How do I do this? Tried searching, but didn't have any luck.
Thanks!
Xerxes321 said:
How do I do this? Tried searching, but didn't have any luck.
Thanks!
Click to expand...
Click to collapse
You could always change your pri back to the BAD one lol
regaw_leinad said:
You could always change your pri back to the BAD one lol
Click to expand...
Click to collapse
ROFL ROFL Werd to this option.
PRI doesn't have anything to do with what is displayed on the Lockscreen.
Xerxes321 said:
PRI doesn't have anything to do with what is displayed on the Lockscreen.
Click to expand...
Click to collapse
You are wrong. Sort of. PRI doesn't control what is displayed but the lockscreen displays the operator. And if the operator is unknown because of a wrong PRI then it's not displayed there. But they were joking as that's not the best fix.
It requires some xml hacking. I had no problem doing it on 1.5. Shouldn't be a problem. I'll look in to it.
flipzmode said:
You are wrong. Sort of. PRI doesn't control what is displayed but the lockscreen displays the operator. And if the operator is unknown because of a wrong PRI then it's not displayed there. But they were joking as that's not the best fix.
It requires some xml hacking. I had no problem doing it on 1.5. Shouldn't be a problem. I'll look in to it.
Click to expand...
Click to collapse
You could add the option to remove operator from the lockscreen to your kitchen (which btw is amazing!)
flipzmode said:
You are wrong. Sort of. PRI doesn't control what is displayed but the lockscreen displays the operator. And if the operator is unknown because of a wrong PRI then it's not displayed there. But they were joking as that's not the best fix.
It requires some xml hacking. I had no problem doing it on 1.5. Shouldn't be a problem. I'll look in to it.
Click to expand...
Click to collapse
What .apk would it be in?
Here's what I'm working on... My name is at the top and Sprint is overlapping with it. Trying to get rid of 'Sprint' on the lockscreen.
Xerxes321 said:
Here's what I'm working on... My name is at the top and Sprint is overlapping with it. Trying to get rid of 'Sprint' on the lockscreen.
Click to expand...
Click to collapse
dude that lockscreen is what i've been looking for..
anychance that when you get it done you and hook me up with it? with my name.. Adam
that would rock
even if you can make it without my name it'd be cool..heck i would even like the one that says sprint.
It can easily be removed with QPST, just go to the display tab in the service programming menu, and change the banner, and write to phone.
nofxdan said:
It can easily be removed with QPST, just go to the display tab in the service programming menu, and change the banner, and write to phone.
Click to expand...
Click to collapse
For whatever reason, QPST can't see my phone with Android 2.1. I thought it worked with 1.5. I put the phone in diag mode, but the transfer for send/receive both stay at 0.
Related
Hi Guys,
I was wondering if that possible to change vibration pattern for HTC tytn 2 ?
It is really annoying that the vibration keeping vibrate continueing. It would be nice if it can change to like Nokia.....
You would probably get a better answer if you posted this in the general thread.
I use phonealarm and it lets me change the vibration settings. I dont know any other way to change it.
-McMex
I think you can change the registry to do this.
But I am not exactly know how to do
I only know in HKCU\ControlPanel\Sounds\RingTone0\Script, v0 means the vibration becomes non-stop. So I think it is possible if put the repeat command in here to get the result as you want!
chun_hk said:
I think you can change the registry to do this.
But I am not exactly know how to do
I only know in HKCU\ControlPanel\Sounds\RingTone0\Script, v0 means the vibration becomes non-stop. So I think it is possible if put the repeat command in here to get the result as you want!
Click to expand...
Click to collapse
No, it cant be changed from non stop vibration via this registry.
I added a screen shot of the setting you can choose from in my earlier post.
-McMex
mcmexican said:
I added a screen shot of the setting you can choose from in my earlier post.
-McMex
Click to expand...
Click to collapse
This is one thing(to use phonealarm), and there is also mortscript called treovibe that can change the vibration.
Mikulec said:
This is one thing(to use phonealarm), and there is also mortscript called treovibe that can change the vibration.
Click to expand...
Click to collapse
Yeah I know others can I was just showing him the options in phonealarm. I had never even heard of treovibe.
-McMex
mcmexican said:
Yeah I know others can I was just showing him the options in phonealarm. I had never even heard of treovibe.
-McMex
Click to expand...
Click to collapse
treovibe is good if u just want to change the vibration. Although u need to have installed mortscript.
mcmexican said:
You would probably get a better answer if you posted this in the general thread.
I use phonealarm and it lets me change the vibration settings. I dont know any other way to change it.
-McMex
Click to expand...
Click to collapse
Thanks McMex.... work fine for me. I have attached the program for those who may need it. Just rename the keygen.zip to keygen.exe
sexyman said:
Thanks McMex.... work fine for me. I have attached the program for those who may need it. Just rename the keygen.zip to keygen.exe
Click to expand...
Click to collapse
Edited your post. Do not post Keygens / Serial numbers.
This is your first and last warning!
there also used to be an option of adjusting how phone rings in some Advanced Config settings, but It is not there in the new v3.3
Does anyone know how to add that option back in?
Mikulec said:
This is one thing(to use phonealarm), and there is also mortscript called treovibe that can change the vibration.
Click to expand...
Click to collapse
Good call, I downloaded TreoVibe, and actually really like the vibe style it provides. I highly recommend it.
Cheers.
mcmexican said:
I added a screen shot of the setting you can choose from in my earlier post.
-McMex
Click to expand...
Click to collapse
Thanks for the software "PhoneAlarm". However, it doesn't work perfect..most of the ring+vibration patterns don't work..say "vibrate, flash, then ring" never work...In addition,when changing profiles, no ring tone when sms come in..I believe it has some conflics with the phone alarm settings..please help.. i am using PPC phone under WM6.0..thx..
Try this one very nice
Here's another alternative:
VAlert http://forum.xda-developers.com/showthread.php?t=437279
mamdouhn said:
Try this one very nice
Click to expand...
Click to collapse
It doesn't work on my WM6.0 cellphone...It says can't install..please help..
Spawnaston said:
It doesn't work on my WM6.0 cellphone...It says can't install..please help..
Click to expand...
Click to collapse
I think u need to have installed mortscript.
mamdouhn said:
I think u need to have installed mortscript.
Click to expand...
Click to collapse
i have installed MortScript, but then I try install TreoVibe, it's still problem in installing...what i misss????please help..
Mayb this is what you search:
http://forum.xda-developers.com/showthread.php?t=437279
EnsconcE said:
Mayb this is what you search:
http://forum.xda-developers.com/showthread.php?t=437279
Click to expand...
Click to collapse
Thanks for yr advice.. I did try Valert..nothing work too..I tried PhoneAlarm too..still nothing work...very depressed...HELP..
Using DC v2.06. I have a clear lockscreen, as shown below. Right now the notifications come up transparent (missed call, etc) at the bottom of the screen. With the clear lock, it's very heard to read the text. Hence why I added the extra black bar at the bottom of the phone, to make them readable.
However, that bar is ugly at the bottom! Is it possible for someone to figure out a way, through the xml file, to add a black shadow to the white notification text, so that it will still be readable with a clear lockscreen? See the default date/time text on the default lockscreen for an example of what I'm after.
Any assistance is greatly appreciated! Thanks!
Xerxes321 said:
Using DC v2.06. I have a clear lockscreen, as shown below. Right now the notifications come up transparent (missed call, etc) at the bottom of the screen. With the clear lock, it's very heard to read the text. Hence why I added the extra black bar at the bottom of the phone, to make them readable.
However, that bar is ugly at the bottom! Is it possible for someone to figure out a way, through the xml file, to add a black shadow to the white notification text, so that it will still be readable with a clear lockscreen? See the default date/time text on the default lockscreen for an example of what I'm after.
Any assistance is greatly appreciated! Thanks!
Click to expand...
Click to collapse
You mean like this .
When no notifications:
Missed call:
Press while screen locked:
I applied a black background, 50% transparent, that will only appear when a notification message exists.
Replace the attached in your 'layout' folder and you are good to go (removed the .txt extension).
JsChiSurf said:
You mean like this .
When no notifications:
Missed call:
Press while screen locked:
I applied a black background, 50% transparent, that will only appear when a notification message exists.
Replace the attached in your 'layout' folder and you are good to go (removed the .txt extension).
Click to expand...
Click to collapse
YOU STOLE THAT FROM ME!!! hahaha Good work!
VinceOB said:
YOU STOLE THAT FROM ME!!! hahaha Good work!
Click to expand...
Click to collapse
Did you do that? I honestly didn't know! Credit to VinceOB for doing it first!
JsChiSurf said:
Did you do that? I honestly didn't know! Credit to VinceOB for doing it first!
Click to expand...
Click to collapse
hahaha Actually, in that particular .xml I made everything transparent.
VinceOB said:
YOU STOLE THAT FROM ME!!! hahaha Good work!
Click to expand...
Click to collapse
Wouldn't have wasted my time looking into if I knew you put it out there! Nice job
VinceOB said:
hahaha Actually, in that particular .xml I made everything transparent.
Click to expand...
Click to collapse
Everything transparent is basically the completely clear lockscreen, the above adds the shadow for when notifications appear, so that the text is more readable.
JsChiSurf said:
Everything transparent is basically the completely clear lockscreen, the above adds the shadow for when notifications appear.
Click to expand...
Click to collapse
Yea I know, I didnt do the shadow part. I was pulling a you know who...hahaaha
VinceOB said:
Yea I know, I didnt do the shadow part. I was pulling a you know who...hahaaha
Click to expand...
Click to collapse
Lol . 10chars
JsChiSurf said:
Lol . 10chars
Click to expand...
Click to collapse
That deodex didnt go so well...LOL Ive decided to move on to some .xml's... LOL
VinceOB said:
That deodex didnt go so well...LOL Ive decided to move on to some .xml's... LOL
Click to expand...
Click to collapse
Still want me to send you a link? As mentioned, it should only be necessary to get a booting ROM, to do your work, then convert back. Let me know.
JsChiSurf said:
Still want me to send you a link? As mentioned, it should only be necessary to get a booting ROM, to do your work, then convert back. Let me know.
Click to expand...
Click to collapse
yea send it...
JsChiSurf said:
You mean like this .
....
Replace the attached in your 'layout' folder and you are good to go (removed the .txt extension).
Click to expand...
Click to collapse
Awesome. Thank you so very much! I'll have to try this in the morning.
I seem to be having a problem that I didn't notice before using this...
When my alarm goes off, I can't disable it from the lockscreen. I have to unlock my phone before I can shut off the alarm.
JsChiSurf, could you let me know if you have the same issue? I'm not saying 100% sure that this is what caused it, but it's the only change I've made recently.
Thanks!
How are you guys editing the .xml files?
seyer0686 said:
How are you guys editing the .xml files?
Click to expand...
Click to collapse
Good question, the files are in some odd format that I do not know how to work with.
Nanan00 said:
Good question, the files are in some odd format that I do not know how to work with.
Click to expand...
Click to collapse
The XML files are compiled binaries. You have to use a hexeditor to modify / patch the locations in the binary you wish to change.
Is anyone else having the alarm issue with this? I have to unlock my lockscreen in order to turn off the alarm.
Hey guys. It seems like in the thread merging of the various theme threads, the white taskbar that I used to be able to find for 2.1 has gone missing. If anyone has it, could they post it up here? It's the white one that looks exactly like vanilla... I don't mind if it has 3G text or EvDo text either.
EDIT
I should mention that this is regarding Damage Control or Fresh... not Legend roms.
mrinehart93 said:
Hey guys. It seems like in the thread merging of the various theme threads, the white taskbar that I used to be able to find for 2.1 has gone missing. If anyone has it, could they post it up here? It's the white one that looks exactly like vanilla... I don't mind if it has 3G text or EvDo text either.
EDIT
I should mention that this is regarding Damage Control or Fresh... not Legend roms.
Click to expand...
Click to collapse
Don't know if this is the one you are looking for or not. It contains more than just the taskbar, but you can certainly use as a starting point / modify accordingly.
http://forum.xda-developers.com/showpost.php?p=6069283&postcount=1912
JsChiSurf said:
Don't know if this is the one you are looking for or not. It contains more than just the taskbar, but you can certainly use as a starting point / modify accordingly.
http://forum.xda-developers.com/showpost.php?p=6069283&postcount=1912
Click to expand...
Click to collapse
Aaah you found it!! Thanks I can just remove the launcher and stuff from it. Thanks again!
EDIT
Do I have your permission to use it in a ROM that I'll put out eventually?
mrinehart93 said:
Aaah you found it!! Thanks I can just remove the launcher and stuff from it. Thanks again!
EDIT
Do I have your permission to use it in a ROM that I'll put out eventually?
Click to expand...
Click to collapse
Of course you do. Fire away...
I'm not an Android or Java guru, so I'm sure there's probably a better way to do this, but it works...
This is an update.zip which has a modified Phone.apk and Contacts.apk in order to allow the user to add an unknown number in the call log to the Blacklist.
As usual with this stuff make a backup first.
And of course I take no responsibility for anything.
For CM-5.0.8
BlacklistFromCallLog-eclair-signed.zip
For CM-6.0.0RC1
BlacklistFromCallLog-signed.zip
with working accept/decline sliders
BlacklistFromCallLog-slide-signed.zip
For CM-6.0.0RC2
BlacklistFromCallLog-6.0.0rc2-signed.zip
and the diff against cm-6.0.0rc1
blacklist_diffv2.txt
github
Nice find/build. The diff file is not there
stlouie65 said:
Nice find/build. The diff file is not there
Click to expand...
Click to collapse
hmmm. It shows up whien I click it. Here it is again though.
Thanks, now one more question, where do I put the diff file
stlouie65 said:
Thanks, now one more question, where do I put the diff file
Click to expand...
Click to collapse
You don't need the diff. It's just if you want to compile it yourself or see the source code.
Oh, ok, thanks for the MOD
Thanks for this, I've been wanting exactly this for a while now-it only makes sense. I hope cyan or other devs take note of this and incorporate it into their roms, to keep up with newer releases of the phone/contacts.apk's that they use.
Sorry if this is a little off topic but i figured you could take a look at it since you're already poking around... but does anybody notice that the blacklist clears itself after each reboot? its a little frustrating readding the numbers all the time
jon6206 said:
Sorry if this is a little off topic but i figured you could take a look at it since you're already poking around... but does anybody notice that the blacklist clears itself after each reboot? its a little frustrating readding the numbers all the time
Click to expand...
Click to collapse
I don't have this problem on my g1 or slide.
I pulled the links. Apparently it breaks the ability to answer the phone
I'll look at at when I get home from work.
cant wait for update :fingers crossed:
File has been removed from the server....
Can you please re-upload this file or attach it to the OP?
Thanks
Bert
I finally got around to looking at it. Apparently the problem was not with my changes, but somewhere in my build environment.
Essentially whether I build the phone app with or without the changes, I am losing the onscreen answer/decline sliders. Gonna have to look into that because I am using a slide which lacks the hardware answer button rendering my phone app unusable to me.
So since it does actually work, Here is the new diff. It is essentially the same but with a few code cleanups. I am going to hold off on posting the apk's however until i figure out why i'm losing the onscreen sliders. If anyone knows, please let me know.
blacklist_diff_v2.txt
I don't have the sliders in stock CM6. But, I'm on a dream/G1.
GinoAMelone said:
I don't have the sliders in stock CM6. But, I'm on a dream/G1.
Click to expand...
Click to collapse
Well gee, guess i lived up to my name yet again. I updated the OP with the update.zip and diff.
working accept/decline sliders
this version has the accept/decline sliders working.
BlacklistFromCallLog-slide-signed.zip
added version for cm-5.0.8 to first post
hi, im retarded.
what do i do with blacklist_diff_v2.txt ?
p.s. lv ur work..keep it up
is this a straight flash or do i need to unzip and adb push?
thanks
freaktractor said:
is this a straight flash or do i need to unzip and adb push?
thanks
Click to expand...
Click to collapse
You can flash it.
fit333 said:
hi, im retarded.
what do i do with blacklist_diff_v2.txt ?
p.s. lv ur work..keep it up
Click to expand...
Click to collapse
Nothing unless your compiling your own roms.
How can I change the carrier name on my Sensation? FWIW I'm running Android Revolution HD rom.
isgaard said:
How can I change the carrier name on my Sensation? FWIW I'm running Android Revolution HD rom.
Click to expand...
Click to collapse
Hmm, never thought about this. Isn't it just broadcast by the carrier directly ? I know when I've been abroad it changes to a local carrier.
Why would you want to ?
gol_n_dal said:
Why would you want to ?
Click to expand...
Click to collapse
I just don't want my carrier's name to show up on the lockscreen or the notification bar. Why be constantly reminded who your carrier is?
I've tried carrier name app but that didn't work.
I think this can be changed in the xml files in framework or system ui apks...not sure...to the archives a.k.a. Google!
Sent from my MB855 using xda premium
Have you tried uot kitchen? I havent used it on the sensation yet, but i was able to modify what was in the status bar to say what i wanted when i tried it on my vibrant. It might be worth a shot! I might go try it myself now that i am thinking about it......
isgaard said:
I just don't want my carrier's name to show up on the lockscreen or the notification bar. Why be constantly reminded who your carrier is?
I've tried carrier name app but that didn't work.
Click to expand...
Click to collapse
Ahh, you want to hide the carrier name, not change it to another carrier.
Id also like to know about this, having your name instead of your carrier is much better, its like a bit of free advertising for them, iPhone users can do it so im guessing someone on the android can make it happen, I think its broadcast but the phone will have the option to write what it likes, just a case of finding it.
Don't know about changing it to something else, but you can get rid of it. Go to UOT, mod carriers name to be 0% Opacity, done.,
tinky1 said:
Don't know about changing it to something else, but you can get rid of it. Go to UOT, mod carriers name to be 0% Opacity, done.,
Click to expand...
Click to collapse
Tried that, only works on the notification bar, but it killed the extended quick settings, plus the carrier name still shows up on the lockscreen.
Tried carrier name app with MIUI rom and it worked. For some reason that app doesn't work on any of the sense roms I've tried (Android Revolution, Pyramid3D0.
i wanna try the carrier name app? is it in the market? i tried searching for it but doesnt show up, anyone mind UPing it here