[Q] Bury cc9060 and desire with froyo - Desire Accessories

Seem to be having problems with this setup - the phone sees the bury, pairs then accepts connection with the don't ask again checked. Then it says its paired but won't connect for love nor money and ideas anyone - have updated bury to latest firmware ...

Turn of A2DP for reliable performance
Sent from my HTC Desire using XDA App

do you have enabled the checkbox on your desire that the phone is visible for the bury?
when not the bury is unable to sync your contacts and so on.
with my milestone was it the same problem.
other problem I still have that I'm not able to get my mails and sms syncing with my bury. did it work with the desire?

Related

Com ports

Hey guys,
Right quick story of whats going on, basically i got my XDA stellar hock up via bluetooth to my laptop at work using active syn, and is set to com port 8. the reason i do bluetooth is casue our work server wont allow usb connection, dont ask why, but bluetooth works fine.
so just yesterday my fone broke and currently taken it to get repaired, now i have got my old XDA orbit which i used before, and i need to transfer all my contacts i saved in outlook on to me old XDA orbit, so i paired the laptop and the fone, but active syn didnt work said i need to pair, so i tried to set the fone to have an outgoing port to the acer (laptop), but i have only got options for com6 & com7. i need to add com8 on my fone so i can active syn with the laptop, any ideas how i can add a com8 to my XDA orbit??
I hope this makes sense
Kind regards
shane

HTC Desire HD - HTC Sync problem

Right here goes, I previously owned an HTC Hero which we all know had problems when it comes to connecting it to Win7 64bit os when Win7 first came out, that was until Sync 3.0 came out. I installed the new version on both my laptop and pc (both running win7 pro 64bit) and my Hero could connect perfectly to both. This is where it gets strange...
I just received my brand new HTC Desire HD, and thinking that the software for the Hero would be different to the HD I cleverly uninstalled the original software and isntalled the new software from the SD card, mounting it from the phone first. Mistake starts here
Installation went fine but when I connected the HD to the computer it would hang for a while at 'Searching for Drivers' and then eventually come back with 'no drivers found.'
I then decided to check the HD on my laptop and well what would you know, it worked first time with out any new instalation etc. After this is thought I would then try the Hero on the pc again and you guest it, 'no driver found' yet the Hero also works with the laptop still
This is what I have tried with the pc:
Call HTC for phone help - Lady was useless didnt even know what the HTC Desire HD was though I had made the phone up
Reinstalled Sync 1 million times - no change, each time restart between uninstall/reinstall
physically copy HTC directory from laptop to PC - still nothing
try every usb slot known to man - rear/front/hub/keyboard/printer (port on printer to connect devices)
system restore to a time before i got the new phone - system restore successful but driver still not found for both phones
install various different versions of Sync and Drivers - nothing
contact HTC by email - two day turn around and not very helpful each time
unplug other devices/turn off all programs/ turn off all anti-virus software etc - nothing
make sure that usb debugging is on - although have tried it with out and still nothing
I know it is not necessary to use HTC sync as all my contacts are synced using google and my music and photos are all on SD but it is a feature that the phone has so I want to be able to use it. short of a fresh copy of windows I don't really know what else I can do.
please help!! am i missing something?
regards
Tim
Hey , did you solve the issue, i HAVE THE SAME ISSUE
hi,
i have also the same worries with Win7 32 bits
Tim, a workarround waiting for a solution is to use the FREE MyPhoneExplorer
you have to install the desktop version, and also to install the "client" on your phone
(phone client available on AndroidMarket) which allows you to save contacts, sms, Pictures et even a full backup of sd card. It's a famous soft , i used it many years ago for sonyericson phones, i had forgotten it and i discovered recently it was available for android phones !
My HTC is azerty(French stock ROM)
i tried many things without luck(reinstalling, uninstalling, removing all usb devices related to htc under windows' safe mode, reinstalling, trying to install vista/xp htc drivers via manual update of drivers):
what i have working when i am connecting my Desire Z, to one of my desktop's usb port(translated from french):
-Mass storage : ie my Desire's Z microSD card is seen by the computer as an USB key.
-RDNIS(last choice in "connection to PC") : which allows my Desire Z to access internet via my desktop on my LAN and it works : i am able to browse the internet using my home LAN
-But HTC sync (latest version) on my PC doesnt recognize my Desire Z when it's plugged in
Merry Christmas

[Q] Sync Problem

Hey everybody!
I searched all over the Internet for an answer, even sent an email to htc, but my problem wasn't solved.
I have this connection problem with my HTC TYTN 2. When I connect it to my PC, my PPC starts charging, but on my desktop I get no notification at all that a device has been connected. I installed Active Sync, HTC Sync, and still didn't find anything. What could this possibly be? I managed to connect my PPC through wireless and using WIFI Remote (a PPC app). But I need an USB connection so that I can fully use it. Please help me, I've tried everything (I think)

[Q] ICS from WM6.5 to Android

Hi
I own a HTC Snap phone, running WM6.5 and without a touch screen, which seems to be a lethal combination (for example, the XDA facebook app will not work on my phone).
When using a windows XP laptop I simply connect the phone via USB and use it as a modem, but I assume this won't work on the Android tablet.
So I'm trying to find a way to share my 3G connection to my Android 3.2 tablet.
The default ICS app is useless - the tablet doesn't see the phone either when sharing through WIFI (I understand Android will not recognize ad-hoc wifi connections) or when using BT.
I tried installing the trial of wmwifirouter with the same results.
I tried the XDA ICS app (I think it was a port of the HTC app) and couldn't get it to run, probably because it was expecting a touch screen input.
Is there any way to solve my dilema without replacing my phone?
Thanks
There used to be an app for WM called wifi hotspot. If you could install it on your phone, the tablet would connect to it via wi-fi.
http://forum.xda-developers.com/showthread.php?t=538874
http://us.wmwifirouter.com/features/
I'm 90% sure that's the one I tried that didn't work because my phone has a keyboard and no touch, but I'll try it again.
Yep, it's not working on the HTC snap.
http://forum.xda-developers.com/showpost.php?p=10946496&postcount=793

[Q] Sixaxis controller on Virtuous Inquisition?

Hi all,
I've recently switched to a Sensation from the Desire HD. I'm running Virtuous Inquisition 3.0 Senseless and have to say I'm loving ICS.
I came from using a Desire HD and play a lot of games with my PS3 controller and the Sixaxis software. I never had any problems before.
I've installed this on my Sensation but whenever I try to connect I get the following message
"Bluetooth will be disabled while using Sixaxis controller. Continue?"
My only options are yes or no. If I select Yes then Bluetooth switches off so I cannot find my bluetooth address or use the programme. If I say no then it stops the programme running.
I know stock HTC roms are not compatible with this app due to their bluetooth restrictions. Usually they just don't find the address though with this app. I've not had this message before. I'm running the Senseless version of virtuous Inquisition but I'm not sure if that matters?
Any help or suggestions would be much appreciated.
Thanks
That message is normal. It just means that the app will take control of bluetooth, thus warning you that any connected bluetooth devices may be disconnected. If you get a failed to configure bluetooth message, then the firmware is not supported.
Thanks for your help. Turned out to be the rom. I'm back playing happily now.
Sent from my HTC Sensation Z710e using xda premium
Which ROm did you use to play with sixaxis ?
thks

Categories

Resources