Database Info

[Flash SBF] OFFICIAL RELEASE | Android Froyo 2.2.2 [UK]

System version :
Version.34.177.3MB525.Retail.en.GB
APflex version :
GAS_EMEA_USAJRDNFRYORTGB_P019
Build number :
JOREM_U3_3.4.2_177-3
Android version
2.2.2
Full SBF :
http://www.mediafire.com/?op47dv8yo8iypj1
rachit2588 said:
ok uploading will update the links here
Here is the full official UK rom http://www.multiupload.com/GK4V4ICBIK
No problems with haptic feedback, all working fine.
Flash via rsd lite ...but before that do complete factory wipe / erase data /cache etc etc
Here is the nandroid and fixed sbf :: http://www.multiupload.com/YZTSVZ2OJ3
first restore the nandroid via Custom Recovery and flash the fixed sbf.. as usual procedures
Click to expand...
Click to collapse

Yay! Thanks.

Ah, magnificent. Thanks.
Sent from my GT-I9100 using XDA Premium App

Good job, thanks so much.
I was sick I let it through my fingers when I updated!

Thank you, I have been waiting for this ;0)

the file in the archive is dated 14.04.2011... it's genuine GB SBF?
anyway, thanks!

Downloaded this file by MSU
it's genuine GB SBF

Hi,
I have run Recuva over my file system. I could not recover the sbf, but the file name, modified time and size were found.
They match perfectly the file I downloaded from mpieq.
Cheers, as far as I'm concerned that is the real thing.
Olly

Works great! Thanks very much.
Now then... who is going to produce a theme so it looks like leaked / 2.3.3 that wouldnt work with the unfortunate green camera devices?
Andy

Was on early 2.2.1 - wanted to upgrade in case of warranty issues.
Flashed with RSD Lite. New Red Motorola logo with white rings when phone starts, but had to pull battery and re-boot manually.
Phone is upgraded with all contacts, settings etc as before.
Just had to root phone with superoneclick to get Titanium back-up and SetVSL running.
30 mins start to finish. Many thanks

NickAJ said:
30 mins start to finish. Many thanks
Click to expand...
Click to collapse
You're luck. After upgrade mine boot up but with all settings and apps restored, however it after rooting it wasn't stable. Got to do factory reset and... for a first time used TiBu to restore my apps - works flawlessly . The only issue was the lack of Polish Swype (got it with Eclair) but used the one from CEE ROM and it works flawlessly.

mine simply has lost his Haptic Feedback... it must be restarted to gain his capabilities restored. is losing also his WiFi (with error message in wifi and network settings) and the data connection...
any ideas? could be from the JuiceDefender wrong resources management?

I am on motorola defy with formware version 2.51.1. If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Does it have blur is without Blur, I ma looking for something without Blur.

With Blur or without Blur?
Sent from my Toilet using Motorola DEFY.

I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.

croxley said:
I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Click to expand...
Click to collapse
This ROM is blurred. I flashed it over 2.2.1 (the UK 3.4.3-11 ROM), which I had previously successfully rooted via SOC (in fact, an older version, from months ago), but, as, at first, for strict test purposes, I decided not to wipe anything at all after flashing this ROM, the root condition (just like all my applications and settings) was kept as it was before. My Defy is in this very state ever since.
By the way, I haven't noticed differences between the two ROMs.
Just my 2 cents...
Regards,
Carlos

i have installed the full sbf
no problems with haptic feedback.
all looks fine and smooth..blur is also working nice ..even you can skip the setup.
just the 3g gets stucks up when the phone is idle..(the "H" is shown but the arrows ↑↓ are greyed out ..i have to reconfigure the apn and set it again to get it working.
Guys ne thoughts on this 3g problem..?? i have used defy baseband to switch my baseband for india.
EDIT :: solved the problems....i think this is problem free blur rom so far ...!! kudos to motorola uk..!!
note :: i didnt download from any links given here..i had some other source.

Their is some problem with the link? I have tried to download 3 times, but corrupt file...

If I wanted to go from the Korean 177 base sbf with cm7 rc1 installed to this what would be the procedure? Is it as simple as doing it through rsdlite or through the 2nd init recovery?
Thanks
Sent from my MB525 using XDA App

ifu said:
Their is some problem with the link? I have tried to download 3 times, but corrupt file...
Click to expand...
Click to collapse
Should i upload nandroid / full sbf for you..??

Really messed up G2X

Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3

beast6228 said:
Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3
Click to expand...
Click to collapse
You are probably going to have use Xboarders ROM then flash the unroot.zip he has in this thread http://forum.xda-developers.com/showthread.php?t=1158513.
See if that works to get you back to 2.3.3 completely stock.

It says that because it checks the baseband to see how recent it was, that's why it thinks you're on v21e.
As of now, there's no way to flash back to the old baseband, since people don't include the baseband in their ROMs, as that can cause a whole host of problems. The solution is to do exactly what tidewaterns said, that just gives you a little extra background info.

I am going to give this a try and see what happens, I will post results.

Well I tried the slimmed down version of Xboarders's rom and it seems to be working well so far. I originally installed his Stock OTA rom and that's when I started having problems. Oh well. thanks guys for all the help.

Crash course about root and roms: Superoneclick roots the rom you have in place. Flashing xboarders rom didn't "give you root" for the other roms you flashed, it is simply one rom out of many that is pre-rooted by the dev who packaged it up. When you flash it you have a rom that is rooted. If you had flashed CM7 (another rom that provides root access to its system files) then you'd have had a different rom that was pre-rooted by its dev.
Are you catching what I'm saying? Flashing xboarders rom didn't "give you root" any more than CM7 "gave you root." Root is built in to those roms.
If you want to restore to an unrooted stock rom browse the threads in the development section. There are a couple of stock nandroid backups posted that you can restore via clockworkmod recovery and then you'll have a stock unrooted rom. You can even do that and still have clockworkmod recovery in case you want to flash a different rom to your phone again.
And PLEASE remember when flashing from one rom to a different rom, WIPE WIPE WIPE data, cache, dalvik cache, then flash rom, then fix permissions, then reboot. This will save you SO MANY headaches.
G2X CM7

I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.

beast6228 said:
I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.
Click to expand...
Click to collapse
Sweet! If you're simply updating to a newer version of the same rom you can probably get away with just wiping cache and dalvik cache and then flashing. Its just when you switch to a totally different rom that you need to do a full wipe. Gives you a clean slate to start with.
G2X CM7

I'm curious about one thing though. What would I accomplish by using Nandroid and flashing a bin? I see there is a BIN_LGP999AT-01-V10f-310-260-MAR-27-2011+0.zip file that is available for this phone, although I have no clue on how to install Nandroid. Anyways, wouldn't flashing a BIN be the ultimate way to restore the G2X?

[Q] New Superoneclick 2.2

http://forum.xda-developers.com/showthread.php?t=803682
Has anybody tried this on UCKK! leak? For me it doesn't work.

I have tried it a bunch of times and could not get it to work. Others have reported that it works with KK1 and other leaks but I have not been able to. I had to use the old method of rooting which involves flashing a root enabling kernel then flashing back to the stock kernel (which I do for HDMI).

Zaven777 said:
http://forum.xda-developers.com/showthread.php?t=803682
Has anybody tried this on UCKK! leak? For me it doesn't work.
Click to expand...
Click to collapse
Working perfectly for me. Took a while, but yes it does root the new kk1 leak.
Just reinstall unrooted leak and rerooted with Superoneclick 2.2. It takes about 3-5 minutes.
But I haven't bee able to install a modded recovery unless I push a different kernel.

After trying many times I found the right way to root. I also was unable to install modded rrecovery and every time I hav to flash another kernel and then go back to stock

Verison 1.8
whats the difference between this and v 1.8?

This worked for me. I just ran it like normal -- didn't have to do anything special. It looked like it didn't work because with previous ROMs I would get a message stating the root was successful, but didn't get it with this one. I thought it was hung because the window said "not responding" so I force closed it, opened it again and ran it again and it said the phone was already rooted. I looked and found SU was installed. Been working great ever since.

Truckerglenn said:
Working perfectly for me. Took a while, but yes it does root the new kk1 leak.
Just reinstall unrooted leak and rerooted with Superoneclick 2.2. It takes about 3-5 minutes.
But I haven't bee able to install a modded recovery unless I push a different kernel.
Click to expand...
Click to collapse
I'm new so may be wrong but don't you need modded recovery for cwm zips? So if you need to push a different [rooted?] kernel what is the point of the new soc since the root stays after pushing rooted kernel, assuming you want a modded recovery?
Sent from my SAMSUNG-SGH-I997 using XDA App

Gotta start somewhere.
Cranky...

Woo hoo !
Sent from my SAMSUNG-SGH-I997 using XDA App

Accessing Toolbox via Term? And GB 2.3 Q's

Okay ... Don't laugh at me !! Have had the Charge since release date. This whole time I have been running stock rooted EE4 with CWM Voodoo Lagfix. I had to have a replacement phone sent to me as my CDMA radio died. Phone still worked on LTE radio. CDMA would be intermittent at best.
On to my question. I am planning to give GB a try and I am reading in threads about the toolbox and to access it via Term? I am assuming term is terminal function. This part is entirely new to me. Could someone point me to some term primers so I can research this?
Also, I have downloaded and extracted my Bloated_EG2__Gingerbread_ ODIN. Then I have
GummyCharged_GBE_2.0
GummyChargedGBE2.1
CWM_Recovery4008
I am assuming the EG2 includes CWM. If not, which will be easy enough to find out when I go to enter recovery, I will install the CWM I have downloaded. From what it appears to me, GBE_2.1 is an update to GBE_2.0 .... Thus I assume I need to install 2.0 followed by 2.1
Does this include voodoo lagfix? Or is that not needed when I up the phone to GB 2.3?
Just trying to sort this out and be informed before I start flashing this thing. The phone is stock out of the box EE4 as of right now.
Any help will be greatly appreciated.
Thanx In Advance,
Steve

Chopstix9 said:
Okay ... Don't laugh at me !! Have had the Charge since release date. This whole time I have been running stock rooted EE4 with CWM Voodoo Lagfix. I had to have a replacement phone sent to me as my CDMA radio died. Phone still worked on LTE radio. CDMA would be intermittent at best.
On to my question. I am planning to give GB a try and I am reading in threads about the toolbox and to access it via Term? I am assuming term is terminal function. This part is entirely new to me. Could someone point me to some term primers so I can research this?
Also, I have downloaded and extracted my Bloated_EG2__Gingerbread_ ODIN. Then I have
GummyCharged_GBE_2.0
GummyChargedGBE2.1
CWM_Recovery4008
I am assuming the EG2 includes CWM. If not, which will be easy enough to find out when I go to enter recovery, I will install the CWM I have downloaded. From what it appears to me, GBE_2.1 is an update to GBE_2.0 .... Thus I assume I need to install 2.0 followed by 2.1
Does this include voodoo lagfix? Or is that not needed when I up the phone to GB 2.3?
Just trying to sort this out and be informed before I start flashing this thing. The phone is stock out of the box EE4 as of right now.
Any help will be greatly appreciated.
Thanx In Advance,
Steve
Click to expand...
Click to collapse
EG2 is really old, you may want to go with a more recent GB leak like EP1Q/EP1W/EP3H... second no rom packages include CWM but are for the most part all rooted, CWM you will have to install with Odin after the rom then flash Gummy 2.0 and the 2.1 patch with a bootup between each rom flash to make sure it worked properly
edit: probably should've answered more questions Gummy 2.0 has a kernel with voodoo lagfix so it will enable after flashing the rom on first bootup, also the command terminal is fairly straightforward to use, I think the Gummy rom threads have a how-to in the OP on basic terminal commands... also as for your radio not working, it was probably a 4G sim issue as the CDMA and LTE radios are both controlled by the sim so if one doesn't work the other won't either, there may just not be as strong a CDMA signal so it seemed like it wasn't working

Great info thanx .... now when I go to update to 2.0, from the reading and even watching the video, I am going to delete all caches prior to flashing the 2.0 ... with the 2.1 just being a patch, can I just install it after verifying 2.0 works? Or should I delete the big 3 again before that one?

Chopstix9 said:
Great info thanx .... now when I go to update to 2.0, from the reading and even watching the video, I am going to delete all caches prior to flashing the 2.0 ... with the 2.1 just being a patch, can I just install it after verifying 2.0 works? Or should I delete the big 3 again before that one?
Click to expand...
Click to collapse
just cache and dalvik I think (might not even need that but I'd probably do it to be safe), don't delete data or it will wipe Gummy off and you'll have to reflash

[Q] Superoneclick issues samsung infuse

Ive had my samsung infuse rooted and something happened? had to reboot back to stock... superoneclick seems to get stuck and not root my phone!! does it not work anymore? even when i download it from shortfuse... Ive dissabled usb debug....ive enabled usb debug....nothing works help

yeah I had the same issue with super one click on stock stock from GTG's unbrick
you may want to update to UCKE5/one or two builds above the stock build.

thanks how do i get this? from where? I cannot seem to get my cwm to open in the red!

you could probably just run this in odin to get back to UCKE3 which was stock in North America if you bought the phone a month after it came out. (Was stock for my phone when I bought it a month after it came out anyway).
http://forum.xda-developers.com/showthread.php?t=1112555
This has the bonus of already being rooted btw.
Anyway, UCKD5 is the rom that doesn't work with superoneclick properly from what I can tell which was stock when it came out and is GTG's ultimate unbricker's rom.
Don't use the pit because you most likely won't need it (your phone boots and all that stuff, right. If so, don't bother with repartitioning)
From here you're rooted and can setup modified 3E with root explorer and CWM with whatever you wanna use to set it up.

I used "[ODIN][UCKD5] Odin - Stock (100% or Root+3e)" (from Super Thread) to get to stock.
Then went to market and loaded SGS Kernel Flasher.
Then I downloaded Infused GB Core A2 kernel.
After I flashed the kernel, I had red CWM and went from there. Worked really well!

issues still
Download? How? Multiupload no good! mega no good either

They've been mirrored. I think. Not near pc.. No mirrors from me.
Sent from my SAMSUNG-SGH-I997 using Tapatalk