Hi guys,
Can someone be kind enough to share the USB driver for Optimus 3D please...If I am not mistaken, it is included in the internal SDCARD of the phone. My phone has gone into a loop of displaying Vodafone and cannot even get into the android lock screen.I tried to hard reset it (holding down Vol-Down+Home then Power) but no luck.
I think this needs to be flashed but if I can install the USB Driver for windows then apply a software update, it might work. I tried to install the USB driver for Optimus 2x but LG Mobile Support Tool cannot recognize the O3D when I connect it to the USB port.
do you have a retail brand vodafone unit? ask directly to LG
Nope.It's a prototype model.
Use the 990 driver(s)...It's Optimus 2X but works fine.
What are you going to flash it with?
Thanks guys.I managed to bring it back to life again with the hardware reset.
Related
Is there anyway to turn on usb debugging on a bricked lg optimus t ???
Found that on one forum
-> My Optimus T did the same thing when I was trying to do the official update from LG. This is what worked for me. Disconnect usb cable from phone. Pull battery. Restart computer. after computer reboots, leave battery out of phone and plug usb cable back in. Let windows install drivers. After drivers are installed, go into device manager and disable android modem. will not update if modem is enabled. It will say you have to reboot pc for changes to take effect, click no. log off pc and log back in, do not reboot. after you log back in you can get the software updater from LG and it will reflash your phone. Worked for me anyways. I thought my phone was bricked, but this saved me.
or see that youtube video
http://www.youtube.com/watch?v=CKiKzNbgi9A
I tried to do update my 2x Optimus with lg pc suite IV, but during the update my computer restart.
Now my lg pc suite iv dont recognize my phone model and on phone screen appears S/W Upgrade Please wait while upgrading...
i dont have a backup
no one knows ?
i can't connect my lg optimus su760 to lg flashtool. i already change port but not appears to be ready. any help. im stuck at lg logo
First uninstall all the drivers and reinstall the (right drivers not any version u need the version in the lg flash tool thread) and reboot the computer and try a different cable and set the compatibility to windows xp for lg flash tool
sent from my lg-p920 powered with xbsall's finest work
i manage to flash it using kd_fw_upd.exe i downloaded stock v30b_00.kdz thanks by the way.. my phone is revived again..
bartdotnet said:
i can't connect my lg optimus su760 to lg flashtool. i already change port but not appears to be ready. any help. im stuck at lg logo
Click to expand...
Click to collapse
What is your OS ?
You should run with WinXP SP3 compatibility mode...
i already done it to xp and win7 but still no success. but it's ok i already flashed it using kd_fw_upd.exe
Hello everybody,
I send my new phone to repair, so i take my old LG Optimus 3D (P920) from drawer
When i power on the phone, i see a message about no space in internal memory.
I search this web, because i have some experiences with modding android from Wildfire S, and I found some news about using ICS on P920 device.
First tutorial which i tried is some tutorial for noobs in Android Development Section.
Drivers successfully installed and LG Flash Tool start flashing, but it stuck on EBL writing start.
I tried many times on different PCs, but same result
After that i wanna try rebrick with Omap4boot tool, but P920 cannot connect as OMAP4430 devices.
No devices appearing in devmgmt, while connect my phone to USB port with volume up pressed.
Only windows show: USB device not recognized message in tray zone.
This message shows periodically while phone is connected.
Now i cant connect phone to the PC in download mode.
Only thing it works is recovery, but i cant mount USB storage.
Is my phone totally dead now?
Thank you.
jakub.josef said:
Hello everybody,
I send my new phone to repair, so i take my old LG Optimus 3D (P920) from drawer
When i power on the phone, i see a message about no space in internal memory.
I search this web, because i have some experiences with modding android from Wildfire S, and I found some news about using ICS on P920 device.
First tutorial which i tried is some tutorial for noobs in Android Development Section.
Drivers successfully installed and LG Flash Tool start flashing, but it stuck on EBL writing start.
I tried many times on different PCs, but same result
After that i wanna try rebrick with Omap4boot tool, but P920 cannot connect as OMAP4430 devices.
No devices appearing in devmgmt, while connect my phone to USB port with volume up pressed.
Only windows show: USB device not recognized message in tray zone.
This message shows periodically while phone is connected.
Now i cant connect phone to the PC in download mode.
Only thing it works is recovery, but i cant mount USB storage.
Is my phone totally dead now?
Thank you.
Click to expand...
Click to collapse
Did you try different pcs (windows 7, windows xp, windows 8), different usb cables? Can your phone boot into fastboot mode? Did you try to install omap drivers in device manager after unplugging the device?
Check out this thread too http://forum.xda-developers.com/showthread.php?t=2246001
Hi guys
i think i bricked my su870
as of now, if i connect it to a charger or press the power on button, it will only bootloop
LG logo appears then it restarted back
i tried to revive it by using the wkpark boot, but apparently my windows 8.1 cant even detect my phone as omap (i've removed the battery.also tried to plug the usb cable directly and even tried connect it while holding Vol + )
it just said Unknown USB Device (Device Failed Enumeration) in device manager and windows keep on connect/disconnecting it.tried to right click on it and update the driver.pointed it to the OMAP folder,but it just straight away said latest driver has been installed
try another cable and windows doesnt even detect the phone at all
any idea how do i revive this phone ?
thanks