I rooted a rogers lg 3d , then removed some of the rogers apps and it bricked my phone into a reboot logo loop . I then flashed the king rom 3d 2.3 and i have my phone back , with no signal as i have old BB on the phone.
First question is , what baseband do I use for the lgp925g ? I have found the base bands but can not see one for north america .
Second question , Is there no 4G service on the replacement base bands ? Can i get 4g on it somehow ?
Third question is , I flashed the kind 3d 2.3 , is that rom for lgP920 or lgp295 and does it matter ?
Sorry guys for the questions , I did watch the noob video and LOL'd hard , then felt like a dirt bag for this post
Related
I am thinking of installing Kind 3d Rom on my O3D... is it necessary to install a baseband for Gingerbread first ? If so whats the best baseband available and how to install it ..... just like flashing custom rom or theres some other way .. ??
+ my O3d is working fine , so i dont install the baseband and update to 2.3 rom will it have it effect ... sometimes i loose connectivity and have to restart but i thinks that is due poor network coverage.
Hi, I only recently got my O3D and it was locked to one network. I bought an unlock code (had to wait for it) and preceded to install king rom. When I tried to put lock code in it wouldnt let me. I then realised that even an original network sim wouldnt work and my imei number was not showing on the phone.
Hence I found I needed to update the baseband to allow the network to be picked up.
So yes you need to, however I updated the baseband after gb install and it worked fine, not sure about doing the baseband update beforehand.
I used baseband v18 and whilst signal is not as good as my old defy, I am not complaining too much
Hope this helps
Sent from my LG-P920 using XDA App
You have to install baseband. It doesn't matter if you do it before or after flashing the rom
Sent from my LG-P920 using Tapatalk
tucka20 said:
Hi, I only recently got my O3D and it was locked to one network. I bought an unlock code (had to wait for it) and preceded to install king rom. When I tried to put lock code in it wouldnt let me. I then realised that even an original network sim wouldnt work and my imei number was not showing on the phone.
Hence I found I needed to update the baseband to allow the network to be picked up.
So yes you need to, however I updated the baseband after gb install and it worked fine, not sure about doing the baseband update beforehand.
I used baseband v18 and whilst signal is not as good as my old defy, I am not complaining too much
Hope this helps
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
Can u plz post the links for the basebands ..... ? R these basebands region specific ?
or should i try them one by one .....?
Is the baseband updated in the same way ?
Install CWM on mobile , flash the baseband ???
Hi all, noob guy here, i really need some help. I rooted my optimus 3d and installed ice cream sandwich rom, since then i cant use my phone or send txts, it does not regognise my sim card. the rom is working fine and looks great though.lol. Is there a way in which i can revert back to stock rom? any help would be really appreaciated.TIA.
Why don't you all simply just install the official Gingerbread update from LG and then afterwards try out the custom roms based on the Gingerbread release? I don't get it...
Is it that easy?just put it in the SD card and then install....etc??I am havinga cold feet installing any costume rom cause I hear this and that..I am on official GB 21A and rooted..donnu wat to to do really..
Hi to everyone.I just bought my O3d after SE Arc,and i love this phone,but im stuck with update to gingerbread,i was not able to flash baseband first so now i want to update to official gb but lg mobile support software say that my phone is up to date even than im on froyo 2.2.2,and in settings there is no option such as ota update or something like that.Can i update my O3d with lg pc suite 4?
Hi,
I am using AT&T Samsung Galaxy S II Skyrocket in Viet Nam, not in USA, because i like the way this Skyrocket phone design so i ask some of my friend bought one for me from US. But i got som problem with this phone when using in my 3G network carrier Mobifone , 3G data connection sometime lost and sometime good . So anyone have exprience with this kind of thing ? What radio version i should use between :
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
Original Shipped Rogers I727RUXKJ7 Radio and RIL
AT&T 2.3.6 OTA Update Radio I727ATTKK1 and RIL
T-Mobile T989UVKL1
in this topic : http://forum.xda-developers.com/showthread.php?t=1384865
Best regards,
I've seen about oversea(europe) thread.
Please refer it.
http://forum.xda-developers.com/showthread.php?t=1377114
But I've one question.
Does your Skyrocket gps fix time is fast in your vietnam country?
Normally gps lock time is about 5~10 sec.
because, I will purchase skyrocket, but some of phones are using agps surver using
their own country.(for example, T-mobile G2x using T-mobile a-gps server,
So it will cause gps fix laggy)
Pulverizer said:
I've seen about oversea(europe) thread.
Please refer it.
http://forum.xda-developers.com/showthread.php?t=1377114
But I've one question.
Does your Skyrocket gps fix time is fast in your vietnam country?
Normally gps lock time is about 5~10 sec.
because, I will purchase skyrocket, but some of phones are using agps surver using
their own country.(for example, T-mobile G2x using T-mobile a-gps server,
So it will cause gps fix laggy)
Click to expand...
Click to collapse
thanks you
GPS fix super fast here. If the weather good it make take just a few second. I am trying flash T989 rom to see if anything better.
you're welcome.
I think overseas users make a thread.
Isn't it? hehe
I am very very wodner that compatibility to
AT&T ROM(727) , Rogers ROM(727R), T-mobile ROM(989) all models?
For example, I will use to Odin.
* If I have a i727 ATT Device,
1) flash to i727R ? not bricked?
2) flash to i989 ? not bricked?
If I get a i727 ATT device, I will flash i727 Rogers ROM.
Because AT&T have many pre-load apks. And too many customizing.
Pulverizer said:
you're welcome.
I think overseas users make a thread.
Isn't it? hehe
I am very very wodner that compatibility to
AT&T ROM(727) , Rogers ROM(727R), T-mobile ROM(989) all models?
For example, I will use to Odin.
* If I have a i727 ATT Device,
1) flash to i727R ? not bricked?
2) flash to i989 ? not bricked?
If I get a i727 ATT device, I will flash i727 Rogers ROM.
Because AT&T have many pre-load apks. And too many customizing.
Click to expand...
Click to collapse
Hi. yes. i think we can flash flash those rom to any of those kind of phone because it have same hardware.
I also hate those pre-load apks, i am downding some "nake" rom without any preload apks from t989 phone and flash to my t727 phone. i will let me know the result in nex 40 minute
i flash the Juggernaut rom from T989 from here http://forum.xda-developers.com/showthread.php?t=1322642 but it look like 3G data connection not so good.
I flash to NeXusM0Di727 here : http://forum.xda-developers.com/showthread.php?t=1426590 and so far everything work great. Very good rom
Thanks for very useful information.
I am wondet yet what I buy i727 or t989.
Its very confused hehe...
Sent from my LG-P990 using XDA App
For someone who are using this i727 oversea .
I'v tried all the radio but in the end this radio : T989UVKL1 is the best now . Very strong singal .
Here are download link : http://www.ponack.net/TPC/dagnarf/cwm-tmob-kl1-radio.zip
It make by Da_G
Thanks for very useful information.
I purchased White i727 skyrocket. Its very very beauty!!
I wonder that Can I Flash i727R(Rogers) rom via odin tool?
I try find rogers i727R CWM image(ZIP), but I can't find it.
AT&T stock rom have too many bloat app and Can't use wifi hotspot(its only use AT&T SIM).
ok now i have problem with T989UVKL1 !!! It look like my baseband DEAD !!!! I alway lost signal , can't sms or receive sms , can't call or receive call . I reflash my phone with stock AT&T rom via odin but still no luck . it look like T989UVKL1 radio did something wrong in my phone
HELPPPPPPPPPPPPPP ! ! !
I recommend thay you will make new thread about your baseband problem.
Sent from my LG-P990 using XDA App
Hi, I installed an xball ICS Rom on my LG Optimus 3D, But I am having connectivity issues. I am in Delhi, India, the thing is until i m in delhi, It works fine, but as soon as I leave delhi, my network goes away. When I put the same sim in my other phone, the network comes back again. Can someone tell me, what is the correct baseband for india & how can I flash the baaseband? When I got the phone, I was on v10D.
Thanks
have a look in the ics basebands thread if anyone from india posted what he uses there
My friend had an HTC evo 3d and it broke so I bought him an epic 4g really cheap on eBay (not the touch). I rooted it and put cm 9 on it and sent him the phone. He lives in Colorado and I live in Louisiana. When he finally got the phone today he said the sprint store couldn't activate it and I read that you gotta be on the same android version as stock rom which is GB on that phone. Would he be able to flash a GB rom over the ICS rom in CWM? I Want To Try to make it as simple as possible for him because he is a noob to this stuff. Thanks
LOL so i know we just got "official ics " for our devices , but L9 (older twin brother ) has just received jellybean, so can anyone do there magic and get L9 working for o3d since lets face it , LG is not going to update our phone anymore
Also hypothetically if i flash the bin file for their firmware , how much damage will it do to my phone? im thinking of doing that lol
Bin won't work but you can always flash back.
L9 doesn't support 3D functionality . And as I know if you flash the *.bin you will full-brick your phone so you will need to flash the bootloaders .
Good to see people trying to port , maybe you can do it .
Sent From My LG-P880 (O4X) .
By Pressing "THANKS" You Will Help Me .
rezzsha said:
LOL so i know we just got "official ics " for our devices , but L9 (older twin brother ) has just received jellybean, so can anyone do there magic and get L9 working for o3d since lets face it , LG is not going to update our phone anymore
Also hypothetically if i flash the bin file for their firmware , how much damage will it do to my phone? im thinking of doing that lol
Click to expand...
Click to collapse
hypothetically it might boot but will not work the Display will not work at all
but the kernel sources might come in handy with CM10+ since its a JB kernel and as we all know the kernel is pretty much the same as the O3D
if you could extract the .img from bin it would be much safer but it's not worth it i said it before if L9 can has JB so can the O3D buy it only took a Year + few months for ICS Beta JB should be here 2015 Since LG hasn't officialy released ics they should just skip to JB if RC can do it in a few Days so can they Lazyyyyyyyyyyyyyyyyyyyyyyyyyyy LG