[Q] Dumb question - Samsung Infuse 4G

Just got the updated version of cm7 on. Go to cwm and it says I need the updated version of manager to get gapps and also any other information.

BCRsherwood said:
Just got the updated version of cm7 on. Go to cwm and it says I need the updated version of manager to get gapps and also any other information.
Click to expand...
Click to collapse
Try flashing GAPPS
http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
If not, re-flash CM7 but follow the instructions carefully.

porksoda02 said:
Try flashing GAPPS
http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
If not, re-flash CM7 but follow the instructions carefully.
Click to expand...
Click to collapse
I thought that I had the gapps on my sd, but it never showed lol. Thanks again for the link. Made getting it finished alot easier. Now running perferct!

Related

Everything Updated in one Place with CM 6.2 and CWM recovery

Okay so I went and got the latest working updates from everything and put it in a convenient package for you.
One Click Root Apk: Version 0.1.0
Radio: 2.42.02.10.29
HBoot: 1.47.0000
Kernel: 2.6.29.6 (up to 768 Mhz and its stable )
ClockworkMod Recovery: 3.0.0.5
CynanogenMod: 6.2 - No longer needed
S-OFF
Step by Step Instructions below.
The instructions are only for people running CynanogenMod and ClockworkMod recovery.
Unzip everything.zip to your sdcard
Also put Kernel.zip on your sdcard
You HAVE to install these in a specific order otherwise some things won't work.
Flash CynanogenMod 6.2 if you havent already. It has the latest kernel in it already which goes up to 768 Mhz. http://forum.xda-developers.com/showthread.php?t=731659 here's the new link
Install Rom Manager and flash ClockworkMod recovery 2.5.0.1. Now you MUST backup with it.
Run the ruu included in the zip. this will give you the latest HBoot.
Boot into hboot mode (volume down and power button) and look to make sure it installed HBoot 1.4.7.0000
reboot
install heroroot010.apk
run heroroot.apk and it will give you darchstar's recovery and put a file on your sdcard called rootme.zip
reboot
reboot into Darchstar's recovery
flash rootme.zip
reboot
you now should have root and should have the super user app. if you dont then something went wrong and you should try again.
if you have root, download rom manager and flash ClockworkMod 2.5.0.1
restore your backup with ClockworkMod recovery
reboot
reboot to recovery
flash radio.zip
it will tell you to reboot after it is done.
this boot will take a while so be patient
reboot again
reboot into recovery
wipe dalvik
flash kernel.zip
reboot
reboot recovery
warning: there is no hboot s-on for the cdma hero YET. they are working on it though.
flash S_OFF.zip
reboot
you now have hboot s-off
reboot into recovery
plug phone into computer
run the following code in adb:
adb shell
mount sdcard
flash_image recovery /sdcard/CWMR3.0.0.5.img
exit
adb reboot recovery
reboot
done!
Update: Heres the link to Everything.zip and Kernel.zip: http://www.mediafire.com/?tj5a734t7n6gi
Thanks to jcase for the root apk
Thanks to theimpaler747 for the new radio
Thanks to Whosdaman for the ruu with the new hboot in it
Thanks to Decad3nce the updated kernel
Thanks to regaw_leinad for the S-Off
Thanks to aosp and ClockworkMod for the recovery
Thanks for all the info Deke -- is there some sort of package that is included with this? I don't see anything...
AboveUnrefined said:
Thanks for all the info Deke -- is there some sort of package that is included with this? I don't see anything...
Click to expand...
Click to collapse
yeah sorry. im having troubles uploading it. it will be on here as soon as posible
Edit: Everything.zip is now uploaded! enjoy!
CynanogenMod: 6.2 ?
When did this happen ?
PTown599 said:
CynanogenMod: 6.2 ?
When did this happen ?
Click to expand...
Click to collapse
bout a week ago
6.2 has been around since mid to late December... if not earlier.
P.S. You may wish to give people credit where credit is due.
You're a hero with a hero -- saved me boat loads of time!
I don't see anything named cyanogenmod 6.2 in the zip or the provided link...
Squiggy45 said:
I don't see anything named cyanogenmod 6.2 in the zip or the provided link...
Click to expand...
Click to collapse
Isn't there a lot of places that can be found?
A lot of places? I have 't found one. The contents of everything.zip is:
CWMR3.0.0.5.img
heroroot010.apk
Radio.zip
RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe
S_OFF.zip
No cyanogenmod...
Squiggy45 said:
A lot of places? I have 't found one. The contents of everything.zip is:
CWMR3.0.0.5.img
heroroot010.apk
Radio.zip
RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe
S_OFF.zip
No cyanogenmod...
Click to expand...
Click to collapse
Here's at least one CM 6.2 build
http://forum.xda-developers.com/showthread.php?t=731659
You really need to credit the people who made this stuff in your op unless you want to get infracted or banned. Also this is a pointless thread as these things can be easily found by searching. And you haven't developed anything here so this should be in another forum, not development. Seems like you just keep making threads in development of other peoples work for no reason. Way to go.
sent from my hero, which no longer sucks ass
Squiggy45 said:
A lot of places? I have 't found one. The contents of everything.zip is:
CWMR3.0.0.5.img
heroroot010.apk
Radio.zip
RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe
S_OFF.zip
No cyanogenmod...
Click to expand...
Click to collapse
i didnt put it in everything.zip cuz i didnt have time. I put the wrong link.. sorry. i just updated the link so try it now.
il Duce said:
You really need to credit the people who made this stuff in your op unless you want to get infracted or banned. Also this is a pointless thread as these things can be easily found by searching. And you haven't developed anything here so this should be in another forum, not development. Seems like you just keep making threads in development of other peoples work for no reason. Way to go.
sent from my hero, which no longer sucks ass
Click to expand...
Click to collapse
Im putting on the credits now and this is just a package that has everything in it so people DONT have to search for it so it saves them a lot of time plus it has step by step instructions 4 people who dont know how.. and there is no where else to put it otherwise i would.
Q & A would be a tad more appropriate since nothing is being developed here.
kk. will do next time. and if u guys want anymore of these packages pm me da details. itll be in q and a from now on
Since when is there a CM 6.2? The last stable release is 6.1. Anything else is unstably/nightly/unofficial
http://forum.cyanogenmod.com/files/category/17-htc-hero-cdma/
its been out for a while dude. just look at the link i posted. completely stable. idk why they havnt updated they're site yet. http://forum.xda-developers.com/showthread.php?t=731659
That's not 6.2, that's some custom build. Don't know why it's called 6.2, as there never was a 6.2, they went straight into 7
EGOvoruhk said:
That's not 6.2, that's some custom build. Don't know why it's called 6.2, as there never was a 6.2, they went straight into 7
Click to expand...
Click to collapse
Some phones did get pushed to 6.2, the jaybob build was synced with basically the last of the 6.x Hero source.

CWR - ROM Manager - CM9

I root my phone, installed CWR v5, and then flashed CM v9 3.4. I have the premium Rom Manager but when I open it it says that I need install CWR. Should I have Rom Manager install CWR again? Is that safe?
..
I can confirm that. I used a modded CWM first which wasn't recognized by ROM Manager, so I let it flash again. But I found it a bit anoying that I had to reflash as someone might want to stick with the modded version. But in the end it doesn't really matter, I guess.
supermaz said:
I can confirm that. I used a modded CWM first which wasn't recognized by ROM Manager, so I let it flash again. But I found it a bit anoying that I had to reflash as someone might want to stick with the modded version. But in the end it doesn't really matter, I guess.
Click to expand...
Click to collapse
You can stick with your modded version. In RM just hit Menu and choose Manual Flash Override.
Thanks jesusice, I didn't know that!
Override
Override worked. Thanks!
supermaz said:
Thanks jesusice, I didn't know that!
Click to expand...
Click to collapse
No problem, I didn't know for the longest time either. Each one teach one, right?
I have a rooted sgs2 running from manager 5.0.0.6 how can I download cm9 it doesn't give me the option in download section
k.JENNINGS1 said:
I have a rooted sgs2 running from manager 5.0.0.6 how can I download cm9 it doesn't give me the option in download section
Click to expand...
Click to collapse
Check the development section of your phone's forum.

Flashing problems

OK guys let me tell you about my issue's
I'm using TWRP 2.7.1.0 (Tried 2.7.0.2 no difference) S-off, Unlocked, latest firmware from Santods files. The phone works fine with Sense ROMS but for the life of me I can't flash a GPE ROM. They fail every time. Santod tried to help me out the best he could by having me replace the Boot.img from the ROM I was flashing thinking that I was on a secure Boot image (And I may be but I replaced it and they still won't flash). Mr. Jaydee82 also modified a ROM for me to try out (although I'm not sure exactly what he did to it) and it wouldn't Flash properly either. When I try to flash these ROMs it will appear to flash properly and then they will go to the bootscreen and just sit there and churn. Depending on the ROM some will time out and power down the device and some will just sit there forever until I do a virtual battery pull. I'm freaking desperate to find out what is going on with this device and I don't feel right bugging Santod so I decided to post this in hope of more ideas about what could possibly be going on with my device. Any and all help greatly appreciated!!!
Thanks!
Duckman_UF said:
OK guys let me tell you about my issue's
I'm using TWRP 2.7.1.0 (Tried 2.7.0.2 no difference) S-off, Unlocked, latest firmware from Santods files. The phone works fine with Sense ROMS but for the life of me I can't flash a GPE ROM. They fail every time. Santod tried to help me out the best he could by having me replace the Boot.img from the ROM I was flashing thinking that I was on a secure Boot image (And I may be but I replaced it and they still won't flash). Mr. Jaydee82 also modified a ROM for me to try out (although I'm not sure exactly what he did to it) and it wouldn't Flash properly either. When I try to flash these ROMs it will appear to flash properly and then they will go to the bootscreen and just sit there and churn. Depending on the ROM some will time out and power down the device and some will just sit there forever until I do a virtual battery pull. I'm freaking desperate to find out what is going on with this device and I don't feel right bugging Santod so I decided to post this in hope of more ideas about what could possibly be going on with my device. Any and all help greatly appreciated!!!
Thanks!
Click to expand...
Click to collapse
What did you use to s-off; firewater or sunshine? Are you able to flash/boot AOSP roms? Did you take the 1.55.605.2 OTA before?
krazie1 said:
What did you use to s-off; firewater or sunshine? Are you able to flash/boot AOSP roms? Did you take the 1.55.605.2 OTA before?
Click to expand...
Click to collapse
I used Firewater I'm able to Flash all of the Sense ROM's not sure if they are considered AOSP. Give me an example of one and I'll try it. I'm not 100% sure if I took the OTA update before I Rooted and S-offed/unlocked the device but I think I did. I Flashed Santods Nobootimg firmware via ADB to be sure I was on the latest firmware. I know my radios were up to date before doing this but I wasn't sure about the FW so I flashed it. Flashed fine, didn't need to flush again, flashed fine first time.
Duckman_UF said:
I used Firewater I'm able to Flash all of the Sense ROM's not sure if they are considered AOSP. Give me an example of one and I'll try it. I'm not 100% sure if I took the OTA update before I Rooted and S-offed/unlocked the device but I think I did. I Flashed Santods Nobootimg firmware via ADB to be sure I was on the latest firmware. I know my radios were up to date before doing this but I wasn't sure about the FW so I flashed it. Flashed fine, didn't need to flush again, flashed fine first time.
Click to expand...
Click to collapse
I'll post a link to a aosp ROM but first can you link me to the firmware file you flashed?
krazie1 said:
I'll post a link to a aosp ROM but first can you link me to the firmware file you flashed?
Click to expand...
Click to collapse
4th one down and this was per Santod's instuction so I'm sure it's good.
http://www.androidfilehost.com/?w=files&flid=13966
Duckman_UF said:
4th one down and this was per Santod's instuction so I'm sure it's good.
http://www.androidfilehost.com/?w=files&flid=13966
Click to expand...
Click to collapse
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
krazie1 said:
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
Click to expand...
Click to collapse
Yes, ADB Fastboot Hboot...exactly as video instructed. No problems at all.
I'll give it a shot!
krazie1 said:
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
Click to expand...
Click to collapse
Is a Gapps package needed for this ROM. Ive used Cyanogen ROM's before just not on this Phone.
Duckman_UF said:
Yes, ADB Fastboot Hboot...exactly as video instructed. No problems at all.
I'll give it a shot!
Click to expand...
Click to collapse
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
krazie1 said:
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
Click to expand...
Click to collapse
Thats what I thought..Thanks! About to dl Gapps and give it a shot.
krazie1 said:
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
Click to expand...
Click to collapse
Yep flashed fine...no problems.
Duckman_UF said:
Yep flashed fine...no problems.
Click to expand...
Click to collapse
OK then, did you try both GPE ROMs for the vzw variant? Download the newest version of sinlessrom and wipe advanced (cache, dalvik cache, data & system) in TWRP.
http://www.androidfilehost.com/?fid=23578570567721616
krazie1 said:
OK then, did you try both GPE ROMs for the vzw variant? Download the newest version of sinlessrom and wipe advanced (cache, dalvik cache, data & system) in TWRP.
http://www.androidfilehost.com/?fid=23578570567721616
Click to expand...
Click to collapse
Already tried...Various Roms, various versions, 2 versions of TWRP (As stated) Aroma, non Aroma...They all just sit there and churn away on the boot screen or power down the device. I always wipe in that fashion
Man I'm out of ideas, I really want to help but can't think of anything. I'll still look and see if I can find anything.
krazie1 said:
Man I'm out of ideas, I really want to help bit can't think of anything. I'll still look and see if I can find anything.
Click to expand...
Click to collapse
I really appreciate your help. Santod and me went back and forth via PM a few times and JayDee modified his Rom for me and now you. IDK....I'm dumbfounded. If you think of anything let me know. I'll just stay on AOSP for now. Always liked Cyanogen's stuff anyway, just never even thought about them since their ROMS are not in the forums. They used to be for my various other phones. Never really though about them not being on XDA until we did this just now. Thanks again for you time and help!!!
Duckman_UF said:
I really appreciate your help. Santod and me went back and forth via PM a few times and JayDee modified his Rom for me and now you. IDK....I'm dumbfounded. If you think of anything let me know. I'll just stay on AOSP for now. Always liked Cyanogen's stuff anyway, just never even thought about them since their ROMS are not in the forums. They used to be for my various other phones. Never really though about them not being on XDA until we did this just now. Thanks again for you time and help!!!
Click to expand...
Click to collapse
Yeah cm11 is what I'm currently using, it recently had a speakerphone issue but its been fixed since 7/30. The only AOSP ROMs that have incorporated the fix are cm11, liquidsmooth & aokp. Here is the section for all the aosp ROMs they are universal so means 1 zip for all HTC One M8 variants.
http://forum.xda-developers.com/htc-one-m8/orig-development
Have you tried a RUU?
young0ne said:
Have you tried a RUU?
Click to expand...
Click to collapse
What do you mean? I put the phone in RUU when when flashing the firmware with ADB??
Duckman_UF said:
What do you mean? I put the phone in RUU when when flashing the firmware with ADB??
Click to expand...
Click to collapse
it put stock back on the phone just like it was new out of box. it re installs everything from factory.
Thanks!
GNU con Linux

[Q] Xposed Framework on Cm12s?

Is it possible to install xposed framework on cm12s?
Through the xposed installer I always get an error: 'CANNOT LINK EXECUTABLE: could not load library "libdvm.so" needed by "/data/data/de.robv.android.xposed.installer/cache/app_process"; caused by library "libdvm.so" not found'
It also says that Xposed is not compatible with Android SDK Version 21 or my Processor architecture.
Obviously I am using a OnePlus One. With CM12s.
Thanks in advance,
TheKampfkeks96
I also have this issue. I haven't looked through any forums yet though, I just saw your post and thought I'd see if you had anything on it.
NoSyt15 said:
I also have this issue. I haven't looked through any forums yet though, I just saw your post and thought I'd see if you had anything on it.
Click to expand...
Click to collapse
Try to use the latest alpha. Also, there is an apk (installer) and one zip you need to flash in order to make it work.
Downloads:
xposed-arm-*.zip: Must be flashed with a custom recovery to install the framework.
XposedInstaller_3.0-alpha*.apk: Must be installed to manage installed modules
http://forum.xda-developers.com/showthread.php?t=3034811
davebugyi said:
Try to use the latest alpha. Also, there is an apk (installer) and one zip you need to flash in order to make it work.
Downloads:
xposed-arm-*.zip: Must be flashed with a custom recovery to install the framework.
XposedInstaller_3.0-alpha*.apk: Must be installed to manage installed modules
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Awesome. Thank you, I will try this now.
NoSyt15 said:
Awesome. Thank you, I will try this now.
Click to expand...
Click to collapse
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
fogame said:
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
Click to expand...
Click to collapse
Thank you very much, do you know when there will be a stable version?
fogame said:
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
Click to expand...
Click to collapse
Cm 12s is 5.0.2 not 5.1 so you should go with 3.0 alpha build 2 on official xposed thread..
TheKampfkeks96 said:
Thank you very much, do you know when there will be a stable version?
Click to expand...
Click to collapse
TheKampfkeks96 said:
Thank you very much, do you know when there will be a stable version?
Click to expand...
Click to collapse
Only time will tell. the Devs are working on it
kunal1540 said:
Cm 12s is 5.0.2 not 5.1 so you should go with 3.0 alpha build 2 on official xposed thread..
Click to expand...
Click to collapse
Lifesaver! Thank you... commonsense prevails :silly:
I updated my oneplus last night with the latest OTA YNG1TAS2I3 and my copy of xposed didnt work in TWRP... so searched and found the latest arm22 version.... this still didnt work.
Reading your comment made me think to go back to the original old school 3.0 alpha version - THIS WORKED.
Thank you again!
Thanks for the reply. But I think the rest of the OnePlus One users would like to know exactly where you down loaded the files and any installation instructions we may need. Not knowing what old school means in this case.
bmaz121 said:
Thanks for the reply. But I think the rest of the OnePlus One users would like to know exactly where you down loaded the files and any installation instructions we may need. Not knowing what old school means in this case.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3034811
I have downloaded it from the above link.
--> Download arm.zip and flash it and then wipe dalvik cache and reboot and be patient.
--> Download the alpha4.apk and install
--> You're good to go,Download your favourite modules
It worked for me
Donate to rovo89 or thank me or both:good:
Error with latest update YOG4PAS1N0
Hi,
flashed yesterday this Image (I am on TWRP), I tried to flash again flash 3.0 but I got an error from TWRP and when started the device was unusable (lot of FC).
Had to flash again the Image.
Anyone with this problem? I don't want to try again because the wipe cache and subsequent "Upgrading..."is excuciating
Thanks!
SergioBigred said:
Hi,
flashed yesterday this Image (I am on TWRP), I tried to flash again flash 3.0 but I got an error from TWRP and when started the device was unusable (lot of FC).
Had to flash again the Image.
Anyone with this problem? I don't want to try again because the wipe cache and subsequent "Upgrading..."is excuciating
Thanks!
Click to expand...
Click to collapse
I did not quite get your exact problem.Hence I am trying to reiterate clearly.
--> Download the arm.zip(not 64) file in the above link.Reboot to recovery(twrp).Go to install and locate the file and flash it and wipe dalvik/cache and reboot and be patient.
--> After reboot, download the .apk(alpha4) file from above link and install it and open the installed xposed installer app.
Hope it is more clear than my earlier comment and it helps you
OpO
ScreaMRooT said:
I did not quite get your exact problem.Hence I am trying to reiterate clearly.
--> Download the arm.zip(not 64) file in the above link.Reboot to recovery(twrp).Go to install and locate the file and flash it and wipe dalvik/cache and reboot and be patient.
--> After reboot, download the .apk(alpha4) file from above link and install it and open the installed xposed installer app.
Hope it is more clear than my earlier comment and it helps you
OpO
Click to expand...
Click to collapse
When you say be patient, how patient is patient? I've left it for 10-15 mins and still never gotten past the splash.
Which version is your OS?It worked in 5.0.2
OpO

CarbonROM Official

Hey there peoples of the internet...
Saw this right after it hit frontpage, but nothing has popped up [in the forums] informing users about it.
So... I'm just going to leave this here
https://www.xda-developers.com/carbonrom-android-oreo-now-available/
Downloading now...can't wait to test
BakedTator said:
Downloading now...can't wait to test
Click to expand...
Click to collapse
Please keep us posted. I'm very curious how this runs.
So far it's running good...works with the Linux upstream kernel for Los...installed Google camera with magisk mod no problem
Have to flash Gapps but that's easy, and yea...some themes don't wanna work with the system UI so try at your own risk...but for the first 2 hours it seems really good
BakedTator said:
So far it's running good...works with the Linux upstream kernel for Los...installed Google camera with magisk mod no problem
Have to flash Gapps but that's easy, and yea...some themes don't wanna work with the system UI so try at your own risk...but for the first 2 hours it seems really good
Click to expand...
Click to collapse
How much is better/worse than Los?
gregfink83 said:
How much is better/worse than Los?
Click to expand...
Click to collapse
More features as far as I know but about the same
BakedTator said:
So far it's running good...works with the Linux upstream kernel for Los...installed Google camera with magisk mod no problem
Have to flash Gapps but that's easy, and yea...some themes don't wanna work with the system UI so try at your own risk...but for the first 2 hours it seems really good
Click to expand...
Click to collapse
Can you please explain the steps. And which gapps, I am unable to flash gapps
amitbhavi said:
Can you please explain the steps. And which happens, I am unable to flash gapps
Click to expand...
Click to collapse
You first, need to pull the boot.img...ill leave instructions in the morning as I'm going to bed
amitbhavi said:
Can you please explain the steps. And which gapps, I am unable to flash gapps
Click to expand...
Click to collapse
Had this problem too. Tried flashing multiple gapps a plethora of different ways and was not ever able to get play store installed. I gave up and went back to stock
Goronok said:
Had this problem too. Tried flashing multiple gapps a plethora of different ways and was not ever able to get play store installed. I gave up and went back to stock
Click to expand...
Click to collapse
Here you go...to get Gapps installed, I used Gapps nano from open Gapps.
I just flashed the rom, rebooted to bootloader and flashed twrp, booted into recovery, flashed Gapps and the boot.img and was good to go
How can i get the Boot.img for the rom .... all i see is payload.bin and a few other files ... Thanks
tittieslover said:
How can i get the Boot.img for the rom .... all i see is payload.bin and a few other files ... Thanks
Click to expand...
Click to collapse
You have to use a dd command from the terminal in twrp
dd if=/dev/block/bootdevice/by-name/boot_a/b of=/sdcard/boot.img
Please replace the (a/b) with the slot that the rom flashed to
BakedTator said:
You have to use a dd command from the terminal in twrp
dd if=/dev/block/bootdevice/by-name/boot_a/b of=/sdcard/boot.img
Please replace the (a/b) with the slot that the rom flashed to
Click to expand...
Click to collapse
I used 3 different gapps. They all installed but could not get play services to stop crashing. Couldn't set up. Dam. Carbon is bad ars too.
tomzefi said:
I used 3 different gapps. They all installed but could not get play services to stop crashing. Couldn't set up. Dam. Carbon is bad ars too.
Click to expand...
Click to collapse
This is the exact same thing that happened to me.
fossiltkm said:
This is the exact same thing that happened to me.
Click to expand...
Click to collapse
Hopefully someone will figure it out. I want carbon. It's a good rom
Do I see in those screenshots that CarbonROM has OTA updates?
I loved CarbonROM back in the Good Old Days.
Skripka said:
Do I see in those screenshots that CarbonROM has OTA updates?
I loved CarbonROM back in the Good Old Days.
Click to expand...
Click to collapse
When I was going through the ROM and it's options it does have OTA now I don't know how that works on our phones with custom roms
Has anyone been able get GApps installed with this thing? I have tried both the suggested Mind The Gapps and Open GApps with no success...
paulr24 said:
Has anyone been able get GApps installed with this thing? I have tried both the suggested Mind The Gapps and Open GApps with no success...
Click to expand...
Click to collapse
did you follow the instructions few posts above?
For me it's not installing, it's that playservice keeps crashing

Categories

Resources