Hi all,
I have a sensation for about 6 months.
But I wanted to change rom.
days ago I learned that ICS could be mounted on sensation.
I tried to install the RUU unofficial but without success.
unlock the bottloader via htcdev .
I managed to install the recovery.
following the various threads I have installed firmware and radio recommended for ics. after using superwipe
I installed the rom revolution hd 6.0.1 and told me the device successfully installed.
but when booting from htc white screen with green writing and will not be taken down.
I downloaded version 6.0.2 but nothing.
I realized that I gave in the dev hboot:
pvt ship's pyramid-on RL
HBOOT 1.18
the question is that I tried to load bakup and
the RUU without success because I always error image (prompts you to upgrade from version to version 9.999.99 of the RUU)
I tried to do supercid but can not overwrite the code myself, always giving me htc__405
With someone in the aid we have tried unsuccessfully more than one way.
To invite if anyone could help me supergene
How can I fix this?
I would like to avoid carrying your phone for repair
thanks
To install your RUU without errors, turn the phone on by holding power + volume down button, select fastboot from HBOOT screen, connect to your pc, wait for the drivers to install, run the RUU. It should work
If you want to move to ICS you need to install the firmware package correctly. Since you're saying you still are on 1.18, you probably didn't.
Before trying again you have to supercid OR follow mike1986's ICS firmware thread guide before installing the firmware package to install it correctly.
Why is supercid not working? do you have fastboot in your android-sdk-windows\platform-tools installation?
Grandelama said:
To install your RUU without errors, turn the phone on by holding power + volume down button, select fastboot from HBOOT screen, connect to your pc, wait for the drivers to install, run the RUU. It should work
If you want to move to ICS you need to install the firmware package correctly. Since you're saying you still are on 1.18, you probably didn't.
Before trying again you have to supercid OR follow mike1986's ICS firmware thread guide before installing the firmware package to install it correctly.
Why is supercid not working? do you have fastboot in your android-sdk-windows\platform-tools installation?
Click to expand...
Click to collapse
the problem is:
wathever ruu I tried to run appear error 155
i dont know why supercid didn' write code
scusa grandelama ma posso parlare in italiano?
ho visto la bandiera
yes but you should always put an english translation too.
So are you still getting the same error (155) also when you try to flash your RUU from HBOOT-fastboot USB mode? Or is the code changed? Which RUU are you trying to install?
Continui ad avere lo stesso errore 155 anche se provi ad installare la RUU avendo messo il telefono in fastboot USB mode dalla schermata dell'HBOOT?
Grandelama said:
yes but you should always put an english translation too.
So are you still getting the same error (155) also when you try to flash your RUU from HBOOT-fastboot USB mode? Or is the code changed? Which RUU are you trying to install?
Continui ad avere lo stesso errore 155 anche se provi ad installare la RUU avendo messo il telefono in fastboot USB mode dalla schermata dell'HBOOT?
Click to expand...
Click to collapse
the phone does not start for me. stops at the white boot screen.
So I tried and still I'm doing for fastboot usb mode
I think the problem lies in the image of the firmware, because when I get my firmware to the RUU to update with the new one tells me that mine is 9.999.999.99
or do not know what I've experienced.
I tried the gold card, but always the same error.
you can help me?
il telefono a me non parte. si ferma alla schermata bianca di avvio.
perciò ho tentato e tuttora lo sto facendo da fastboot usb mode
il problema secondo me sta nell'immagine del firmware, perche quando mi appare il mio firmware sulla ruu da aggiornare con quello nuovo mi dice che il mio è 9.999.999.99
oppure non so cosa mi sia capitato.
ho tentato la gold card ma da sempre lo stesso errore.
puoi essermi d'aiuto?
It's a tricky situation!!
Before giving up what I would do is:
try to unlock (completely) your bootloader with Revolutionary. I think it could be done without booting the phone. If you are stuck on "Waiting for device..." you should follow this wiki:http://wiki.rootzwiki.com/Revolutionary. And update Android SDK on you pc.
One other thing I would try is to install a custom rom based on your original RUU
I know,
but the problem is that the device boot only in hboot and when i try to boot normally it stuck on withe screen and thc green logo. then i can't use revolutionary.
i tryed to install custom rom but i had a bad results.
have you any idea to solve this problem.
tirone10 said:
I know,
but the problem is that the device boot only in hboot and when i try to boot normally it stuck on withe screen and thc green logo. then i can't use revolutionary.
Click to expand...
Click to collapse
What I was trying to say is that maybe you can run revolutionary from HBOOT....
Revolutionary FAQ said:
Make sure your phone is connected, powered on with USB Debugging enabled and in USB charge-only mode, OR in HBOOT USB/Fastboot mode.
Click to expand...
Click to collapse
What I was thinking is that if you used htcdev maybe revolutionary wasn't working for you even before bricking. Maybe because of some problem on your PC side (drivers, administrator rights, i don't know).
Just follow every advice on the guide I linked in the last post. Is your phone seen correctly by adb devices? are fastboot commands working? If they are not, what's the error they are giving?
sure,
the phone boot in hboot and the adb command prompt work to the phone.
if i try by htcdev to re-lock the phone and try to launch revolutionary?
I relocked the device with htc dev, run revolutionary as admin but it can't find the phone.
I'm not saying it will work, but I would try to do that before giving up.
If you manage to unlock with revolutionary you're probably safe, since the phone will be completely s-off and You'll be able to supercid, flash new bootloader ecc...
If revolutionary isn't working at first try i wouldn't give up. Install the drivers, install htc sync, connect the phone, uninstall htc sync, run as administrator, run in windows 7 compatibility...
i tried to run Revoulutionary.
get the device in hboot but revolut. didn't find it.
if the device is off revolut. open, get a message of adb and get close.
tirone10 said:
Hi all,
I have a sensation for about 6 months.
But I wanted to change rom.
days ago I learned that ICS could be mounted on sensation.
I tried to install the RUU unofficial but without success.
unlock the bottloader via htcdev .
I managed to install the recovery.
following the various threads I have installed firmware and radio recommended for ics. after using superwipe
I installed the rom revolution hd 6.0.1 and told me the device successfully installed.
but when booting from htc white screen with green writing and will not be taken down.
I downloaded version 6.0.2 but nothing.
I realized that I gave in the dev hboot:
pvt ship's pyramid-on RL
HBOOT 1.18
the question is that I tried to load bakup and
the RUU without success because I always error image (prompts you to upgrade from version to version 9.999.99 of the RUU)
I tried to do supercid but can not overwrite the code myself, always giving me htc__405
With someone in the aid we have tried unsuccessfully more than one way.
To invite if anyone could help me supergene
How can I fix this?
I would like to avoid carrying your phone for repair
thanks
Click to expand...
Click to collapse
hey.did you flashed ics firmware before install the ics rom??
Sent from my HTC Sensation using XDA App
yes,
but now if i try to install a ruu ics or gingerbread the exe says me that i have a 9.99.999.999 firmware in my device.
i think it's impossible.
can you help me?
Related
Hi Guys
I have tried to upgrade my phone to the 2.10 image, but it gave me a 170 error.
So I S-off ed the phone and tried to apply the 2.10 rru, but did not over-write the hboot, so gave me a blank screen.
I immediately applied the 1.47 rru, but still Alpharev hboot. Custom recovery is gone at this point and the ENG-Hboot 0.98.0.0 will not flash over the alpharev hboot in fastboot.
I know there are threads already about this, but non of them give a specific solution, so could I:
re S-off the phone and install Clockwork mod, then flash the eng hoot through CMW, then flash the 2.10 rru over that?
peemick said:
Hi Guys
I have tried to upgrade my phone to the 2.10 image, but it gave me a 170 error.
So I S-off ed the phone and tried to apply the 2.10 rru, but did not over-write the hboot, so gave me a blank screen.
I immediately applied the 1.47 rru, but still Alpharev hboot. Custom recovery is gone at this point and the ENG-Hboot 0.98.0.0 will not flash over the alpharev hboot in fastboot.
I know there are threads already about this, but non of them give a specific solution, so could I:
re S-off the phone and install Clockwork mod, then flash the eng hoot through CMW, then flash the 2.10 rru over that?
Click to expand...
Click to collapse
You should learn to read what the error is saying first:
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Click to expand...
Click to collapse
6. Q: If I encounter ERROR [170]: USB CONNECTION ERROR, what should I do?A: You can reset the Android phone and run the RUU again. If the problem persists, reset your PC and try again.
Click to expand...
Click to collapse
These are found on the GUIDE of the RUU.
You should try to reinstall HTC Sync or the HTC Naked Drivers.
Use Android Flasher to change your HBOOT first to ENG S-OFF, either the old or the leaked new one.
Then change your recovery from there.
Flash roms appropriately.
you should be able to do all of this if you still have the revo hboot.
Sorry it was a Cust error. was a TMO branded phone, but S-off and RUU 1.47 unbranded it.
Android Flasher still saying hboot bypassed when flashing the 0.98.00.00 S-off ENG-Hboot.
Can you think of anything else to try yo remove the Revo hboot?
I was with cyanogen mod 7.2 RC and ext4 for recovery and I wanted to test cyanogen 9 (Now on cyanogen 9 thread it is writen need a device htcdev Unlocked)
My device was Soff with revolutionary alpharevx....
I try HTCDEV unlock impossible (no token with the oem command)
So i read many pages on this desire S forum to downgrad boot ect...
I use DD command to flash eng HBOOT 0.98.0000
Now on my device start i have:
Saga PVT SHIP S-ON RL
HBOOT-0.98.0000
RADIO-3822.10.08.04_M
eMMMC-boot
(no eng :/ but 0.98 boot)
My recovery do not works anymore but my phone is not bricked i can fastboot but not adb
I can't download on filefactory (no more free slot) other RUU but I have EUR RUU 2.10.401.9 but it refuse to install (bad Id ... something like that)
i try to flash the recovery from the RUU rom.zip but he refuses: remote signature verify fail.
Do i need another RUU my GOAL is to S-OFF with HTCDEV to have cyanogenmod rom (7.2 and 9?) works.
What file i need to flash (flashboot sd card) ?
Plz help me i am really getting lost.
I'm quite confused. You wanted to switch ROMs, so where did HTC-DEV come into it?
Sent from my Desire S using Tapatalk 2 Beta-4
prerequise for this rom : http://forum.xda-developers.com/showthread.php?t=1429215
is : HTCdev unlocked devices only: Flash boot.img via fastboot
C'est juste une précision, comme quoi les gens qui ont utilisé htc-dev doivent flasher le boot.img séparément avec fastboot. Ca ne veux pas dire que tu dois obligatoirement passer par htc-dev. Tu es S-OFF, tu pouvais installer la rom directement comme n'importe quelle autre.
Sorry for answering in french.
Yeah you screwed up badly. The guide doesn't say you need it, its saying if you are HTCdev unlocked you need to flash the boot.img. if you are soff all you do is flash the ROM.
Rather install a 0.98 hboot RUU so you can s-off again afterwards.....
Should have asked or done some more research before acting...
Wait for a free slot.
HTCDEV is strongly discouraged. If you didn't have USB debugging on, I see no reason why ADB should work.
Calm down. Set the phone aside for a day. Rather than making posts, read through relevant posts and use the search button as often as you get the urge. Remember, Google search is as well your friend.
I can see how a non English speaker could have easily miss understood those instructions though, so I've suggested that nexx change the wording so that no one else makes the same mistake
Swyped form ym Dersie S unsig XAD Permuim
Hi,
I've some problem with my HTC ONE S s4.
S-OFF
HBOOT 2.16
RADIO-1.20
CID HTC__203 or SuperCID
- First, the hboot doesn't work correctly. When I select factory reset or clear storage, it redirect on recovery ???
- No ROM installed on. With the recovery, when I mount the SD, the partition have 40mb of capacity WTF ??
- When I launch the RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe I've the error 158 (error image). although it seems to me that it already worked with.
I've change the CID for HTC__203 because the phone is unbrand and FRA but not work grrr
I want return to stock or could install a rom correctly
Thanks in advance for your advice, I'm lost.
Now I've success with this RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed.exe
I'm on stock
I will try to unlock, root, recovery and new rom
Now I've success with this RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed.exe
I'm on stock
I will try to unlock, root, recovery and new rom
So my problem is the next one, i recently formated my sdcard which had maximushd rom on it and running as it was my daily rom, at te time i was on supercid but then i had started to do stupid things , i had s-on back on, changed the cid to roger001 but the phone is bought from germany unbranded ( i don`t know what was in my head), now i have managed to install a new rom on the phone but
My storage shows only 48mb, and i have tryed the tricks with stock recovery and then twrp 2610 it shows up 12gb but then after i install the rom is back to 48 or even 0mb,
So how the hell i solve this? and how to get back to stock, as i have tried to install a oficial ruu (zip or exe) and it says to get the correct rom.
OTA_Ville_U_JB_45_S_Globalive_WWE_3.16.1500.7_1.11.50.05.28_10.27.50.08L_release_3049068z393w1fez9cc9lt.zip on supercid didnt work, then i had changed it to roger001 it didn`t (obviousely) i have tried to change the cid again but it won`t let me without s-off but the first time it did let me, now my phone frezzes,
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe on this one now it says that my usb connection is lost right at the begining running it from windows or if i am flashing it trough fastboot it says remote sygnature fail,
So what i am doing wrong, at the moment i have managed to install magiorom with the storage issue,
my hboot is 2.16.0000
my radio is 1.20.50.05.16
htc one s ville(s4)
can someone help me to sort things out please
i have tried to change the cid trough fastboot comands or with hxd editor with no luck, please someone help me i am on this problem for days now, i have magiorom installed but it has storage problem as i am coming from maximus hd which i understood it caused the storage problem beacause of the firmware
Ok so first wipe your sd card for full storge
The download and use rumrunner if ths t dose not work use moonshine and if that one dise not work use firewater <this is for s-off
Now go back to your original cid and find stock recovery and run the ruu fir your phone
If you got this far then your phone is back to stock with s-off
Sent from my SPH-L710 using Nightmare Rom
Flashalot said:
Ok so first wipe your sd card for full storge
The download and use rumrunner if ths t dose not work use moonshine and if that one dise not work use firewater <this is for s-off
Now go back to your original cid and find stock recovery and run the ruu fir your phone
If you got this far then your phone is back to stock with s-off
Sent from my SPH-L710 using Nightmare Rom
Click to expand...
Click to collapse
thanks for the reply i have managed to sort things out with rumrunner ) now i am back to stock but with s-off )and rooted ) thank you
Hi Wizzards.
I tried to Flash a Costum Rom to my HTC One S.
I had no data to loose (But the phone) so I didnt make a backup
I have installed TWRP 3.1 and I can Access TWPR but not use it. Its like it cant communicate with the phone? somehow.
I tried to flas a wrong ROM for HBOOT 2.16 and Im on HBOOT 2.15 (Maby I need glases )
I can access bootloader and Fastboot, but cant communicate with PC, neither PC to Phone.
Så what i got is Access to Bootloader and TWRP 3.1
Have tryed to flash "stuck Recovery". Couldnt communicate.
Tryed to inastall ROM from TWRP. Didnt work either.
Have tryed to mount USB. My PC Cant see the Phone.
Have tryed to sideload ROM. But since i Wiped the phone ADB-doesnt work proberbly. (Maby its the TWRP image, there are wrong?)
Plz help getting my phone back to life.
Thx in advance!
rottigan said:
I can Access TWPR but not use it.
Click to expand...
Click to collapse
Recovery works correctly? Any error appears?
back again
Hi NH3
THX for being interested.
I might forgot to reply that my HTC One S is back.
Found the right RUU Installer and woilla.
And now om at Android 5.1.1
My HBOOT is 2.15.
Van I get to 2.16 without S-OFF?
Someone with info om that?
Thx
rottigan said:
Hi NH3
THX for being interested.
I might forgot to reply that my HTC One S is back.
Found the right RUU Installer and woilla.
And now om at Android 5.1.1
My HBOOT is 2.15.
Van I get to 2.16 without S-OFF?
Someone with info om that?
Thx
Click to expand...
Click to collapse
You cant. However S-Off is easy using Rum Runner and a Linux terminal