[Q] How can I remove clockwork recovery? - LG Optimus 3D

Pls help me,how can I remove clockwork recovery?

I have the same question.

you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off, run LG mobile update connect usb cable hold power and volume up hold it for 10 seconds let go then do it again for 10 seconds LG update should say phones connected if not do it again
click customer support > recover type your imei let it update once finished power up phone now

Related

[Q] Need Help bricked LG Optimus T....

Is there anyway to turn on usb debugging on a bricked lg optimus t ???
Found that on one forum
-> My Optimus T did the same thing when I was trying to do the official update from LG. This is what worked for me. Disconnect usb cable from phone. Pull battery. Restart computer. after computer reboots, leave battery out of phone and plug usb cable back in. Let windows install drivers. After drivers are installed, go into device manager and disable android modem. will not update if modem is enabled. It will say you have to reboot pc for changes to take effect, click no. log off pc and log back in, do not reboot. after you log back in you can get the software updater from LG and it will reflash your phone. Worked for me anyways. I thought my phone was bricked, but this saved me.
or see that youtube video
http://www.youtube.com/watch?v=CKiKzNbgi9A

[Q] Bricked SU870

Hi guys
i think i bricked my su870
as of now, if i connect it to a charger or press the power on button, it will only bootloop
LG logo appears then it restarted back
i tried to revive it by using the wkpark boot, but apparently my windows 8.1 cant even detect my phone as omap (i've removed the battery.also tried to plug the usb cable directly and even tried connect it while holding Vol + )
it just said Unknown USB Device (Device Failed Enumeration) in device manager and windows keep on connect/disconnecting it.tried to right click on it and update the driver.pointed it to the OMAP folder,but it just straight away said latest driver has been installed
try another cable and windows doesnt even detect the phone at all
any idea how do i revive this phone ?
thanks

Sony Xperia C C2305 Boot Break

Only Red Led Blinks When Connected To USB Or Charging , WHSHUA Tool Also Doesnt Detect The Phone . Please Help I Shown My Phone To Mobile Repair Shop They Told Me You Have Boot Breaked The Phone . Help Me To Solve This ?
please help us
i have the same problem guys and i've tried every possible way in this forum
please let us know what youve done on your phone before this things happen.
you have to force your pc to install your phones driver so wmshua can detect your phone.
try to connect your phone to computer via usb cable without backcover then hold the power and volume down, while holding press reset button of your xperia c, don't release the power and volume just wait to your computer response, if you see installing driver then that's your lucky day if not try it again.
and one last thing you can try to turnoff your phone by holding power/volume+/voume- for couple of seconds, when you successfully turn your phone off try to connect the use cable to the computer first then while connecting to your phone hold power and volume- and wait if your pc install the driver.
hope this may help you guys.

Nexus 5 Hard brick

Have one Nexus 5 with "no command " showing on screen so i tried to flash it with Nexus root toolkit, phone froze and after that its dead and when i try to plug it on comp i just get USB composite device with yellow triangle in device manager. Phone is currently dead , not able to enter download mode, no bootloader mode, not showing anything on charger and not turning on.
Any ideas or suggestions please.
Try to update drivers from device manager if its showing a triangle when u connect ur phone! and install [pda net drivers ..
try this method it worked for me! while connecting to charger not on pc or lappy wall charger press Vol+ and Vol- and power button at the same time and connect it to the charger!!
pranavmali said:
Try to update drivers from device manager if its showing a triangle when u connect ur phone! and install [pda net drivers ..
try this method it worked for me! while connecting to charger not on pc or lappy wall charger press Vol+ and Vol- and power button at the same time and connect it to the charger!!
Click to expand...
Click to collapse
Thanks for the reply but the phone does not turn on no matter how i try to connect it and pda net driver need the phone to has enabled USB debugging which i can not do on a dead phone
Try removing battery from the back just the connector and plug it to ur PC don't attach the battery!

LG L bello bricked,whenever connected to pc just connecting and disconnecting

well yeah i screwed up.i was trying to install a rom for my lg l bello.
in recovery mode i just cleaned the dalvik cache and suddenly my phone goes off.
i tried pressing the power and power+volume button.no responding from the phone:crying:
no lg logo,no vibrating just dead so i connect my phone to the pc and it just connect and dissconnect.first i thought its the pc driver problem.but no.i updated every drivers.also connect to a another pc.still the same problem.then i change the USB Cable:silly: still just connecting and disconnecting from the pc.
plz can someone help me....(sorry for my english.i am not good at english)
promitheus said:
well yeah i screwed up.i was trying to install a rom for my lg l bello.
in recovery mode i just cleaned the dalvik cache and suddenly my phone goes off.
i tried pressing the power and power+volume button.no responding from the phone:crying:
no lg logo,no vibrating just dead so i connect my phone to the pc and it just connect and dissconnect.first i thought its the pc driver problem.but no.i updated every drivers.also connect to a another pc.still the same problem.then i change the USB Cable:silly: still just connecting and disconnecting from the pc.
plz can someone help me....(sorry for my english.i am not good at english)
Click to expand...
Click to collapse
I am in the same situation. I can only enter fastboot mode.

Categories

Resources