Weird stuff on the metal bezel - myTouch 4G General

My phone seems to collect weird stuff on its metal bezel. Even when the phone is in the Otterbox - still I get that weird dirt on it. Does anyone else has that?

Nope, the only problems with my bezel is that it's scratching off way to easily.

Related

Moko Ultra Slim Case issue

Well I really liked this case, I've had it for about 2 months. Yesterday one of the two magnet strips in embedded in the plastic that hold the cover close came out of the plastic and stayed on the lid's metal clip. I figured, well I'll just super glue it in and it'll be fine. But this morning I took a really good look at the case and found two hairline cracks in the plastic, one around each of the magnet pockets. I pulled on the pocket without the magnet in it with my fingernail and it broke the plastic. Very brittle! So I'm still going to try and glue it back together but does anyone else see these hairline cracks in their case? I've never dropped my note with/without the case. The only thing I can think that could even contribute to it would be having it in my truck in the center console in the summer. Never exposed to long direct sunlight, certainly nothing that would cause the case to become brittle.
I have had that case since May. It is my favorite case.
I have had no problems with it, and none of the "magnet problems" that some speak of. That may be because the magnets are strong enough for the job but quite weak in some ways.
When using the case as a stand I find the magnet to case actually weak.
I thought the case was great, until I saw the effect it had on the digitizer. With Artflow, whenever I drew near the left edge, the SPen produced severe scribbles. I was not able to draw a single straight line. I'm worried if it would permanently damage my digitizer, as that is the most important part of this tablet. I'm now looking for a stand-case without a magnet.
I'm planning to sell this case for $10 including shipping. If anybody's interested please contact me.
mankand007 said:
I thought the case was great, until I saw the effect it had on the digitizer. With Artflow, whenever I drew near the left edge, the SPen produced severe scribbles. I was not able to draw a single straight line. I'm worried if it would permanently damage my digitizer, as that is the most important part of this tablet. I'm now looking for a stand-case without a magnet.
I'm planning to sell this case for $10 including shipping. If anybody's interested please contact me.
Click to expand...
Click to collapse
One of THESE slim folio cases. I removed the magnet easily, and as it's hidden under the hand strap, you can't even tell.
kmeleon77 said:
Well I really liked this case, I've had it for about 2 months. Yesterday one of the two magnet strips in embedded in the plastic that hold the cover close came out of the plastic and stayed on the lid's metal clip. I figured, well I'll just super glue it in and it'll be fine. But this morning I took a really good look at the case and found two hairline cracks in the plastic, one around each of the magnet pockets. I pulled on the pocket without the magnet in it with my fingernail and it broke the plastic. Very brittle! So I'm still going to try and glue it back together but does anyone else see these hairline cracks in their case? I've never dropped my note with/without the case. The only thing I can think that could even contribute to it would be having it in my truck in the center console in the summer. Never exposed to long direct sunlight, certainly nothing that would cause the case to become brittle.
Click to expand...
Click to collapse
My magnets came out too, both of them. I glued them back in, although I figured out that you need to let them sit up a bit so the cover stays closed I see the start of cracks where the magnets are, but no real cracks.
My magnets are fine, no screen issues to note.
esoh said:
My magnets came out too, both of them. I glued them back in, although I figured out that you need to let them sit up a bit so the cover stays closed I see the start of cracks where the magnets are, but no real cracks.
My magnets are fine, no screen issues to note.
Click to expand...
Click to collapse
:crying: That is really suck. I will stay away from this case.
Bandage said:
One of THESE slim folio cases. I removed the magnet easily, and as it's hidden under the hand strap, you can't even tell.
Click to expand...
Click to collapse
Are the magnets really doing damage??? They have been using magnets in case for years...
I think that the magnet damage is a myth.
kendive said:
Are the magnets really doing damage??? They have been using magnets in case for years...
I think that the magnet damage is a myth.
Click to expand...
Click to collapse
Yeah, I've used them for years without issue as well...the magnets do interfere with s-pen usage, not sure of long term effects to the screen (ie dead spots)tho.

Does the type cover scratch the surfaces display?

Hello there,
do you guys know if the type cover scratches the surface display? I do know that mine is just a few weeks old and I was good to it, meaning it didn*t fall down or anything like that. Still, I got some scratches in it. I now think that this could be because of the type cover. Do you guys have any experience with that. And: Are there better covers out there, maybe even thinner? I don't need the keys all the time anyway.
The type cover,you mean the keyboard thingy?it never did scratch my surface
Sent from my HTC S510b using Tapatalk 2
2 covers available at the moment. The type cover and the touch cover. They are being replaced with the type 2 and touch 2 which are slightly slimmer, backlit and in the case of the touch 2 have more sensors so should be more accurate plus support multitouch gestures on the trackpad. There is also the power cover which seems to be a thicker type cover with a battery in it for charging a surface pro, surface pro 2 or surface 2 but *not* the surface RT (where it would just serve as a thicker type cover).
None of those cases should scratch the display. They are plastic, the screen is gorilla glass. Gorilla glass can only really be damaged by very sharp edges, sand/other grit and a few minerals. In your case most likely grit damaged it. Plastic could not scratch it.
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
johnchad14 said:
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
Click to expand...
Click to collapse
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Sephi said:
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Click to expand...
Click to collapse
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
SixSixSevenSeven said:
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
Click to expand...
Click to collapse
No, it's really not. For example, my Galaxy Note, and I really really wasn't good to it and it fell down quite a few times or were together with my keys in my pocket - does not have any noticable scratches. The Surface however has quite some big, deep ones which are clearly noticable even when the screen is on. And I don't know there they are supposed to come from other than the type cover.
OK, the type cover is DEFINITLY scratching the display. I got a few more scratches today after I took it with me in my bag and used the type cover as protection. The scratches all look kinda similiar and they are all in the upper region, I guess there is more contraction there. Horrible, I would NOT use the type cover as an actual display protection.
The strange thing is the scratches are all in the area without keys, the area where the touchpad is but to the sides, so it's no rough surface (no pun intended). I don't know where the scratches are coming from en masse but they are there, it's horrible. I know ordered this bag here: http://www.amazon.de/dp/B00D1HQPQC/ref=pe_386171_38075861_TE_item
Any thoughts?
Thats an absolute physical impossibility.
All materials have a hardness (or several hardnesses dependant on the method of measurement but the general principle applies the same).
In order for material A to scratch material B, material A must be harder than material B.
Plastic is not as hard as gorilla glass, nor is it rough edged (a very sharp point of a softer material if forced hard enough will scratch another harder material). Expecting a flat piece of plastic to scratch the glass on the surface is like throwing a ball in the air and expecting it to fall, doesn't happen.
If there is something in between then it can happen. Sand for example, it is harder than gorilla glass, its also a small particle that tends to stick to your screen so when you shut the cover on it the cover will be forcing the sand into the screen, due to the nature of the hinge on the surface the cover can wobble forwards and back a few mm rubbing the sand grain over a small area. Other bits of dirt can do it again, small bits of mud or whatever.
Plastic at most could only transfer the coating of the plastic to the glass which would wipe off, and that I highly doubt would happen.
As for more contraction, that would entirely be down to how you store the device. The touch cover only attaches with a simple flap, its free to drop open or closed at any time, if its stored with slightly more force in one corner then its not going to apply the force terribly equally across the device.
But where is it coming from? Scratches are everywhere and by no chance I got sand in my bag or anywhere else. It's been months since the last time I saw some sand. Living in the middle of germany.
It doesnt necessarily have to be beach sand. Concrete dust, mud, construction sand. All could do it (mud less so). Sand has a tendancy to hide in small spots in bags if there is any (or transfer from other items). Anything could be the cause, i find it highly unlikely to be the cover itself.
One thing you could try, can you find a sheet of soft fabric or foam or something that you could cut to size and wedge between the cover and screen. Might reduce the impact of whatever is going on. Can keep the sheet loose in your bag, stick it in when closing the cover. Or simply fold the keyboard over the back of the unit and put it in a netbook sleeve but that would be leaving the glass exposed to knocks etc
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Sephi said:
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Click to expand...
Click to collapse
YES, the type cover WILL scratch the display. I have heard it from other people and I have it myself.
NO, it is not the material, it is any grit that gets trapped in between them. Get a tiny grain of sand in there, you are in trouble.
YES, I use a screen protector now and it is getting trashed.
NOW I carry a large micro fiber cloth in my carrying case. Before putting the Surface away, I wipe off the display and keyboard. That has reduce the amount of damage. I'll still need to replace the screen protector often, but I'm OK with that compared to more glass damage.
I hate screen protectors with a passion. I will just stop using type cover then...
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Indeed it does. I bought mine on Sunday night. Monday afternoon I noticed a scratch/pit on my screen when I was cleaning it off. I looked at the type cover, and there was a piece of grit/sand stuck in the soft, flat part where my right palm is not supposed to rest.
:crying:
willusdun said:
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Click to expand...
Click to collapse
Microsoft likely did consider it, and decided that having a slimmer overall product would generate more revenue.
Some laptops dont have this issue because they have "spacers" around the screen that maintain a small gap between the keys and the screen when closed.
My Thinkpad has markings on its screen from its own keyboard, even though theres a massive 2-3mm gap between the keys and screen when closed. This is because the screen can flex a bit and likely got smushed into my keys (I'm pretty rough with my Thinkpad).
There isnt much you can do about it, almost every product has this issue.
My HTC One sits in my pocket with nothing else in it, and it has markings on it. I haven't been anywhere near a beach since I got the phone.
So like someone else said, all sorts of particles can scratch your screen.
Even Macbooks have this issue, its the reason why people sell specially cut microfiber cloths that are meant to be placed between screen and keyboard when Macbook is closed.
Either get a screen protector, deal with it, or wait a few decades until they make glass strong enough to resist everything.
My HP sleekbook has an imprint from the keys on the screen. I had my laptop bag on the passenger seat of my car, was cut up really badly by someone at 50mph, immediately wished that my car had decent ABS which it doesnt as it made a nice tyre squeal. Laptop bag slammed to floor, opened it up, laptop 100% intact, just has key imprints on the screen which are actually rubbing off (does literally seem to be dirt rather than physical damage).
I have my Surface RT with touch cover. I have been using it for a year. I never put any screen protector and I have scratches on screen. I carry my surface in my bag pretty much every week day. I don't find the scratches affecting any usability or affecting the quality of display. When the screen lights up while using, you are not going to see those scratches that easy. Only when screen off and at certain angle you will be able to see some. It's just a device for use for couple years, relax and enjoy it. Putting screen protector will protect the screen from scratches, but degrade your display color, viewing angle, reflection, brigtness, touch feel, etc.

Spigen strong flex case

Has anyone had any issues with this case scratching the metal lining of their phone?
Yeah I just noticed that. It's mainly at the top and bottom by the earpiece and home button. I just don't understand how the case could do that.
Yes, the inside side part of the case is a bit too sharp.
I like the feel I this case tho. I hate that it scratches the metal
Same here, only very small scratching tho and honestly i dont see how you can avoid it with any case. All you need to do is use a small thin piece of electrical tape to cover metal part and no more scratches. Also if you use the heart rate sensor good luck with this case. I dont use it so it didnt matter to me.
Ive also noticed this. I hate it but oh well i guess. It's from taking the case off. So leave the case on or be careful i guess.

Problems Caused by Orzly Fusion Bumper Case?

Hi
Does anyone else here own that case?
It seems to me that its a bit too tight on the device, causing problems...
First of all the pressure on the corners when taking the case off made the plastic going around the screen near the metal frame just broke on the top left corner. [I will try to upload a picture later]
Also, tiny dust/sand/others stuck between the case and the device are pressing so hard on it, it leaves marks on the aluminium (which is not very strong..). So now I have two dots on the bottom of the device and 3-4 on the back. I bought a dbrand skin (actually not because of the marks) so these are less a problem, but the plastic that broke is annoying.
I CANT BE SURE ITS CAUSED BY THE CASE!
I'm almost sure, especially the plastic breaking, but I can't be 100% sure.
Thats why I opened this thread... Wanted to know if anyone else owns this case and had similar problems.
I own and use that case too and have no problems whatsoever.
EnterLordVader said:
I own and use that case too and have no problems whatsoever.
Click to expand...
Click to collapse
Is it tight and requires some force (compared to other cases, not extreme force..) to take off?
DubelBoom said:
Is it tight and requires some force (compared to other cases, not extreme force..) to take off?
Click to expand...
Click to collapse
The Supcase and Speck are very tight fitting cases. Neither case has subjected my phone to any marks or damage.
I also had this case - ended up with lots dents in back of phone from dirt getting in around camera and power cord cut out. Very annoyed and disappointed.

factory protective film damaged my screen

I bought an S8+ on in October after cracking my phone during a trip. Since I wasn't sure if I'd want to keep it vs repairing my S7 Edge, I kept the factory protective films on the screen and back glass during Best Buy's return period.
This backfired when the front film came loose a handful of times. When it happened, I'd simply smooth it back down before dirt or lint could get in. However, when I ultimately removed the film, I noticed that grease etc would collect along several roughly horizontal lines where the peeling I described had halted.
Assuming this was just some residue from the film, I polished with a lint free cloth and got a mirror surface. Problem solved, I thought. But grease quickly builds up in the same places again. I tried mild dish soap, isopropyl alcohol, lens cleaner, and physically scraping with a fingernail--all with no improvement.
You think you're doing something, because you can see the line of greasy stuff being disturbed and removed, and the clean surface looks perfect. But there's something fundamentally different about the surface in these spots that re-attracts the grease--I can also see it holding on to water condensation differently.
After reading a bit I've concluded there's probably an oleophobic coating on these screens that got messed up by interacting with the creased film. It's more than a little disturbing and ironic that Samsung's own protective film should mar the screen in a way that's at least persistent, if not permanent. I'd recommend anyone buying an s8/s8+ take the damn thing off immediately in favor of whatever aftermarket protection they've chosen, or just leave it bare.
Has anyone else experienced this kind of thing and been able to address it successfully? Don't want to go off half-cocked with abrasives or harsh chemicals. I see there are oleophobic coating refreshers on the market, but I don't know how well they work on non-uniform damage.
Well sounds like your olephobic coating has come away. It is possible it was always not perfect. My screen has a patch of olephobic coating by the speaker grille that is missing from new. The initial cover isn't a screen protector so in my opinion is should be replaced immediately.

Categories

Resources