Cant seem to get USB debugging to work on my Infuse no matter what I try.
I've tried different cables, different ports, even different computers -results are the same.
I'm running stock 2.3.6.
Any other ideas?
GO figure.
kgbros said:
Cant seem to get USB debugging to work on my Infuse no matter what I try.
I've tried different cables, different ports, even different computers -results are the same.
I'm running stock 2.3.6.
Any other ideas?
GO figure.
Click to expand...
Click to collapse
Factory reset. Thicker cable. NO pun intended.
Sent from my A500 using Tapatalk
kgbros said:
Cant seem to get USB debugging to work on my Infuse no matter what I try.
I've tried different cables, different ports, even different computers -results are the same.
I'm running stock 2.3.6.
Any other ideas?
GO figure.
Click to expand...
Click to collapse
Can you be more specific?
You mean you can't click on the USB debugging toggle?
Or are you trying to root a GB leak 2.3.6?
Trying to root the GB leak.
Yes I can toggle the USB check in settings but debugging never shows up when I connect the cables.
I might have to Odin a root ROM..just don't feel much like reloading apps and all that jazz.
Sent from my SAMSUNG-SGH-I997 using XDA App
kgbros said:
Trying to root the GB leak.
Yes I can toggle the USB check in settings but debugging never shows up when I connect the cables.
I might have to Odin a root ROM..just don't feel much like reloading apps and all that jazz.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
superoneclick doesn't work well on later than uckj4 leaks...some have reported success with repeated attempts.
you can get recovery by using odin or heimdall and flashing entropy's kernel or defuse kernel to get recovery and then flash your rom.
you could also odin or heimdall to a froyo then go from there
Hi everyone, I have had my Galaxy s 4g for almost a year. Its under warranty and I have a custom Rom on it. Recently, the USB port started actin weird and the phone is now unable to be recognized by the computer. When I plug it in to charge, if the phone is off, it will automatically turn on instead of the charging indicator. It can charge no problem and I have changed roms on it via cwm with the same result. Odin 1.85 nor does SuperClick 2.3.3 see it New cables dont work either. Im not sure what to do and I have to send this one back. Is there a way? Can anyone make a stock gingerbread cwm version without the root and no extras kinda like this one by Raver http://forum.xda-developers.com/showthread.php?t=1351783? Im new and dont know anyone or if that idea would even work.....
Can you see your sd card on your computer when you connect your phone to the computer?
Try plugging it into each USB port on your computer until it shows up, or if possible, try a different computer.
Yea, I tried those suggestions. Other devices work on all my computers with the same cable. The replacement phone works using the same accessories as well....Any other thoughts?
lumin30 said:
Can you see your sd card on your computer when you connect your phone to the computer?
Click to expand...
Click to collapse
Is that a yes or no?
Sorry, I meant to say no.
Chain fire has a mobile ODIN.
But you have to buy it, and Idk how reliable it is.
Sent from my SGH-T959V using xda premium
Im checking it out, is the galaxy 4g an I9000?
DreamHaxer said:
Im checking it out, is the galaxy 4g an I9000?
Click to expand...
Click to collapse
It is not.
Not sure if it works then. Its supports i9000 and some other funky models. Is their like an alternate code for the galaxy s4g that similar to i9000?
Well, can someone tell me atleast how to remove root from a ROM?
This morning, my Skyrocket overheated while charging. I can't connect anything to the usb port without frying the chord. It looks like I will have to take it back to AT&T, but I'm worried they won't do anything because it's rooted with a custom rom. Is there a way to restore stock without odin?
tsk5 said:
This morning, my Skyrocket overheated while charging. I can't connect anything to the usb port without frying the chord. It looks like I will have to take it back to AT&T, but I'm worried they won't do anything because it's rooted with a custom rom. Is there a way to restore stock without odin?
Click to expand...
Click to collapse
goto the first link in my sig there cwm flashable stock firmwares, but dont think they have the stock recovery
I was one of the new excited users of this exciting tablet particularly the option to use either my 16gb USB stick drive or mouse. Great christmas gift from my kids.
A couple of days ago I saw a message on home screen notifying of an android update to JB.
Well now I have JB 4.1.2 and all is just perfect except for OTG function is not working anymore.
At first I thought it was nothing and even blamed the OTG cable, waited the day later to try again. Nope it still doesn't work. None about the OTG. Even used new OTG cables.
Did a bit more reading online only to find out I wasn't the only one with this new problem courtesy of the JB update.
PLEASE..... Does anyone know of a fix?
Stupid question - Is it possible to reverse the android upgrade back to ICS?
My device is still stock by the way.
Still happy and excited of these tablet but not feeling the same for the upgrade.
Thanks in advance.
Its a strange issue have not used OTG with 4.1.2 but yes you can download your countries ICS firmware and flash it using ODIN though when you downgrade you may have to do a factory reset which means you will lose all data so make sure you do a backup
hello.. maybe you should try the stick adapter USB not cable. I'm not sure it will help, but for me solved this problem. My otg cable never works even on stock ics or jb so it might be different problem. First go to any media store and check it.. I did it and then bought..
samir_a said:
Its a strange issue have not used OTG with 4.1.2 but yes you can download your countries ICS firmware and flash it using ODIN though when you downgrade you may have to do a factory reset which means you will lose all data so make sure you do a backup
Click to expand...
Click to collapse
Thanks for the advise. I forgot to mention I'm not a very technical person.
Is there a prodedure to follow what uiunjust said?
Sent from my GT-N8013 using xda app-developers app
chabasse said:
hello.. maybe you should try the stick adapter USB not cable. I'm not sure it will help, but for me solved this problem. My otg cable never works even on stock ics or jb so it might be different problem. First go to any media store and check it.. I did it and then bought..
Click to expand...
Click to collapse
I did try that too and the usb adapter is getting power but do not recognize the memory attached to it.
BTW, my mouse also gets powered when I plug it to the OTG cable just no pointer, rendering it useless.
Sent from my GT-N8013 using xda app-developers app
I have a Samsung Galaxy S2 Skyrocket (SGH-I727 / AT&T) that I cannot get to connect to a PC after weeks of trying. I have tried to read through hundreds of threads regarding this issue and it seems others have had similar issues but nothing quite like this.
When I connect my phone to a PC, it does charge but Windows XP or Windows 7 will not recognize the phone. Anytime it is connected an error pops up stating "USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."
So to clarify, I have tried the following suggestions from others to troubleshoot and try to narrow down the issue:
1.) I have tried 4 separate USB cables, including the original OEM Samsung brand data cable that came with the phone.
2.) I have tried 3 separate PC's (2 with Windows 7, 1 with Windows XP).
3.) I have installed Samsung Kies on all 3 PCs, uninstalled and reinstalled the program as well as the Samsung Drivers on multiple occasions.
4.) I have done a factory/data reset on the phone twice to see if this was an issue caused by other apps I've downloaded in the past.
5.) I have tried to use USB Debugging/Developer option and then connect the phone to no avail.
6.) I have tried USB Mass Storage option before connecting the phone.
7.) I have tried to connect the phone to a PC in Samsung's default recovery mode and still showed it was not a recognizable device.
8.) I have tried a friend's galaxy S3 on all cables and PC's mentioned above and Kies immediately recognizes her phone.
9.) I have attempted to clean the physical microusb port with a small brush to make sure the contacts were clean and not being blocked by something.
10.)I have done a battery pull and about 20+ phone resets for all above mentioned attempts.
Based on all of these attempts without any success, it seems to me that this being a PHONE hardware issue is highly probable. I've ruled out just about every other scenario and I'm wondering at this point if my phone's Micro USB port is fried somehow.
Has anyone heard of this or is this a reasonable possibility?
I have tried just about everything I can so far, if anyone has any other suggestions or has any information that may confirm my suspicion, please let me know.
This all came about in the past week due to Jelly Bean being finally released by AT&T / Samsung for the Skyrocket and unfortunately, this update only seems to be available via Kies and a direct data cable to a PC. I have tried to go to Settings > About Phone > Software Update > Check for Updates (while connected to Wifi with a full battery) and the phone has told me 3 times over the past 3 days that my current Ice Cream Sandwich v4.0.4 Android is the most current software up to date. I'm guessing they're not planning on releasing Jelly Bean to the Skyrocket via OTA air updates....so now I'm stuck.
Bizarre issue you got there mate!
Sorry to disappoint you, but this isn't the right section for your device.
Please report ur post to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1372
Thank you..
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Bizarre issue you got there mate!
Sorry to disappoint you, but this isn't the right section for your device.
Please report ur post to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1372
Thank you..
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
you sent him to the i777 forum?
as to op, seems a bad/dead usb port
read this on installing stock firmware even w/a dead usb port http://forum.xda-developers.com/showthread.php?p=29977559#post29977559
vincom said:
you sent him to the i777 forum?
as to op, seems a bad/dead usb port
read this on installing stock firmware even w/a dead usb port http://forum.xda-developers.com/showthread.php?p=29977559#post29977559
Click to expand...
Click to collapse
Wow, thank you so much. This is the first thing I've seen from anyone regarding a possible fix outside of direct USB connection. I sincerely appreciate it!
xyberelite said:
Wow, thank you so much. This is the first thing I've seen from anyone regarding a possible fix outside of direct USB connection. I sincerely appreciate it!
Click to expand...
Click to collapse
You should also try a different computer if you can. It works on my laptop but not my pc. I have no idea why and have tried everything I can think of. Also, use the usb ports on the back of the computer, not the front
Edit: sorry I didn't read your whole post.
Sent from my SAMSUNG-SGH-I727
You should probably hit this.
vincom said:
you sent him to the i777 forum?
as to op, seems a bad/dead usb port
read this on installing stock firmware even w/a dead usb port http://forum.xda-developers.com/showthread.php?p=29977559#post29977559
Click to expand...
Click to collapse
Well after getting into the details on the post, it looks like this is created for a phone that already has a custom recovery such as CWM or TWRP installed. Since I do not have a USB port to use on this phone as of right now, is there any way to install a custom recovery on my phone without using USB?
I did download the stock 4.1.2 Jelly Bean firmware directly on the phone's default directory already and it's sitting there in a zip format. If I'm not able to root and/or install a custom recovery without using a USB cable, would it be possible to install the stock firmware using the default samsung recovery mode?
xyberelite said:
Well after getting into the details on the post, it looks like this is created for a phone that already has a custom recovery such as CWM or TWRP installed. Since I do not have a USB port to use on this phone as of right now, is there any way to install a custom recovery on my phone without using USB?
Click to expand...
Click to collapse
Yes you need to search the skyrocket threads the answer is out there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xyberelite said:
Well after getting into the details on the post, it looks like this is created for a phone that already has a custom recovery such as CWM or TWRP installed. Since I do not have a USB port to use on this phone as of right now, is there any way to install a custom recovery on my phone without using USB?
I did download the stock 4.1.2 Jelly Bean firmware directly on the phone's default directory already and it's sitting there in a zip format. If I'm not able to root and/or install a custom recovery without using a USB cable, would it be possible to install the stock firmware using the default samsung recovery mode?
Click to expand...
Click to collapse
no afaik, but read below
mtdew said:
Yes you need to search the skyrocket threads the answer is out there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
if there is ive never seen it, let us know how, that is how to install a rom/firmware w/out custom recovery and w/a dead usb port
Crap if he's bone stock then no if it were stock rooted he could use dd commands with terminal emulator.
Also nowhere in his description did he ever say he deleted the old drivers from device manager.
Also I'm wondering how you are installing these drivers.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
vincom said:
no afaik, but read below
if there is ive never seen it, let us know how, that is how to install a rom/firmware w/out custom recovery and w/a dead usb port
Click to expand...
Click to collapse
Well I did find this older thread that will supposedly allow me to install CWM and root without using a USB cable or PC. I'm going to try this since you all have confirmed that I'm not able to install a stock firmware/rom using stock recovery.
http://forum.xda-developers.com/showthread.php?t=1501719
Edit - Didn't work, apparently this was for 4.0.3, not 4.0.4.
I'm going to need to figure out how to root and get CWM on my phone just to install Stock Jelly Bean all without using a USB cable. Still no luck so far.
mtdew said:
Crap if he's bone stock then no if it were stock rooted he could use dd commands with terminal emulator.
Also nowhere in his description did he ever say he deleted the old drivers from device manager.
Also I'm wondering how you are installing these drivers.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I initially thought he had cwm/twrp installed
xyberelite said:
Well I did find this older thread that will supposedly allow me to install CWM and root without using a USB cable or PC. I'm going to try this since you all have confirmed that I'm not able to install a stock firmware/rom using stock recovery.
http://forum.xda-developers.com/showthread.php?t=1501719
Edit - Didn't work, apparently this was for 4.0.3, not 4.0.4.
I'm going to need to figure out how to root and get CWM on my phone just to install Stock Jelly Bean all without using a USB cable. Still no luck so far.
Click to expand...
Click to collapse
that's not for our phones, that would of bricked ur device if it had flashed successfully
get ur usb port fixed or try some tips in fixing it in the 1stop sticky
edit: try this http://forum.xda-developers.com/showpost.php?p=34906725&postcount=6
vincom said:
I initially thought he had cwm/twrp installed
that's not for our phones, that would of bricked ur device if it had flashed successfully
get ur usb port fixed or try some tips in fixing it in the 1stop sticky
edit: try this http://forum.xda-developers.com/showpost.php?p=34906725&postcount=6
Click to expand...
Click to collapse
It wouldn't work. Nothing will install in Android System Recovery <3e>. Everything I tried still came back with Signature Verification Failed.
I also tried lifting the "tongue" inside the usb port on the phone several times previously and that didn't work either. I must assume at this point the usb daughterboard or something inside is messed up.
Since stock recovery can't install any type of files and I can't connect the phone to a PC in any way and my phone is 100% stock without root or any custom recovery, I can only imagine I'm stuck in this situation. I have yet to see any solutions for getting root or installing CWM without having a USB connection that works. Unless I can do either of those things, it looks like I'm SOL for updating from ICS to JB.
If they had only made Jelly Bean an Over the Air update, none of this would be a problem really.
xyberelite said:
It wouldn't work. Nothing will install in Android System Recovery <3e>. Everything I tried still came back with Signature Verification Failed.
I also tried lifting the "tongue" inside the usb port on the phone several times previously and that didn't work either. I must assume at this point the usb daughterboard or something inside is messed up.
Since stock recovery can't install any type of files and I can't connect the phone to a PC in any way and my phone is 100% stock without root or any custom recovery, I can only imagine I'm stuck in this situation. I have yet to see any solutions for getting root or installing CWM without having a USB connection that works. Unless I can do either of those things, it looks like I'm SOL for updating from ICS to JB.
If they had only made Jelly Bean an Over the Air update, none of this would be a problem really.
Click to expand...
Click to collapse
Too dangerous the ota bricks tons of people when they do it I can only assume at&t is tired of it and opts for kies only. Also you could buy a daughter board and replace it. It's a relatively easy fix.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Too dangerous the ota bricks tons of people when they do it I can only assume at&t is tired of it and opts for kies only. Also you could buy a daughter board and replace it. It's a relatively easy fix.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
So .... lesson learned here is that you CANNOT root a phone or install any custom recoveries such as CWM or TWRP without having a working USB connection. As a result, you CANNOT install any updates, stock firmwares and especially custom roms without the above.
Only option at this point is to order the replacement part for the USB port on the phone or to purchase a new phone (if it's outside of the warranty period).
xyberelite said:
So .... lesson learned here is that you CANNOT root a phone or install any custom recoveries such as CWM or TWRP without having a working USB connection. As a result, you CANNOT install any updates, stock firmwares and especially custom roms without the above.
Only option at this point is to order the replacement part for the USB port on the phone or to purchase a new phone (if it's outside of the warranty period).
Click to expand...
Click to collapse
No you need USB to root that's it technically. If you have root you can install a recovery IMG without a computer using a terminal emulator and dd commands.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Thanks for the update. Hopefully it will help others:thumbup:
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
mtdew said:
No you need USB to root that's it technically. If you have root you can install a recovery IMG without a computer using a terminal emulator and dd commands.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
yes and no, its the chicken and the egg kind of question, for the sr to get root u need to flash the su files, but u need to have a custom recovery to flash the su files. is there a way to get the su files onto the sr w/out a custom recovery? I haven't seen one yet unless there was a oneclick method which I never used
vincom said:
yes and no, its the chicken and the egg kind of question, for the sr to get root u need to flash the su files, but u need to have a custom recovery to flash the su files. is there a way to get the su files onto the sr w/out a custom recovery? I haven't seen one yet unless there was a oneclick method which I never used
Click to expand...
Click to collapse
I used a one click waaaaaaaaay back when the phone was released probably wasn't supported lol but this was long ago on 2.3.5.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
I used a one click waaaaaaaaay back when the phone was released probably wasn't supported lol but this was long ago on 2.3.5.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
There is no one click available for 4.x forward.
I am wondering, however, if something like this would work:
http://forum.xda-developers.com/showthread.php?t=1877270