Related
This kernel works with on EB13 with both RFS and EXT4.
This is a PROPER release of the kernel, as it includes the new initramfs changes from EB13.
Here you are:
http://efragtv.com/android/EB13-DUALFS-KERNEL.zip
FOR DEVELOPERS:
Initramfs: http://efragtv.com/android/EB13-initramfs.zip
Thanks sir was waitin for this
Sent from my SPH-D700 using XDA App
Can confirm it's working.
Added initramfs source.
Tks
Sent from my SPH-D700 using XDA App
sorry once again for the noob questions..
but does this mean zips that are edify like a battery mod or AOSP lockscreen are flashable?
Dameon you are the man...
dmbatson said:
sorry once again for the noob questions..
but does this mean zips that are edify like a battery mod or AOSP lockscreen are flashable?
Click to expand...
Click to collapse
it means it works with cwm3
Dameon87 said:
This kernel works with on EB13 with both RFS and EXT4.
This is a PROPER release of the kernel, as it includes the new initramfs changes from EB13.
Here you are:
http://efragtv.com/android/EB13-DUALFS-KERNEL.zip
FOR DEVELOPERS:
Initramfs: http://efragtv.com/android/EB13-initramfs.zip
Click to expand...
Click to collapse
Just so I'm clear do u flash this when u do the cwm3 1 click root then flash the kernal or do u flash the kernal then do the 1 click root cwm3?
Sent from my SPH-D700 using XDA App
beyond rad!
brian2220 said:
it means it works with cwm3
Click to expand...
Click to collapse
Thanks!
cant wait for the new Quantum Rom by the Way!
Can we flash this Kernel on CWM3 & then flashed the De-oxidized pre-rooted rom?
If not, how do we make it work on EXT4?
Thanks Dameon... I can't imagine why we still want to support RFS,since you were the big backer of EXT4 in the beggining,and we have all proved it safe. Just want to see the kernel as clean as possible... And I can't wait to see you put out an OC/UV kernel.
Sent from stock EB13...
Anyone know how we use this kernel to change to ext4?
Sent from my Evo Killer!!!
musclehead84 said:
Anyone know how we use this kernel to change to ext4?
Sent from my Evo Killer!!!
Click to expand...
Click to collapse
use the one click here. http://forum.xda-developers.com/showthread.php?t=897612
this changes to ext4. this kernel just supports it with the eb13 release.
abmcbride85 said:
use the one click here. http://forum.xda-developers.com/showthread.php?t=897612
this changes to ext4. this kernel just supports it with the eb13 release.
Click to expand...
Click to collapse
So do u have to do the 1 click root v.2.5.x install the kernal then do the 1 click root cwm3? I'm just confused a bit.
Sent from my SPH-D700 using XDA App
Didn't work for me. Shows the stock "Android" logo flashing over the boot animation and then the phone freezes and keeps soft-resetting. Followed the directions to a T, guess it just doesn't like me.
Estewa_619 said:
So do u have to do the 1 click root v.2.5.x install the kernal then do the 1 click root cwm3? I'm just confused a bit.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
no use the one click root from the link i provided. it will install cwm 3 once you reboot and convert everything to ext4 automatically. then all you do is flas the kernel.
ecooce said:
Thanks Dameon... I can't imagine why we still want to support RFS,since you were the big backer of EXT4 in the beggining,and we have all proved it safe. Just want to see the kernel as clean as possible... And I can't wait to see you put out an OC/UV kernel.
Sent from stock EB13...
Click to expand...
Click to collapse
Team Viper has been using that for OC/UV
Anyone got this working on eb13 with ext4?
Sent from my Evo Killer!!!
I'll be honest, I'm not sure if it's the kernel or cm7, but the bottom line is that adding superclock 4×2 results in super laggy adw ex. I wish I would have added it prior to flashing the kernel, but who would've imagined that a widget would cause a collapse like this. Additionally, the unlock animations do not work. Fyi.
Feel free to chime in.
Your using a eclair kernel (2.1) for cm7?
Sent from my PC36100 using XDA App
wheres the download link? after all this is a DEV right??
asafegous said:
Your using a eclair kernel (2.1) for cm7?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Savaged Zen is a gb kernel dude
cordell12 said:
wheres the download link? after all this is a DEV right??
Click to expand...
Click to collapse
Download link to what? I can certainly load up catlog and post the output.
cordell12 said:
wheres the download link? after all this is a DEV right??
Click to expand...
Click to collapse
They are saying since you posted this in the dev section, they want to download whatever you are dev...
That said I run sz 2.1 on cm 7 with adw ex and have zero issues with bw.
Sent from my EVO
bwcorvus said:
They are saying since you posted this in the dev section, they want to download whatever you are dev...
That said I run sz 2.1 on cm 7 with adw ex and have zero issues with bw.
Sent from my EVO
Click to expand...
Click to collapse
What version of BW and are you using the unlock animations?
Also, I'm using the nosbc CFS more havs that wasn't done by mwielgosz
lawsonmh15 said:
What version of BW and are you using the unlock animations?
Also, I'm using the nosbc CFS more havs that wasn't done by mwielgosz
Click to expand...
Click to collapse
Bw 3.4...no unlock...and the official bfs SBC version. Maybe try the nosbc that mw does??
Sent from my Xoom using Tapatalk
Here is the discussion on that kernel where you can post your Question. They also have official forums which you ask Questions if you think the kernel is the issue.
http://forum.xda-developers.com/showthread.php?t=917755
Here is the CM7 discussion. Post here too, maybe it's CM7 related like you think it might be.
http://forum.xda-developers.com/showthread.php?t=956187
The point that people are making is that this is Android Development. Not Q&A. The Evo forums also have dedicated Q&A sections.
As to your problem, flash a different kernel? Or wipe /system and /boot and reflash CM7 + GApps to get CM7 stock kernel back and a clean CM7 install while preserving /data (as in, don't wipe data).
Edit: To the guy thinking this is Eclair kernel... the kernel version is 0.2.1. For some reason people like to call it 2.1. It's a 2.6.37 based Gingerbread kernel.
sirmx said:
Here is the discussion on that kernel where you can post your Question. They also have official forums which you ask Questions if you think the kernel is the issue.
http://forum.xda-developers.com/showthread.php?t=917755
Here is the CM7 discussion. Post here too, maybe it's CM7 related like you think it might be.
http://forum.xda-developers.com/showthread.php?t=956187
The point that people are making is that this is Android Development. Not Q&A. The Evo forums also have dedicated Q&A sections.
As to your problem, flash a different kernel? Or wipe /system and /boot and reflash CM7 + GApps to get CM7 stock kernel back and a clean CM7 install while preserving /data (as in, don't wipe data).
Edit: To the guy thinking this is Eclair kernel... the kernel version is 0.2.1. For some reason people like to call it 2.1. It's a 2.6.37 based Gingerbread kernel.
Click to expand...
Click to collapse
I can appreciate that, and I suppose I should've posted in the nosbc SZ thread. Sorry about that.
AOSP Kernels for HTC's 8x50, 7x30, and 8x60 Devices
Also available for the Motorola Xoom
Tiamat kernels are designed for use on all ROMs that are built from the AOSP source code. This includes ROMs built from MIUI, CyanogenMod, and others.
Tiamat receives no support for use with ROMs based on HTC's Sense - use at your own risk.
Click to expand...
Click to collapse
Tiamat Kernels
You can find full details about Tiamat Kernels at our website. The site is up and running and serves as a more centralized location to get updates, downloads, and changelogs for all Tiamat Kernels. There is no forum or Registration, it’s just a more convenient way to keep things organized as we work to add support for more devices.
Click to expand...
Click to collapse
Support
Join the Tiamat Kernel developers on IRC at irc.freenode.net, #tiamat. Support and questions are generally handled faster there than the forums. You can easily join via webchat here.
Click to expand...
Click to collapse
Special Thanks to:
toastcfh, slayher and the CyanogenMod team for the base kernels and everything else they do for the Android community
bcnice20 for generally being awesome
TeamWin for also generally being awesome
netarchy, chad0989, cuviper, and invisiblek for some great code
intersectRaven and redstar3894 for the Mjolnir compiler
JasonK75 for updating threads
Click to expand...
Click to collapse
Quick Links
Click to expand...
Click to collapse
8x50 Changelog
8x60 Changelog
7x30 Changelog
Downloads
FAQ
Source Code
Awesome to see u guys on sensation your all over my xoom!!
Sent from my Xoom using Tapatalk
The only issues i had now is that i flash this kernel and i wasnt able to unlock my phone. think i might wanna reflash it again .
Edit:Still the same problem. I hope i'm not the only one here.
Welcome guys. I'll be testing this kernel as well im glad your deving for our device.
Sent from my HTC Sensation 4G using Tapatalk
Hm interessting, really want to try but, can you tell us more ?
Is this kernel made for performance and it's OC ?
Or is it not OC by default and can give us better battery ? I really search a kernel for a good battery life : )
What version do I need for HTC Sensation?
Remember to give THANKS were THANKS is due.
Try to install this kernel on TripNMiUI Beta, get the bootloop
I'm sorry it would help if I would read a little more. I found right Kernel, flashing now.
Remember to give THANKS were THANKS is due.
Works fine on cm7 for me. Although battery drain seems high, will report back after a full charge discharge cycle.
Sent from my Sensation 4G
Thanks, no Problems so far, but low benchmark results.
g3c said:
Thanks, no Problems so far, but low benchmark results.
Click to expand...
Click to collapse
using what benchmark app? quadrant is laughably useless on these device. seriously, run it several times in a row -- your scores will vary wildly. That is the definition of unreliable. The app may as well be a random number generator at this point. Also, it never bothers to use the second core.
r00tk1t said:
Try to install this kernel on TripNMiUI Beta, get the bootloop
Click to expand...
Click to collapse
It's tested on CM7. The MIUI ROMs at this point (and really a shocking number of other 'AOSP' ROMs) are drawing far too heavily on Sense to work well with this kernel (or the kernel packed in CM7 for that matter).
r00tk1t said:
Try to install this kernel on TripNMiUI Beta, get the bootloop
Click to expand...
Click to collapse
damn, was hoping to use this with trip's miui and hopefully fix the bt sound issues
Hey cayniarb, love the kernel any idea what's instore for the next release? More gpu and bus oc?
Sent from my Sensation 4G
Good to see you here, cayniarb. See you on IRC.
r00tk1t said:
Try to install this kernel on TripNMiUI Beta, get the bootloop
Click to expand...
Click to collapse
Cayniarb said:
It's tested on CM7. The MIUI ROMs at this point (and really a shocking number of other 'AOSP' ROMs) are drawing far too heavily on Sense to work well with this kernel (or the kernel packed in CM7 for that matter).
Click to expand...
Click to collapse
Working just fine for me on TripNMiUI.
I used Tiamat on Evo and it worked great
Cant wait to try this out
Thanks OP!!!
Cayniarb said:
using what benchmark app? quadrant is laughably useless on these device. seriously, run it several times in a row -- your scores will vary wildly. That is the definition of unreliable. The app may as well be a random number generator at this point. Also, it never bothers to use the second core.
Click to expand...
Click to collapse
I used CF-Bench
~7500 with faux v0.1.4 @ 1.67 and cm7
~5300 with tiamat v1.0.0 @ 1.67 and cm7
Do you have other results?
turkeyshark said:
Working just fine for me on TripNMiUI.
Click to expand...
Click to collapse
does bt sound work for you? thats the big problem. pairs easy but no sound.
---------- Post added at 08:23 AM ---------- Previous post was at 08:11 AM ----------
detroit2hi said:
I used Tiamat on Evo and it worked great
Cant wait to try this out
Thanks OP!!!
Click to expand...
Click to collapse
same here! great kernals for the evo
cmart4 said:
does bt sound work for you? thats the big problem. pairs easy but no sound.
Sorry don't use bt so no idea
Click to expand...
Click to collapse
Question, most phones including the G1 came with an aosp kernel. There is no source for their GB kernel, yet they are able to make the kernel for CM7.
YES, we have the froyo kernel source. So, could we make the froyo cm6 aosp kernel and reverse it just like that of the G1's and build the CM7 kernel from it.
AOSP kernels are reversible. Build an aosp froyo kernel, reverse, rebuild for the Aosp GB kernel.
The G1 does have source =0
Edit: Nevermind, misread OP
I want CM6 FROYO.
Sent from my SGH-T959V using XDA Premium App
It is possible, only issue is I have no clue how to compile the AOSP kernel, otherwise i would have built it by now.
airfluip1 said:
It is possible, only issue is I have no clue how to compile the AOSP kernel, otherwise i would have built it by now.
Click to expand...
Click to collapse
and how do you prepose to sign it?
RaverX3X said:
and how do you prepose to sign it?
Click to expand...
Click to collapse
Dude, no idea what you mean raver, I am talking about cm6.
I am starting up my own route of android development working with team acid and AntonX to make sure all the best features work in AOSP roms like MIUI, and in the future AOSP and BML CM7 if we make them . This is a BML kernel so don't flash it if you are running the MTD CM7. It is CWM flashable or you can extract the zImage and flash with heimdall.
This is a branch of AntonX's kernel so UV/OC, voodoo sound, and BLN are all there.
Do not flash this on a stock rom, this includes Valhalla black, AOSP style (no it's not AOSP), or anything that isn't MIUI, Cyanogenmod (BML), or AOSP (if we ever get it ).
Changes to come:
Currently working with initramfs to remove voodoo lagfix, speed up boot time, and add touch recovery.
Credits:
AntonX, this is a branch of his kernel
Team Acid, for putting up with me and their kernel work
Bhundven, for being the best dev ever, his original kernel, new initramfs and all his work fixing CM7, and his always helping me out when I'm in a pinch
m4xm4n and Bhundven for the vibrate fix on CM7 ported to BML
Changelog:
Release one:
Branched from AntonX kernel. Adds vibrate functionality to AOSP
Click to expand...
Click to collapse
Release two:
Updated source base to AntonX's 1.1.0 kernel.
Disabled some debugging.
Implements new initramfs for faster boot. (Thanks Bhundven!!)
Should be faster and more stable.
Now comes in OC and non-OC flavors.
Click to expand...
Click to collapse
Downloads:
Release 1
Release 2 (non-OC) (OC/UV)
Updated non-OC version. It was the OC version a second time. Oops.
Source:
https://github.com/hampsterblade/Galaxy_S_4G_Kernel
Would this work on a ported ics ROM that isn't cm based, but is stock based (from nexus)?
Sent from my BAMF SGH-T959V!
downlaoding!
"Putting up with me"? You make us laugh with all them jokes, plus a bunch of interesting conversations. I'm glad you're on IRC so often. I'm also glad to see you develop for this phone.
thomas.raines said:
Would this work on a ported ics ROM that isn't cm based, but is stock based (from nexus)?
Sent from my BAMF SGH-T959V!
Click to expand...
Click to collapse
If it's BML it's worth a shot. Let me know if it works for you .
Just a general reminder: there is a "Thanks" button for a reason. Please do not post just to say thanks, just hit the button.
I noticed you thanked m4xm4n for the "vibrate fix on CM7 ported to BML" will this fix the miui weak vibration bug?
ChadBFlores said:
I noticed you thanked m4xm4n for the "vibrate fix on CM7 ported to BML" will this fix the miui weak vibration bug?
Click to expand...
Click to collapse
Yes read the whole op...*cough*changelog*cough*
Sent From a Galaxy S with 4G
Sad news is, my computer screwed up a flash and now I'm bricked. So I won't be deving for a while til I get to a t-mobile store
Woo think god, I managed to fix it. Lesson learned, don't flash from my front USB port.
hampsterblade said:
Sad news is, my computer screwed up a flash and now I'm bricked. So I won't be deving for a while til I get to a t-mobile store
Woo think god, I managed to fix it. Lesson learned, don't flash from my front USB port.
Click to expand...
Click to collapse
Indeed; stick with the ones mounted on the motherboard if you can
hampsterblade said:
m4xm4n for the vibrate fix on CM7 ported to BML
Click to expand...
Click to collapse
The "vibrate fix" aka the switch to aries-vibrator from vibetonz was actually bhundven. I just dinked around with vibetonz until I yelled "f**k it" and flipped over the table. Bryan then made the switch.
m4xm4n said:
The "vibrate fix" aka the switch to aries-vibrator from vibetonz was actually bhundven. I just dinked around with vibetonz until I yelled "f**k it" and flipped over the table. Bryan then made the switch.
Click to expand...
Click to collapse
Noted
OP updated with new release.
hampsterblade said:
OP updated with new release.
Click to expand...
Click to collapse
Uh oh...I think the two links are exactly the same (non OC) version
Sent from my SGH-T959V using xda premium
daothanhduy1996 said:
Uh oh...I think the two links are exactly the same (non OC) version
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
fixed.
I'm quite stupid but can you explain "OC and Non-OC flavors"
NVM I figured it out haha.
hampsterblade,
You did the wrong thing on github, you have lost all history for the project. If for any reason my project is gone, nobody will know what have been modified. You should have forked. It's not too late, you haven't made too many changes. I did exactly the same mistake originally, but FBis helped me to recover.
And why have you uploaded the whole toolchain??? You are not going to make changes to it, are you?
Since updating this kernel to the non oc version I can't uv with tegrak
Sent from my galaxy s 4g using XDA app