Related
I notice alot of users say they cant flash their rom when their device isnt at 100% yet. why is that?
cheers.
its just best to do it w/ 100% battery. That way you can test the battery drain w/ that ROM.
P1Tater said:
its just best to do it w/ 100% battery. That way you can test the battery drain w/ that ROM.
Click to expand...
Click to collapse
Why cant i test it after i flash it with 50% and charge it to 100%?
Imperium said:
Why cant i test it after i flash it with 50% and charge it to 100%?
Click to expand...
Click to collapse
It's yours so you can do anything you like with your brick. er Phone.
Imperium said:
I notice alot of users say they cant flash their rom when their device isnt at 100% yet. why is that?
cheers.
Click to expand...
Click to collapse
It's not a problem when you flash your Kaiser without a full battery, as long it's not under 50%.
ROM update will simply not start if battery level is below 50%.
It is not that i will do it. its just that i am curious why it is required.
sleeping said:
It's yours so you can do anything you like with your brick. er Phone.
Click to expand...
Click to collapse
This has nothing to do with bricking your PDA.
Imperium said:
It is not that i will do it. its just that i am curious why it is required.
Click to expand...
Click to collapse
It's required just to be safe. You could probably flash with a 2% battery level, but to be sure that cannot be a problem, the build this protection into the ROM update application.
well its plugged in while flashing so isnt it getting power from the pc already? why does it matter what the battery is at?
It's called better safe than sorry. If you lose power in the middle of a ROM upgrade you will quite possibly brick the phone. Therefore, it's just to HELP you be on the safe side.
djskaw said:
well its plugged in while flashing so isnt it getting power from the pc already? why does it matter what the battery is at?
Click to expand...
Click to collapse
and what if U set 'do not charge the battery when connected to PC' ?
In fact i am not sure if this setting is used while flashing, but it's possile
Hi there!
I have a Galaxy Tab 7 and I am a noob on this development stufs.
I am trying to install this version on it:
cafe-ti.blog.br/1835~samsung-galaxy-tab-7-gt-p1000-android-jelly-bean-cm10
And looks like the language is pretty simple but I have no clue how to do it...I mean, I trie using Odin..did not work...
I tried this instead:
[wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(P1000L):_Full_Update_Guide
but the Recovery mode does not work!
There is any step by step non expert language tutorial to how let the Tab 7" with the CM10?
Thanks from Brazil
Rafael
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
orangekid said:
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
Click to expand...
Click to collapse
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
rafapiloto195 said:
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
Click to expand...
Click to collapse
I tried this video, passin to 2.3.6 first, using Odin..
youtube.com/watch?v=fXDvq5SaA70&feature=relmfu
workd well, however, after flashing, is not turning on again...
What may can be?
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
orangekid said:
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
Click to expand...
Click to collapse
There is no sign...does not even turn on...
black screen only..nothing...
rafapiloto195 said:
There is no sign...does not even turn on...
black screen only..nothing...
Click to expand...
Click to collapse
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
orangekid said:
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
Click to expand...
Click to collapse
I had to come to work and let it at home...
Well, as berfore flash it I let the USB on the debugging, I will track the oneclick root directly to se if at least will get a conecction with a computer;
I will try to send it to the dealer as well.
I believe as I let it on the 2.3.6, wich is the same one running on Kies, still under warranty to perform a hard brick recovery.
Let's see.
Thanks..I'll keep you guys posted.
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
orangekid said:
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
Click to expand...
Click to collapse
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
rafapiloto195 said:
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
Click to expand...
Click to collapse
Well, looks like it is working again,
however, when I try to turn on on the recovery mode to wipe data,
it shows E: MBR Checksum error
Internal MMC checksum verify failed.
Any ideas?
great idea
+1 orangekid
asdera-and said:
+1 orangekid
Click to expand...
Click to collapse
Ok! Is on the 2.3.3 now.
I want to put the Cyanogen 4.1.1 as described here:
http://forum.xda-developers.com/showthread.php?t=1871113
However, when I tried it shows me the error I mentioned above and also
Failed to verify whole-file signature...
Then , I was able to come to CMW where I should install the Cyanoi 4.1.1 however keeps showing me the error:
E: Can't moun /emmc/
Ideas?
OK
now I tried this room:
Rom: Overcome + Overcome Kernel
Following the guide step by step and then the E: looks like to be damaged. I can not even turn it on again.
Just when I put it to charge, it will show the brick scree (the fone and the computer)...
I am almost givin up...
Does your tab have an SD card in it?
If so try a different one, if not odin 100% stock, then do the root, and ROM flash again.
So is it possible to install custom rom or stock rom android 4.4 WHITOUT usb cable?
viljami323 said:
So is it possible to install custom rom or stock rom android 4.4 WHITOUT usb cable?
Click to expand...
Click to collapse
You mean without using a computer? What happened to your phone that you need to install a rom (Without usb cable?!)
LS.xD said:
You mean without using a computer? What happened to your phone that you need to install a rom (Without USB cable?!)
Click to expand...
Click to collapse
yes no computer cable! My phone wont recognize my PC if i plug it in via USB nothing happens. so i think its software bug
viljami323 said:
yes no computer cable! My phone wont recognize my PC if i plug it in via USB nothing happens. so i think its software bug
Click to expand...
Click to collapse
Is your phone working and running stock 4.4 firmware?
LS.xD said:
Is your phone working and running stock 4.4 firmware?
Click to expand...
Click to collapse
it has offical lg g3 5.0 but i want to go back to 4.4
viljami323 said:
it has offical lg g3 5.0 but i want to go back to 4.4
Click to expand...
Click to collapse
Have you tried another cable or another computer yet?
LS.xD said:
Have you tried another cable or another computer yet?
Click to expand...
Click to collapse
yes i have no help
viljami323 said:
yes i have no help
Click to expand...
Click to collapse
Before you start any actions to modify the phone, you should get it repaired by the vendor. Its not even a year since the model was released, so you should have still guarantee on it.
LS.xD said:
Before you start any actions to modify the phone, you should get it repaired by the vendor. Its not even a year since the model was released, so you should have still guarantee on it.
Click to expand...
Click to collapse
bu i am asking you my friend! is it possible to install ROM to me somehow . but still thanks
viljami323 said:
bu i am asking you my friend! is it possible to install ROM to me somehow . but still thanks
Click to expand...
Click to collapse
Bump! unlock your bootloader, then you will be able flashing roms via recovery. BUT its really risky if your phone has no working USB port as you cant flash the stock firware if something goes wrong.
LS.xD said:
Bump! unlock your bootloader, then you will be able flashing roms via recovery. BUT its really risky if your phone has no working USB port as you cant flash the stock firware if something goes wrong.
Click to expand...
Click to collapse
oh **** , you know what? Everything seems to bee good and perfect but i need to bee ROOTED first!
i have heard about those one click root do you know any working ones for andorid 5.0
Hi,i will make a Custom Rom for the X2.
After flashing this Rom,my X2 will not Boot,no Recovery,nothing.
The Display remains black
The Ledlight when charging also no longer works.
I think i have a Hardbrick.aahh
Good by X2
letschky said:
Hi,i will make a Custom Rom for the X2.
After flashing this Rom,my X2 will not Boot,no Recovery,nothing.
The Display remains black
The Ledlight when charging also no longer works.
I think i have a Hardbrick.aahh
Good by X2
Click to expand...
Click to collapse
I don't know if this will work for you but I thought I would throw it out there... I had my phone plugged in to my computer's usb 3.0.... I then decided to plugged it into one of my computers usb2.0 and the phone started responding to my holding in the volume and power buttons... What I did was put a dload folder with the UPDATE.APP on my sd card.... I believe it was the original B013... The phone went into a EMUI recovery mode after a few reboots and automatically started the recovery... Before this it was trying to do a online recovery and failed... All's working great for me now.
Steamer2499 said:
I don't know if this will work for you but I thought I would throw it out there... I had my phone plugged in to my computer's usb 3.0.... I then decided to plugged it into one of my computers usb2.0 and the phone started responding to my holding in the volume and power buttons... What I did was put a dload folder with the UPDATE.APP on my sd card.... I believe it was the original B013... The phone went into a EMUI recovery mode after a few reboots and automatically started the recovery... Before this it was trying to do a online recovery and failed... All's working great for me now.
Click to expand...
Click to collapse
Have you make and Flash a own Custom Rom?
letschky said:
Have you make and Flash a own Custom Rom?
Click to expand...
Click to collapse
No... but I flashed "X2-B015-Kangvip" custom rom and it's running good...
Steamer2499 said:
No... but I flashed "X2-B015-Kangvip" custom rom and it's running good...
Click to expand...
Click to collapse
the X2 is dead,no Boot,Bootloader,no Recovery,nothing.
Steamer2499 said:
No... but I flashed "X2-B015-Kangvip" custom rom and it's running good...
Click to expand...
Click to collapse
HELLO ,
is it possible to upload the X2-B015-Kangvip custom rom because i don't understand the Chinese language because you have to register to download it
Thanks
eman2001 said:
HELLO ,
is it possible to upload the X2-B015-Kangvip custom rom because i don't understand the Chinese language because you have to register to download it
Thanks
Click to expand...
Click to collapse
Try this... "https://yadi.sk/d/5YI63uiAhz5UD/Rom/Custom/KangVip"..... You will have to register but it's free
Steamer2499 said:
Try this... "https://yadi.sk/d/5YI63uiAhz5UD/Rom/Custom/KangVip"..... You will have to register but it's free
Click to expand...
Click to collapse
Thankyou so much for the link i have now downloaded the rom
eman2001 said:
Thankyou so much for the link i have now downloaded the rom
Click to expand...
Click to collapse
You welcome...
letschky said:
Hi,i will make a Custom Rom for the X2.
After flashing this Rom,my X2 will not Boot,no Recovery,nothing.
The Display remains black
The Ledlight when charging also no longer works.
I think i have a Hardbrick.aahh
Good by X2
Click to expand...
Click to collapse
Welcome X2
OK friends I bought a new X2.
I hope it holds now longer.
Disclaimer
I'm am not responsible for bricked devices, flashing custom ROM's/Recovery's is done so at YOUR OWN RISK!
Download
lineage-14.1-20180620-UNOFFICIAL-p839v55.zip
Installation
I recommend doing a full wipe before flashing!
Flash ROM using TWRP
Flash GAPPS 7.1 arm package of your choice
Reboot & wait for Android to boot
For root access flash the addonsu-14.1-arm-signed.zip available from https://download.lineageos.org/extras
Version Information
Status Beta
ROM OS 7.1.2 Nougat
ROM Kernel 3.10.107
Created 2017-11-15
Updated 2018-06-20
Thanks goes out to @wbrambley for his involvement in testing & helping to solve / fix bugs!
Many thanks
Thank you for this rom. Everything about it works perfect. Thank you for all your effort
Great Job
Perfect work. It works awesome but i can not share my connection with any method. Hotspot and usb teethering not working for me.
Thisgra said:
Perfect work. It works awesome but i can not share my connection with any method. Hotspot and usb teethering not working for me.
Click to expand...
Click to collapse
I confirm that hotspot doesn't work
Thisgra said:
Perfect work. It works awesome but i can not share my connection with any method. Hotspot and usb teethering not working for me.
Click to expand...
Click to collapse
acidhell said:
I confirm that hotspot doesn't work
Click to expand...
Click to collapse
Flash this from TWRP :
https://mega.nz/#!LUhSSKBZ!IjobJ6waRKhucXyQ-0k16vzucylEVv4c517BuKm5reo
MAKE SURE YOU SELECT "BOOT" NOT "RECOVERY" !!!!
wbrambley said:
Flash this from TWRP :
https://mega.nz/#!LUhSSKBZ!IjobJ6waRKhucXyQ-0k16vzucylEVv4c517BuKm5reo
MAKE SURE YOU SELECT "BOOT" NOT "RECOVERY" !!!!
Click to expand...
Click to collapse
Now wifi hotspot works ?
What do you mean by select boot not recovery? I'm newbee on flashing, sorry.
Thisgra said:
What do you mean by select boot not recovery? I'm newbee on flashing, sorry.
Click to expand...
Click to collapse
If your still running lineage 14.1 (otherwise flash again 1st) then in twrp go to install & on the bottom right select "install image" then select the IMG file wbrambley posted, it will give you 2 options boot or recovery, make sure you select boot then continue otherwise it will wipe twrp if you choose recovery. Once completed just reboot.
nutsda said:
If your still running lineage 14.1 (otherwise flash again 1st) then in twrp go to install & on the bottom right select "install image" then select the IMG file wbrambley posted, it will give you 2 options boot or recovery, make sure you select boot then continue otherwise it will wipe twrp if you choose recovery. Once completed just reboot.
Click to expand...
Click to collapse
It solved the teethering problem thanks. But I have echo on calls. When someone calls me or i call, my friend hears itself. Can you do anything for this? Thank you. Perfect ROM. I wanna use this if you solve the echo problem
New build up https://www.mediafire.com/file/l0x80zppjc1bxl8/lineage-14.1-20171124_055430-UNOFFICIAL-p839v55.zip
Fix tethering
possible fix for in-call sound echo
OpenGL updated to 3.2 - thanks to @wbrambley
nutsda said:
New build up https://www.mediafire.com/file/l0x80zppjc1bxl8/lineage-14.1-20171124_055430-UNOFFICIAL-p839v55.zip
Fix tethering
possible fix for in-call sound echo
OpenGL updated to 3.2 - thanks to @wbrambley
Click to expand...
Click to collapse
Still echo on calls
any update, fix or help?
Thisgra said:
any update, fix or help?
Click to expand...
Click to collapse
I haven't had any time to look into yet so I can't help til I figure out what's going on, but I will get there.
I haven't noticed any echoes in calls. Not even once.
nutsda said:
I haven't had any time to look into yet so I can't help til I figure out what's going on, but I will get there.
Click to expand...
Click to collapse
Your answer is enough I won't rush you. Thanks
---------- Post added at 04:56 PM ---------- Previous post was at 04:54 PM ----------
acidhell said:
I haven't noticed any echoes in calls. Not even once.
Click to expand...
Click to collapse
Echo is not for the user of this rom. When i call my phone with any other phone (when smart ultra 6 is far away). I can hear the voice cleary but when i talk, I hear my voice back. Even on earphones Thats really annoying.
This OS has big problems with the battery!!! It charge only at 75 % after 12 hours of charging and.....most importantly,it doesn't stay in charge mode(the phone restarts itself over and over again,what if you remain only with 1% batery and you are caught in this loop??)
Manu18 said:
This OS has big problems with the battery!!! It charge only at 75 % after 12 hours of charging and.....most importantly,it doesn't stay in charge mode(the phone restarts itself over and over again,what if you remain only with 1% batery and you are caught in this loop??)
Click to expand...
Click to collapse
Have you at some point flashed the twrp flashable stock SU6 marshmallow from modaco?
nutsda said:
Have you at some point flashed the twrp flashable stock SU6 marshmallow from modaco?
Click to expand...
Click to collapse
yes
Manu18 said:
yes
Click to expand...
Click to collapse
That's a huge battery drain with something using nearly 100% of the CPU all the time. Your phone would be melting hot. If that's the case go into Dev options and enable view CPU usage, see what it is.
Or your charging method is really bad, USB from PC is horrible to charge these as it limits current draw to 500mA. Change leads, change charger and see if it makes a difference. My battery will hold up for 5 days with little usage.
wbrambley said:
That's a huge battery drain with something using nearly 100% of the CPU all the time. Your phone would be melting hot. If that's the case go into Dev options and enable view CPU usage, see what it is.
Or your charging method is really bad, USB from PC is horrible to charge these as it limits current draw to 500mA. Change leads, change charger and see if it makes a difference. My battery will hold up for 5 days with little usage.
Click to expand...
Click to collapse
It doesn't get realy hot,I deleted the battery files from system and I succeeded to charge it to 100% but......the notification led still lights too loud and phone charge very slow (connected to a QC2 charger) and even don't stay in charge mode(I can't charge It when it's off because try to open and shut down itself)