Related
Hey everyone,
this thread is for your videos and comments playing any game on your HD2 with FPSECE. I will post some videos time by time and i hope other support this thread too to show other others how nice the HD2 can be
Tekken 3
http://www.youtube.com/watch?v=GfGoa6jmTFk
MediEvil 2
http://www.youtube.com/watch?v=corgVPZlHcA
Quick guide
http://www.youtube.com/watch?v=63XAci8jDgg
How to exit FPSECE 0.10
http://www.youtube.com/watch?v=BVSdGQ69OcY
FPSECE 0.10 and HTC HD2 - Best Of playing Games
http://www.youtube.com/watch?v=fgiSFzd9kdo
FPSECE 0.10 and HTC HD2 - Install / Configure / Play - Complete HowTo incl BGP100 Gamepad
http://www.youtube.com/watch?v=Kb3MJAQMrCE
FPSECE 0.10 can be found on fpsece.net. The 0.10 is the newest version of the "First PlayStation Emulator for windows CE" (the one before is 0.96 - i know the version numbers are a bit squishy ...).
For information about how to set up FPSECE 0.10 go check i900frenchaddict on youtube. He has a lot of videos which help. But its for a TG1 so it might differ in some points. Maybe im going to record the same stuff for HD2.
In free version there is no G-Sen, Gamepad, Multitouch support for HD2
For the supporter version:
-Gsensor working with every HTC including HD2
-MSI BGP100 bluetooth gamepad working for the HD2 (and every device) without extra drivers
-The delay when you touch the screen is now fixed, no delay at all!
-Overlay in Tekken 3 are back!
-Multitouch is working now
Videos by i900frenchaddict:
G-Sen HowTo
http://www.youtube.com/watch?v=nOcvM8bHiZM
HD2 with MSI BGP100 (doesnt seem to run with every BGP100)
http://www.youtube.com/watch?v=_667zwB3nLE
Can you be a bit more specific about where we can find this emulator and about the games for it? I like it very much but I'm a bit noob to Windows Mobile so I will be glad to have a little more details on the subgect. Thanks in advance!
hey, no problem. i thought it was clear but i see i was wrong ... edit will follow in just a moment
hi, you can configure the the controls like video... you cn share the ini with congure?
in my HD2 the fpsece run but faults only the controls...
[zozi] said:
hi, you can configure the the controls like video... you cn share the ini with congure?
in my HD2 the fpsece run but faults only the controls...
Click to expand...
Click to collapse
Just read the manual or the other Fpsece thread; you need to configure the vol up and down button to play Tekken 3 because of the input delay.
Final Fantasy VII and VIII plays perfectly.
Go check http://www.youtube.com/user/i900frenchaddict especially http://www.youtube.com/user/i900frenchaddict#p/u/2/SVm1tg6H90Q. It helped me to understand how the setup works.
fpse.ini
[FPSE]
DisclaimerAgree=1
LastGPU=gpusoftdx.dll
LastSPU=0peopspu109.dll
LastJOY0=joy0pse.dll
LastJOY1=joy1key.dll
LastCD=cdrimage.dll
LastPAR=parnull.dll
CDCountry=1
UseOtherMDEC=off
CDUseCache=off
CDCacheSize=16384
CDStreamSpeed=0
CpuMode=on
CpuMode2=off
ShowGenCode=off
AutoSpeed=on
MDEC_bw=off
DisableEngines=off
DisableLogo=on
EnableHLE=off
EmuConsole=off
UseSubQ=on
CacheSubQ=off
BiosName=SCPH1001.BIN
RomName=SCPH1001.BIN
MemCard1=slot1.mcd
MemCard2=slot2.mcd
ArmCoreV5=on
ArmCoreMMX=off
UseSerial=off
ComPort=COM2
Verbose=off
Disasm=off
Debugger=off
EnablePCDRV=off
PCDRV_RO=off
CDDA2SPU=off
HideMouseCur=off
RunSPUsync=off
SmartChnRead=off
EnableDatel=off
IgnoreCdErrs=on
[PocketPC]
Onscreen_OC14=0
Onscreen_O14=0
Onscreen_14=0
Onscreen_OC13=0
Onscreen_O13=0
Onscreen_13=0
Onscreen_OC12=0
Onscreen_O12=0
Onscreen_12=0
Onscreen_OC11=0
Onscreen_O11=0
Onscreen_11=0
Onscreen_OC10=0
Onscreen_O10=0
Onscreen_10=0
Onscreen_OC09=0
Onscreen_O09=0
Onscreen_09=0
Onscreen_OC08=0
Onscreen_O08=0
Onscreen_08=0
Onscreen_OC07=0
Onscreen_O07=0
Onscreen_07=0
Onscreen_OC06=0
Onscreen_O06=0
Onscreen_06=0
Onscreen_OC05=0
Onscreen_O05=0
Onscreen_05=0
Onscreen_OC04=0
Onscreen_O04=0
Onscreen_04=1
Onscreen_H=3
Onscreen_W=5
Onscreen_OC03=0
Onscreen_O03=0
Onscreen_03=0
Onscreen_OC02=0
Onscreen_O02=0
Onscreen_02=0
Onscreen_OC01=0
Onscreen_O01=0
Onscreen_01=0
Onscreen_OC00=0
Onscreen_O00=0
Onscreen_00=5
Main_Volume=1
Da_Volume=1
Xa_Volume=1
Isos_PATH=\Storage Card\ROMS
GFXDRV=2
Orientation=0
FpsCount=on
EnableSound=on
Stretch_x=0
Stretch_y=0
Start_y=10
SoundVolume=10
PadType=1
FullScreen=1
Stick_Left=0
Stick_Right=0
Stylus_Wide=20
Sensor_Zx=700
Sensor_Gpz=127
Sensor_Mpz=200
Sensor_Npz=20
Sensor_Gpx=127
Sensor_Mpx=200
Sensor_Npx=20
Stylus_Mode=1
Sensor_Mode=0
[GPUSOFT]
Odd_Even_Fix=0
Busy_Fix=0
Lazy_Update_Fix=0
High_Res_Boot_Fix=0
Frame_Skip_Mode=0
[JOY0KEY]
AutoRotate=0
MultiFix_GunB=0
MultiFix_GunA=0
MultiFix_Left=16777344
MultiFix_Down=16777220
MultiFix_Right=524288
MultiFix_Up=4
MultiFix_Select=50331680
MultiFix_Start=33554464
MultiFix_Quadrangle=34078720
MultiFix_Triangle=33554448
MultiFix_Circle=34603008
MultiFix_Cross=50331664
MultiFix_L1=0
MultiFix_L2=0
MultiFix_R1=0
MultiFix_R2=0
MultiFix=0
Button8=0
Special8=0000000000000000
Button7=0
Special7=0000000000000000
Button6=0
Special6=1000000000000000
Button5=0
Special5=0000000010000000
GunB=87
GunA=81
Up=69
Down=88
Left=83
Right=70
Start=112
Select=113
Triangle=80
Quadrangle=76
Circle=8
Cross=13
L1=0
L2=86
R1=0
R2=66
Special1=1000000010000000
Button1=87
Special2=0010000010000000
Button2=82
Special3=0001000001000000
Button3=0
Special4=0001000010000000
Button4=79
[JOY1KEY]
Up=38
Down=40
Left=37
Right=39
Start=112
Select=113
Triangle=69
Quadrangle=83
Circle=68
Cross=88
L1=81
L2=87
R1=82
R2=84
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[SPUPeops]
UseXA=1
Volume=1
XAPitch=0
UseTimer=0
SPUIRQWait=0
DebugMode=0
RecordMode=0
UseReverb=0
UseInterpolation=0
DisStereo=0
UseDBufIrq=1
Click to expand...
Click to collapse
Tekken 3.ini
[FPSE]
DisclaimerAgree=1
LastGPU=gpusoftdx.dll
LastSPU=0peopspu109.dll
LastJOY0=joy0pse.dll
LastJOY1=joy1key.dll
LastCD=cdrimage.dll
LastPAR=parnull.dll
CDCountry=1
UseOtherMDEC=off
CDUseCache=off
CDCacheSize=16384
CDStreamSpeed=0
CpuMode=on
CpuMode2=off
ShowGenCode=off
AutoSpeed=on
MDEC_bw=off
DisableEngines=off
DisableLogo=on
EnableHLE=off
EmuConsole=off
UseSubQ=on
CacheSubQ=off
BiosName=SCPH1001.BIN
RomName=SCPH1001.BIN
MemCard1=slot1.mcd
MemCard2=slot2.mcd
ArmCoreV5=on
ArmCoreMMX=off
UseSerial=off
ComPort=COM2
Verbose=off
Disasm=off
Debugger=off
EnablePCDRV=off
PCDRV_RO=off
CDDA2SPU=off
HideMouseCur=off
RunSPUsync=off
SmartChnRead=off
EnableDatel=off
IgnoreCdErrs=on
[PocketPC]
Onscreen_OC14=0
Onscreen_O14=9
Onscreen_14=257
Onscreen_OC13=0
Onscreen_O13=10
Onscreen_13=259
Onscreen_OC12=0
Onscreen_O12=0
Onscreen_12=0
Onscreen_OC11=0
Onscreen_O11=0
Onscreen_11=0
Onscreen_OC10=0
Onscreen_O10=27
Onscreen_10=25
Onscreen_OC09=0
Onscreen_O09=11
Onscreen_09=260
Onscreen_OC08=0
Onscreen_O08=12
Onscreen_08=258
Onscreen_OC07=0
Onscreen_O07=0
Onscreen_07=0
Onscreen_OC06=0
Onscreen_O06=0
Onscreen_06=0
Onscreen_OC05=0
Onscreen_O05=0
Onscreen_05=0
Onscreen_OC04=0
Onscreen_O04=3
Onscreen_04=261
Onscreen_H=3
Onscreen_W=5
Onscreen_OC03=0
Onscreen_O03=0
Onscreen_03=0
Onscreen_OC02=0
Onscreen_O02=0
Onscreen_02=0
Onscreen_OC01=0
Onscreen_O01=0
Onscreen_01=0
Onscreen_OC00=0
Onscreen_O00=0
Onscreen_00=0
Main_Volume=3
Da_Volume=0
Xa_Volume=1
Isos_PATH=\Storage Card\ROMS
GFXDRV=2
Orientation=0
FpsCount=on
EnableSound=on
Stretch_x=0
Stretch_y=0
Start_y=10
SoundVolume=10
PadType=1
FullScreen=1
Stick_Left=2
Stick_Right=0
Stylus_Wide=20
Sensor_Zx=700
Sensor_Gpz=127
Sensor_Mpz=200
Sensor_Npz=20
Sensor_Gpx=127
Sensor_Mpx=200
Sensor_Npx=20
Stylus_Mode=1
Sensor_Mode=0
[GPUSOFT]
Odd_Even_Fix=0
Busy_Fix=0
Lazy_Update_Fix=0
High_Res_Boot_Fix=0
Frame_Skip_Mode=0
[JOY0KEY]
AutoRotate=0
MultiFix_GunB=0
MultiFix_GunA=0
MultiFix_Left=16777344
MultiFix_Down=16777220
MultiFix_Right=524288
MultiFix_Up=4
MultiFix_Select=50331680
MultiFix_Start=33554464
MultiFix_Quadrangle=34078720
MultiFix_Triangle=33554448
MultiFix_Circle=34603008
MultiFix_Cross=50331664
MultiFix_L1=0
MultiFix_L2=0
MultiFix_R1=0
MultiFix_R2=0
MultiFix=0
Button8=0
Special8=0000000000000000
Button7=0
Special7=0000000000000000
Button6=0
Special6=1000000000000000
Button5=0
Special5=0000000010000000
GunB=87
GunA=81
Up=69
Down=88
Left=83
Right=70
Start=112
Select=113
Triangle=80
Quadrangle=76
Circle=8
Cross=13
L1=0
L2=86
R1=0
R2=66
Special1=1000000010000000
Button1=87
Special2=0010000010000000
Button2=82
Special3=0001000001000000
Button3=0
Special4=0001000010000000
Button4=79
[JOY1KEY]
Up=38
Down=40
Left=37
Right=39
Start=112
Select=113
Triangle=69
Quadrangle=83
Circle=68
Cross=88
L1=81
L2=87
R1=82
R2=84
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[SPUPeops]
UseXA=1
Volume=1
XAPitch=0
UseTimer=0
SPUIRQWait=0
DebugMode=0
RecordMode=0
UseReverb=0
UseInterpolation=0
DisStereo=0
UseDBufIrq=1
Click to expand...
Click to collapse
Not sure if it helps but these are my *.ini's
How do I use these .ini files for my phone?
I have everything working on my HD2 but I battle to play the games because I cant configure the controls even with the help of the video's.
One question that I cant figure out is how to bring back the FPSE menu once you have activated the game in landscape? I have to pull out my battery and restart to "exit"...
stefanfuchsuk said:
One question that I cant figure out is how to bring back the FPSE menu once you have activated the game in landscape? I have to pull out my battery and restart to "exit"...
Click to expand...
Click to collapse
Tap the very top right hand corner of your HD2 screen to flip it back to portrait.
Note: Tekken 3 may bring problems in displaying the overlays of the onscreen buttons due to its specific patch (that can be removed but the game may be slower, see tekken3 in the gamelist file and see tekken3 config file if you want to try removing this patch)
So if you have difficulties in setting the overlays, don't try with tekken 3 at first, try any other game, Tekken 3 is the only one with that kind of overlay problem
(I would say a not too fast RPG is good to learn how to use the onscreen buttons. And once again, HD2 users will have to wait for Schtruck to work a little more to get fast and responsive onscreen controls since the capacitive screen and its bad compatibility with WinMo 6.5 has brought new problems including a big delay on the onscreen keys, that doesn't occure with a resistive screen)
The G sensor doesn't work on my HD2 ! Is there any plug in I have missed?
Its not a feature with the HTC HD2 yet.
I have driver 2 and wipeout working like a dream on my hd2, except the screen is far to sensitive and makes it impossible to drive.
Any settings to change this?
Why are there two threads on the FPSECE when most of the questions and replies in this thread are of the same type in the other thread?
basically this thread is for the gameplay showed in videos and for sure people will ask how it works if it doesnt for them.
later on i will give you guys a video of MediEvil 2 on HD2 but atm i still play with the setup. Hardware buttons doesnt have a delay but the game gets a bit laggy
Did someone get the G-sensor working?
nope, for gsen working under HD2 we have to wait for next version (ive read this somewhere, cant remember where).
See first post, ive added MediEvil 2 video
added a quick guide for those who really dont have a clue what to do with fpsece
FFVII is...not really working. The sound is cutted but the game speed is always at 61f/s.
But the big problem for me is the virtual pad. It responds very slowly and the multitouch isn't working at all.
I don't know if that because I don't have the good bios or else, but it's quite unplayable.
Someone have a clue ?
lets say it this way: there is no HD2 support at the moment but it will change soon. FPSECEs core is rewritten and there is support for the TG01 (g-sen) as far as i know. So 0.10 works much better than 0.96, so far i didnt have any problem to open a rom. my guess: still the problem is there are many different devices and this emulator depends on the hardware of a device (kind of screen, hardwarekeys, bluetooth for gamepads differs, etc.).
But somewhere on http://www.fpsece.net ive read about one of the guys of fpsece will get a HD2 soon and there will be support for it
Hum...I see, I misunderstand "multitouch screen" and "on-screen multi-touch button-assignment".
Then I'll wait for another release. FFVII will wait for me too ! ^^'
Straynart said:
Hum...I see, I misunderstand "multitouch screen" and "on-screen multi-touch button-assignment".
Then I'll wait for another release. FFVII will wait for me too ! ^^'
Click to expand...
Click to collapse
Why can't you just set some of your keys to toggle? Did this for FFVII and FFVIII and it works beautifully.
I'm looking for an Amiga emulator for my HTC HD2 with WM6.5.5 installed
Can't find anything that is recent that works on WM6.5 and/or WVGA
Anyone?! [^_^] TiA
h??p://pocketinsanity.org/web/pocketinsanity/Projects/PocketUAE
Interesting....
hasinasi said:
h??p://pocketinsanity.org/web/pocketinsanity/Projects/PocketUAE
Click to expand...
Click to collapse
Interesting site...
Cheers! \(^_^)/
hasinasi said:
h??p://pocketinsanity.org/web/pocketinsanity/Projects/PocketUAE
Click to expand...
Click to collapse
Thank you very much. I had come across the Pocket version of UAE, but an older version and was forward thinking enough to check 'sourceforge'.
The images look pretty good so far... downloading currently and will give it a try on the tube home... will have to look around for some legally free adf's on-line or whatever UAE uses to try it out, until I get home... where I have many stored on a DVD from the good old days.
Will update once I've given a try. Thanks again 'hasinasi' [^_^]
fazz said:
Thank you very much. I had come across the Pocket version of UAE, but an older version and was forward thinking enough to check 'sourceforge'.
The images look pretty good so far... downloading currently and will give it a try on the tube home... will have to look around for some legally free adf's on-line or whatever UAE uses to try it out, until I get home... where I have many stored on a DVD from the good old days.
Will update once I've given a try. Thanks again 'hasinasi' [^_^]
Click to expand...
Click to collapse
So! How did it go? I was the last Amiga owner among my friends i loved Amiga. Have you managed to get the Amiga running on you MoPhone?
interested in this...
I looked at the page and hmmm we can forget to use it on a non-stylus phone i think....
I tried this on my Athena and Universal
The emulator itself is pretty good but not without issues. For 640x480 devices there is no onscreen keyboard and the Leo/HD2 lacks a joypad so most games are going to be useless.
The Athena and Universal with their hardware keyboard were ideal for this emulator and I managed to play a few games quite well.
Some games like Frontier, Carrier Command, and Captive which are 99% mouse controlable should be playable using the stylus for mouse controls and speed should be good as well. Also a lot of the old music demos would be ok as well.
I shall give it a try at somepoint myself as I have one of those old Bluetooth joypads which I can try and use. will let you know how it goes if I get anywhere.
You can use LMTs multitouch gamepad as a dpad replacement. It is configurable and works in any app. It converts the input to keyevents. Have a look in the LMT thread for further details...
Did you guys get this to work on winmo 6.5?
I am not having luck with my tilt 2 so far.
Amiga Emulator Working Great for me with LMT controller
Pocket Ultimate Amiga Emulator is now working great for me on the old games I use to love. It runs at 640x480 and I use LMT v0.8x from this page of the LMT forum. http://forum.xda-developers.com/showthread.php?t=629263&page=74
Get the 'x' version of that controller I link to -- it's on the page I link you to in the first post, "LMT v0.8x", that version is great because it includes a '2 mouse button' controller as well as the full gamepad. These 2 buttons rest down at the bottom of the screen and are out of the way of the emulator. Because they are not sitting on top of the screen I can play my favorite 'mouse games' from the Amiga now, such as 'populous I and II', and 'powermonger' and 'lemmings'. My favorite games were the mouse games so the '2 button controller' is fantastic.
Please give it a try -- I find PocketUAE to be now functional with LMT v0.8x.
TIPS: gapi driver mode gives a 'touchpad style' mouse experience, and dbi driver mode is 'stylus style', so I'd practice with the mouse in gapi mode before trying point+click dbi. I have mine set for dbi 320x480 full screen left hand side rotation so I can use the 2 mouse buttons on left side of screen and point with my right hand fingers. Have fun and good luck!
For a great place to get disks of games, google up "the game archives roms emulators" and choose the first link.
Now I'm off to find dos emulators so I can try and make 'dungeon keeper' work with this 2 button controller version of LMT v0.8x
PS: don't just get lmt v0.8x for emulators, it has FULL GLOBAL MULTITOUCH GESTURE SUPPORT on any screen you are in on the hd2, and if configured properly you can do some amazing things that no other smartphone of our caliber can do. It can close a foreground app with a double finger swipe, which for gamers means NO MORE BATTERY PULLING TO GET OUT OF A GAME.... It floats OVER gapi which is strong stuff.
Hi... maybe this is no the correct site... but i have updated
iMAME4all site with the new iMAME4all Android port called MAME4droid
that I have been developing recently.
iOS iMAME4all is the best MAME mobile experience since iOS runs very
well iMAME. Android is very hard to deal with (performance) and till
Android 3.0 there is not HW 2D accelerated APIs.
Anyway... i think i have done a good job and with the correct HW...
MAME4droid is a very good experience.
Features:
Port of iMAME4all 1.9 for Android 2.1 and upper phone versions.
Native Support for Android honeycomb tablets.
Android 3.0 (Honeycomb) 2D Hardware Accelerated.
Autorotate. HW Keys remapping supported. Selectable hide/show touch
Controller. Smoothed image. Animated touch stick and more.
Some features still missing are: analog touch control, native wiimote (but you can use 3rd party apps on market) and overlays. The rest iOS features are
there.
I haven't published to market yet, as this is an early release and I'm waiting for comments and (hopefully very few) bug reports.
As a new user I'm not allowed to post links, so to download the apk, search for iMAME4all at google code site.
Maybe this is of interest to you or any of you friends.
I have a Acer Iconia A500 to test this with. Ill post my findings.
Link for others: http://code.google.com/p/imame4all/
Sent from my GT-P1000 using XDA Premium App
Thanks....let me know your findings.
I have published a b2...fixing a rotation bug...
Fantastic news. I tried it out and seems to be working great. Any possible chance to add support for wiimotes? I can't seem to get it to accept a key from it.
I am incorrect. It can work with wiimotes.
However, there is no way to change the the definition of keys for those of us without a physical keyboard.
Thanks a bunch for doing this work.
Fantastic work...had been hoping someone would pick this up.
Did some testing on my Galaxy 10.1 tab (Bonsai rom, 1.4gHz) and it went well with the few games I tried. On screen controls are a little sluggish but disabling the animated controls smoothed it out.
Please let me know if I can help with any testing. Will be watching this one closely.
So I have it loaded and it seems to run, but I have loaded several roms that are all on the list and all seem to fail. I get missing files for ever single one of the roms. Any clue as to why?
You mention that there isn't 2d hardware accel without honeycomb. Couldn't the 2d be drawn to a 3d layer? There are numerous hardware accelerated games on android 2.x
Yes I will do... But at first I wanted to do 2d engine, so buggy gles drivers were not a problem and supporting all kind of smartphones.
the 2d rendering is very good without filtering now...
how to make working roms? i tried several roms but without success..
Marcelo Henrique dos Sant said:
how to make working roms? i tried several roms but without success..
Click to expand...
Click to collapse
same here. it seems that most of the roms are missing files in the zip... I have verified that the same issue also happens in the desktop version of the same build this is made from. So not many roms seem to be working and the rom checker program doesn't fix any of them or I just don't know how to work it.
Sadly that port is not usable for me simply because the onscreen controls dont seem to work right. The analog stick doesnt center unless I lift my finger off the screen. Dead zone on/off doesnt change that. Is this actually supposed to be that way or is it a bug.
I use this on the subway a lot and I was wondering if others would find it helpful to have a quick pause feature. Maybe touch the middle of the screen to pause/unpause.
Just wanted to make that suggestion.
I really like this Mame port, fast, good looking and compatable with many games !
I found a full working romsets in the usual places (just check for mame gp32 romset).
I usually play using a wiimote or a gamepad (android 3.2 is great for that!).
BTW is there an option to enable more buttons on the virtual joystick ? As I have 4 in portrait mode, but only 2 in landscape one.
Also, do you plan to add 2 players support in the input settings?
Thanks for your hard work ! It's so nice to play those good old games on Android.
Can the "Mahjong electron base" game run on Android SYS?
I have the game source of mame for PSP
how to change it to run the mahjong electron base game on Android SYS?!
http://forum.xda-developers.com/showthread.php?t=1274215
running on galaxy s starts with buttons and a black screen. then android tells me app is not responding.
I ran this on my gtab 10.1 and it works GREAT!!! I use to use winmo and this is far better than any mame emulator i used there. Great work!!
Hello this is a good working emulator. But i was wondering if it is possible to change or create a conf file, to change the location of the roms folder.
Hi guys
As mame4droid will never support save state
i was thinking does anything know anyway of freeezing it i mean keep it running in the background, without having the android reset the emulators status after a while in the background
that way rather than save state we could resume it and open up from the background and resume our games that way(bit like the xperia play emulator resume method).
i've tried other mame emulators they support save state but dont support dip switches this is pointless as i always like upping the difficulty in my games. mame4droid allows this.
p.s i already tried freezing mame4droid with titanium backup,
no joy
after unfreezing the app resets itself and u lose your rom status.
any help is much appreciated.
Dosbox Turbo was just updated to allow Xperia Play button mapping / screenshot of the new mapping page attached
FTAiii said:
Dosbox Turbo was just updated to allow Xperia Play button mapping / screenshot of the new mapping page attached
Click to expand...
Click to collapse
SWEET....... now... time to fire up WING COMMANDER...... HAHAHAHAHA
...If this works as it should there are some amazing possibilities here.
It doesn't seem to allow for different mapping profiles for different games, just 1 generic mapping, but agree - lots of possibilities !
I'm gonna go work up some mappings for Ultima IV !
Ahh i tried to search for people discussing this and i didn't find anything and posted a topic lmao... some1 shared the link to here.
$2.99 tempting. Now while Wing Commander was already said.. Ill say another that I could see myself playing..
Shufflepuck Cafe and Bar Games!
Hrm.. Install Win95.. yes this could have some options..
Just bought it myself
been playing
commander keen
jill of the jungle
sim city 2000
monster bash
castle of the winds
daggerfell
Does this mean you could play Daytona USA on the xplay?
I remember playing Daytone USA in DOS mode back in the day.
Ok with the on screen mouse, I just got done playing Nukewar (Fun fun game)
Playing Bargames right now. Need to map the X to be the enter button.
Also learned the option use the dpad as an input toggle is worth using. Easier for those up down left rights in the game.
Profile mapping WOULD be nice.
Edit: Ok one flaw in this program.. How on earth can I map the space bar or the enter key to a button...? So many games play like this.
Could someone check Sensbile World Of Soccer 98, Manchester United The Double and Lous 1,2,3 ? How does it works ? I thinking about buying this emulator.
TheVicious said:
Could someone check Sensbile World Of Soccer 98, Manchester United The Double and Lous 1,2,3 ? How does it works ? I thinking about buying this emulator.
Click to expand...
Click to collapse
So far, every game I have tried worked without config. Also Any GoG game that uses dosbox works. (Oooo I forgot.. I can play Dungeon Keeper on android now)
ONLY issue I have seen be meh, is that I cant map enter or spacebar to a gamepad key. Also has sometimes an issue with screen rotation. (Gets stuck in landscape mode sometimes when I NEED it vertical while I type on keyboard) Minor gripe, but so far its solid.
Just contacted the dev of dosbox turbo with the comments from this thread. He said the ability to map enter and spacebar will be in the next release. Also I asked about the possible profile loading for those who needs "x" mapping for "x" game.
Oh god, if this thing can actually run daggerfall fullspeed I'm gonna cry. Did anyone try that? How does it run? And what about the controls? On andosbox it ran really slow, and I couldn't get some of the controls to even work.
Interesting, Managed to get a Windows 95 image booted, it crashed the explorer.exe but still started up.. http://vogons.zetafleet.com/viewtopic.php?t=24936 to make your own win 95 image (if you dont just download a predone one)
This really is starting to look good. =D
Hello Everybody,
I'm the author of DosBox Turbo. One of the members here kindly pointed out this thread to me today and suggested I drop by.
Wanted to let you know that I'm sorry for leaving out the "Enter" and "Space" mappings, it just slipped my mind! But, the good news is, I'm finishing up a quick bugfix release (v1.2.1) and some of the new Xperia Play specific features I already have completed include:
Ability to map Enter & Space to an Xperia Button
Ability to see what current button mappings are w/o having to select each one.
Once I'm finished testing this release, I'll push it out to the Android Market (sometime on Mon or Tue).
I'd be very interested to hear your feedback/suggestions for new features, as I do not have an Xperia Play, so I'm just coding this stuff up without really having a chance to test it. Some of the new features I have planned for the very near future include being able to use the Analog touchpad on the Xperia Play as a true analog joystick, as well as supporting saving button/configuration profiles.
Cheers,
Gene
Thanks for taking the time to drop in and let us know what you have in the pipeline, i actually just bought your app earlier today and have been playing raptor call of shadows, im also looking around for other dos classics i missed when i was younger, the games i would never probably bother with on a pc haha.
the suggested improvements are pretty much everything i could ask for off the top of my head, keep up the good work.
Gene.. Question, Can one do a Ctrl+Alt+Del? Also later down the road, a "windows" key could be good.
Been fiddling with this booting of Windows 95 lol. Another thing that could be nice is a "reset dosbox" option in menu vs "exit" and reloading.
Mysticales said:
Gene.. Question, Can one do a Ctrl+Alt+Del? Also later down the road, a "windows" key could be good.
Been fiddling with this booting of Windows 95 lol. Another thing that could be nice is a "reset dosbox" option in menu vs "exit" and reloading.
Click to expand...
Click to collapse
As far as I'm aware, DosBox proper doesn't support a reset function or CTRL-ALT-DEL (correct me if I'm wrong). I did a bit of research on this, and it seems to be somewhat difficult to implement (reference this thread over in the DosBox forums) for various reasons. On Android, it would be possible to kill the app and restart it via a button, but it wouldn't be much different than hitting exit and starting over. I'll look into a way of cleanly implementing such a feature in a future version if you guys feel it would be beneficial.
By the way, there is a thread over on the ASUS transformer forums with some people having success running Windows 95/98. I also recorded a video of an old version of DosBox Turbo running Windows 95. I apologize in advance for the poor video quality and lack of sound (I was using an old camera phone to record it).
Edit: I forgot to answer your Q. about the windows key. I'll add the windows key for you extreme users running Windows. =)
[post deleted]
Mael5trom said:
Thanks for taking the time to drop in and let us know what you have in the pipeline, i actually just bought your app earlier today and have been playing raptor call of shadows, im also looking around for other dos classics i missed when i was younger, the games i would never probably bother with on a pc haha.
the suggested improvements are pretty much everything i could ask for off the top of my head, keep up the good work.
Click to expand...
Click to collapse
Sure! Happy to drop in an answer some questions. I'm a big RTS Fan (Warcraft II, etc). In case there are any other RTS fans here, I can certainly recommend playing Warcraft II and set the Mouse Tracking mode to "absolute" and in the Gesture Configuration map the Double-Click to "right click". This will allow you to tap once for left click, and double-tap for rightclicks to move units. Long Press and drag your finger to highlight units. Makes playing RTS games very comfortable on the Touchscreen alone.
iCade is the Mini-Arcade Cabinet with Bluetooth arcade Controls. I bought it to use with Mame games, which supports it directly. However, almost every other game didn't work with it.
Finally I found a solution via the app "GameKeyboard". It lets you map the icade controller and buttons so they emulate a normal Joystick or D-pad. It also let's you map the controller to games that only allow "on screen" touching, but I haven't played with that much yet.
Here's a videos showing my iCade working with ZenPinball HD, RipTide, and Reckless Getaway.
http://youtu.be/-8RBHLxasTo
Required:
- Rooted Android Device
- 'GameKeyboard' by locnet, configured properly (can be confusing without guidance)
- iCade cabinet/controller: Currently $60 on Amazon.
ps. If any interest is shown, i'll write up a doc on how to configure GameKeyboard for use with the iCade. It took some getting use to.
pss. Questions welcome..and I can test it on specific games if you want..if they have a free version.
psss. The support team at GameKeyboard really came through with adding iCade support for me within a day of the request, which is why I'm spreading the word.
really like it
ps. If any interest is shown, i'll write up a doc on how to configure GameKeyboard for use with the iCade. It took some getting use to.
pss. Questions welcome..and I can test it on specific games if you want..if they have a free version.
psss. The support team at GameKeyboard really came through with adding iCade support for me within a day of the request, which is why I'm spreading the word.
Click to expand...
Click to collapse
Yes I am very interested
I got it working thrue bluezIME.apk. Dont know exactly what i did wrong before but whit this apk it worked en paired
https://code.google.com/p/android-bluez-ime/issues/detail?id=112
Keesjansma2 said:
I got it working thrue bluezIME.apk. Dont know exactly what i did wrong before but whit this apk it worked en paired
Hi everyone. Hoping to resurrect this thread. I picked up on ion Icade recently and I have a spare 10" tablet running Android 6.0 Marshmallow. If I read this thread correctly, it sounds like I can download the latest bluezIME.apk and get many of the Google Play games to work with the Icade via controller emulation? Would I need to jailbreak the tablet? Wondering if someone can confirm this for me.
Also, seems like at the very least Mame should work natively with the Icade, no special hacks or anything needed right?
Thanks!
Click to expand...
Click to collapse
I know this is a quite old topic, but since I'm getting an iCade Core, I may assume the following:
1) BluezIME doesn't use root, but GameKeyboard by locnet does, according to sbliner.
2)MAME4All and MAME4droid does support the iCade, but I'm not really sure if you need BluezIME because of Android 6 or above.