Database Info

Best addons for the XDA II ?

I've just ordered up my XDA II which should be here by wednesday.
Just wondered what you guys suggest the best upgrades for it are?
There are a lot of screen protectors on ebay, which are the best, or should i go somewhere else.
Best bluetooth headset?
Best case? For my old XDA, i made a slip in case as i don't like the bulky flip cases. I'd like to get another for the II, anyone know where i can buy a slip case or get a leather one made?
Best memory card, SD or mmc? 128mb or 256mb

The xda2 comes with a very reasonable flip case, the reusable/washable screen protectors are better than the throw away type, however in my experience I have not been able to remove the protector for washing without ballsing it up around the edges. The best headset I have tried is the Ericcson HBH-65.

I'm after a pouch case really rather than the flip as its less bulky.
Anybody had experience with screen protectors, whats the best make? ebays has pdair, brando, moshi moshi, ECfilm etc
are these cheap £5.99 hotsynch/charge cables any good?

martin fields overlay
Give these a go...i've got one. Easy to apply, washable too, but after 3 months i still haven't needed to wash it. Read the review, http://www.mypdacafe.com/articles/read.php?id=165, i can corroborate it.
I've just checked the site, www.overlayplus.com but it seems it is down temporarily, d'oh :?

Quote: are these cheap £5.99 hotsynch/charge cables any good:
Some of them discharge instead of charging the xda2 but work ok with xda1.

'some' discharge, so its pot luck with the xda II? Maybe be worth getting a proper one then from a proper accessory shop.
Anyone had any luck with a pouch case for these? I made one for my XDA II, but haven't got the bits to make another. May go and fine a leather shop and see if they can make one up

Best slip cases available are from http://www.nutshell.cc
Tuff-as-nuts and they mean it. I've just got one for the XDA II and it's really slim in comparision to the flip cases (standard + covertec case) I got the one with the belt loop and an open (no flap) top.
I would recommend a nice set of e-grips too (http://www.egrips.com) with the grips on the side, it's nice and easy to remove the XDA II from the case.
Cheerio

the nutshell looks like what i'm after. Do they have distributors in the uk, or do they have to be got from the states?

Discharging?
Not excetly the best place to discuss the topic on 'xda2 discharge when the usb sync/charge cable is in use' ... but since someone here mentioned this, i guess i share a finding on this.
i used to charge my xda1 on my labtop using the sync/charge cable, but with the xda2, the sync charge cable seemed like always discharge when the device is plug into the usb port. ...
i think this is some kinda of bug .. to overcome this, just plug the xda2 to the usb (using of coz the charge/sync cable), wait for the sync to complete, then unplug it for 2 secs and reconnect it back again. walah ..! the xda2 should be charging now, instead of discharging. ^^
it had always worked for me since last month .. ^^ hope it works for the rest of the xda2. any feedback?

Tuff-as-nuts cases come from New Zealand. But Expansys do them in limited ranges and also with their own logo embossed. (http://www.expansys.com/product.asp?code=206-00)
I bought mine direct and it took just over one week to arrive. I've attached some pictures to show you. I'm going to write a full review for posting on tekguru.
Cheers
Howard

As for Sync/Chage USB cables, I use a retractable one from JavoEdge. http://www.javoedge.com there was a problem with the initial shipments of these cables as the manufacturers thought the pinouts were the same on the XDA I and XDA II. This is not the case. I had two, the first one did not charge the XDA II if the battery level was below 72% when connected. In fact over a period of time the battery was actually discharging while connected.
Javoedge were very good in the customer support, they listened, and understood and then sent a replacement one that works perfectly.
Cheerio
Howard

So now I'm done with my gadgets
I've purchased the following items:
Nutshell black pouch case (exactly like the one on the pictures above) http://www.tuff-as-nuts.com/O2-XDA.html
VERY pleased! It's really nice.
A set of silver e-grips from http://www.egrips.com/catalog/product_info.php?products_id=394
Really comfortable and slim. Still possible to dock (if you don't stick the side-ones to low).
Screen protector from Boxwave http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-qtek-2020_105.htm
Also very nice. The only one I've tried so far but I'm very pleased with it.
Here's a good review on different screen protectors:
http://www.brighthand.com/article/Protect_Your_Screen
So, that my gadget-list!
/Fred

I've used a WriteSHIELD screen protector for over a year, and when I took it off because I had dropped :-( my XDA so the screen cracked, it had no scratches at all (and I write a lot!). It comes with three protectors and is rather expensive, but needless to say I've just put on the second one on my new XDA II. If you follow the included instructions carefully, you'll get a flawless protector application (no bubbles underneath).
As I write a lot on my pocket computer, I've also bought a properly sized stylus. It's actually a pen with several tips (one's for the screen) and is much better than the thin, flimsy one included in the XDA, which will give you a cramp in your hand if you write a lot. Of course you'll have to carry it by itself, it doesn't fit in the XDA!

That case looks like JUST what I want. But...how do you get it out without hitting a side button? Seems impossible.
I second the recommendation for WriteSHIELDs; the best.
On BT headsets, I just posted a mini-review last week, search for it. I also have three more of them on the way to try out. Right now I'm using the G-Lite, and like it a lot. It's not perfect, but good, and tiny. I have returned the Jabra and Motorola HS810. There are a number of others I tried in the store and decided against right away.

It's almost impossible to take it out without touching the buttons...however, I use the key-lock feature, so it's not a prob for me.
As far as BT headset goes, I'm using Jabra BT250 and I'm very pleased with it. I specially like the sound in the ear-plug.
/Fred

I haven't tried it, but doesn't it automatically unlock if a call or SMS comes in? So if you want to grab it to answer a call or message, you end up hitting keys?
I still haven't found a good way to carry the XDA II. I'm still using the XDA I case from EB.

Top cases for HTC HD Mini

If you’ve got the HD Mini, you’re going to want to keep it safe and protect it against knocks and drops, so to help you find the best cases and covers I’ve compiled my list of the top cases for the HTC HD Mini.
Check it out here:
http://pockethacks.com/top-cases-for-htc-hd-mini/

Still looking for a clear battery cover for it

Another one
vvv.noreve.com/product_info.php?products_id=2376

How do we buy? The site doesn't seem to offer link for purchase.

Ordered the silicone one and in my opinion it makes the phone look ugly a bit and after all it kills the great feeling when you hold it in hands without the case. So I'm gonna buy a full body clear protection from zagg or elsewhere.

Win_XP said:
If you’ve got the HD Mini, you’re going to want to keep it safe and protect it against knocks and drops, so to help you find the best cases and covers I’ve compiled my list of the top cases for the HTC HD Mini.
Check it out here:
http://pockethacks.com/top-cases-for-htc-hd-mini/
Click to expand...
Click to collapse
Where to buy this case?

I think I'll be using this phone without a case - which is a first for me. Must have spent hundreds on different cases for different models over the years. The back on this phone feels pretty good and as it covers just about all but the screen, is an easy option to change if it gets damaged. I've just ordered a replacement back from an ebay trader for just under £10:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320563176539&ssPageName=STRK:MEWNX:IT
Happy to report on its quality if anyone is interested.

Been really happy using a belkin slip-in iphone case with my HD mini.
It sits in quite snug, pull-tab lifts enough of the mini out & I've not had any issues with catching the answer/reject buttons!
Originally got the case for my Treo Pro, quality is bob-on (ta Belkin!), & has lasted great!

I have bought this case from e bay. fixes nice on my mini and the quality of the case is very good
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370364154490&ssPageName=STRK:MEWNX:IT

what about this zagg invisible shield?!
anyone using it?
is it really worth?!
cya.

ebays about the best to get a case,since iv had mine i havent used one,as long as you look after it,theres no need for 1,unless its a work phone or something,depends what your doing...

Clear Coat Scratch Protection
BATFINK74 said:
ebays about the best to get a case,since iv had mine i havent used one,as long as you look after it,theres no need for 1,unless its a work phone or something,depends what your doing...
Click to expand...
Click to collapse
Hi,
I ordered this Clear Coat Scratch Protection together with my htc hd mini. The store sent me one that is custom fit for this particular model
http://www.mobicity.com.au/catalogsearch/result/?q=htc+hd+mini&x=26&y=11
So I now just have the hd mini in my pocket or bag, and use it ala-commando (no case, nekkid, you get my drift)
It is really clear, capacitative screen is as responsive when the coating wasn't applied yet (except when WM was acting up )
Apparently very strong and seems to be so.
I'm happy with it
cheers
Curiouser

suggestions for a belt clip case w/ access to headphone jack

what have you?

I'd like to know this too.

You want the leather cases or the type where you "clip" the phone onto the case?
Regarding the clip on type, go to this thread and theres various links to different types of cases like that, I use the HTC clip, it's wonderful!
http://forum.xda-developers.com/showthread.php?t=819182
If a leather case is what you're looking for, a generic case will work, you just have to find one that you like.

I've got the HTC one to use while riding my motorcycle so I can confirm it still has access to the headphone jack, I use it all the time.
However I'm not a big fan, the plactic spring clip it pretty fragile; I've gone through two in a month already. But there's not much out there right now and they're cheap, so if you need one they're not bad.
Sent from my HTC Vision using XDA App

My To 5 Accessories [With links]

I don't really post as much on here as i used to when i had my touch pro 2 but i just thought i'd help some people out who where looking for some accessories for their new toys. After paying $500 for this, as i used to upgrade for a hd7, i knew i had to get the best products to make my phone better. And before anybody asks i'm not affiliated in any way with any of the companies whose products i will be discussing.
1. GadgetShieldz Full Body Screen Protector
http://www.gadgetshieldz.com/htc-sensation-4g-skins-screen-protectors-covers-cases-shields.html
I have tried random cheap screen protectors, zagg screen protectors and this. The zagg screen protector was too rubbery for me to even swipe my finger across it. I've been using gadgetshieldz on my past 4 htc devices starting with the touch pro and these are by far the best i've used. Not many air bubbles if you apply it correctly and the few that do come up with be gone within a day. And the best part about these screen protectors are that it only cost $6.99 for a full body case.
2. Anker 1900mAh Extended Battery
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220809453541&ssPageName=STRK:MEWNX:IT
I've been using this battery for about a week now. Compared to the oem battery it does have a better battery life. I have not really tried to see how old it lasted but in the settings it said that the last cycle held 11 hours and 40 minutes before it died. I have had it die on me a few times because i don't charge it a lot but that's been intentionally to let it die from reading around about lithium batteries. It also does not get as got as the original oem battery which i like the most. I plan on getting a few more of these next month.
3. Transcend 32 GB Class 4 microSDHC Flash Memory Card
http://www.amazon.com/Transcend-Class-microSDHC-Memory-TS32GUSDHC4/dp/B004R7P28W/ref=sr_1_1?ie=UTF8&qid=1311960824&sr=8-1
This doesn't even need much explination. Everyone likes to have more memory. I put a 32gb card in my hd7 as i thought i was going to keep it and i knew i needed one for the sensation too. I am one of those people that downloads a lot of apps plus i wanted space for music and videos. The speeds on this card are pretty face. I get an average speed using teracopy of 18 to 20mb/s. That's a lot faster than my class 2 card that came with my hd7.
4. Aluminum Metal Case for HTC Sensation 4G Z710e
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11001246&products_id=33051
I think this company used to be called monaco as they make the same exact cases as monaco did. I bought my first monaco metal case for my tp2 when i found out about it on here and haven't looked back since. I always purchase these metal cases because they protect my phone in case of falls and i can use the phone which it is in the case. It has cut outs for all the ports. I think this is for the sensation unlocked because all the other metal cases i got from them have cut outs for the logos but the phone still fits none the less. What i like the most about this case is with the clip attached i can lay it on it's side and it would be like a kickstand because it can be used in landscape mode when watching a movie. Also you can use the case with the car mount that i will talk about next
5. Car Mount for PDair Aluminum Metal Case
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11001246&products_id=30009
This is a car mount that can be used with the case that i just mentioned previously. So you can attach it without taking the phone out of the case. This works great when using it for navigation. The car mount comes with the windshield cup, the holder that attaches to it and a clip holder for the case. The aluminum case comes with a round clip that screws into the back for the belt holder. This one comes with another clip that has an octagon shape that allows you to place it into the car mount so that it will stay at the angle you place it. I always super glue this clip mount to the case so it does not get unscrewed. I have no reason for the one that comes with the case as this works with the belt holder as well. The car holder cost $12
6. Logitech s120 computer speakers
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220814003710&ssPageName=STRK:MEWNX:IT
I got these for 2 reasons. My main reason was the obvious which was for music purposes. Since i've gotten this phone i've been listening to pandora and i also have a nice amount of music on my phone. The second reason was to use it as a speaker. I've never really had to use it as i'm content, not happy, but content with the volume of the speaker on the sensation although i liked the hd2's speaker better. These speakers have served good my all general purposes. Plus for $12 it'll work nice when listening to music with friends.
7. Motorola S9-HD Bluetooth Stereo Headphones
http://www.amazon.com/Motorola-Bluetooth-MOTOROKR-MOTOACTIV-Headset/dp/B001LXR0BW/ref=sr_1_1?ie=UTF8&qid=1311960316&sr=8-1
I bought these a few months ago when i had my hd2 or hd7, can't remember but anyways i got them to replace my logitech freepulse headphones as the cushioning on them started to come off. I also wanted bluetooth headphones that i could also use as a headset to talk through. These work perfect for both intentions. The music sounds crisp and i have never gotten a complaint when talking to someone with them. I chose these over the s10s because of the reviews between the two. I paid $60 when i got mine but you can get them for $45 now.
8. Motorola T505 Bluetooth Portable In-Car Speakerphone
http://www.amazon.com/Motorola-T505-Bluetooth-Portable-Speakerphone/dp/B0030BZ7HM/ref=sr_1_1?ie=UTF8&qid=1311962000&sr=8-1
I have had this for a few years now. I used to have the t305 but i upgraded to this. The sound quality is pretty nice and audible even when your driving with the window down. I like this speaker because it actually annouces the number of the person that is calling you.
If i have time i will take pictures of these items and post them on here. I hope that i helped someone out who is trying to find the perfect accessories.

noggind614 said:
I don't really post as much on here as i used to when i had my touch pro 2 but i just thought i'd help some people out who where looking for some accessories for their new toys. After paying $500 for this, as i used to upgrade for a hd7, i knew i had to get the best products to make my phone better. And before anybody asks i'm not affiliated in any way with any of the companies whose products i will be discussing.
1. GadgetShieldz Full Body Screen Protector
http://www.gadgetshieldz.com/htc-sensation-4g-skins-screen-protectors-covers-cases-shields.html
I have tried random cheap screen protectors, zagg screen protectors and this. The zagg screen protector was too rubbery for me to even swipe my finger across it. I've been using gadgetshieldz on my past 4 htc devices starting with the touch pro and these are by far the best i've used. Not many air bubbles if you apply it correctly and the few that do come up with be gone within a day. And the best part about these screen protectors are that it only cost $6.99 for a full body case.
2. Anker 1900mAh Extended Battery
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220809453541&ssPageName=STRK:MEWNX:IT
I've been using this battery for about a week now. Compared to the oem battery it does have a better battery life. I have not really tried to see how old it lasted but in the settings it said that the last cycle held 11 hours and 40 minutes before it died. I have had it die on me a few times because i don't charge it a lot but that's been intentionally to let it die from reading around about lithium batteries. It also does not get as got as the original oem battery which i like the most. I plan on getting a few more of these next month.
3. Transcend 32 GB Class 4 microSDHC Flash Memory Card
http://www.amazon.com/Transcend-Class-microSDHC-Memory-TS32GUSDHC4/dp/B004R7P28W/ref=sr_1_1?ie=UTF8&qid=1311960824&sr=8-1
This doesn't even need much explination. Everyone likes to have more memory. I put a 32gb card in my hd7 as i thought i was going to keep it and i knew i needed one for the sensation too. I am one of those people that downloads a lot of apps plus i wanted space for music and videos. The speeds on this card are pretty face. I get an average speed using teracopy of 18 to 20mb/s. That's a lot faster than my class 2 card that came with my hd7.
4. Aluminum Metal Case for HTC Sensation 4G Z710e
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11001246&products_id=33051
I think this company used to be called monaco as they make the same exact cases as monaco did. I bought my first monaco metal case for my tp2 when i found out about it on here and haven't looked back since. I always purchase these metal cases because they protect my phone in case of falls and i can use the phone which it is in the case. It has cut outs for all the ports. I think this is for the sensation unlocked because all the other metal cases i got from them have cut outs for the logos but the phone still fits none the less. What i like the most about this case is with the clip attached i can lay it on it's side and it would be like a kickstand because it can be used in landscape mode when watching a movie. Also you can use the case with the car mount that i will talk about next
5. Car Mount for PDair Aluminum Metal Case
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11001246&products_id=30009
This is a car mount that can be used with the case that i just mentioned previously. So you can attach it without taking the phone out of the case. This works great when using it for navigation. The car mount comes with the windshield cup, the holder that attaches to it and a clip holder for the case. The aluminum case comes with a round clip that screws into the back for the belt holder. This one comes with another clip that has an octagon shape that allows you to place it into the car mount so that it will stay at the angle you place it. I always super glue this clip mount to the case so it does not get unscrewed. I have no reason for the one that comes with the case as this works with the belt holder as well. The car holder cost $12
6. Logitech s120 computer speakers
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220814003710&ssPageName=STRK:MEWNX:IT
I got these for 2 reasons. My main reason was the obvious which was for music purposes. Since i've gotten this phone i've been listening to pandora and i also have a nice amount of music on my phone. The second reason was to use it as a speaker. I've never really had to use it as i'm content, not happy, but content with the volume of the speaker on the sensation although i liked the hd2's speaker better. These speakers have served good my all general purposes. Plus for $12 it'll work nice when listening to music with friends.
7. Motorola S9-HD Bluetooth Stereo Headphones
http://www.amazon.com/Motorola-Bluetooth-MOTOROKR-MOTOACTIV-Headset/dp/B001LXR0BW/ref=sr_1_1?ie=UTF8&qid=1311960316&sr=8-1
I bought these a few months ago when i had my hd2 or hd7, can't remember but anyways i got them to replace my logitech freepulse headphones as the cushioning on them started to come off. I also wanted bluetooth headphones that i could also use as a headset to talk through. These work perfect for both intentions. The music sounds crisp and i have never gotten a complaint when talking to someone with them. I chose these over the s10s because of the reviews between the two. I paid $60 when i got mine but you can get them for $45 now.
8. Motorola T505 Bluetooth Portable In-Car Speakerphone
http://www.amazon.com/Motorola-T505-Bluetooth-Portable-Speakerphone/dp/B0030BZ7HM/ref=sr_1_1?ie=UTF8&qid=1311962000&sr=8-1
I have had this for a few years now. I used to have the t305 but i upgraded to this. The sound quality is pretty nice and audible even when your driving with the window down. I like this speaker because it actually annouces the number of the person that is calling you.
If i have time i will take pictures of these items and post them on here. I hope that i helped someone out who is trying to find the perfect accessories.
Click to expand...
Click to collapse
For me I like #4 and #5, the aluminum cases with belt clip. Looks a bit bulky for my taste but looks different. Kudos for that but I prefer the leather universal case I have and the Mobi red case that fits together nicely. But that car mount is really cool though. Thanks for the alternatives!

Finally! Brodit holder available soon :)

Brodit.com
Could do with an active one, but passive will do for now

Seems like ages from announcement to going on sale, but I finally got it today from mobilefun.co.uk and have just fitted it in the car.
Usual Brodit quality, and a fit like a glove perfect fit. Well pleased
Sent from my HTC One S using Tapatalk 2

they also have a active loader, look:
http://www.brodit.com/product.html?id=513386&pn=prod&brand=HTC&model=One S Z520e

The active with cig-plug looks great:
http://www.brodit.com/product.html?id=512386&pn=prod&brand=HTC&model=One S Z520e
but how do you actually buy the thing?

I got my passive one from www.mobilefun.co.uk
Had an active one with my desire, top quality kit.
Sent from my HTC One S

Looking forward to this mount, looks great. Just waiting for it to be in stock.

Got the Active Holder for my wife's One S and I'm very disappointed with the usb fit, not quite aligned and it takes a bit of coaxing to get the phone connected.
I've got the active holder for my HTC HD2 and that was perfect slide in and fit, but the Active holder for the One S is not good in my opinion.

I still use the Brodit one designed to work with the mytouch 4g (back when I had one). It fits my Sensation.. my Amaze... and now my One S just fine! LOL

I yesterday received my brodit htc one S active charger with cig.
As it seems now, the powerconnector is not aligned to the phone correctly. I need to pull the phone towards me for approximately 1 mm to be able to slide the phone in place.
I am a bit unhappy with it. I contacted brodit about it and asked them what they advice me to do. Send it back as DOA or let me execute a trick/fix of somesort.. whatever..
Ill let you know what comes out of it.
Regards.

Got my brodit holder today, it takes a long time to get the usb to line up. Is there something inherently wrong with our phones usb port? Something to do with the unibody frame? I'm thinking of returning it, because it's not convenient to have to spend 3 minutes lining up the phone perfectly to fit in the charger.

Especially when you spend at least $60 dollars for it !!! LOL

Heat Gun on Brodit
I used a heat gun on my Brodit holder for the Nexus-S and it now fits my HTC One S w/case perfectly

Chromosome_8 said:
I used a heat gun on my Brodit holder for the Nexus-S and it now fits my HTC One S w/case perfectly
Click to expand...
Click to collapse
Sounds interesting, do you have pictures of it?

Who used the HTC HC-C740 hardcase in combination with the Brodit active holder? And did it fit?

I can confirm the Brodit holder in combination with the HTC HC-C740 hardcase does fit, but not very easy. Also without the case the Brodit holder doesn't work nicely. I will return it and look for an alternative..

Does the active holder automatically enable car mode like the HTC official car dock?

that indeed looks nice!

Just to give you all an update with my active brodit experience.
I had the 'not perfectly lined out power connector" issue, like some others said.
Now, it seems to be getting better and better. I get the feel there is some rubber badding around the connector which is memorizing the correct position more and more.
It is probably not SUCH a big fuzz for most people I guess. Im getting used to it.
Even when its dark I have the One S in place with one hand. Takes me up to 5 seconds.
So, Now after a while, I can say Im pretty happy with it.
Regards.
-------------------------------------------------------------
Currently using:
HTC One S gray (unrooted still - stock)
Samsung Galaxy Tab 10.1 (rooted-stock)
Old:
HTC Desire
HTC Diamond
E-TEN G500

edterbak said:
Just to give you all an update with my active brodit experience.
I had the 'not perfectly lined out power connector" issue, like some others said.
Now, it seems to be getting better and better. I get the feel there is some rubber badding around the connector which is memorizing the correct position more and more.
It is probably not SUCH a big fuzz for most people I guess. Im getting used to it.
Even when its dark I have the One S in place with one hand. Takes me up to 5 seconds.
So, Now after a while, I can say Im pretty happy with it.
Regards.
-------------------------------------------------------------
Currently using:
HTC One S gray (unrooted still - stock)
Samsung Galaxy Tab 10.1 (rooted-stock)
Old:
HTC Desire
HTC Diamond
E-TEN G500
Click to expand...
Click to collapse
Thing is, Brodit holders that I owned until now are 100% perfect. This one isn't. I returned it yesterday because it just didn't did the job and I paid almost 50 euros for it. I would expect a better product, just like I was used to...