Hellow
I have big problem with my application in evc++.
I connect PDA with PC via USB (PDA Client - PC Host)
My application can`t open COM9: assigned to serial USB ;( but when I open first wceusbsh001: on PC then PDA can open corectly.
Maybe CreateFile('\\wceusbsh001:'.... activate com9: on PDA?
Why programaticly simulate this operation on PDA?
Additional: When I open wceusbsh001 and next close them, COM9: is open correctly.
I have two PDA with this problem exist but I have PDA without this problem (COM9: open corectly)
Best Regards
Rafal
Related
Can i update the ROM over the miniSD card ?
Because when i turn on the USB cable (PC-Mob) the PC saids "Unknown Device" and when i try another tornado it works so the USB is defect or a part of the phone software. I use bluetooth for the sync but i can't update the ROM.
is it possible (to update from miniSD)?
1. try an other usb port;
2. if you are using windows vista, you need old xp driver: try this guide ( http://www2.webng.com/nionxp/articoli/art_print.asp?artID=41 );
3. if you are using windows xp try to remove activesync, device drivers and reinstall them. (don't use mobile device center in xp: very nice, but programmed very bad without support for all device!).
in every case in informatics you can do all! there's a procedure to load an image from sd to device rom booting from sd but i don't remember the procedure.. follow the first three points before wasting your time.. solving a software problem is more simple..
good luck!
_________________________
>> Smartphone software <<
1. tried on 3 PC-s
2. -
3. I tried on a my friends PC his tornado works my not
maybe the pins are broken so the OS recognizes that there is a device but maybe the TX/RX pin is broken and can't get the info
i think i must extract the setup of the ROM and rename the nk.nbf file to ??.nbf , then insert the card and enter the bootloader
i think the USB connector on the phone is physical defect.
try an other cable, or looking for repair usb pins:
http://docs.sun.com/source/817-3951-12/appA.html#13540
Working reverse tether....use your home PC's internet connection for ur galaxy sl i9003.
you can use usb cable for the connection.
STEPS:
1.download the files to corresponding devices.( PC component to computer and USB tunnel app to phone)
2.Extract the pc component.
3.Install the apk file.
4.Ensure the usb Debugging is on.
5.connect the phone via USB
6.open the 'android tool' from the pc component.
7.USB tunnel app will open on its own.
8.now select the device and click connect.
9.Now you can enjoy the superfast broadband on yor mobile.
download links.
USB tunnel app
http://forum.xda-developers.com/attachment.php?attachmentid=1096142&d=1338437103
pc component
http://forum.xda-developers.com/attachment.php?attachmentid=1096143&d=1338437103
main advantage- u can use ur vpn trick of pc in the phone......
Source : galaxy arena blogspot
Hey guys here is the way to connect to pc
Case 1(your phone drivers are not installed correctly)
The best way is to install kies Download samsung usb drivers for mobile phones
Use moborobo pc suite
Case 2(u have installed drivers properly but still it is not recognized)
"Run "regedit"and select the "HKEY_LOCAL_MACHINE/SYSTEM/MountedDevices" folder. See all the "Dos Devices" listed? You'll have one entry for each physically mounted drive (HDD or Disc) plus you'll have one show up for each USB drive you attempt to insert. Double click each device listed and seeifyou seetextsaying something like"U.S.B.S.T.O.R...". Once you find that device, right click it and select "Rename". Now change the drive letter to something unused... like Q: or something. Close regedit, disconnect the USB device and reconnect
Try this it works:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
NO NEED to Go Somewhere else, here is how to reverse tethering ( How to use internet)
Hi lovers of knowledge
First we can use our phone as a modem for our PC, that process is easier than usisng our PC as a internet source(internet provider)
for our phone.
As a master of android, I offer a solution for all android phones.
AIO has been developed by a brother(android developer) from egypt
1 - Download the attached rar file(winrar) TheKingOfAndroid.blogspot.com_AIO.rar
2- Go to -"system settings", -"developer options" or "development" , -activate "USB debuging"
3- your phone ADB-drivers must be installed
3- open the folder and run AndroidTool.exe ; an application will be installed in your phone: AIO remote
4- your phone is now connected to the net via PC
ENJOY
Hello everyone
now i have mi9 with broken screen touch is dead too , my files on the mi9 is very important for me and unfortunately usb debugging is off
so i was thinking if i can install wifi ftp server from play store using my google account so i can get my files back through wifi
but the problem is every wifi ftp server is asking for permission to start and ofc i cant do this because touch isnt working
so i want to install app via google play using my google account that allow me to access my phone files without permission
any ideas ??
It doesn't need Internet to transfer data like pictures or PDF files from phone to PC:
If phone is USB-OTG-enabled then all you need is an USB-OTG-adapter cable to access the files from PC: the phone then acts like a USB-stick ( USB host ).
Of course PC must support USB-OTG, too, and phone should be fully charged.
How-To ( Windows PC ):
Unlock your device.
With a USB-OTG cable, connect your device to your computer.
On your device, tap the "Charging this device via USB" notification.
Under "Use USB for," select File Transfer.
A file transfer window will open on your computer. Use it to drag files.
When you're done, eject your device from Windows.
Unplug the USB-OTG cable.
download scrcpy and extract it: https://github.com/Genymobile/scrcpy
connect your phone to pc via usb
go to extract folder, hold Shift key and right click -> choose run powershell -> input command:
scrcpy --otg