Related
Hi there,
My currently installed Rom was RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe. (thank you jester for you good job)
Nevertheless, this ROM is in English and I wanted to downgrade to a French One before the selling of my device.
I have tried to install the downgrade kit detailed in this topic : http://forum.xda-developers.com/showthread.php?t=267344
The first step went OK but while trying to make the secnd step, my qtek is blocked at the boot splash screen showing the Jesterz picture and red information about the SPL and so on on the upper left corner... without starting... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....
Don't worry, its nowhere close to being dead. If you have superCid, then use the SD card image to restore in bootloader mode. However, if the Cid is locked, then you would need a utility that can unlock Cid without Activesync mode (coz in your case, you would not be able to get an Activesync connection). imei-check.co.uk has a utility ($38 i guess) that unlocks Cid in bootloader.--- else show it to a professional. (in my country, I would have to shell out around $20 to get such a problem fixed at a mobile repair shop)
illanz said:
... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....
Click to expand...
Click to collapse
Just take out the battery for about 10 minutes and re-insert. If it does not re-start, do a soft resert with the stylus and hopefully you should be fine
Hy,please help!
after downgrade, it doesnt work anymore.... i mean... i cant start the mobile!
after the downgrade i disable the USB data cable and now the mobile is dead... it doesnt starts from the ON/OFF Button and even if i connect the USB cable it makes nothing! No Led on... nothing! absolutly DEAD!!!
I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !
Try this in order to reach the bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and KEEP PRESSING camara button till appear the Boot Loader.)
it doesnt work
I seem to have a simular problem. this is my post in another topic. It seems to fit better here.
This is what I tired so far:....
I used the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID and it often hangs and was slow with Push Email over GPRS.
I tried to find a way to downgrade but hadn't had time sofar. When I logged on XDA Developers Site I saw there was a new Image.
So I thought Great I dont need to find how to downgrade.
I don't know what G4 and G3 is so as everybody let's try the higest best one.
I uploaded the RUU-Prophet-G4-AKU3.3-Jester-b1
Wrong...
Now as previously stated I get to the multicolor screen with IPL 2.09 and the SPL 2.20..0001 on the screen and that's it.
I can get to the bootloader and load the same image again and get the same result.
I can load another image on and it loads to 80 Percent and says error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file.
If I try an older Version it tells me upgrad only
And when I try to upload the G3 version it tells me error[300] invalid upgrade tool. This upgrade utility canot be used for your PDA Phone. Please get newer Upgrade utility.
Trying to use the nf.nbf or the G3 with the ROMUpdateUtility_NoID of the G4 doesn't work either.
If I would like to do the downgrade tool I need a Active Sync connection which I don't have.
I have no more thoughts. Please Help.
If you would have just read the forums better you would have known if your device is a G3 or a G4. (read this!).
Now it appears you have tried both for an update. Which may possibly have bricked your phone.
But... first things first. Can you get into the bootloader? (read wiki HERE on how to do that).
If you can still get into the bootloader then there is still a possibility for updating.
Try upgrading with the latest Qtek rom (note: this is an official rom, this one works for both G3 and G4! And since it's the latest you should be able to upgrade to this one).
Instructions quoted from another post of me:
You could try the 2.20 qtek rom which seems to be working well for quite some people (found here).
Although you have to make sure you read that thread good and use the ROMUpdateUtility_NoID.exe (found here ) to upgrade.
Update instructions:
1: With the qtek 2.20 rom you need to extract the zip and the exe file in the zip with WinRAR.
2: Then there is one folder called 'OutputFile' and a folder called 'RUU_TOOLS'.
Inside the RUU_TOOLS there is prophet and in that one WWE, when you go through them and in the WWE folder you see a bunch of files (readme.doc, enterbootloader.exe etc etc).
You need to copy ROMUpdateUtility_NoID.exe to the WWE folder with all the files. And you also need to copy the 'nk.nbf' file to the WWE folder (from the 'OutputFile' folder).
3: And then you need to put your phone in bootloader mode and run ROMUpdateUtility_NoID.exe to upgrade, which should work nicely then.
Click to expand...
Click to collapse
This should give you a good enough idea of what to do. This should work (new rom combined with no NoID updater).
However, if it's impossible to get yourself into the bootloader your options of upgrading your device are getting smaller.
Downgrading of a complete rom is only possible on a CID unlocked G3 (when it's CID unlocked you would know! because you would have done that yourself) and not on a G4 device.
Flasing a G3 device with a G4 rom or G4 device with a G3 rom might possibly turn your phone into a brick. This can easily be avoided by reading the forums properly and know what you are doing.
If anything (even if it's a small thing) is not completely clear to you about upgrading/downgrading your device I'd recommend not doing so.
edit: oh yeah... if you have a G4 device (which you should know by now) you cannot downgrade from this rom (well, only via a payed online service). And when you have a G3 device you could try and CID unlock it (read wiki + forums) before you want to downgrade, or don't downgrade at all.
But whatever you do, don't try to downgrade it without doing any of those things because you'll get into trouble. (to put it down bluntly)
illanz said:
I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !
Click to expand...
Click to collapse
If you have reached the bootloader screen, just run my installer (or any official ROM) to get your phone working again.
My Prophet Died
I need help, to restore my Prophet, i upgrade wrong rom, i need will try the SD Backup, where can i see this process ?
Sorry my Inglish is too bad.
I've merged a couple of threads under this one, as they are all about the same problem (mostly)
Opening a new thread for the same problem isnt very useful
Hi RaptorRVL
Thank you very much for your patience in resuming all this for me.
I do try to read the forum but it isn't like a manual where you find the procedure stepby step. Like the G3 and G4 version I have newer come across until now. Sorry.
I tried the image you metioned and I have the result that at 80% it tells me error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file
Any more thoughts?
As you seem to be an expert Can you let me know more about goldcard solution.
Cheers
Mick
From a readme I once found inside an update:
* ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Doesn't sound too good really. Maybe someone else here on the forums know what to do with this error :/
You did use the ROMUpdateUtility_NoID.exe and not the normal updater right? Can remember someone getting a similar error when using the wrong updater, but I'm not sure about that though...
edit: try doing a search on the prophet forums for "INVALID COMMAND" maybe there is a helpful post in there somewhere...
THANKS!! I was worried b/c i had the same problem today. I've been looking for so many threads abt this problem. Thanks for ur help guys!
same problem
so i have the same problem. I want to downgrade and it break at 95% invalid file. But now XDA is still alive. I can`t go into the bootloader but i tried this file: RUU_Prophet_220734_2207114_024721_NVID.exe
and now my Prophet is still running again. Hope i can help you. Good luck.
peter paul
P.S. sorry for my english, but its good to learn it again
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
Hello guys ..I know it's my first thread and it's kind of mean to ask for a favor from the first time.
but here's what happened .
I have an official windows Mobile 6.1 downloaded from the official htc website on my kaiser (tilt)
but the HTC screen plug in didn't have weather working on it.
so I decided to download some other HTC home plug-in from one of the website
it's called freewarepocketpc.net
after the download I installed it on the storage card memory
installation required restart.
after the restart the problem started
it cannot open windows,
it gets to the today screen then it gets stuck before openning HTC home screen
after it gets stuck it reboots by itself to go back to the same problem
I tried to take the Micro SD card out before i reboot.
but nothing happened .
it will get stuck and reboot.
I took the sim card out but the same thing happened
I wanna format this kaiser but I cannot establish a connection between the computer and the phone ..
so please tell me what to do.
I took the battery out of the phone in home that it goes to factory setting and take the home plug in out ..I'm hoping
but please I need the phone so bad
I have everything on it.
give me some ideas please..at least to format it.
please
I will appreciate it
thanks
Simple........ read the forum.....
Just perform a "Hard Reset"
Your kaiser will be reset back to factory ( all personal files are gone )
Ninlour said:
Hello guys ..I know it's my first thread and it's kind of mean to ask for a favor from the first time.
but here's what happened .
I have an official windows Mobile 6.1 downloaded from the official htc website on my kaiser (tilt)
but the HTC screen plug in didn't have weather working on it.
so I decided to download some other HTC home plug-in from one of the website
it's called freewarepocketpc.net
after the download I installed it on the storage card memory
installation required restart.
after the restart the problem started
it cannot open windows,
it gets to the today screen then it gets stuck before openning HTC home screen
after it gets stuck it reboots by itself to go back to the same problem
I tried to take the Micro SD card out before i reboot.
but nothing happened .
it will get stuck and reboot.
I took the sim card out but the same thing happened
I wanna format this kaiser but I cannot establish a connection between the computer and the phone ..
so please tell me what to do.
I took the battery out of the phone in home that it goes to factory setting and take the home plug in out ..I'm hoping
but please I need the phone so bad
I have everything on it.
give me some ideas please..at least to format it.
please
I will appreciate it
thanks
Click to expand...
Click to collapse
if it wont let you do anything hold down both soft keys and push the stylus and hold them all in/down until the hard reset/clear storage screen comes on, press send to start reset then send to reboot when prompted to
if non of the above work put the phone in bootloader manually (see the wiki) and flash a different rom
sd73ta said:
if non of the above work put the phone in bootloader manually (see the wiki) and flash a different rom
Click to expand...
Click to collapse
yup...
as sd73ta said...
as long as you can put the phone in bootloader mode, your ok
just put it in bootloader mode (keep the camera hard button pressed and insert the stylus for soft reset)
you then see the tri-colored screen known as the bootloader...
then, insert your USB cable and ignore the fact that activesync is not working...
flash the rom you want to flash...and it will work hopefully
there! i just saved you some wiki time reading cause your in a panicked mood but after this please read read read...
thank you so much guys for the fast response..
I can't wait to go home and try it out!!!!
you will save my life this way.
because i use the phone as a modem to get my online classes done.
so now i don't have to go to the library if it worked!
IT WORKEDDDD!!!!!
but i had to download a new ROM..
I used the camera botten with the softrest!!
but you know what I'm in a mood for some customized ROM
what's your favorite one guys?
Ninlour said:
but you know what I'm in a mood for some customized ROM
what's your favorite one guys?
Click to expand...
Click to collapse
Just test all custom rom if u really in mood to use one.
flashing one rom is less than 5mins using SD. Then u will find one which will best suit ur need
p/s : and maybe u could modify ur thread topic since ur prob has been solved
I would use this ROM, they seem very stable and work well on my Tilt. Good luck.
http://forum.xda-developers.com/showthread.php?t=428261
PLEASE READ THIS THREAD BEFORE YOU TRY TO FLASH A COOKED ROM:
http://forum.xda-developers.com/showthread.php?t=433835
Ninlour said:
IT WORKEDDDD!!!!!
but i had to download a new ROM..
I used the camera botten with the softrest!!
but you know what I'm in a mood for some customized ROM
what's your favorite one guys?
Click to expand...
Click to collapse
Best advice I can give you is search and read. Read the wiki. This is an obvious suggestion but it will help in more ways than one. You get the answer to your question but you also learn the correct terminology which HELPS YOU TO ASK THE RIGHT QUESTIONS Since you are new at flashing, i would suggest you keep an open mind, experiment, but research to see if your chosen methodology is good before you turn your device into a brick.
Prerequisites:
1. update your bootloader to something brick proof.
2. make sure you pick a radio which is compatible with the rom you have chosen.
What to look for?
1. Usually the chefs are nice enough to place a date on their threads when they announce a new build. Keep your eyes open for that and also updates within the threads as the builds, bugfixes, and download locations are updated sometimes multiple times a day on hot threads.
2. start with a bloated full build which is full of aps and tweaks and decide what you like/dislike about it. You may find that you rarely use some of the stuff and want to run a bit leaner.
3. Find a completely stripped down lite build and build it up piece by piece with cabs(cabinet file installers). You've now seen both sides of the spectrum while also gaining some flashing experience.
What to do next?
Now that you have decided which utils and apps you need, tweak the settings and dial them in. You'll learn much by playing with settings and watching the behavior of the device change.
And Finally:
Find a build which is as close to what you settled on yourself. Chances are the chefs have put something together which will surpass your expectations and can be modified the way you like it with just a few cabs/tweaks after install.
Good Luck.
Ninlour said:
what's your favorite one guys?
Click to expand...
Click to collapse
Have you read the WIKI?
This is specifically requested that you not start a thread that asks about ROMs. It could get you banned.
Recommend that you start reading before you get yourself into more trouble than you want.
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
aliarjun said:
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
Click to expand...
Click to collapse
Can you soft reset? Can you hard reset? You need to read a lot more that what you have read. This site ( Kaiser ) has the best help thread on XDA... Olipof has one in all unlocker that you should have used.
I just tried that tool a few days ago,had the same problem while flashing the kaiser of a friend...
to get it to work I did the following:
I manually installed the 3.29Hard2 SPL from cmonex using jump spl,
then used the tool you use for the sim unlock.
I think that the problem is that that tool doesn't connect via usb when it reaches the bootloader.
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
aliarjun said:
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
Click to expand...
Click to collapse
rtfw
You need to read son, read like you have never read before. Then when you think you understand it your almost there. I have been reading for years and have yet to make my first rom guess it really comes down to time. Well the answers are there and yes you sometimes have to dig. But there is this handy search button at the top of the page third from the right if my memory is clear. And it now uses the google search engine to search this forum a function not here years ago. So your tools are there use them wisely young grass hopper and try not to post until you have read for some days. And please dont open another thread if you have a question such as how do i jump spl you should find the appropriate thread to post in.
thanks
nate
Duplicate thread.
Thread Closed
EDIT: Answer in this thread :http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave
Hi,
I'm quite new to xda-developers (*collective groaning at the newbie, I'm sure*); what happens to phones here is rather astounding, though, and I'd certainly be willing to make a small donation to anyone that can help .
My problem is as follows: I have an HTC Touch (an Elfin; I can post my device info if necessary), and I'd like to try upgrading the ROM (I've gotten Onyx 5.01 from the forums; it looks excellent). This alone isn't (shouldn't) be a problem for me, but my Touch has, I believe, lost a few pins in it's extUSB port over the years, and will not connect to Mobile Device Centre/ActiveSync through the USB port. I can connect through Bluetooth just fine... but certain expected problems arise from flashing a ROM over Bluetooth . So, what I really need to know, in fairly well explained steps, is: how can I (safely) flash my ROM using the microSD card?
I apologize in advance for any incorrect/misplaced terminology; feel free to correct/rebuke
-Kris
Search the stickeys. There are step by step instructions available
Can you give me a link to an appropriate thread/section of a thread? I've been rooting around all day, and I can't find anything that describes my situation; every guide I've found gets to a certain point and then tells you to "connect your device via USB..." - is there no way around a broken USB connection?
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Soon, I will flashing my Elfin with this method. And I'm asking me if I must let the same name for the rom (ELF0IMG.nbh) or an other name. Can someone tell me if I must change or if it'sd OK with this name ?
Thanks.
PS : Sorry for eventually write error, I'm french.
crapula512 said:
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Click to expand...
Click to collapse
Ok, thanks, I'd seen that before, but it tells me about an "Invalid Certificate" when I get to the rebooting part... which means my device is not CID unlocked, correct? Is there any way to CID unlock my Elfin without a USB connection?
Thanks again for the help
Calmcacil said:
Soon, I will flashing my Elfin with this method. And I'm asking me if I must let the same name for the rom (ELF0IMG.nbh) or an other name. Can someone tell me if I must change or if it'sd OK with this name ?
Thanks.
PS : Sorry for eventually write error, I'm french.
Click to expand...
Click to collapse
yes, the name must be that one, or the flash process wont start.
krisrm said:
Ok, thanks, I'd seen that before, but it tells me about an "Invalid Certificate" when I get to the rebooting part... which means my device is not CID unlocked, correct? Is there any way to CID unlock my Elfin without a USB connection?
Thanks again for the help
Click to expand...
Click to collapse
mmm... thats a problem because to cid unlock u must follow the white screen method. im pretty sure u might be able to get to the white screen by hand but not sure how u will flash it then.
another posibility is flashing the unbricker rom (by sd) and then i guess u can re-flash the spl by sd too.
anyway, im not sure. maybe aman or cmonex can help u with this.
Invalid Certificate too
Does the data in the SD card get deleted after flashin the ROM via SD card..???
no, it doesn't
Thread Closed as it Contains an Anwser.