I tried the unlock application, which didn't work, but I held down the power button and the camera button and now I have a permanent tri color screen
It reads:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
can anyone tell me how to get rid of this please.
Rae'uQ said:
I tried the unlock application, which didn't work, but I held down the power button and the camera button and now I have a permanent tri color screen
It reads:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
can anyone tell me how to get rid of this please.
Click to expand...
Click to collapse
have you tried the soft reset or taking the battery out?
I don't pretend to be an expert, but it looks to me that your unlock did work. Now you need to flash a rom on there. Read through this thread;
http://forum.xda-developers.com/showthread.php?t=433835
Also take a look at this one;
http://forum.xda-developers.com/showthread.php?t=423486
Related
I have a Jamin Running WM6 OS 4.0.0.4. I tried to change the OS but somehow it got corrupted. Now its going to the blue screen showing
IPL 2.13.0001
SPL 2.13.0001
GSM 02.07.20
OS 4.0.0.0
and then it halts. I habe tried everything to take it into Bootloader mode but its not going to the Bootloader mode. I connected it to the charger, pressed the Camera Button, soft reset it holding the camera button but its not going anywhere, it just goes blank then i have to take out the battery and put it again. Maximum it goes to the black screen with white test asking just to format. I want to take it to the Bootloader colored screen so that i can connect it to USB and install the OS again. I have tried everything but its not going to bootloader colored screen. Please help.
Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks
noor_ltd said:
Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks
Click to expand...
Click to collapse
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.
Quentin- said:
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.
Click to expand...
Click to collapse
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?
noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
power+camera+reset...and its really tricky. Keep holding camera+power after you have pushed reset till it comes up. It even takes me a number of tries before I get the tri-color screen.
I never tried loading HardSPLv1 from the boot screen but it should work. I highly suggest doing that *before* you try to re-flash a ROM. Link here: http://forum.xda-developers.com/showthread.php?t=334679
Then after loading HardSPLv1 go back to the tri-color screen and load the HTC or ATT default ROM and see if that fixes your problem.
EDIT: I agree with TheOccult FYI, I assume you have a reason to not have simply swapped the device at your retailer hence my advice. If you can easily swap the device just do that instead and it'll save you a lot of grief.
TheOccult said:
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?
Click to expand...
Click to collapse
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"
noor_ltd said:
so I remove the battery when windows is working.....without power off.
Click to expand...
Click to collapse
I'm just curious but why would you remove the battery when the device is powered on?
Your best bet is to take it back to the vendor as they may need to reload your device since you haven't flashed your rom you should be okay.
noor_ltd said:
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"
Click to expand...
Click to collapse
You broke it. Take it back where you bought it.
Also, this is not the appropriate forum for your problem.
HELP! how to quit from boot mode, 3 color mode?
i want to unlock my kaiser kais130 and install kaiser-HardSPLv1 and run from phone, try with step one and stuck in 95%, try to recovery it's all fine, when i power on kaiser go to 3 color mode but for now sim unlocker or any radio flasher dont wanaa to recoognized this kaiser... and i don;t know how to exit from this...
try with soft reset, hard reset, remove battery bit always when i power on - kaiser put in 3 color mode... what should i do?
alfamobil said:
HELP! how to quit from boot mode, 3 color mode?
i want to unlock my kaiser kais130 and install kaiser-HardSPLv1 and run from phone, try with step one and stuck in 95%, try to recovery it's all fine, when i power on kaiser go to 3 color mode but for now sim unlocker or any radio flasher dont wanaa to recoognized this kaiser... and i don;t know how to exit from this...
try with soft reset, hard reset, remove battery bit always when i power on - kaiser put in 3 color mode... what should i do?
Click to expand...
Click to collapse
There's a link in my signature just for you...
Dave
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Why did you....
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
Men! jajajaja ok lets see
when an upgrade finish it restart by itself you dont need to do nothing... when the phone begins and configures by itself if you want it... its recomemded... to hard reset i mean hold the record... hold the comm buttons and then push the rest hole still holdin the two buttons... a black screen appears telling you to press the send button unhold the butons so then pres the send button...
but for now try to put your phone in bootloaders i dont remember how but read the wikiwizard page it say how to enter in bootloaders forcing... then reflas with RUU make sure that your device is unlocked CID SIM etc etc etc.
tell me how is it going, maybe you will ned more steps.
Is not destroy cause it turns on dont be afraid it works but stucks on splash screen...
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
You said in your very first post that you had a "HTC Mogul", if so, you have a Titan? "Sprint Mogul" go here and see for sure what phone you have.
http://forum.xda-developers.com/forumdisplay.php?f=381
You better make sure before you try and do anything.
i had a mogul first, i sold it and took a wizard
That is good news... Did you fix your Wizard?
When I had mine and I flashed one of TNT's ROMs, it error ed and gave me introductions to follow but I just put it into boot loader mode and re flashed to a different ROM
After a soft reset (using down side button with stylus) my HTC Kaiser only boot on HardSPL 3.29 tri-color screen.
Only "Power on" -> "Tri-color screen". Without press power and camera button.
I already try to flash HardSPL 3.59 using KaiserCustomRUU.exe... All works perfectly.. but when reboot.. HardSPL 3.29 tri-color screen is showed
I already try to flash Another kernel using Atools... with KAISIMG.nbh on SD... The flash occurs all right.. but when reboot.. HardSPL 3.29 tri-color screen is showed.
OMG, I really don't know to do.
Any suggestion??
I will be grateful for any help.