Related
Quick review, sorry I don't have batteries for my digital camera right now, so no pics.
What I bought - I bought a "Crystal Gel TPU Case" in the glossy black variety. The case is flexible, but it keeps it's shape like a hard plastic case. I wanted this type of fit because I had a hard plastic case from the same company and it was damn-near impossible to get off when I had to pull my battery one time.
I paid $8.99 + free shipping. They do have some on sale for less.
The Company - They had contacted me on Twitter at one point, one of those advertisement Tweets. The key was, they offered me free shipping on their products using the code "twitter". So I figured I'd give them a go.
So far, after two orders, I'm pretty pleased. The second order did take a day longer than the first to have processed before it shipped, but I knew from receiving my first order that they were a home-based, small time ordeal by the packaging the first case I ordered came inside (hand-written address and what-not).
Shipping took 3 days both times. I'm in VA, I think the company is in Jersey.
Fit - Fit's perfectly. It's not too tight like the hard plastic cases out there, and it's not loose at all, nice and snug.
Protection - Not the best. You basically get outer case protection, and I would imagine that it's not as good as a hard plastic case.
Look - I bought the glossy black case, which I thought would be a dust and finger print magnet, but it's not too bad.... for dust that is. It does get smudges, but it's a case, I'm not too worried about it.
Overall - 7/10 Good buy for the price. You can get free shipping using the coupon code "twitter" at checkout.
Check them out - cimousa.com
I bought something similar called the Crystal Clear Case off of ebay. About the same price with the same checkerboard pattern on the back of it and I can tell you that it will turn yellow after a couple of months like old plastic does . It's not like a rich yellow but you can see where it starts tinting yellow. I didn't even bother asking for a replacement since it was through eBay and I don't think they'd do it anyways.
Well, GL.
I'm sure it could do that, It's very cheap. I'm buying a case mate case for my n1 after I have enough money to justify a $30 phone case lol
jerhoyet said:
Quick review, sorry I don't have batteries for my digital camera right now, so no pics.
What I bought - I bought a "Crystal Gel TPU Case" in the glossy black variety. The case is flexible, but it keeps it's shape like a hard plastic case. I wanted this type of fit because I had a hard plastic case from the same company and it was damn-near impossible to get off when I had to pull my battery one time.
I paid $8.99 + free shipping. They do have some on sale for less.
The Company - They had contacted me on Twitter at one point, one of those advertisement Tweets. The key was, they offered me free shipping on their products using the code "twitter". So I figured I'd give them a go.
So far, after two orders, I'm pretty pleased. The second order did take a day longer than the first to have processed before it shipped, but I knew from receiving my first order that they were a home-based, small time ordeal by the packaging the first case I ordered came inside (hand-written address and what-not).
Shipping took 3 days both times. I'm in VA, I think the company is in Jersey.
Fit - Fit's perfectly. It's not too tight like the hard plastic cases out there, and it's not loose at all, nice and snug.
Protection - Not the best. You basically get outer case protection, and I would imagine that it's not as good as a hard plastic case.
Look - I bought the glossy black case, which I thought would be a dust and finger print magnet, but it's not too bad.... for dust that is. It does get smudges, but it's a case, I'm not too worried about it.
Overall - 7/10 Good buy for the price. You can get free shipping using the coupon code "twitter" at checkout.
Check them out - cimousa.com
Click to expand...
Click to collapse
Actually i think the soft case would have better protection. hardcases just transmit the force right through with little dampening but the soft rubber/plastic would absorb a lot of the impact.
I like the tpu case more because the silicone stuff attracts lint and doesnt slide in and out pockets as well. They also dont stay on as well a a good tpu case.
i ordered one up also....great price $8.60 CAD includes shipping
Over been using this case for about a month now and I have nothing but great things to say about it. The fit is great and it doesn't add too much bulk. The argyle pattern on the back is beautiful too. I love the smoked color and how its partially see through which allows me to put my contact information on a sticker on the phone and have it show through; 100000X better than an engraving. And you can't beat the price, I think mine was about 8 or 9 bucks with shipping!
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
SystmDcln said:
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
Click to expand...
Click to collapse
I have it and I like it.
Pros:
Thick enough to provide reasonable impact resistance without adding so much bulk you want a trailer for it
It has a felt/microfiber lining that makes contact with the phone, reducing wear on phone surfaces
It removes easily for docking, battery changes and the like
It's not horrid looking
Cons:
Doesn't cover the area below the screen around the trackball
It doesn't look great compared to an uncovered Nexus One
Pricey
I can't improve on this pic:
http://assets2.smartphoneexperts.com/images/product_images/accessories/additional_images/6392/large/2.jpg
I like it! Just got it in last night to replace my Case-Mate Tough Case. The Tough Case was solidly built and looked like it would probably take some serious tumbles. However the rubber trim around the screen and buttons picked up pocket lint like mad. Fortunately Case-Mate has a 100% refund on returns policy. If you don't keep your phone in a pants pocket all day and don't mind a bulkier case the Case-Mate is the way to go.
That being said, the Innocase will probably protect against most of the accidental drops you'll encounter. Previously I had an iPhone 3GS and a 2G since launch and in both cases I used the Agent18 Eco Shield slider case which is a very similar design. I'm sure that over the years I've managed to slide both of those phones over 100ft on concrete and tile without damage after fumbling them.
Try Amazon, esp. the partner retailers. I got mine for $25 shipped.
The Innocase II is a very nice case, the rubbery kind of exterior feels really great in your hands and doesn't pick up lint on the exterior. It should be able to provide reasonably good protection against drops, though I haven't had any experience with dropping my Nexus yet.
The only downsides to this case are:
1. Does not work well with all screen protectors because it fits extremely well. Read that it can't fit on top of Martin Fields screen protectors due to this, but I haven't tried it myself.
2. Picks up lint between the case and the phone. The felt lining to protect the back of the case which protects the phone when you slide it in and out of the case creates a space where the lint gathers.
I was at my local Best Buy today looking at phone accessories when I came across this case and holster for the Nexus One. As I looked closer at it, it looked very similar to the Seidio case and holster, only it was branded Platinum. Upon further inspection, I noticed on the bottom of the packaging in small letters that it was indeed a Seidio product. What really surprised me though was that it was only $10, instead of $35 like the other cases and holsters around it, so I snatched it up right then and there.
Since all the other Platinum brand case/holster were still full price, I can only assume that they are discontinuing this in the stores. I looked on their website and it's still listed for $35. So if you've been looking to get this case and holster, I'd suggest you hit your local Best Buy and hope they still have them in stock before their gone.
I got the same one from the local best buy by me. Solid case and holster for $10. Well made and has all the needed openings for microphones, ports, ect. Phone fits face in or face out in the holster.
Appears to be a rebranded Siedo Innocase™ II Surface Combo - Black which retails for $50 on the Siedo website.
Only problem is (like other cases) you have to remove it to fit it into the desk/car dock. Still a good value.
I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.
bskim23 said:
I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.
Click to expand...
Click to collapse
I don't use a screen protector myself, I've had the case on and off a handful of times since I got it and it doesn't appear to be scratching the screen. I do agree though that the little rubber pieces on the inside do tend to move around a bit, but I've found that if you squeeze the case in as you slide it onto and off the phone, it minimizes the chances of the rubber moving.
Overall, I've always been very happy with Seidio's holster clips, but have to have a case on my phone cause I've very tough on phones, so I'd say the Innocase is perfect.
Now I just need to rig up a way to use the phone in the official car and home dock without having to remove the phone from the case. Gonna have to whip out the Dremel tool, soldering iron and some wood. If I get really ambitious, I may even cast some plastic molds of the phone.
Thanks for the heads up on the case. I went to my local best buy and they did not have it on display. I had to ask one of the cellphone associates to get it for me out of the back. Their SKU is: 9943421 for $9.99 regular price $34.99.
I've been using the Case-Mate tough case exclusively since I purchased the phone in March. All I can say is I'm amazed at how thin this case is. It feels as if there really is no cover on the phone. The addition of a secure belt clip is a HUGE plus in my book. My only gripe so far is I don't think this case will do much good in protecting the phone from a drop out of your pocket or coat.
Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.
garfnodie said:
Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.
Click to expand...
Click to collapse
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....
No joy at my local best buy - but I found an open-package one on Ebay for $7.99 with free shipping - same item.
Open package is no big deal to me though...
Thanks for opening my eyes to this product!
just got this as my seido case was getting really messed up.
the only difference i see is that the inside is rubber rather than seido's felt interior
krazichinaman said:
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....
Click to expand...
Click to collapse
Sound's to me like what you need is the Seidio rugged case. It's similar to the Tough case in that you get a thick rubber wrap with a plastic shell around it, and then that fit's into a special spring holster.
http://www.seidioonline.com/product-p/bd4-hkr4hnx1.htm
I'm sticking with the regular case/holster as that will more than protect the phone from even a tall drop.
I am awaiting my order for the SGP Hybrid-Neo and I'll see how it performs when I receive it.
While waiting for the Spigen case to arrive, I've been looking around for other protective cases with a minimum of material, meaning I'd like the lowest profile protection possible, which Protects the S4. Not a minimalistic case which offers the minimalist of protection, because that defeats the reason I'm getting the case in the first place.
I came across this site which has, in their opinion, the top 15 cases:
http://www.techradar.com/us/news/ph...sung-galaxy-s4-case-15-to-choose-from-1149624
The WorkMate Evolution case peaked my interest, so I took a look at their site over here:
http://www.cygnett.com/smartphone/smartphone-samsung/samsung-galaxy-s4.html?___store=world
I watched their video, and it looked fine, but I'm not impressed by demonstration videos in general, especially ones demonstrated by the designer r/manufacturer of the item I'm purchasing, as there is a possibility of bias
It is 'Real World Usage' that counts, whether the video is accurate or not. I gotta check out the item for myself.
With the above being said, the description of the product and the concept appears that the end result would be a well made case of minimalistic construction with adequate protection.
I did some research and have found complaints about:
- the usb port fitment, the hole not being large enough. I watched the video and in the comment section it has been said that this issue has been resolved by the manufacturer with the updated cases, so I'm not too concerned about this issue as it appears to have been resolved.
- stiffness of power/volume buttons
I have sent an email to Cygnett, and I look forward to receiving their response.
I'll be ordering this case from Newegg, as they have very good shipping times and Return/Refund Policies with No return fees, including 45 days to return the item.
http://www.newegg.com/Product/Product.aspx?Item=N82E16875983832
The case is available from Amazon, but they only Fulfill the orders, and one of the Sellers is in China/Hong Kong with delivery times up to 26 days or so. The other Seller has a 15% fee for Returns.
The case is also available form Cygnett, but the standard shipping times are up to 10 days.
Amazon Update:
The Cygnett WorkMate Evolution case now Ships from and is Sold by Amazon::good:
http://www.amazon.com/Cygnett-CY1194CXWOR-WorkMate-Case-Galaxy/dp/B00BXL7VKM
I'l let you know what I think of the Cygnett when I receive and use the case, including the response from Cygnett.
I just picked up my Cygnett WorkMate in Bright Blue color.
These are my first impressions, as I've only been using it for 2 hours:
1) nicely packaged in a clamshell as other cases are coming in these days.
2) after removing the WorkMate from its packaging, I was impressed with the build quality, and I really liked the color scheme.
3) the 2 part case came assembled, and the S4 'snapped in' quickly and snugly.
4) once the S4 was wearing it's new protection, I was like, 'this is some nice protection' and that I was confident, if dropped, my S4 had a good chance of surviving unscathed.
5) I felt that the WorkMate offers some real nice protection in a very minimalist format.
6) the protective lip surrounding the screen rises nicely above it and appears that it will offer nice protection with lip height to spare for a glass protector.
6) the power and volume buttons do have a stiff feeling to them, but once you get used to it in a short bit, it's not a problem at all. I would say that with use, the buttons will most likely give a little.
7) the usb port was a hair too small lengthwise for the head of the stock usb cable to fit into. After 40s of the minimalist of quick scraping of the 2 sides, the usb head fit perfectly. Can't tell any mod was even done.
I'll see how it goes using this case, as I just received it. I must say that I am impressed with its style, construction and perceived protection and durability in a minimalist form factor.
I say perceived because I just received the case
I have the same case in black. I like it a lot apart from the problem you mentioned with the usb cutout ... just got around to scraping the sides with a blade for a minute or so and now it's a perfect fit.
In terms of protection, I think the YouTube video pretty much speaks volumes about the effectiveness of these cases ... the phone survives a ten foot drop. I've dropped mine once from about four foot and there was no issue whatsoever.
Sent from my GT-I9505
This case is definitely a keeper. I've never used a case prior to this and the SPG Neo Hybrid. The reason being I didn't like weighing down and bulking up what is an otherwise light, thin, flat phone such as the S4, the S3, the S2 or whichever other device that slides into my pocket.
But when I dropped my S3 from about a foot onto concrete a couple of months ago, and the screen fractured, I was like, this is bs. But then the time wasted on trying to get a replacement from Asurion, who sent me a defective outta the box refurbished S3, I started looking for cases for the S4. The SGP is going back due to sagging of the neoprene after 3 days, in addition to it offering very little protection, but my S4 will be sporting the WorkMate.
I haven't applied my SGP Glas.tR Slim as of yet, and I'm thinking about whether I'm going to or not. It would add additional weight, and unless I drop my S4 and it hits the corner of something, I feel the WorkMate will protect the screen from most drops without having to add the glass screen protector. Plus I do have insurance. I gotta give it a little more thought.
Biker1 said:
This case is definitely a keeper. I've never used a case prior to this and the SPG Neo Hybrid. The reason being I didn't like weighing down and bulking up what is an otherwise light, thin, flat phone such as the S4, the S3, the S2 or whichever other device that slides into my pocket.
But when I dropped my S3 from about a foot onto concrete a couple of months ago, and the screen fractured, I was like, this is bs. But then the time wasted on trying to get a replacement from Asurion, who sent me a defective outta the box refurbished S3, I started looking for cases for the S4. The SGP is going back due to sagging of the neoprene after 3 days, in addition to it offering very little protection, but my S4 will be sporting the WorkMate.
I haven't applied my SGP Glas.tR Slim as of yet, and I'm thinking about whether I'm going to or not. It would add additional weight, and unless I drop my S4 and it hits the corner of something, I feel the WorkMate will protect the screen from most drops without having to add the glass screen protector. Plus I do have insurance. I gotta give it a little more thought.
Click to expand...
Click to collapse
I'm wearing a screen protector to guard against scratches. The workmate will protect against most face down drops onto a flat surface. It's rocks and stones which are the only thing you need to fear with this case and I doubt any screen protector and few if any cases can protect you if you drop your phone onto a sharp, pointy rock.
Sent from my GT-I9505
dr.m0x said:
I'm wearing a screen protector to guard against scratches. The workmate will protect against most face down drops onto a flat surface. It's rocks and stones which are the only thing you need to fear with this case and I doubt any screen protector and few if any cases can protect you if you drop your phone onto a sharp, pointy rock.
Sent from my GT-I9505
Click to expand...
Click to collapse
Hopefully I won't drop my S4 into a rock or edge of something that will bypass the protection of the WorkMate and damage the screen, if I choose not to install the glass protector. But Murphys Law will probably apply
I figure the WorkMate will protect the S4 under most circumstances, and in those instances where it may not, I have the insurance.
Sorry to keep posting repeatedly but I'm so stoked about this case. Overjoyed in fact. Most cases add to much bulk or provide too little protection. This bad boy provides excellent protection without adding significant bulk and as a bonus the textured back makes the phone much easier to hold on to.
I'm usually a bit of a case whore and change often but this time I'm staying put. The only other case that's really caught my eye is the Griffon Survivor. I'll probably end up getting that once is available just for those occasions where I really need the maximum protection. The rest of the time I'll be rocking my Cygnet Workmate. :thumbup:
Sent from my GT-I9505
Post away, like I seem to be doing
It seems that the Cygnett doesn't get a lot of publicity, at least in the USA.
I'm sure that is not the case in New Zealand, as the company a in Australia.
In addition to the possible lacking of advertisement, getting the case can be an issue for some.
Amazon has a couple of sellers, but it is not Sold and/or Shipped directly from Amazon. One seller appear to be overseas and can take over 20 days to receive, and the other Seller has a 15% penalty for Returns. Amazon only shows a few reviews for the case which means sales are low. The aforementioned may be some of the reasons for the lack of sales via Amazon. I purchased the WorkMate from Newegg, which is where I suggest others, at least in the USA to purchase from. Even Newegg has no reviews.
As mentioned, I wasn't a case guy, but this case changed my mind about cases.
It just screams out Protection in a very minimalist format. Hey, they have it in Blue which I couldn't resist
Update:
Is this the other case you mentioned?
http://store.griffintechnology.com/survivor-skin-for-samsung-galaxy-s4
The case has a nice look to it, and although it seems to offer more coverage to the top and bottom of the S4 screen, I don't know if it offers better protection than the WorkMate overall. The price of $18 is cheap enough, but I don't know the quality of the case. Once in hand, a better determination can be made.
Biker1 said:
Post away, like I seem to be doing
It seems that the Cygnett doesn't get a lot of publicity, at least in the USA.
I'm sure that is not the case in New Zealand, as the company a in Australia.
In addition to the possible lacking of advertisement, getting the case can be an issue for some.
Amazon has a couple of sellers, but it is not Sold and/or Shipped directly from Amazon. One seller appear to be overseas and can take over 20 days to receive, and the other Seller has a 15% penalty for Returns. Amazon only shows a few reviews for the case which means sales are low. The aforementioned may be some of the reasons for the lack of sales via Amazon. I purchased the WorkMate from Newegg, which is where I suggest others, at least in the USA to purchase from. Even Newegg has no reviews.
As mentioned, I wasn't a case guy, but this case changed my mind about cases.
It just screams out Protection in a very minimalist format. Hey, they have it in Blue which I couldn't resist
Update:
Is this the other case you mentioned?
http://store.griffintechnology.com/survivor-skin-for-samsung-galaxy-s4
The case has a nice look to it, and although it seems to offer more coverage to the top and bottom of the S4 screen, I don't know if it offers better protection than the WorkMate overall. The price of $18 is cheap enough, but I don't know the quality of the case. Once in hand, a better determination can be made.
Click to expand...
Click to collapse
You can just walk into your local chain store and pick up the cygnet cases here. Surprised me ... they don't normally have the best cases. The salesman preached the virtues of the case, I believed him and luckily he was calling it straight.
You've linked the survivor skin, I'm waiting for the survivor.
http://store.griffintechnology.com/survivor-with-belt-clip-for-samsung-galaxy-s4
The skin is to the survivor what the Otterbox commuter is to the Defender. Basically the survivor is the Defender done right. I've heard that the Defender has clips on the phone case which mate to the belt holster and that these clips can smash off in a fall. No such design flaw on the survivor and it has padded flaps to cover all the ports and the camera. Had one on my s3, it added a lot of size to the phone but man that thing felt indestructible.
I don't need that kind of protection every day but there are still occasions where I really want that assurance that my phone has the utmost protection.
Sent from my GT-I9505
Thanks. I'll take a good look at it later, as I gotta get some shut eye
I read the description and it definitely looks like an anti-destrutive case with those listed specs.
Much easier for sure to get the Cygnett where you are. They definitely have a larger customer base there.
LOL, I was stupid to purchase a case at tmobile store cost me 30 buck. Question, I have a white S4 they don't have survivor in white?
Sent from my SGH-M919 using Tapatalk 2
epsix said:
LOL, I was stupid to purchase a case at tmobile store cost me 30 buck. Question, I have a white S4 they don't have survivor in white?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
I just found this for you:
http://www.youtube.com/watch?v=Zcv9mCVIB-c&feature=youtube_gdata_player
Btw, I'm extremely satisfied with my WorkMate, even though I haven't dropped my S4 as of yet
But as I mentioned previously, this case is very well built, and I feel confident it'll protect my S4 in case of any unfortunate drops
Btw, you mentioned the Survivor.
If you're referring to the Cygnett, it's the Evolution.
If your referencing the T-Mobile case, I'm not familiar with it.
4 week follow up
Well, it's been about 4 weeks since I took possession of the Cygnett WorkMate Evolution case in Bright Blue and:
- the case looks as good as it did the first day I received it* (see below)
- the case fits as well as the first day. There is nothing that will stretchout, etc.
- *the light Grey back, when you hold it at an angle to the light, you can see certain areas where there is a slight lightness to the Grey, but only at certain angles. The cause is most likely from natural oils in the skin, as the slight blemish ocurrs where you hold the phone the most.
- I have not dropped the phone as of today, and don't expect to, but if I do, I'm confident that the phone will be very much protected
- although the case adds slight bulk to the S4, as the S4 is so very slim and light without the case, it fits comfortably in my front pocket, and my pants are not of the baggy variety
And there you have it.
My overall rating of this case is 9.8/10 (due to the very hard to notice blemish)
I highly recommend it to those who are looking for excellent protection for their S4, in a minimalist form factor.
This is a case that when you see it, hold it and put your S4 in it, you will be confident that your S4 will be very well protected.
I've updated the op to reflect the fact that the Cygnett case is now Sold by and Ships from Amazon:
http://www.amazon.com/Cygnett-CY1194CXWOR-WorkMate-Case-Galaxy/dp/B00BXL7VKM
Here is an update regarding the discoloration of the Grey back of the case:
I've just taken a couple of pics tonight of the discoloration that the medium grey material has sustained. While it doesn't affect the protectiveness of the case, it does affect the aesthetics.
The discoloration of the case has occurred where my hand/fingers grip the back of the case the most.
When the Cygnett was my edc, the discoloration gradually occurred over the course of approx. 6 weeks. It looked great when it was new, but not that great after only a month and a half.
I just sent an email to Cygnett 's US office regarding this issue. I'm hoping this issue is just an exception, but if it's a material flaw, hopefully it has been resolved.
http://us.cygnett.com/contacts
Update:
I didn't receive a response to my email so I called the phone number for Cygnett's US office.
Spoke with a very nice rep, and explained my issue.
She is sending out a replacement shell, and gave me her personal email address.
I sent her my shipping info, and she responded that she just shipped out the replacement.
Excellent customer service:good:
Biker1 said:
I've updated the op to reflect the fact that the Cygnett case is now Sold by and Ships from Amazon:
http://www.amazon.com/Cygnett-CY1194CXWOR-WorkMate-Case-Galaxy/dp/B00BXL7VKM
Here is an update regarding the discoloration of the Grey back of the case:
I've just taken a couple of pics tonight of the discoloration that the medium grey material has sustained. While it doesn't affect the protectiveness of the case, it does affect the aesthetics.
The discoloration of the case has occurred where my hand/fingers grip the back of the case the most.
When the Cygnett was my edc, the discoloration gradually occurred over the course of approx. 6 weeks. It looked great when it was new, but not that great after only a month and a half.
I just sent an email to Cygnett 's US office regarding this issue. I'm hoping this issue is just an exception, but if it's a material flaw, hopefully it has been resolved.
http://us.cygnett.com/contacts
Click to expand...
Click to collapse
I've had mine for about 2 month and the colors are still fine.
keltsi95 said:
I've had mine for about 2 month and the colors are still fine.
Click to expand...
Click to collapse
The gray backing has a wear patten on mine.
I took a closer look and in between the tiny raised bumps, the material is worn, which creates the 'discolored' look pattern which is more perceptible at certain angles.
Still a case which appears to offer excellent protection, although I haven't dropped mine yet .
I noticed that Urban Armor Gear (UAG) had available P7P cases on their website, so I ordered one when I ordered the phone on October 6th.
Received the phone on the 12th, but the case had not yet shipped. I sent them an email that they replied to with, "We have 8-10 days to ship orders." A little standoffish, but ok, maybe that person was just tired of answering emails.
Received the case today October 20th. 14 days? Not too bad if I stop comparing everything to Amazon, but a long enough time that I ended up getting a Spigen Ultra Hybrid case from Amazon cause as you all know, the phone itself is quite slippery. It fit and worked just fine but the cutouts in the bottom felt a little sharp, as per usual with Spigen.
Anyhow, when I was looking at the UAG case on the website it looked fairly bulky and I was pretty sure I wouldn't be able to use wireless charging but I can confirm that it is charging wirelessly as we speak on a 1st gen Pixel Stand.
The case is a little less rugged than some of their previous ones. As far as back and corner protection, I think it's fine, but what concerns me most is the screen. The older cases (for phones without beveled edges) had a raised lip all the way around them to help protect them but with how the P7P is designed, the case is designed with the curved screen in mind and so it is only protected when placed on an absolutely flat surface.
The corners are slightly raised while the sides of the case thin down below the bevel, which makes sense, but also causes me anxiety because if I drop it, it's basically a coin flip on whether or not the screen survives.
The case itself feels ok. Not great, and definitely not secure as the edges will sometimes lift or push away from the side of the phone as you handle it.
The extra bevel around the camera ribbon is great, and all the cutouts feel nice and smooth.
A picture they don't show you on the website is the top of the case. There is no window or cutout for the antenna area and only a small hole for the mic.
I don't use a screen protector but as far as I can tell, I doubt you would be able to get one to stay on this thing with how flimsy the sides of the case move around and don't really hold tight to the phone. Even the cheap Spigen case held more securely.
I'll give it a few days but as someone who used to love UAG cases back in the Pixel and Pixel 3 XL days, I'm pretty disappointed in this new one.
I noticed they had that case and I thought about it but I stopped buying UAG cases when the Pathfinder for my 8 Plus literally fell apart. Switched to Spigen Tough Armor since and have had zero issues.
EDIT: Actually I think it was my HTC One (M8). Either way, it split at the bottom and I had to toss it.
Everything they said and more. Had it on my phone 1 day....and that was because I was at work with no backup case. Promptly sent it back for a refund. JUNK! Cuts off the screen corners, peels up screen protector, etc. NO THANK YOU!
FWIW, I got this case today: https://www.amazon.com/dp/B0BBFXYPQ2?psc=1&ref=ppx_yo2ov_dt_b_product_details
It feels like the GOOD UAG cases felt when I used my Galaxy Note 20....much better than the actual UAG case for the P7P. Just wish it also came in other colors....