Database Info

[Q] Help for my Huawei Ideos U8150

Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul

Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178

hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!

YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!

[Q] What Tablet have I bought ? [ Also help with problem ! ]

Hello XDA!
I have a big issue here.
I bought a Tablet from Ebay
|
v
10" CAPACITIVE MULTI TOUCH ANDROID 4.0 TABLET PC ALL WINNER A10
http://www.ebay.com/itm/10-CAPACITIVE-MULTI-TOUCH-ANDROID-4-0-TABLET-PC-ALL-WINNER-A10?item=290721601261&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D4%26po%3DLVI%26ps%3D63%26clkid%3D9104166066624506894
When i unboxed it the manual said the name was " N500-B " But i haven't found anything about that one either.
And the info about the " About Tab " is this
Modelnumber : BC1077
Android Version : 4.0.3
Basebandversion: 0.5
Kernel Version: 3.0.8+
[email protected] #33
Version: Crane_bc1077-eng 4.0.3 IML74K 20120407 test-keys
Problem is, that i haven't found anything about this pad, nothing at all.
And yesterday i think i ****ed it up real bad.
I installed CM9 from Slatedroid
http://www.slatedroid.com/topic/33373-rom-cm9-nightlies/
With this for wifi bt etc etc : 907c_compatibility_X.X.X.zip.
And obviously it's the wrong one.
My screen looks as if it was cracked and I can't see anything, i can't even access CWM.
What pad is this?
And is it possible to fix my problem.

Why did u install a ROM not made for your device?
Desire S • Fallout V2.0.0 • xda premium

olyloh6696 said:
Why did u install a ROM not made for your device?
Desire S • Fallout V2.0.0 • xda premium
Click to expand...
Click to collapse
I thought it would work for my pad.
Cuz it said that it worked for several pads. But now the screen is really messed up haha.
Still wondering what pad I have.
I say's Hardware : Sun4i
And if it's possible to fix my pad (lol)

olivetti olipad graphos

dietoro said:
olivetti olipad graphos
Click to expand...
Click to collapse
Erhm, what?

u should be able to fix your tab by flashing original firmware using live suite.. but for that u need to find out the name of the tab.. may b you can try sending a mail to the ebay seller and see if he can help u

Just been trying to search for you tablet i think it is a clone of Protab2XXL
Try this link it has an ics image and livesuite
http://downloads.poi...28-20120412.zip
then follow these instructions
Turn the tablet completely and starts in UPDATE mode.
This may be difficult but this is the easiest way to correct in update mode to get:
- Turn the tablet completely and then wait a second or 10 for the security for when the screen is the tablet is not quite ready to close.
- Press 'Home' and 'Power', and press up 1 times the reset button with a paperclip or toothpick.
- Keep your 'Home' firmly and let the 'Power' button and press it 5 times. (As the count-to-5)
If all goes well and the USB cable is connected to the PC, the screen remains black and now the tablet windows sees the new device in device manager. Also notice the sound message that windows does when connecting a USB device.
Run LiveSuite and select the Image from the Zip file and hopefully it will prompt you to Format your device and will Flash it with the ICS Image
or your can follow the upgrade instrcutions in this pdf
http://downloads.poi...2XXL V1.2.pdf

jb2kred said:
Just been trying to search for you tablet i think it is a clone of Protab2XXL
Try this link it has an ics image and livesuite
http://downloads.poi...28-20120412.zip
then follow these instructions
Turn the tablet completely and starts in UPDATE mode.
This may be difficult but this is the easiest way to correct in update mode to get:
- Turn the tablet completely and then wait a second or 10 for the security for when the screen is the tablet is not quite ready to close.
- Press 'Home' and 'Power', and press up 1 times the reset button with a paperclip or toothpick.
- Keep your 'Home' firmly and let the 'Power' button and press it 5 times. (As the count-to-5)
If all goes well and the USB cable is connected to the PC, the screen remains black and now the tablet windows sees the new device in device manager. Also notice the sound message that windows does when connecting a USB device.
Run LiveSuite and select the Image from the Zip file and hopefully it will prompt you to Format your device and will Flash it with the ICS Image
or your can follow the upgrade instrcutions in this pdf
http://downloads.poi...2XXL V1.2.pdf
Click to expand...
Click to collapse
I followed this and all went well until i come to the step
" Now unplug the usb cable from the tablet and plug it back into the tablet.
 Wait a moment for windows to recognize the tablet. After this is done the following windows will appear.
 Press Yes "
When i unplug the cable and plug it back windows says " Usb not recognized " and in the device manager it say's " Uknown device "
So livesuit never starts flashing

jb2kred said:
Just been trying to search for you tablet i think it is a clone of Protab2XXL
Try this link it has an ics image and livesuite
then follow these instructions
Turn the tablet completely and starts in UPDATE mode.
This may be difficult but this is the easiest way to correct in update mode to get:
- Turn the tablet completely and then wait a second or 10 for the security for when the screen is the tablet is not quite ready to close.
- Press 'Home' and 'Power', and press up 1 times the reset button with a paperclip or toothpick.
- Keep your 'Home' firmly and let the 'Power' button and press it 5 times. (As the count-to-5)
If all goes well and the USB cable is connected to the PC, the screen remains black and now the tablet windows sees the new device in device manager. Also notice the sound message that windows does when connecting a USB device.
Run LiveSuite and select the Image from the Zip file and hopefully it will prompt you to Format your device and will Flash it with the ICS Image
or your can follow the upgrade instrcutions in this pdf
your links is bad,please update
Click to expand...
Click to collapse

Problem upgrading TF101G

I have a tablet that I didnt use for a few years and decided to update it and use it.
The tablet is TF101G, bought from PELEPHONE company in Israel with their own custom rom including a bunch of garbage apps.
Build is: HTK75.PELEPHONE_epad-8.6.6.24-20111202
Android version: 3.2.1
Firstly I tried to enter recovery mode in order to flash the KatKiss rom available here on the forums, but was unable to enter the recovery mode.
After holding power and vol-down button it splashes a text at the top right corner that i should click the vol-up button in order to enter RCV.
1. If I dont click the vol-up button it splashes another screen with 2 icons - one that restores the factory settings and the other just reboots the device
2. If I click on the vol-up button it shows an android icon with gears spinning inside for a few seconds and then the gears change into an exclamation sign.
Tried using the APX mode flashing tutorials, all of them - without success.
I did attempt to manually firmware update the device but it can't see the update in the sd-card. The only update the device did see, it allowed me to update but stopped in the middle with the same exclamation sign icon. Once rebotted it splashed a message that the update was not compatible.
Tried looking for a compatible update but most of the links for the old asus updates are dead.
I'm totally lost...

[Completed] ze500cl problem update android touch firmware after lcd change

Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:

Miticohtc said:
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Click to expand...
Click to collapse
Anyone can help me?

Guys guys Science may have found a solution right now ... will luckily I do not know, however, acts, then taken by anxiety, I did a downgrade of the OS taking it to the first version available from asus website:
https://www.asus.com/it/Phone/ZenFon...Desk_Download/ and download the oldest! that is, the first at the bottom, downloaded the zip file, and insert it in SD, reboot the phone in boot pressed power button and volume +, with selected RECOVERYMOD down key and select it with the power button, go into recovery and select update from SD car, flashed the firmware previously downloaded and placed in SD at the end you do the second wipe data factory and wipe cache, and reboot, there will dawn upgrade the touch, but the startup screen with the set of languages, now do not do anything and restart again, now it appears the annoying firmware upgrade again always with 0% but the screen "press and hold the power button ... etc .." do it and you will see that it will restart the cell, proceed quietly with the set of the options and creating acount, now every time you turn it on or ravviate, will win for a second the annoying pop-ups but the cell will reboot again and will turn on normally, it is not the best solutions but at least you can use your device, I hope I was helpful and let me know
PS SORRY FOR MY BAD ENGLISH

FIX FILE
HI guy this is a solution, download it,insert in SD card,and flash via recovery
https://www.dropbox.com/s/yyfuxude558rbpj/UL-ASUS_Z00D-WW-12.16.4.3-user.zip?dl=0

Samsung E7 Flash Software

Hello
My phone stuck on safe mode and I am not able to disable it, tried many time (Restart Phone & Factory reset), but it didn't work.
So I decided to re install new firmware on it. I downloaded Odin but i face another problem.
I pressed the power + home + Volume down to get into the mode... Then i got the following message
It ask to press volume Up to start download, and volume down to cancel
but the device is not responding here, it stuck on this message and not responding to any button. and doesn't appear as "added" on Odin (The mobile hangs on this page)
The only option that works (I press power button again for long time, so it restarts)
Can you please help on this
Can you please advice

up