Related
hi im pretty new here a friend of mine gave me her lg c800 mytouch to try and fix it for her.. not sure what she did she said she rooted the phone and the root was successful but i have a good idea that she doesnt know what she was doing..i will post a pic of the error screen im getting. but it says
E:Cant find misc
E:cant find misc
Finding update package...
E:unknown volume for path [sd:/download/adb_fastboot_and_other_tools.Zip]
E:Cant mount SDCARD:/download/adb_fastboot_and_other_tools.zip
Installation aborted
facory reset failed
restart factory reset..
now im far from a pro at this i know a lil more about computers and Ios devices..but ive rooted a few phones and to me it looks like she unzipped adb fastboot on her phone from her sd card??
ive tried holding F..A..vol down..and power..Nothing..
ive tried volume up .volume down and power still nothing..
BUT if i hold E..vol UP and power it brings me to a white screen that says S/W update
the big problem is the phone wont stay on long enough to do anything on the computer it stays on 3 sec. then reboots to same screen (computer says phone is unplugged) then phone just keeps restarting.
but the phone WILL stay on when i put it on the S/W update screen..but computer wont recognize the phone at all on that screen
ive tried the adb and fastboot commands but the phone wont stay recognized..it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
well thanks ahead of time if anyone has any input or solution
and hopefully all this will make sense to someone lol
i think this pic will work.. if not ill try again
any ideas please?? or am i completely out of luck?
When you say:
delilah25 said:
it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
Click to expand...
Click to collapse
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
post-mortem said:
When you say:
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
Click to expand...
Click to collapse
Yes In Adb device list it shows the phone and then says recovery..but after that I don't have enough time to type any other commands ..the phone is also recognized in "my computer" as removable device then when the phone restarts seconds later it says device unplugged ..and just keeps restarting on its own till I remove the battery...I just read on the forum in a post that Adb will recognize the phone if it's off but I remove the battery and put it back in and plug in USB and phone turns on and keeps restarting won't even let me turn it off!! I'm losing patience with this thing lol
But I don't get why the error mentions fastboot? Not my phone so if it's not fixable I don't really care but I'm just the stuborn type when it comes to fixing electronics ..again thanks ahead of time to anyone that helps cuz I'm completely lost on this one
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
i have the same problem
post-mortem said:
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
Click to expand...
Click to collapse
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
diabolus ae said:
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
Click to expand...
Click to collapse
Normally, if you want to flash a custom recovery through fastboot, people will tell you to run 2 commands:
fastboot flash recovery nameofimagefile.img
fastboot reboot recovery
Since you don't have time to execute those 2 commands, you can tell it to just boot from the .img file, without flashing over your current recovery. (This is actually proper form, as you can test if the .img file works properly without damaging your existing recovery.) The way you do that is to 1st copy a recovery .img file to the root of your SD card, then execute the following 1 command:
fastboot boot nameofimagefile.img
Since you only have ~3 seconds, type the command in, and wait for the right instant to hit enter on the keyboard. If the command is successfully sent to the phone, it will reboot into that .img.
See if that works for you. Good luck.
Novice here.
Ran the All-in-One utility today and after the CWM installed I hit "Perm root" without reading the thing below telling me to boot to recovery first. It's now stuck in boot loop. Everything went off fine up until the Perm root. Even that said successful and then restarted. Only after the process was completed did the recovery loop begin. No HTC logo loop. Just reboots into CWM over and over no matter what technique I use (except for opening the case).
I've read this: http://forum.xda-developers.com/showthread.php?t=1599363
And am trying to install ADB to push ANY possible ROM over to the SD card. My recovery allows the toggle of /mount sdcard and /mount system, however adb fastboot push doesn't work. "error: device not found"
And I can't do this: http://forum.xda-developers.com/showthread.php?t=1644730 because my phone is stuck in the recovery loop. If I try volume down + power, it just comes back to recovery screen. I've tried factory reset, I've tried wiping cache, I've tried wiping Dalvik, and still nothing. I did flash the SuperSu.zip after I had used the Perm Root button on Haroon2000's app.
I'm incredibly flustered as I've rooted devices for years and this is my first problem. I've seen similar complaints all with ideas of breaking into the phone and unplugging it's battery so I can get to the bootloader etc, but I'm so very confused. So many posts telling me to do so many things.
Can someone please help break down a tangible solution here? I'm freaking out.
Cheers
EDIT: If someone can get my phone fixed, I'll Paypal them $50 USD. I really need my phone back ASAP :\
I don't know if this is your solution, but you did not mention it as one of your attempts.
Have you looked into running an RUU?
Sent from my HTC One S using xda premium
beats4x said:
I don't know if this is your solution, but you did not mention it as one of your attempts.
Have you looked into running an RUU?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
I'll update this again once I try breaking the phone down and yanking the battery. But I have tried running the RUU. I can't get to the bootloader right now and it's not listing the device when I adb devices.
I'm going to go home from work since I've spent 7 hours on two machines (XP/7) trying to fix this PoS and redo everything from the ground up. Hopefully my anger will have overcome it.
Something I've noticed however, is that within the CWM recovery, I can use the All-in-one tool to reboot the phone. So it is reacting to ADB commands. Perhaps trying to use ADB fastboot (Right-click method) instead of full ADB installation could be a problem with trying to push a ROM zip. Also, as far as the RUU goes. I don't remember what happened there. I'll edit this when I get home.
nik.the said:
I'll update this again once I try breaking the phone down and yanking the battery. But I have tried running the RUU. I can't get to the bootloader right now and it's not listing the device when I adb devices.
I'm going to go home from work since I've spent 7 hours on two machines (XP/7) trying to fix this PoS and redo everything from the ground up. Hopefully my anger will have overcome it.
Something I've noticed however, is that within the CWM recovery, I can use the All-in-one tool to reboot the phone. So it is reacting to ADB commands. Perhaps trying to use ADB fastboot (Right-click method) instead of full ADB installation could be a problem with trying to push a ROM zip. Also, as far as the RUU goes. I don't remember what happened there. I'll edit this when I get home.
Click to expand...
Click to collapse
Okay, update.
I was able to get ADB working and detect my phone.
Next, I was able to push Venom Rom to phone. I factory reset, wiped cache, wiped Dalvik, and was able to install Venom.zip. It then asked to reboot (per Venom screen) and I said okay. It then returned to CWM Recovery. I was confused but left everything as is. I have now reset the phone by holding the power button for around 10 seconds. It then restarted to the HTC Quietly Brilliant screen. I have been looking at that screen for about 5 minutes.
Also pertinent: I did try to run the RUU, but it didn't connect through USB. (I forget what it said verbatim). So that didn't work. I also was able prior to this entire process get into the bootloader via dumb luck.
Any suggestions? I am staring at the HTC boot screen still. Do I try to restart and enter bootloader? If so, then what? It seems there is something wrong with CWM. Can I switch recoveries? Can I uninstall it?
Calm down we have all been there,
When you flashed venom did you flash the boot image? Also i use twrp instead of cwm i find twrp better .
To enter bootloader hold power button and down vol together .
As gazknight said, this seems like proper kernel not being flashed or having an issue. If you flashed the boot.img with fastboot, try again erasing cache from fastboot first. The commands are as follow:
fastboot erase cache
fastboot flash boot boot.img (where this boot.img is the one inside the zip from the rom you choose and must be left in the same folder than fastboot)
It happened to me a couple times when i was on hboot 1.14 that I had to flash the boot.img a second time sometimes, somehow it was not working the first time, randomly, even though the flash had completed ok on fastboot.
If still doesn't work try doing a factory reset from TWRP and flashing ViperOneS again.
If that still doesn't work, you might want to try another rom, like TrickDroid, you would then have to flash the boot.img from this other room with fastboot, remember that.
Try and let us know
Hold down volume down while you're trying to boot, that will get you in boot loader, go to fast boot by pressing the power key, connect your phone to your computer, run the flash viper boot img thingy and you're set!
Envoyé depuis mon HTC One S avec Tapatalk
Same issue with HTC One S bricked but in European version, Stock ROM
hello,
I did't want to start a new topic, as I'm experiencing a similar issue with my HOS. Briefly, yesterday morning I plug the phone from charger at 06.00 am. Play with it for a while and then go to work. Used it at work for a few phone calls until 10.00 am (so 4 hours on fully charge battery). Then at 10.00 am I went into a meeting and left the phone out of my sight for 20-30 minutes. When I came back from the meeting I realize that the phone was closed. I try to open it (power button) but nothing. Press power for 10-30 seconds with volume down - still no effect.
Then I took the charger (the original one that I always use to cherge it) and plug it, left it for 2-3 minutes and press power. The phone starts but all I have is the white screen with HTC logo and if I press the power button + volume down the phone goes into bootloader. That's all I can do with it for now.
I have stock rom, bootloader is locked and I never try to root the phone. Is it any chance to repair it by myself or I have to sent it to the repair shop.
many thanks in advance.
Alright so I feel like I'm getting closer.
Here's whats happening now. It's in the HTC boot screen loop. I can get it into bootloader whenever I want, but now it's not detecting /sdcard in recovery. Within the bootloader, fastboot won't detect my device and my computer (Windows 8) claims the device is malfunctioning. I can still use fastboot adb commands from my computer when it is in recovery. I have gone into bootloader and cleared storage, as well as factory reset after. Also, it used to reboot into recovery endlessly. Now it appears that isn't hte case and reboots from recovery into the OS, but will not work.
I'm going to try and flash using adb w/o sdcard the boot.img as suggested above. I'll keep updating so others can know the process if they soft-brick their phone (I'm assuming this is a soft brick because I can still run things etc).
Update: trying to do fastboot erase cache from within recovery gives me "Waiting for device". As I've said, for some reason, it says the device is malfunctioning/not detected when I'm in the 1.14 Hboot Bootloader. But again, I can issue adb devices from within recovery. Sdcard still not mounting.
Edit: I'm issuing adb commands through adbfastboot files. Do I need to have the Android SDK fully installed with the Manager thing, or does the basic adbfastboot work (From here: http://www.htconeforum.com/forum/ht...e-your-htc-one-s-back-100-stock-relocked.html). That adb fastboot has the following files: adb, fastboot, adbwinapi.dll, adbwinusbapi.dll.
I think the source of the current problem is that I can no longer access my /sdcard or mount it. One step forward, then two steps back -_-.
nik.the said:
Alright so I feel like I'm getting closer.
Here's whats happening now. It's in the HTC boot screen loop. I can get it into bootloader whenever I want, but now it's not detecting /sdcard in recovery. Within the bootloader, fastboot won't detect my device and my computer (Windows 8) claims the device is malfunctioning. I can still use fastboot adb commands from my computer when it is in recovery. I have gone into bootloader and cleared storage, as well as factory reset after. Also, it used to reboot into recovery endlessly. Now it appears that isn't hte case and reboots from recovery into the OS, but will not work.
I'm going to try and flash using adb w/o sdcard the boot.img as suggested above. I'll keep updating so others can know the process if they soft-brick their phone (I'm assuming this is a soft brick because I can still run things etc).
Update: trying to do fastboot erase cache from within recovery gives me "Waiting for device". As I've said, for some reason, it says the device is malfunctioning/not detected when I'm in the 1.14 Hboot Bootloader. But again, I can issue adb devices from within recovery. Sdcard still not mounting.
Edit: I'm issuing adb commands through adbfastboot files. Do I need to have the Android SDK fully installed with the Manager thing, or does the basic adbfastboot work (From here: http://www.htconeforum.com/forum/ht...e-your-htc-one-s-back-100-stock-relocked.html). That adb fastboot has the following files: adb, fastboot, adbwinapi.dll, adbwinusbapi.dll.
I think the source of the current problem is that I can no longer access my /sdcard or mount it. One step forward, then two steps back -_-.
Click to expand...
Click to collapse
You might need to do it as administrator.
I think I've got it. One last tip. All of the above has been helpful, but I think the problem was trying to use my Windows 8 laptop. The second I got to work, I plugged it in on the bootloader to my XP machine and voila! it recognized fastboot and listed devices.
I have tried to run the RUU 2.35.531.7 but just like unrooting my old phone, I had issues because that update was already on this phone, so it goes through the entire process only to tell me on the windows XP utility that it had failed because it was the wrong update. When I did this to my old One S right before I sent it into Tmobile for warranty, it did the same thing with the 1.53 RUU, then when I found the 2.35, it worked like a charm.
So my last question (hopefully) then is, am I missing something as for installing an OLD or exact same RUU? Or is there a newer one than the 2.35.531.7?
I haven't tried on a Windows 7 machine, but I have one available here at work. I'm wondering if I should try to fastboot a ROM. Any suggestions what I can do to get it back to stock, or an old old stock version? I'd like to root it so I can use my Titanium Backup.
Update: Before ending this reply, I read that the RUU may be failing because the bootloader is unlocked/tampered still. I'm going to run it again to grab the error code to make sure of the issue, because it seems you should be able to revert or use any RUU (correct?).
nik.the said:
I think I've got it. One last tip. All of the above has been helpful, but I think the problem was trying to use my Windows 8 laptop. The second I got to work, I plugged it in on the bootloader to my XP machine and voila! it recognized fastboot and listed devices.
I have tried to run the RUU 2.35.531.7 but just like unrooting my old phone, I had issues because that update was already on this phone, so it goes through the entire process only to tell me on the windows XP utility that it had failed because it was the wrong update. When I did this to my old One S right before I sent it into Tmobile for warranty, it did the same thing with the 1.53 RUU, then when I found the 2.35, it worked like a charm.
So my last question (hopefully) then is, am I missing something as for installing an OLD or exact same RUU? Or is there a newer one than the 2.35.531.7?
I haven't tried on a Windows 7 machine, but I have one available here at work. I'm wondering if I should try to fastboot a ROM. Any suggestions what I can do to get it back to stock, or an old old stock version? I'd like to root it so I can use my Titanium Backup.
Update: Before ending this reply, I read that the RUU may be failing because the bootloader is unlocked/tampered still. I'm going to run it again to grab the error code to make sure of the issue, because it seems you should be able to revert or use any RUU (correct?).
Click to expand...
Click to collapse
The bootloader does need to be relocked for the RUU too work and the RUU you used before should work because I have used the same RUU a few times and it worked fine.
Darknites said:
The bootloader does need to be relocked for the RUU too work and the RUU you used before should work because I have used the same RUU a few times and it worked fine.
Click to expand...
Click to collapse
I'll try that. thanks.
Now on the same XP computer, it's not showing when I adb devices, however it does show in device manager. This changed after trying to do the RUU without relocking.
Yeah! Fixed!
After enough toggling, I changed the recovery to the T one and relocked my bootloader. It turns out detecting the device wasn't necessary somehow. Then I ran the RUU and voila!
nik.the said:
I'll try that. thanks.
Now on the same XP computer, it's not showing when I adb devices, however it does show in device manager. This changed after trying to do the RUU without relocking.
Click to expand...
Click to collapse
Not sure whats up with that, never had any issue on win7.
Windows 8 fastboot works on my laptop for some reason. I installed the drivers from the HTC Sync folder.
Sent from my HTC One S using Tapatalk 2
Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
The only way to download the stock rom backups is to remove the sd card from your phone, plug your sd card into a PC or other device with a card reader, download the stock backups, and place the stock backup rom files on your sd card. Finally place the sd card with the stock backup downloads into your phone.
These backups and information on how to go through this process can be found in this thread on page 2: http://forum.xda-developers.com/showthread.php?t=2001226
The key is to make a backup of your existing rom with twrp and then move the stock backups from your sd card to the twrp/backups/yourdeiceserial/ directory. That creates a backup directory which twrp knows to look for backups in.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app
UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
If that does not work you could drop it in water or something. You have not officially unlocked boot loader so you still have warranty. Or you could just tell sprint it quit working and act completely clueless. At least its bricked with warranty still intact.
matt2k12 said:
Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...
Click to expand...
Click to collapse
Both of the methods above are very effective. When I had the first photon I bricked it and just dropped it in water and did a claim. Depending on the insurance you have that way may cost you $100. The other method should work. When I first got this phone I did the exact same thing and to go back and unlock then flash twrp and in stall a stock backup someone had posted.
Sent from my XT897 using Tapatalk 2
UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Click to expand...
Click to collapse
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.
Hi again yall. You know once I got to thinking about it, I decided to check out the return policy on Amazon Wireless. They will accept any device under warranty for the first 30 days and it is up to Moto for the next 11 months of warranty coverage. They email me a packing label and it ships out 1 day and they ship out the new phone 1 day shipping. Hard to beat, just takes 2 days of shipping and some more fun times with my Epic, 10.1CM style, in the meantime.
Who's to say it wasnt some sort of hardware or software glitch that bricked the phone rather than my screwing around? Nobody knows and it isn't up to the consumer to prove his innocence. I bought everything legally, all the apps at the app store, and only ran the motofail2go root method. Wasn't running any custom Roms, Mods, or anything. I don't feel bad after they got me for another 2 grand for 24 months, and since I have been with Sprint for 10 years;l I have spent well over 10k or 15k with them lifetime.
If any other method pops up between now and when I ship it out I may give it a shot but if not, ah well, capitalism.
matt2k12 said:
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.
Click to expand...
Click to collapse
Try using adb. If your computer has drivers on it for phone you might able to get into fast boot. If that does not work I would try Sprint store first. Have locked my phone up several times while hacking wife off in progress and have used adb every time. Only time i have been truely scared is when i soft bricked my nexus 7. had to stay at work for two hours after i got off to get it to recover because i was scared of her lol.
---------- Post added at 02:05 PM ---------- Previous post was at 01:57 PM ----------
If you get adb to recognize device you could take chance and officially unlock boot loader. Then flash twrp. There is a thread in general section about having trouble getting official update. It has a stock recovery in it. Trick would be moving files to recovery section of twrp
I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app
UnicronAlpha99 said:
I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.
I don't blame you, it sounds easier to exchange in your case any way. The main suggestion I have is if you are getting into any type of build.prop or operating system tweaks that have potential to lead to boot loops or cause the phone not to boot, then unlock the bootloader and install custom recovery.
The Moto-fail method seems limited to only be able to run apps that require root. For me this has no use as I want to be able to have complete control over all aspects of the Android OS. There is not a huge mod community for the Q as yet but I believe Cyanogen will be a reality as Interloper continues working on it. I came from an Epic with Cyanogen and soft-bricked it a minimum of 50 times. CWM was very forgiving on that phone, the Q is a lot more finicky and frustrating.
If you have insurance through the carrier then you are going to pay $150 for a refurb if something goes wrong and you hard brick the phone. If you unlock bootloader and install custom recovery then you have a fail-safe in the form of nandroid backups and restores. Then you can mod away with little fear.
Good luck on the new phone and I hope you don't give up after six days of modding with the Q!
Sent from my XT897 using xda app-developers app
matt2k12 said:
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.
Click to expand...
Click to collapse
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?
matt2k12 said:
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?
Click to expand...
Click to collapse
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.
befrosty8612 said:
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.
Click to expand...
Click to collapse
Awesome, I am wanting to do the backdoor root method again but, of course, may brick it. I dont think Amazon will keep sending me new ones.... but maybe!
befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?
matt2k12 said:
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?
Click to expand...
Click to collapse
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?
befrosty8612 said:
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?
Click to expand...
Click to collapse
Thanks for the response. So, all I have to do is: go to fastboot and flash a stock recovery image file and it will automatically wipe the phone, cache, everything, and restore the operating system? Sounds awfully easy! I found some stock files in this post : http://forum.xda-developers.com/showthread.php?t=2001226&page=2 Are these the ones you used before?
Last question: I can flash CWM or TWRP but wont be able to access them if my bootloader is locked, correct? So flashing a stock recovery will allow me to have my stock phone back again, locked and un-rooted? I guess if I cant get it to work with the stock recovery then I can unlock the bootloader and do a CWM or TWRP recovery and then flash the stock .img files?
Thanks again for your help. I already had root with the motofail2go method which I like using but seems like when I try and use some generic root feature from apps from the app store that it will crash/brick the phone cuz obviously those apps are generalized and likely to brick certain percentage of devices....
Ok what does this mean? Something with the bootlaoder obviously. Does it need to be unlocked?
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash recover
y qrecovery1.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (5962 KB)...
OKAY [ 0.479s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.755s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
And on the phone screen it says "invalid image size for partition recovery" twice for both times I tried this method.
You will need to flash the system image as well if you want those, as the recovery image will only flash the recovery. The files in that link are for twrp only... so you'll have to be able to get there first.
With the custom recoveries, I'm not 100% sure whether or not you will be able to use them without being unlocked. I would wait to see if anyone else can answer that question for you, but if you did try it without an unlocked bootloader, you at least have the stock recovery to fall back on if needed.
Sent from my XT897 using xda app-developers app
---------- Post added at 09:16 PM ---------- Previous post was at 09:12 PM ----------
I'm thinking it could either be that your phone is full and the image you're flashing is too large to fit on the space available...
Or you're trying to flash custom software on a locked phone.
Hopefully someone is able to answer that a little better...
Sent from my XT897 using xda app-developers app
You can't alter the stock recovery (flash a custom recovery like twrp or cwm) in fastboot without having the bootloader unlocked. Your options are to unlock your bootloader, flash custom recovery, create a backup of your current setup, download one of the stock working backups, place it in the backups folder for twrp on your external sd card, and restore one of the known working backups in the development section (befrosty linked to one). Or you could use RSD lite to return to stock using a stock factory firmware flash. That involves connecting your phone to your PC and flashing the phone back to factory stock. Information on RSD Lite and links to the FXZ's can be found here.
http://forum.xda-developers.com/showthread.php?t=2095536
Sent from my XT897 using xda app-developers app
Hi there,
i have a huge problem. As there was no warrenty left for my One S I thought about to change the firmware to CM11.
I have to admit that i don't have any experience in doing such things, but i thought, it couldnt go wrong if i follow a tutorial.
So at first i unlocked the bootloader via HTC website and istalled TWRP 2.7.1 (latest version). Everything went well, I placed the ROM into the phones root directory, started the recovery and then whiped it before choosing install and selected the file. After about 30 seconds the phone reported the step was successful and i pressed reboot. Then there was the HTC starting screen and then a black screen.
After that i had no reaction but the blinking buttons when i press the power button for a longer time. But it changes nothing. No normal boot. No access to fastboot. Only if i connect it to my PC there is an aditional device to see, but whitout any access.
I know I did wrong but i have no idea what or how to fix it. I hope you can help me.
ElDorado1993
Now i found a way to get access to fastboot again, but i dont really know what to do now.
Can you give me an detailed tutorial, for jelly bean or kitkat (dont matter) that is surely working now?
My main problem is that i can't copy my files into the root directory as i cant boot the phone.
Does it show up in computer connected devices?
If it does, download stock kernel and ROM and upload to phone and go into recovery[power +volume up while off] and flash them both kernel first.
Sent from my ZTE_N9511 using XDA Free mobile app
The problem is the phone wasnt ever shown as device on the pc (like a flash drive) since version 4.1 so I allways needed some tricks like airdroid. So i suppose i need adb commands to copy files and i dont have so much experience in doing this.
Do you know how to use adb?You don't need adb I just wanted to know to see if it shows up there and not on computer you simply need to install the drivers.Try holding down all 3 buttons to see if it powers down. Do what it says http://www.technewscentral.co.uk/enter-fastbootbootloader-mode-htc-one/id_7930 if works go into fast boot. Does it say locked or unlocked. If unlocked go herehttps://github.com/koush/UniversalAdbDriver and get the windows installer if your on windows.
Sent from my ZTE_N9511
I now found out how adb and fastboot are working, but the main problem now is, that it says the sdcard cant be mounted. I tried this tutorial http://forum.xda-developers.com/showthread.php?p=25557817#post25850720 but i dont know how to do the first step. Du i need an extra file and where do i get it from and how to use it. As long as i dont get back this access, i couldnt install any OS. I tried also sideload. It was able to copy but cant install because of the missing sdcard access.
I hope you can help me to become my phone running again.
Go here http://m.youtube.com/watch?v=xWmnHwkDrKk but first type adb devices in cmd. If it shows ur HTC type adb shell and and type mount sdcard next to the "#" once it appears although you should be using the fastboot shell not adb commands.adb should only work on a powered on device or you can use fast boot in cmd while phone is in fastboot not recovery(you did say the phone can go into fast boot right?). Just make sure you got the right drivers and both fast boot and adb. You should get Koush's Universal drivers from my previous post since some phones have multiple drivers and MAY cause problems with cmd. Also HTC one S doesn't have expandable storage correct?
Sent from my ZTE_N9511
Wow. Now I incidentally soft bricked my phone again if you would believe it and nothing works this time.
Have you been able to fix?
Sent from my ZTE_N9511
Okay, i forgot to write but adb and fastboot are working on my Mac. I use the Mac because Win 8.1 has the known driver problems.
I tried a lot now, but i recognized maybe the main problem. My phone is still S-ON in bootloader. For sure thats the problem. Do I need to get rid of it and how do I do. The tutorial i used hasn't mentioned this step, maybe the person was still S-OFF.
The first thing i try now is to flash the original recovery, lock the bootloader and execute the original signed RUU to get back the original software first. Im going on holiday on tuesday and it would be a pitty without the phone. When I get it working i will leave it, and thy it again, when I'm back. Otherwise.......****
Use this tutorialhttp://htc-one.wonderhowto.com/how-to/fix-soft-bricked-htc-one-by-flashing-new-rom-via-adb-0154361/unless its the one you used already. From boot loader you were supposed to have gone to fastboot.boot loader has to be unlocked.From fast boot you flash TWRP.IMG which happens to have a special adb side load feature under advanced options. There you upload another ROM and kernel.here is the full list of supported devices as I don't know what variant or carrier you havehttp://teamw.in/twrp_view_all_devicesAlso, a stock kernel is optional but it always seems to fix my problems.
Sent from my ZTE_N9511
Thank you. But I already did it like this. The issue is, than after using sideload successfully the installation fails because of the known "unable to mount storage" text. And i don't know what to do wrong.
Like I already said, my phone is still S-ON, but can this make a difference?
Now i got it to bring the stock ROM running again, and as I'm on holiday for a few days I'm happy it is working again.
But one thing is left. It seems like there is no 3G/HSDPA connection now, only EDGE. I dont know what went wrong. Did you hear about this problem.
By the way, my phone is the standalone version whithout any provider.
Search the forums about edge only. There is a huge thread on this.
Ok, I'm an idiot. A big one.
I was looking to flash back to stock after using some lollipop roms. I was using TK's toolbox which was an extremely handy utility but in the peak of my madness, I hit lock bootloader with TWRP still installed.
Since hitting lock bootloader i'm not stuck with TWRP and it's crippled my phone since the current ROM no longer seems to be fully functional...I can't seem to download anything else from the web. Everything seems to fail.
I've tried fastboot oem unlock and it goes through the process that appears to be successful but it just boots back into TWRP and it's not unlocked. Does anyone have any suggestions or do I have a $300 paper weight. haha
Tonymhoffman said:
Ok, I'm an idiot. A big one.
I was looking to flash back to stock after using some lollipop roms. I was using TK's toolbox which was an extremely handy utility but in the peak of my madness, I hit lock bootloader with TWRP still installed.
Since hitting lock bootloader i'm not stuck with TWRP and it's crippled my phone since the current ROM no longer seems to be fully functional...I can't seem to download anything else from the web. Everything seems to fail.
I've tried fastboot oem unlock and it goes through the process that appears to be successful but it just boots back into TWRP and it's not unlocked. Does anyone have any suggestions or do I have a $300 paper weight. haha
Click to expand...
Click to collapse
Believe it or not, I have the same problem since yesterday. Its driving me mad since I'm no expert on rooting/unlocking
Phone gets detected by PC and by the toolbox but I can not unlock my phone again.
I am now stuck with TWRP and the only rom I can flash is Slimkat, all the others fail. If I hit unlock bootloader in the toolbox it goes through the process (fast) and it gives no error, boots back up to TWRP and thats it, but it is still locked
I just want it back locked and stocl CM11
Firstly, don't use toolkits. They are often the cause of issues.
Follow this thread to solve your problem: http://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390
Fixed it!
Solution: http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
PewLaserBeam said:
Fixed it!
Solution: http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
Click to expand...
Click to collapse
Damn you're lucky!
I'm having more issues because my phone won't let me download anything. It's like there is no SD card detected. I can't get that file onto my phone to flash it. Any ideas how I can do it?
I have ADB enabled and it shows up in my devices but it won't respond to adb sideload oneplusone-bootunlocker.zip
It responds to fastboot commands.. it just won't let me download anything off the net onto the device. IT will however update phone apps.. It's so damn frustrating.
Tonymhoffman said:
Damn you're lucky!
I'm having more issues because my phone won't let me download anything. It's like there is no SD card detected. I can't get that file onto my phone to flash it. Any ideas how I can do it?
I have ADB enabled and it shows up in my devices but it won't respond to adb sideload oneplusone-bootunlocker.zip
It responds to fastboot commands.. it just won't let me download anything off the net onto the device. IT will however update phone apps.. It's so damn frustrating.
Click to expand...
Click to collapse
I had this yesterday + I kept getting the message 'No OS installed'. Since it was already half 'broken', out of frustration I clicked everything and used all sorts of commands I could find (not the best idea I know :angel untill my PC detected the internal memory and then I downloaded 6-7 roms just to be sure. Slimkat was the only one without a fail.
How did you get the files over to your phone then if it wouldn't let you send them to it?
I finally got my internal memory to show up by mounting the system in the TWRP recovery.. But still getting an error that the device stopped responding or is disconnected.. However, it will let me open and view any file on the system, it just won't let me write to it.
Adb sideload did the fix for me after a while.
But it looks loke you have another problem.
Tonymhoffman said:
How did you get the files over to your phone then if it wouldn't let you send them to it?
I finally got my internal memory to show up by mounting the system in the TWRP recovery.. But still getting an error that the device stopped responding or is disconnected.. However, it will let me open and view any file on the system, it just won't let me write to it.
Click to expand...
Click to collapse
Instead of trying to sideload the unlocker zip have you tried using the adb push command?
Timma
Thanks for the reply. The solution for me was to mount the phone in TWRP. This allowed my SD card to be explored in Windows. However, it still would not allow me to copy files to the main directory and just out of frustration I quickly drag and dropped a PDF file that landed on a folder in the SD directory and it worked. Haha. So I then tried to copy the file inside another folder instead of the main directory. Success. What a headache and big ass mistake I'll never make again.
Note to self. Do not lock the bootloader with a custom recovery still installed. Ever.