ICS Camera Driver Dev thread - EVO Shift 4G Android Development

I'm posting this in hopes to get more people involved in getting the camera working in ICS roms for the shift.
You will need to pull twistedumbrellas android_hardware_qcom_camera / 7x30 branch into your builds:
https://github.com/TwistedUmbrella/android_hardware_qcom_camera/tree/ics/7x30
Then add the following to your boardconfig.mk
Code:
TARGET_LEGACY_CAMERA := true
Pull the following from a gingerbread rom for the shift to build against:
A stock sense gingerbread rom should work fine.
libcamera.so
libmmipl.so
libmmjpeg.so
liboemcamera.so
Add a working media_profiles.xml to system/etc
Correct permissions in the init.rc by adding the following lines:
Code:
# Add permissions for camera access
chmod 0666 /dev/msm_camera/config0
chmod 0666 /dev/msm_camera/control0
chmod 0666 /dev/msm_camera/frame0
chmod 0666 /dev/graphics/fb0
Credits go to rapmv78 and twistedumbrella
rampv78s thread for the nexus:
Twistedumbrellas thread for the ace:

Is this the instructions to get it working or what you think COULD work? I'm sorry if it's a dumb question. It just wasn't very clear.
Sent from my PG06100 using xda premium

abadasstanker69 said:
Is this the instructions to get it working or what you think COULD work? I'm sorry if it's a dumb question. It just wasn't very clear.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
The instructions are to get it to work if you are building from source per twistedumbrella. I havent had time to do a full build with it so i posted this for anyone to try.
Sent from my PG06100 using XDA App

Sorry to be offtopic slightly, but what source tree are you using for the device?
Sent from my PG06100 using XDA App

zenulator said:
The instructions are to get it to work if you are building from source per twistedumbrella. I havent had time to do a full build with it so i posted this for anyone to try.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
I'll give it a shot if I ever get some time :-/ being a maintenance superintendent and moving is time consuming!
Sent from my PG06100 using xda premium

The source tree doesnt matter as long as the libs are compiled against the camera.msm7x30.so source.
The best bet for anyone trying this is to use evervolv or kushdeck since they have the speedy vendor and device setup then use twistedumbrellas msm7x30 source for the camera. Kushdeck has the qsd8 source in his github which should be changed out for twistedumbrellas.
Sent from my PG06100 using XDA App

if anyone manages to do this before me then twistedumbrellas link is down..i forked it from another so here is a working link:
https://github.com/JKILO/android_hardware_qcom_camera
im currently downloading source..slow connection..and i have a netbook to compile source with so again if you have a faster setup take a swing cause almost anything could beat me to it

JKILO said:
if anyone manages to do this before me then twistedumbrellas link is down..i forked it from another so here is a working link:
https://github.com/JKILO/android_hardware_qcom_camera
im currently downloading source..slow connection..and i have a netbook to compile source with so again if you have a faster setup take a swing cause almost anything could beat me to it
Click to expand...
Click to collapse
I would do it, but i have no idea on how to do any of this

jesuscash said:
I would do it, but i have no idea on how to do any of this
Click to expand...
Click to collapse
That's why this is a developer thread...

i have the build going through make right now..maybe itll work..will test later and post results

Disregard this post
Sent from my PG06100 using Tapatalk

Kushdeck has a build with partially working camera and GPS, check his twitter for more info.

Dread 7us said:
Kushdeck has a build with partially working camera and GPS, check his twitter for more info.
Click to expand...
Click to collapse
Sweetness. I will have a look.
Sent from my PG06100 using XDA App

Dread 7us said:
Kushdeck has a build with partially working camera and GPS, check his twitter for more info.
Click to expand...
Click to collapse
flashing now

sparksco said:
That's why this is a developer thread...
Click to expand...
Click to collapse
Come on man was this really called for? I think your primary objective is to belittle others that haven't read as much as you. And like my pm said you already know how I feel about you, all you do is cause problems man, to a once calm community, you know like back when someone found you trolling over twitter and you went and hid.....yeah we def want that sparkles back as a whole community because waking up reading your posts is getting a lot old, you don't know as much as you think you do and others have made that clear, but still your super dev of the decade smh and on that note im off to work
Sent from my Desire HD using Tapatalk

Well there is still work to be done in this thread. Such as video recording.....
As to some people taking things too seriously. There will always be people who post useless things just to post something and people get pissed. I've been here long enough to ignore it or if it gets bad I just pm a mod to clean the thread up. I have too much going on in my life to worry about he said she said crap. Its only a phone. In 6 months this crap will be obsolete and no one will care what you said.

Disregard post

Instead of arfueing let's get this camera working =D. Kushdeck's rom takes pictures decently. But it still needs work. Has anyone talked to him so see what developements he's made
Sent from my PG06100 using Tapatalk

I think it's great we have a dev that has the device to test things on, unlike many of the other devs that can make changes to things but can not really test since they don't own the device. Thanks for all your work zenulator. Between you and the rest of the devs I can't wait to see what you guys can accomplish together. I'm not very knowledgable with camera/video drivers, which is why I haven't been posting much here in the "dev" thread lol. Just wanted to stop by and say thanks.

sparksco said:
I think it's great we have a dev that has the device to test things on, unlike many of the other devs that can make changes to things but can not really test since they don't own the device. Thanks for all your work zenulator. Between you and the rest of the devs I can't wait to see what you guys can accomplish together. I'm not very knowledgable with camera/video drivers, which is why I haven't been posting much here in the "dev" thread lol. Just wanted to stop by and say thanks.
Click to expand...
Click to collapse
True this is a dev thread in the dev section. I put it up for people to discuss and try out instead of one dev magically making the camera work with no explination. Plus someone else compiling their own rom can add the code and needed steps to their build with out having to kang parts out of someone elses rom. Anyway its all for fun.
Sent from my PG06100 using XDA App

Related

Anyone want to test a CM 7 kanged build I just made?

I just need someone to test this quick. It's based of the CM 7 source. Nothing has been changed or modified. I just compiled it. I will be doing daily builds everyday
http://www.megaupload.com/?d=ZEWGSEAA
Alt link: http://db.tt/9u9SL1E
Just let me know if it boots and runs ok. It should though
If I get confirmation it works I'm posting a thread under dev that I will update everyday
File unavailable.
Sent from my LG-P999 using XDA App
Mistic99 said:
File unavailable.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Just saw that, it could be that I JUST uploaded it. I'm also uploading it to my drop box. I'll post that link too when it's done
http://db.tt/9u9SL1E
Sent from my HTC Glacier using Tapatalk
graffixnyc said:
I just need someone to test this quick. It's based of the CM 7 source. Nothing has been changed or modified. I just compiled it. I will be doing daily builds everyday
http://www.megaupload.com/?d=ZEWGSEAA
Just let me know if it boots and runs ok. It should though
If I get confirmation it works I'm posting a thread under dev that I will update everyday
Click to expand...
Click to collapse
Why bother posting it in developer section if it's the same as the nightly except for the fact that you are compiling it yourself?
mapin0518 said:
Why bother posting it in developer section if it's the same as the nightly except for the fact that you are compiling it yourself?
Click to expand...
Click to collapse
because when I mentioned I was doing builds for myself a bunch of people asked me to share them. That's why.. And before I even thought about posting them I asked Chris if it would be ok.
Mistake..
.....
graffixnyc said:
because when I mentioned I was doing builds for myself a bunch of people asked me to share them. That's why.. And before I even thought about posting them I asked Chris if it would be ok.
Click to expand...
Click to collapse
plus there is no nightly tonight so far so it gives crack flashers something to flash I dont think there were any device specific commits since last build but there have been GB base commits
Just flashed and booted OK.
Sent from my LG-P999 using Tapatalk
graffixnyc said:
plus there is no nightly tonight so far so it gives crack flashers something to flash I dont think there were any device specific commits since last build but there have been GB base commits
Click to expand...
Click to collapse
ah ok, just curious what this would add, i'll give it a shot!
It runs good so far.
Sent from my LG-P999 using XDA App
Done. It booted fine!

[Q] Is there anyone running a "custom built" version of CM7 that they could share?

[Q] Is there anyone running a "custom built" version of CM7 that they could share?
Hi all...
I would like to try a CM7 ROM on my Infuse but I am in no way too technical to make my own from source so...
I am wondering if there is anyone here who has built a nice CM7 from source that could maybe share so I can give it a go???
I hope this is not too much to ask and I thank you in advance...
Sent from my SAMSUNG-SGH-I997 using xda premium
Umm here is a version of CM7 we have had for a while now.
xIC-MACIx said:
Umm here is a version of CM7 we have had for a while now.
Click to expand...
Click to collapse
Thanks for the response but i don't see a d/l link to a specific ROM.
Perhaps I am blind but that is what I'm looking for... a working version that someone has created from source that I can flash via CWM...
Sent from my SensatioN-al Hellraising Rogers Infuse SGH-I997R B-)
yiannisthegreek said:
Thanks for the response but i don't see a d/l link to a specific ROM.
Perhaps I am blind but that is what I'm looking for... a working version that someone has created from source that I can flash via CWM...
Sent from my SensatioN-al Hellraising Rogers Infuse SGH-I997R B-)
Click to expand...
Click to collapse
Ya I just got done looking myself, I could have sworn I saw a link in there somewhere, I guess not...
Cm7 builds sent aloud to be posted
Sent from my SGH-I997 using XDA App
Ya never looked into it till now, if I had a comp that could handle all of that and I had a better grasp on Linux, I would try building my own from the source.
xIC-MACIx said:
Ya never looked into it till now, if I had a comp that could handle all of that and I had a better grasp on Linux, I would try building my own from the source.
Click to expand...
Click to collapse
That's my point exactly... I'd really like to try it but have no idea how to compile it on my own...
Sent from my SensatioN-al Hellraising Rogers Infuse SGH-I997R B-)
yiannisthegreek said:
That's my point exactly... I'd really like to try it but have no idea how to compile it on my own...
Sent from my SensatioN-al Hellraising Rogers Infuse SGH-I997R B-)
Click to expand...
Click to collapse
If you look through the cm7 thread a few users have posted it. Just that others hate when they do so they discourage it on that thread because they don't want extra bug reports.
Sent from my SGH-I997 using xda premium
nelomen said:
If you look through the cm7 thread a few users have posted it. Just that others hate when they do so they discourage it on that thread because they don't want extra bug reports.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
If there is any they will get deleted read the op Linux doesn't want any releases on there strictly none.
Sent from my SGH-I997 using XDA App
LG_iiNsTiiNcT said:
If there is any they will get deleted read the op Linux doesn't want any releases on there strictly none.
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
Perhaps then if someone can post it / them here it would be appreciated...
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
Perhaps then if someone can post it / them here it would be appreciated...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
No its not that he does not want it posted on that thread, he does not want it posted at all until it is finished.
If you look at other rom threads there are tons of questions that should not have been there. What he is doing is like a semi private beta, it will help fix problems faster without having to answer simple questions. Things like who do I flash this, will it work with this kernel, and such.
Now I am not saying that its not on the web but you will have to find it and not ask for a link.
I dedicated a virtual machine to building CM7, so I can pull from the source rep and do a snapshot build pretty much anytime.
Problem is that we are not supposed to share it. LinuxBozo posted somewhere why this restriction, but I don't recall the link. Maybe someone could remind what the url to that post is.
Adriano
Sent from my SGH-I997 using XDA App
People, if you want to share your own builds, I can't stop you. Hell, I don't even really care. I just ask if you do share, don't post them in the original thread, and make sure that whoever you are sharing with understands that this is currently not finished, has issues (especially with BT right now), and that unless they know what 'dmesg' and 'logcat' are, they will get absolutely no support from me and are on their own.
LinuxBozo said:
People, if you want to share your own builds, I can't stop you. Hell, I don't even really care. I just ask if you do share, don't post them in the original thread, and make sure that whoever you are sharing with understands that this is currently not finished, has issues (especially with BT right now), and that unless they know what 'dmesg' and 'logcat' are, they will get absolutely no support from me and are on their own.
Click to expand...
Click to collapse
You guys have to understand from his point of view. Do u know how many questions or post saying things need to get fixed would pop up the whole reason around building your own from source is that if you can do that you should be able to put out questions and answer that help instead of simple or complex things that have being covered if you have the basic understanding and you can actually help with issues address them correctly ina Manet that helps fix it than its easier to get things sorted out before a release. So he doesn't want them in the original thread. I would suggest if you can find someone to share it since you have the approval now have them pm you not share it over the thread or any other thread and don't share it your self so it doesn't cause the other thread or any other to get cramped with questions that can or can't be answered. So if you get it keep it to yourself to help with that factor
Sent from my SGH-I997 using XDA App
ok, so given that it is better not to post links to home-brew builds on these forums, I figured to put mine here:
http://tools.1url.ws/cm7infuse.php
for who's craving to run CM7 on their infuse, and doesn't have the time/setup/etc. to build it on his own.
All the warnings, disclaimers, etc. stand of course. No support provided, no guarantee I'll build more in the future. As time allows every few days I plan to grab the latest sources and do a new build to post it there.
At this time I'm using the 10/12/2011 build, and aside from the known issues, works pretty well for me. But then again, you might end up having a totally different experience.
- Adriano

[Q] Sense 4.0

i read on the rootzwiki forum for sensation that they successfully ported the Endeaver rom. Anyway we could get that ported to the MT4GS?
mattlowry said:
i read on the rootzwiki forum for sensation that they successfully ported the Endeaver rom. Anyway we could get that ported to the MT4GS?
Click to expand...
Click to collapse
Anything is possible, and if it was done for the sensation then there is a high chance it can be done for our device as well, since they are very similar.
Just takes someone to sit down and put time into making it happen.
I realize that you are making a request, but also that you are asking a question - so there's the answer to the question half - now it's just down to someone filling the request or you learning how to do it
i wouldnt even know where to begin...lol
Try with Dsixda's ROM kitchen.
Sent from my myTouch_4G_Slide using xda premium
Ohgami_Ichiro said:
Try with Dsixda's ROM kitchen.
Sent from my myTouch_4G_Slide using xda premium
Click to expand...
Click to collapse
That don't support the doubleshot, I'm trying to create a file to allow the kitchen to mount for doubleshot I get 2 errors while checking the script, and they are ifelse commands for system and data, every zip I've made has had a status 7 error
Sent from my myTouch_4G_Slide using Tapatalk
Interesting, hopefully that can be resolved. It was a very valuable tool for speeding up dev times.
Sent from my myTouch_4G_Slide using xda premium
Strapped, did you see this thread about porting sense to other sense phones?
http://forum.xda-developers.com/showthread.php?t=1222746
Sent from my myTouch_4G_Slide using xda premium
strapped365 said:
That don't support the doubleshot, I'm trying to create a file to allow the kitchen to mount for doubleshot I get 2 errors while checking the script, and they are ifelse commands for system and data, every zip I've made has had a status 7 error
Sent from my myTouch_4G_Slide using Tapatalk
Click to expand...
Click to collapse
if you do some searching, you will find a post with the doubleshot config file i posted some time ago..
It might be buggy right now but would be nice to get in early instead of grandfathered into a badass project.....tired of being the lost child in big dev.......would be nice to get a great dev to join their team to make this happen sooner than later....from the pics i have seen of sense 4.0 is is bad ass...not a lot of changes but much cleaner...
Ohgami_Ichiro said:
Strapped, did you see this thread about porting sense to other sense phones?
http://forum.xda-developers.com/showthread.php?t=1222746
Sent from my myTouch_4G_Slide using xda premium
Click to expand...
Click to collapse
Yeah i tried that the other day and i got a bootloop and i was to impatitent to run a logcat cause it was tuck in time
Sent from my myTouch_4G_Slide using Tapatalk
beezie916 said:
It might be buggy right now but would be nice to get in early instead of grandfathered into a badass project.....tired of being the lost child in big dev.......would be nice to get a great dev to join their team to make this happen sooner than later....from the pics i have seen of sense 4.0 is is bad ass...not a lot of changes but much cleaner...
Click to expand...
Click to collapse
its the design you like? grab the pngs and compile a theme probably. easier than porting a full rom.especially something so buggy...
tbalden said:
its the design you like? grab the pngs and compile a theme probably. easier than porting a full rom.especially something so buggy...
Click to expand...
Click to collapse
We definitely need people to work on themes for this device - I personally am not fond of graphics work, but went ahead and made 3 tutorials on how to work with the majority of the graphics on the device that are stickied in the 'Themes & Apps' section of the doubleshot forums. They are laid out in order of progression.
The only thing someone has to do is figure out how to actually wrap it up into a theme's package that can be installed and recognized by the device. Hopefully there will be interest in this.
nicholasb said:
if you do some searching, you will find a post with the doubleshot config file i posted some time ago..
Click to expand...
Click to collapse
Here ya go:
ADK doubleshot config
But this might be more helpful:
doubleshot Partitions and Mounts
Blue6IX said:
We definitely need people to work on themes for this device - I personally am not fond of graphics work, but went ahead and made 3 tutorials on how to work with the majority of the graphics on the device that are stickied in the 'Themes & Apps' section of the doubleshot forums. They are laid out in order of progression.
The only thing someone has to do is figure out how to actually wrap it up into a theme's package that can be installed and recognized by the device. Hopefully there will be interest in this.
Click to expand...
Click to collapse
I bet it's all the same for most of the ROMs with same sense version and resolution. Best bet is to grab the given ROMs original apks for themes, like Burgundy.apk etc in the given ROM, and start modding that, decompile, change images, compile, sign...the usual stuff.
mattlowry said:
i read on the rootzwiki forum for sensation that they successfully ported the Endeaver rom. Anyway we could get that ported to the MT4GS?
Click to expand...
Click to collapse
Possible with alot of work the problem is the Endeavor uses a bigger screen. I'm using a MIUI Port from the Sensation with the same issue then you have the issue of the keyboard.

CM9 Github

Guys I found this on one of the Cyanogenmod member's GitHub. He is adding lot of comments to his GithHub about Samsung Skyrocket. Check the link below, if anyone could make more sense of this then please explain. ( It looks like Alpha cm9 but I could be wrong )
1. https://github.com/darchstar
2. https://github.com/darchstar/cm_device_samsung_skyrocket
Very good infos.... Thanks.
Darchstar working on skyrocket cm9 is great news. Thanks for sharing! I would say that it want be long before our device sees an official cm9 build.
Sent from my GT-P7510 using xda premium
Can't wait to hear more about this thanks for the info
Sent from my SAMSUNG-SGH-I727 using XDA
Good thing I was already on the toilet. Anyone read the readme? Lol
R4INS said:
Good thing I was already on the toilet. Anyone read the readme? Lol
Click to expand...
Click to collapse
Wait you're supposed to read those?
Sent from my SAMSUNG-SGH-I727 using xda premium
BaconStep said:
Wait you're supposed to read those?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Oddly enough its actually optional. Who knew!
I am currently on Sprint, but bought a Skyrocket and I'm switching to AT&T next week.. Just want to let everyone know that darchstar is the reason I have CM9 currently on my Epic Touch so this is awesome news.. I can't wait to get CM9 on my Skyrocket!!
Sent from my SPH-D710 using XDA Premium App
I hope use soon cm9
Sent from my SAMSUNG-SGH-I727 using xda premium
also noticed TeamChopsticks has one going for the t989 too:
https://github.com/TeamChopsticks/cm_device_samsung_hercules
This is why the Evervolv collaboration is pretty much dead; top decided to go work on CM9.
a CM9 official Skyrocket Galaxy Nexus suck my sweaty you know.
This is what I've been waiting for. Patiently waiting ever so impatiently.
<insert witty signature here>
jomeister15 said:
This is why the Evervolv collaboration is pretty much dead; top decided to go work on CM9.
Click to expand...
Click to collapse
Really? Well at least he can bring all the knowledge and stuff u guys learned trying to get evervolv working with him. It'll save them time
Wonderful news!!! And yes, the readme is very informative: WORK IN PROGRESS. WILL EAT YOUR CAT. lmao!
I just bought a cat for sacrifice.
<insert witty signature here>
Uncle Irish said:
I just bought a cat for sacrifice.
<insert witty signature here>
Click to expand...
Click to collapse
Build and flash it!
Heck I don't even know if all the codes there. Never messed with android source.
hmm
anyone build this yet?
R4INS said:
Build and flash it!
Heck I don't even know if all the codes there. Never messed with android source.
Click to expand...
Click to collapse
I know enough to bork my phone, that's about it. Once they get things working all the way, I'll set up everything on my nix box and build it, but I would have no idea how to fix whats broken at this point.
Uncle Irish said:
I know enough to bork my phone, that's about it. Once they get things working all the way, I'll set up everything on my nix box and build it, but I would have no idea how to fix whats broken at this point.
Click to expand...
Click to collapse
Guys we have a officially supported device.
When they build it it will come.

Building Beanstalk 4.2.2?

I have zero experience building roms but i have recently switched from an Infuse 4G running the Beanstalk rom from scott.hart.bti. The rom has amazing customizations and too many features to list. It is based on CM10.1. I was hoping maybe somebody could help me port it over to the skyrocket. The beanstalk thread does have instructions for porting to other devices but having zero experience in doing so i thought i should ask for some help and see what other people are willing to do on this as well. The thread is here ->http://forum.xda-developers.com/showthread.php?t=2091900
freestylejunki32 said:
I have zero experience building roms but i have recently switched from an Infuse 4G running the Beanstalk rom from scott.hart.bti. The rom has amazing customizations and too many features to list. It is based on CM10.1. I was hoping maybe somebody could help me port it over to the skyrocket. The beanstalk thread does have instructions for porting to other devices but having zero experience in doing so i thought i should ask for some help and see what other people are willing to do on this as well. The thread is here ->http://forum.xda-developers.com/showthread.php?t=2091900
Click to expand...
Click to collapse
You should check out the Project Rookie thread in the Dev section. Those guys might be able/willing to give you a hand.
mrfeuss said:
You should check out the Project Rookie thread in the Dev section. Those guys might be able/willing to give you a hand.
Click to expand...
Click to collapse
I did read through that i just wasn't sure if i should post this here or in that thread. I was sort of hoping that somebody who knows how to do this stuff might try to build it as i cant even attempt to start for about a month as i am in the process of moving across the country. Figured if maybe people saw how many options there are in this rom it might spark some interest and get some more variety of roms to choose from (not that the roms available aren't already awesome )
This looks cool ... taking a crack at it today for the SR.
car vs driver said:
This looks cool ... taking a crack at it today for the SR.
Click to expand...
Click to collapse
Your a good egg bro!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Seems pretty well put together and simple to make it work on the SR since it is based on CM10.1 - if all goes well, I'll post a flashable zip for testing to the rookie thread at some point today.
Just waiting for the repo to finish syncing ....
car vs driver said:
Seems pretty well put together and simple to make it work on the SR since it is based on CM10.1 - if all goes well, I'll post a flashable zip for testing to the rookie thread at some point today.
Just waiting for the repo to finish syncing ....
Click to expand...
Click to collapse
Aww man thanks so much. You guys are awesome. When I get myself moved I want to take the time to learn all this stuff so I can contribute as well. Thanks again man. :thumbup:
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
No sweat. Just kicked off the build. Provided I don't run into any major snags I'll have something for you guys to flash later today.
car vs driver said:
No sweat. Just kicked off the build. Provided I don't run into any major snags I'll have something for you guys to flash later today.
Click to expand...
Click to collapse
You da man!
SGH-I727 Peace
Why is this in the Dev section did anyone else catch that
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Why is this in the Dev section did anyone else catch that
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I did notice, I just didn't think you'd appreciate someone else doing your job for you.
Lets keep on topic here ... if the mods want to move this, that's up to them.
And speaking of on topic, build is just about done. Had to restart it twice for a couple minor things that I messed up with the device specific inclusions. The vast majority of packages built just fine though, so it should be too much longer.
I also elected to build it with the Marla kernel, not the stock CM10.1 kernel.
car vs driver said:
Lets keep on topic here ... if the mods want to move this, that's up to them.
And speaking of on topic, build is just about done. Had to restart it twice for a couple minor things that I messed up with the device specific inclusions. The vast majority of packages built just fine though, so it should be too much longer.
I also elected to build it with the Marla kernel, not the stock CM10.1 kernel.
Click to expand...
Click to collapse
You're doing a great job around here man, I think I can speak for everyone in saying we all appreciate your work. keep it up!
Well, hello there ....
Edit:
Download posted to the Team Rookie thread. Waiting to hear back from Scott for approval and I'll start a new thread for official support and distribution of the ROM.
car vs driver said:
Well, hello there ....
Edit:
Download posted to the Team Rookie thread. Waiting to hear back from Scott for approval and I'll start a new thread for official support and distribution of the ROM.
Click to expand...
Click to collapse
Yeyeah! Just flashing it now. I'm excited to try this out. Good work!
car vs driver said:
Well, hello there ....
Edit:
Download posted to the Team Rookie thread. Waiting to hear back from Scott for approval and I'll start a new thread for official support and distribution of the ROM.
Click to expand...
Click to collapse
Awsome man thank you. That was fast haha. Running it right now seems to work great so far
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
You're welcome. Do me a favor, get this thread locked when you get a chance, I'm preparing a new thread to release the build officially and provide support.
Hopefully I'll have that posted up sometime this evening.
Also, thanks for bringing this ROM to our attention - I'm sure people are really going to dig it.
Great job porting CvD. It's running great so far!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
am i blind?? i am also interested in taking this for a spin, but I've refreshed the main development page, and don't see CvD's new thread on this ROM. Can someone point me to the download link?
cjd80 said:
am i blind?? i am also interested in taking this for a spin, but I've refreshed the main development page, and don't see CvD's new thread on this ROM. Can someone point me to the download link?
Click to expand...
Click to collapse
Go to protect rookie in the development forum
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Categories

Resources