HTC Glacier using Tapatalk

If you need Sense 3.5 Rom, then try BeatMod BlissSense v1.6
Don't look here & there, go for the one which we can trust. Refer this post.
http://forum.xda-developers.com/showthread.php?t=1255881

[RUU][DEVS ONLY][For Porting] HTC Pico [Sense 3.5][Android 2.3.5][Sense Zero]

Found this while searching around google. It's a leaked RUU for the HTC Pico "explorer" which is a light version of Sense 3.5 on android 2.3.5 or most commonly known as "sense zero". I thought I would post it up so that you'll can start porting over to the hero.
The Pico specs are rather similar to our phone so it shouldn't be to difficult for someone to port it over, it's also mdpi so no resizing will be necessary.
If you are already considering taking on this project then more than likely you already know how to setup a flashable rom from a ruu but in case you need some refreshing the following will help:
Instructions:
- dsixda kitchen will need to be installed prior to starting.
1. Run RUU and leave open
2. Type %TEMP% in your computers start menu search bar.
3. Search through the folders in there with the long names with numbers and letters, you'll find a zip file named "rom.zip" in there.
4. Place the rom.zip in the original_update folder located in the "kitchen" directory
5. From there follow the steps on the kitchen menu to setup the rom.
6. Then proceed to porting to the hero. :]
- Download Pico RUU
Credits to capychimp for posting the leak up.

I'll check it out
私のEVO 3Dから送信される

Thanx bro ill start on it .hope this IS better than what I have been doin
Sent from my ADR6400L using XDA Premium App

Good luck fellas, wish I could help out. :[
Hopefully ill be able to borrow a hero from work to help with this.
Sent from my PC36100 using Tapatalk

All Smiles

i feel quite thankful cause u guys still workin on the hero. u guys are awesome i hope i get the same phone as u guys haha and follow more of your works

Thanks for posting this should save a ton of headaches lol. Rom.zip has been pulled and is being worked on
Sent from my ADR6300 using XDA App

CondemnedSoul said:
Thanks for posting this should save a ton of headaches lol. Rom.zip has been pulled and is being worked on
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
dl now bro,, we will get it done lol hopefully

tazzpatriot said:
dl now bro,, we will get it done lol hopefully
Click to expand...
Click to collapse
Hopefully? Since when is hopeful an option bro?
Sent from my ADR6300 using XDA App

this is great to see I cant wait to flash this.....
Sent from my HERO200 using XDA App

May pick this up.
Sent from my GT-P7510 using Tapatalk

Also, just a heads up, this thing may be running a new kernel, so it might not boot on first port with any of the kernels currently available to us. Someone good with kernels should be able to help out if this is the case?

Good looking out Flash. I'm actually going to try this ( which is laughable) .this phone just goes to show that the HTC hero is still perfectly capable of keeping up with android even with sense UI. Thanks to the devs and good luck to all.

I have a old heroc that I would send someone for dev help
Sent from my HERO200 using xda premium

griffincash said:
I have a old heroc that I would send someone for dev help
Sent from my HERO200 using xda premium
Click to expand...
Click to collapse
Send it too Flashing He Needs One !!

If he can pm me his address ill mail it out Monday morning.
Sent from my HERO200 using xda premium

I'm actually in the process of getting one off of my employer, they lend out old refurbished phones they have in storage in case our personal phones need replacing or what not. I already submitted a report claiming my phone is having some problems, so hopefully by Tuesday I should have a hero again for a bit.
Most people go for some of the newer phones they have in stock but I asked for a hero specifically lol. They're really cool about trying to get you the phone you ask for and since no one asks for heros anymore I'm pretty sure they'll loan me one. =]
Thanks for the offer though griffin, if for some reason I don't get the phone I'll let you know to see if we can work something out.

Continuous boot loops currently. Doesn't even get far enough for a logcat
私のEVO 3Dから送信される

dastin1015 said:
Continuous boot loops currently. Doesn't even get far enough for a logcat
私のEVO 3Dから送信される
Click to expand...
Click to collapse
Have you checked the log of the flash process? Maybe there's something going wrong with the installation.
Do the following:
1. Flash rom
2. Right after the rom flashes start up an adb shell
3. followed by: cat /tmp/recovery.log > /sdcard/recovery.log
This will copy the recovery log to your sdcard. Check it to see if there's anything wrong with the installation. If everything looks correct then more than likely it's the kernel. I unfortunately have no experience with kernels, maybe jaybob will see this and help out?

I knew it'd be soon.....
self proclaimed XDA resident prick

[REQ] Kingwolf Kernel

Sorry if this is a dumb question.
I recently saw that in proxusers runnymede 1.5 version, he has kingwolfs kernel itn it.
Is there anyway we can get it extracted and flash it separately to roms we desire?
Sent from my HTC Desire S using xda premium

Funny asked the same, but never got any response....
Swyped from my Desire S using XDA Premium

I think that you can use adb to pull the Kernel (boot.img) from a phone with this kernel installed (not sure but I saw a guide somwhere in Google).
The other way (I just did it to extract the kernel on my phone via the Terminal Emulator):
open the terminal on your phone
type
Code:
cat /dev/block/mmcblk0p22 > /sdcard/boot.img
[*] actually I cannot verify this but the extracted boot.img can be flashed via adb or fastboot and then see the version in the Setings of the phone :)
[/list]

Here you go
http://forum.xda-developers.com/showpost.php?p=17648814&postcount=205
Sent from my HTC Desire S using xda premium

Thank you proxuser! Unfortunately it doesnt work on VoidU.., I GT stuck on a bootloop and had to pull the battery, and do a Nandroid restore... Thanks anyway!
Do you have any idea how to fix the front cam? In one of your roms, you tweaked the unity4 kernel to fix it!
Sent from my HTC Desire S using xda premium

proxuser said:
Here you go
http://forum.xda-developers.com/showpost.php?p=17648814&postcount=205
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Thanks for that...

olyloh6696 said:
Thank you proxuser! Unfortunately it doesnt work on VoidU.., I GT stuck on a bootloop and had to pull the battery, and do a Nandroid restore... Thanks anyway!
Do you have any idea how to fix the front cam? In one of your roms, you tweaked the unity4 kernel to fix it!
Click to expand...
Click to collapse
Can I suggest editing post #1 and writing a VoidU user WARNING! so that no one else ends up in that position!

ben_pyett said:
Can I suggest editing post #1 and writing a VoidU user WARNING! so that no one else ends up in that position!
Click to expand...
Click to collapse
Yeah... It may affect other ROMs too, not too sure :/
Sent from my HTC Desire S using xda premium

Mozilla Boot 2 Gecko(B2G)

I'm looking to start a porting team for Mozilla Boot 2 Gecko, is anyone interested in joining?
Sent from my HTC Sensation 4G using xda app-developers app

No one's interested?

i want to be tester, i can help a bit :laugh:

hacklana said:
i want to be tester, i can help a bit :laugh:
Click to expand...
Click to collapse
Alright. I might have it ready tomorrow.
Sent from my HTC Sensation 4G using xda app-developers app

Firefox OS ? Seems to be wonderful for our sensation.

will definitely test it bro
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

I'll test for sure
Sent from my HTC Sensation 4G using xda premium

Does anyone know how to help me on this one? When I set up the device configuration tree, it says "No matches for product spec "full_pyramid" Stop."

Hitorijanae said:
Does anyone know how to help me on this one? When I set up the device configuration tree, it says "No matches for product spec "full_pyramid" Stop."
Click to expand...
Click to collapse
it is probably is giving you that message because you need to add product_specs for the pyramid.If you can give me a link to what setup guide you are using i might be able to help you but I have may not have enough free storage to help fully.

https://developer.mozilla.org/en-US/docs/Mozilla/Boot_to_Gecko/Porting
This is the documentation that I used to set up the system.

And in what step you are now? Do you compile kernel?

I couldn't find the init.rc in etc folder of cm9, so I couldn't build the kernel.

Hitorijanae said:
I couldn't find the init.rc in etc folder of cm9, so I couldn't build the kernel.
Click to expand...
Click to collapse
You will have to decompile a kernel to get the init.rc file. I use dixda's Android Kitchen to do this.

I rebuilt the kernel from cm9 kernel's init.rc, but I still get the error.

Hitorijanae said:
I rebuilt the kernel from cm9 kernel's init.rc, but I still get the error.
Click to expand...
Click to collapse
I got all the tools and stuff installed and went through all the other stuff in the Porting guide you posted a link to. But when I run the command, ANDROIDFS_DIR=my_device_backup ./config.sh <device_id> default.xml" I got the following error.
Code:
Get tmp_manifest_repo
error: revision master in manifests not found
Repo sync failed
It is 7:07 in the morning and I have not been to sleep yet so I am going to go to bed and try to figure out what the issue is with the manifest this evening.

Ok the problem is I do not have a tmp_manifest_repo folder in G2B so now I got to figure out Wu I do not have one. Do you have this folder in your build folder?
Also if you need me to I can give you detailed instructions on what I did about the init.rc file.

T-Macgnolia said:
Ok the problem is I do not have a tmp_manifest_repo folder in G2B so now I got to figure out Wu I do not have one. Do you have this folder in your build folder?
Also if you need me to I can give you detailed instructions on what I did about the init.rc file.
Click to expand...
Click to collapse
Usually, that folder is automatically generated, and default.xml is placed in there.
Sent from my HTC Sensation 4G using xda app-developers app

Hitorijanae said:
Usually, that folder is automatically generated, and default.xml is placed in there.
Sent from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
Yeah that is what I said when I understood hat the error was. The first thing is suppose to do is generate tmp_manifest_repo Folder and its contents. Maybe it was just a fluke and it will correct itself when I try again in a little bit. I only tried it once this morning and I was to tired to try again after setting up long enough to find the cause of the issue.

Has it built yet?
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app

tonight i'll try to build )

[WIP][PORT] Blade v4.6.0 - Android 4.1.1, Sense 4+

Blade v4.6.0​
This is a ROM port from the HTC EVO One X by theDroidfanatic. You can see the original thread HERE.
As of today, 1-31-2013, this is NOT flashable!!! The updater script is still set up for the One X.
The reason I'm releasing this is because my Shift is down until my new flex cable comes in and I can't test anything so I'm asking for help. So far I've been through the majority of the ROM and I feel confident I've made a good start.
The ROMs I've used for parts are JellyBelly v6: Ultimate Edition and StockMod. I've also referenced Legendary-Infamous, MikRunny, and newRUNNY to see how they're put together as well.
I started by modifying Strapped365's JB Kernel in JellyBelly using this [GUIDE] How to port sense to non-HTC devices. Then using various other guides here on XDA, I've been modifying the port ROM to work on our device. I can put together a change log later after work. Now where I am at with this at the moment is the updater script. I've been through the rest of the ROM and think I have a good start but I haven't done anything in the META-INF folder. I am still reading up on how to write my own updater script but I'm not capable yet so those who want to help, this is my immediate need. In the past I was able to get a sense 4.0 One V port to boot on the Shift using an AOSP updater script but I think it may be necessary to write a new one so this will load right. I am a little unsure about the build.prop edits I've made going from GSM to CDMA so that needs to be double checked.
Any and all help is appreciated!
Thank you very much theDroidfanatic for your incredible work and permission to release this.

Change log
2/01/2013:
There is still A LOT of work to be done for this to boot.
Using JellyBelly v6 Ultimate, Changed the kernel using THIS and THIS.
I moved several apks from system/app to data/app to get the system folder down to 423MB
Changed the bootanimation
Changed the system lib modules by adding, overwriting files from base
Changed the system/lib/hw by adding, overwriting files from base
Replaced system/usr/keychars and system/usr/keylayout with system/usr/keychars and system/usr/keylayout from base
Went into system/etc and replaced vold.fstab, /wifi and /ppp with the ones from base
I'm not sure what to do with the Framework folder yet so I left it alone
Edited the build.prop

Also Reserved...

good luck with this, itd be great to see a functioning sense 4+ rom

Sweetness. I'd like to be a tester when you fix the update script.
Sent from my Nexus 10 using xda app-developers app

Ill download and change the updater script. Really all that need changed are the mmcblk0pXX mountpoints. But that's not going to promise anything lol
Sent from my myTouch_4G_Slide using Tapatalk 2

Thanks Strapped. I really appreciate it!

Dude, it would be absolutely awesome to see a sense 4 rom on the shift. Props for putting all the time and effort into this, your shift will be in my prayers.
Sent from my PG06100

Chad The Pathfinder said:
Thanks Strapped. I really appreciate it!
Click to expand...
Click to collapse
Yeah went from a status 7 got 5 args expected 3 to status 6 and that was just trying some simple changes. Ill compare some others a post a good META-inf when I get a sec
Sent from my myTouch_4G_Slide using Tapatalk 2

Drops jaw to ground.. You you you.. You are a master at porting!!
Sent from my VS920 4G using xda premium

megaghostgamer said:
Drops jaw to ground.. You you you.. You are a master at porting!!
Sent from my VS920 4G using xda premium
Click to expand...
Click to collapse
I know right Not to mention the kernel work :laugh:
Makes me really wish I could double-thank posts!!
Sent from my PG06100

Good Luck with this mate Hope you people will enjoy my ROM here as many do on the HOX forums
Cheers

megaghostgamer said:
Drops jaw to ground.. You you you.. You are a master at porting!!
Sent from my VS920 4G using xda premium
Click to expand...
Click to collapse
It's not booting quite yet

bilgerryan said:
It's not booting quite yet
Click to expand...
Click to collapse
That's mostly cause of the updater script right?
Sent from my VS920 4G using xda premium

bilgerryan said:
It's not booting quite yet
Click to expand...
Click to collapse
You guys are making me a little nervous. Keep in mind it may not work even when the updater script is fixed... others more experienced than I have tried to do this unsuccessfully.

Chad The Pathfinder said:
You guys are making me a little nervous. Keep in mind it may not work even when the updater script is fixed... others more experienced than I have tried to do this unsuccessfully.
Click to expand...
Click to collapse
Yes but there is always lady luck waiting to blow on your dice before you gamble
stare into oblivion
Fall into sleep

Chad The Pathfinder said:
You guys are making me a little nervous. Keep in mind it may not work even when the updater script is fixed... others more experienced than I have tried to do this unsuccessfully.
Click to expand...
Click to collapse
Nervous? Nah if they don't read the OP its their fault. Also no matter how effed the updater-script is it shouldn't flash for anyone because of the update binary
Sent from my myTouch_4G_Slide using Tapatalk 2

strapped365 said:
Nervous? Nah if they don't read the OP its their fault. Also no matter how effed the updater-script is it shouldn't flash for anyone because of the update binary
Sent from my myTouch_4G_Slide using Tapatalk 2
Click to expand...
Click to collapse
Oh too good.
Dont worry though Chad, the people who know what strapped is talking about are gonna be the only ones [trying to] flash it anyway :good:
Sent from my PG06100

CNexus said:
Oh too good.
Dont worry though Chad, the people who know what strapped is talking about are gonna be the only ones [trying to] flash it anyway :good:
Sent from my PG06100
Click to expand...
Click to collapse
Agreed I haven't flashed cause ive read it.. I might take a look inside later.. still gotta fix my Roms. So busy
Sent from my VS920 4G using xda premium

Ok I've been trying to figure out how to move forward with this and all I can figure is to start fresh using my ego 4g. Fortunately, JellyBelly Ultimate is on the evo already. Thanks bilgeryan. If I can get it to work that way, surely we can port it to the shift. If any one wants to digin and do whatever your creativity leads you to do then by all means do it. I'd like this to be a community effort as much as possible. Especially "sense" I'm not a dev. There's A LOT I don't know.