Related
Hi,
I've flashed 5.1.1 image over my N5 using google factory images and flash-all.sh script (removed -w) option. After flash the phone rebooted correctly, but it just hangs on the 4 spinning dots. I've wait over 20 minutes but still no change. I've connected the phone again run logcat and the output was I guess the same as the pasted before.
I thought I move back to 5.1.0 but after doing that I still see the spinng dots and nothing more. The current log is pasted here.
Any help, pls? I've no idea what should I do now...
Code:
- waiting for device -
--------- beginning of main
D/QSEECOMD: ( 180): qseecom listener services process entry PPID = 1
W/auditd ( 173): type=2000 audit(0.0:1): initialized
I/auditd ( 173): type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
W/auditd ( 173): type=1404 audit(0.0:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
E/QSEECOMD: ( 180): Listener: index = 0, hierarchy = 0
D/QSEECOMD: ( 180): Init dlopen(librpmb.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 180): Init::Init dlsym(g_FSHandle rpmb_init_service) succeeds
I/rmt_storage( 179): No EBR found
I/rmt_storage( 179): Error (-1) parsing MBR partitions
I/rmt_storage( 179): Registering modemst1: 0x4a /boot/modem_fs1
I/rmt_storage( 179): Registering modemst2: 0x4b /boot/modem_fs2
I/rmt_storage( 179): Registering fsg: 0x58 /boot/modem_fsg
I/rmt_storage( 179): Registering ssd: 0x5d ssd
I/lowmemorykiller( 175): Using in-kernel low memory killer interface
I/rpmb ( 180): RPMB Mult = 16384, Rel_sec_cnt = 1
I/rmt_storage( 179): Registering fsc: 0xff /boot/modem_fsc
I/rmt_storage( 179): 5 GPT partitions found
E/DrmLibRpmb( 180): rpmb_init succeeded! with ret = 0
D/QSEECOMD: ( 180): Init rpmb_init_service ret = 0
D/QSEECOMD: ( 180): RPMB system services: init (Listener ID = 8192)
E/QSEECOMD: ( 180): Listener: index = 1, hierarchy = 0
D/QSEECOMD: ( 180): Init dlopen(libssd.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 180): Init::Init dlsym(g_FSHandle ssd_init_service) succeeds
E/SSD ( 180): ssd_init_service succeeded!
D/QSEECOMD: ( 180): Init ssd_init_service ret = 0
D/QSEECOMD: ( 180): SSD system services: init (Listener ID = 12288)
D/QSEECOMD: ( 180): Parent qseecom daemon process paused!!
D/QSEECOMD: ( 190): qseecom listener service threads starting!!!
D/QSEECOMD: ( 190): Total listener services to start = 4
E/QSEECOMD: ( 190): Listener: index = 0, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(librpmb.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle rpmb_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 8192 sb_length = 0x5000
D/QSEECOMD: ( 190): Init rpmb_start ret = 0
D/QSEECOMD: ( 190): RPMB system services: Started (Listener ID = 8192)
E/QSEECOMD: ( 190): Listener: index = 1, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(libssd.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle ssd_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 12288 sb_length = 0x5000
D/QSEECOMD: ( 190): Init ssd_start ret = 0
D/QSEECOMD: ( 190): SSD system services: Started (Listener ID = 12288)
E/QSEECOMD: ( 190): Listener: index = 2, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(libdrmtime.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle atime_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 11 sb_length = 0x5000
D/QSEECOMD: ( 190): Init atime_start ret = 0
D/QSEECOMD: ( 190): time services: Started (Listener ID = 11)
E/QSEECOMD: ( 190): Listener: index = 3, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(libdrmfs.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle fs_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 10 sb_length = 0x5000
D/QSEECOMD: ( 190): Init fs_start ret = 0
D/QSEECOMD: ( 190): file system services: Started (Listener ID = 10)
D/QSEECOMD: ( 190): QSEECOM DAEMON RUNNING
--------- beginning of system
I/Vold ( 177): Vold 2.1 (the revenge) firing up
I/SurfaceFlinger( 178): SurfaceFlinger is starting
I/SurfaceFlinger( 178): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 178): loaded /vendor/lib/egl/libEGL_adreno.so
D/libEGL ( 178): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
D/libEGL ( 178): loaded /vendor/lib/egl/libGLESv2_adreno.so
I/Adreno-EGL( 178): <qeglDrvAPI_eglInitialize:379>: QUALCOMM Build: 01/14/15, ab0075f, Id3510ff6dc
I/qdutils ( 178): Right Split=0
D/qdhwcomposer( 178): int qhwc::adRead(): /sys/class/graphics/fb2/ad could not be opened : No such file or directory
I/qdhwcomposer( 178): Initializing Qualcomm Hardware Composer
I/qdhwcomposer( 178): MDP version: 500
I/SurfaceFlinger( 178): Using composer version 1.3
I/qdhwcomposer( 178): hwc_registerProcs
I/qdhwcomposer( 178): Initializing UEVENT Thread
I/qdhwcomposer( 178): Initializing VSYNC Thread
D/qdhwcomposer( 178): hwc_getDisplayAttributes disp = 0, width = 1080
D/qdhwcomposer( 178): hwc_getDisplayAttributes disp = 0, height = 1920
I/qdhwcomposer( 178): vsync_loop: Reading vsync for dpy=0 from /sys/class/graphics/fb0/vsync_event
I/qdhwcomposer( 178): vsync_loop: Reading vsync for dpy=1 from /sys/class/graphics/fb1/vsync_event
I/SurfaceFlinger( 178): EGL information:
I/SurfaceFlinger( 178): vendor : Android
I/SurfaceFlinger( 178): version : 1.4 Android META-EGL
I/SurfaceFlinger( 178): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_KHR_create_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable
I/SurfaceFlinger( 178): Client API: OpenGL_ES
I/SurfaceFlinger( 178): EGLSurface: 8-8-8-8, config=0x5
I/SurfaceFlinger( 178): OpenGL ES informations:
I/SurfaceFlinger( 178): vendor : Qualcomm
I/SurfaceFlinger( 178): renderer : Adreno (TM) 330
I/SurfaceFlinger( 178): version : OpenGL ES 3.0 [email protected] [email protected] ([email protected])
I/SurfaceFlinger( 178): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_discard_framebuffer GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_sync GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_depth_texture_cube_map GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_EXT_sRGB GL_EXT_sRGB_write_con
I/SurfaceFlinger( 178): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 178): GL_MAX_VIEWPORT_DIMS = 4096
D/SurfaceFlinger( 178): Set power mode=2, type=0 flinger=0xb6082000
D/qdhwcomposer( 178): hwc_blank: Unblanking display: 0
D/qdhwcomposer( 178): hwc_blank: Done unblanking display: 0
E/qdhwcomposer( 178): hwc_vsync_control: vsync control failed. Dpy=0, enable=1 : Operation not supported on transport endpoint
E/SurfaceFlinger( 178): eventControl(0, 1) failed Operation not supported on transport endpoint
D/libEGL ( 229): loaded /vendor/lib/egl/libEGL_adreno.so
D/libEGL ( 229): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
D/libEGL ( 229): loaded /vendor/lib/egl/libGLESv2_adreno.so
I/Adreno-EGL( 229): <qeglDrvAPI_eglInitialize:379>: QUALCOMM Build: 01/14/15, ab0075f, Id3510ff6dc
E/BootAnimation( 229): couldn't find audio_conf.txt
D/qdutils ( 178): DEBUG_CALC_FPS: 0
D/qdutils ( 178): period: 10
D/qdutils ( 178): ignorethresh_us: 500000
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x1 conn_h=0xb6403070
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x1 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x1 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236803456, name creation success: 23
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x2 conn_h=0xb6403078
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x2 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x2 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236802816, name creation success: 23
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x3 conn_h=0xb6403080
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsg: clnt_h=0x3: req_h=0x3 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fsg: clnt_h=0x3 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsg: clnt_h=0x3: req_h=0x3 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236802176, name creation success: 23
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x4 conn_h=0xb6403088
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsc: clnt_h=0x4: req_h=0x4 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fsc: clnt_h=0x4 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsc: clnt_h=0x4: req_h=0x4 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236801536, name creation success: 23
I/rmt_storage( 179): rmt_storage_alloc_buff_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x5 msg_id=4: Alloc request received: Size: 1572864
I/rmt_storage( 179): rmt_storage_alloc_buff_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x5 msg_id=4: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x6 msg_id=3: R/W request received
I/rmt_storage( 179): Shared mem address set to 0xb5e80000
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 Unblock worker thread (th_id: -1236803456)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x6 msg_id=3: Bytes read = 512
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x6 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 About to block rmt_storage client thread (th_id: -1236803456) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x7 msg_id=3: R/W request received
I/rmt_storage( 179): Shared mem address set to 0xb5e80000
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 Unblock worker thread (th_id: -1236802816)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x7 msg_id=3: Bytes read = 512
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x7 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 About to block rmt_storage client thread (th_id: -1236802816) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x8 msg_id=3: R/W request received
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 Unblock worker thread (th_id: -1236803456)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x8 msg_id=3: Bytes read = 1571840
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x8 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 About to block rmt_storage client thread (th_id: -1236803456) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x5 conn_h=0xb6403090
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x9 msg_id=3: R/W request received
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 Unblock worker thread (th_id: -1236802816)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x9 msg_id=3: Bytes written = 1572864
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x9 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 About to block rmt_storage client thread (th_id: -1236802816) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_disconnect_cb: clnt_h=0x0x5 conn_h=0x0xb6403090
----------------------------
I've decided to go with Factory Reset procedure (5.1.0) image: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Hope that this will eventually help...
bzyx said:
Hi,
I've flashed 5.1.1 image over my N5 using google factory images and flash-all.sh script (removed -w) option. After flash the phone rebooted correctly, but it just hangs on the 4 spinning dots. I've wait over 20 minutes but still no change. I've connected the phone again run logcat and the output was I guess the same as the pasted before.
I thought I move back to 5.1.0 but after doing that I still see the spinng dots and nothing more. The current log is pasted here.
Any help, pls? I've no idea what should I do now...
Code:
- waiting for device -
--------- beginning of main
D/QSEECOMD: ( 180): qseecom listener services process entry PPID = 1
W/auditd ( 173): type=2000 audit(0.0:1): initialized
I/auditd ( 173): type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
W/auditd ( 173): type=1404 audit(0.0:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
E/QSEECOMD: ( 180): Listener: index = 0, hierarchy = 0
D/QSEECOMD: ( 180): Init dlopen(librpmb.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 180): Init::Init dlsym(g_FSHandle rpmb_init_service) succeeds
I/rmt_storage( 179): No EBR found
I/rmt_storage( 179): Error (-1) parsing MBR partitions
I/rmt_storage( 179): Registering modemst1: 0x4a /boot/modem_fs1
I/rmt_storage( 179): Registering modemst2: 0x4b /boot/modem_fs2
I/rmt_storage( 179): Registering fsg: 0x58 /boot/modem_fsg
I/rmt_storage( 179): Registering ssd: 0x5d ssd
I/lowmemorykiller( 175): Using in-kernel low memory killer interface
I/rpmb ( 180): RPMB Mult = 16384, Rel_sec_cnt = 1
I/rmt_storage( 179): Registering fsc: 0xff /boot/modem_fsc
I/rmt_storage( 179): 5 GPT partitions found
E/DrmLibRpmb( 180): rpmb_init succeeded! with ret = 0
D/QSEECOMD: ( 180): Init rpmb_init_service ret = 0
D/QSEECOMD: ( 180): RPMB system services: init (Listener ID = 8192)
E/QSEECOMD: ( 180): Listener: index = 1, hierarchy = 0
D/QSEECOMD: ( 180): Init dlopen(libssd.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 180): Init::Init dlsym(g_FSHandle ssd_init_service) succeeds
E/SSD ( 180): ssd_init_service succeeded!
D/QSEECOMD: ( 180): Init ssd_init_service ret = 0
D/QSEECOMD: ( 180): SSD system services: init (Listener ID = 12288)
D/QSEECOMD: ( 180): Parent qseecom daemon process paused!!
D/QSEECOMD: ( 190): qseecom listener service threads starting!!!
D/QSEECOMD: ( 190): Total listener services to start = 4
E/QSEECOMD: ( 190): Listener: index = 0, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(librpmb.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle rpmb_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 8192 sb_length = 0x5000
D/QSEECOMD: ( 190): Init rpmb_start ret = 0
D/QSEECOMD: ( 190): RPMB system services: Started (Listener ID = 8192)
E/QSEECOMD: ( 190): Listener: index = 1, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(libssd.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle ssd_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 12288 sb_length = 0x5000
D/QSEECOMD: ( 190): Init ssd_start ret = 0
D/QSEECOMD: ( 190): SSD system services: Started (Listener ID = 12288)
E/QSEECOMD: ( 190): Listener: index = 2, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(libdrmtime.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle atime_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 11 sb_length = 0x5000
D/QSEECOMD: ( 190): Init atime_start ret = 0
D/QSEECOMD: ( 190): time services: Started (Listener ID = 11)
E/QSEECOMD: ( 190): Listener: index = 3, hierarchy = 1
D/QSEECOMD: ( 190): Init dlopen(libdrmfs.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 190): Init::Init dlsym(g_FSHandle fs_start) succeeds
D/QSEECOMAPI: ( 190): QSEECom_register_listener 10 sb_length = 0x5000
D/QSEECOMD: ( 190): Init fs_start ret = 0
D/QSEECOMD: ( 190): file system services: Started (Listener ID = 10)
D/QSEECOMD: ( 190): QSEECOM DAEMON RUNNING
--------- beginning of system
I/Vold ( 177): Vold 2.1 (the revenge) firing up
I/SurfaceFlinger( 178): SurfaceFlinger is starting
I/SurfaceFlinger( 178): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 178): loaded /vendor/lib/egl/libEGL_adreno.so
D/libEGL ( 178): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
D/libEGL ( 178): loaded /vendor/lib/egl/libGLESv2_adreno.so
I/Adreno-EGL( 178): <qeglDrvAPI_eglInitialize:379>: QUALCOMM Build: 01/14/15, ab0075f, Id3510ff6dc
I/qdutils ( 178): Right Split=0
D/qdhwcomposer( 178): int qhwc::adRead(): /sys/class/graphics/fb2/ad could not be opened : No such file or directory
I/qdhwcomposer( 178): Initializing Qualcomm Hardware Composer
I/qdhwcomposer( 178): MDP version: 500
I/SurfaceFlinger( 178): Using composer version 1.3
I/qdhwcomposer( 178): hwc_registerProcs
I/qdhwcomposer( 178): Initializing UEVENT Thread
I/qdhwcomposer( 178): Initializing VSYNC Thread
D/qdhwcomposer( 178): hwc_getDisplayAttributes disp = 0, width = 1080
D/qdhwcomposer( 178): hwc_getDisplayAttributes disp = 0, height = 1920
I/qdhwcomposer( 178): vsync_loop: Reading vsync for dpy=0 from /sys/class/graphics/fb0/vsync_event
I/qdhwcomposer( 178): vsync_loop: Reading vsync for dpy=1 from /sys/class/graphics/fb1/vsync_event
I/SurfaceFlinger( 178): EGL information:
I/SurfaceFlinger( 178): vendor : Android
I/SurfaceFlinger( 178): version : 1.4 Android META-EGL
I/SurfaceFlinger( 178): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_KHR_create_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable
I/SurfaceFlinger( 178): Client API: OpenGL_ES
I/SurfaceFlinger( 178): EGLSurface: 8-8-8-8, config=0x5
I/SurfaceFlinger( 178): OpenGL ES informations:
I/SurfaceFlinger( 178): vendor : Qualcomm
I/SurfaceFlinger( 178): renderer : Adreno (TM) 330
I/SurfaceFlinger( 178): version : OpenGL ES 3.0 [email protected] [email protected] ([email protected])
I/SurfaceFlinger( 178): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_discard_framebuffer GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_sync GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_depth_texture_cube_map GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_EXT_sRGB GL_EXT_sRGB_write_con
I/SurfaceFlinger( 178): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 178): GL_MAX_VIEWPORT_DIMS = 4096
D/SurfaceFlinger( 178): Set power mode=2, type=0 flinger=0xb6082000
D/qdhwcomposer( 178): hwc_blank: Unblanking display: 0
D/qdhwcomposer( 178): hwc_blank: Done unblanking display: 0
E/qdhwcomposer( 178): hwc_vsync_control: vsync control failed. Dpy=0, enable=1 : Operation not supported on transport endpoint
E/SurfaceFlinger( 178): eventControl(0, 1) failed Operation not supported on transport endpoint
D/libEGL ( 229): loaded /vendor/lib/egl/libEGL_adreno.so
D/libEGL ( 229): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
D/libEGL ( 229): loaded /vendor/lib/egl/libGLESv2_adreno.so
I/Adreno-EGL( 229): <qeglDrvAPI_eglInitialize:379>: QUALCOMM Build: 01/14/15, ab0075f, Id3510ff6dc
E/BootAnimation( 229): couldn't find audio_conf.txt
D/qdutils ( 178): DEBUG_CALC_FPS: 0
D/qdutils ( 178): period: 10
D/qdutils ( 178): ignorethresh_us: 500000
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x1 conn_h=0xb6403070
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x1 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x1 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236803456, name creation success: 23
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x2 conn_h=0xb6403078
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x2 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x2 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236802816, name creation success: 23
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x3 conn_h=0xb6403080
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsg: clnt_h=0x3: req_h=0x3 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fsg: clnt_h=0x3 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsg: clnt_h=0x3: req_h=0x3 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236802176, name creation success: 23
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x4 conn_h=0xb6403088
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsc: clnt_h=0x4: req_h=0x4 msg_id=1: Client found
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fsc: clnt_h=0x4 Worker thread started
I/rmt_storage( 179): rmt_storage_open_cb: /boot/modem_fsc: clnt_h=0x4: req_h=0x4 msg_id=1: Send response: res=0 err=0
I/rmt_storage( 179): wake lock name: rmt_storage_-1236801536, name creation success: 23
I/rmt_storage( 179): rmt_storage_alloc_buff_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x5 msg_id=4: Alloc request received: Size: 1572864
I/rmt_storage( 179): rmt_storage_alloc_buff_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x5 msg_id=4: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x6 msg_id=3: R/W request received
I/rmt_storage( 179): Shared mem address set to 0xb5e80000
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 Unblock worker thread (th_id: -1236803456)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x6 msg_id=3: Bytes read = 512
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x6 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 About to block rmt_storage client thread (th_id: -1236803456) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x7 msg_id=3: R/W request received
I/rmt_storage( 179): Shared mem address set to 0xb5e80000
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 Unblock worker thread (th_id: -1236802816)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x7 msg_id=3: Bytes read = 512
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x7 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 About to block rmt_storage client thread (th_id: -1236802816) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs1: clnt_h=0x1: req_h=0x8 msg_id=3: R/W request received
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 Unblock worker thread (th_id: -1236803456)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x8 msg_id=3: Bytes read = 1571840
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1: req_h=0x8 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs1: clnt_h=0x1 About to block rmt_storage client thread (th_id: -1236803456) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_connect_cb: clnt_h=0x5 conn_h=0xb6403090
I/rmt_storage( 179): rmt_storage_rw_iovec_cb: /boot/modem_fs2: clnt_h=0x2: req_h=0x9 msg_id=3: R/W request received
I/rmt_storage( 179): wakelock acquired: 1, error no: 2
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 Unblock worker thread (th_id: -1236802816)
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x9 msg_id=3: Bytes written = 1572864
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2: req_h=0x9 msg_id=3: Send response: res=0 err=0
I/rmt_storage( 179): rmt_storage_client_thread: /boot/modem_fs2: clnt_h=0x2 About to block rmt_storage client thread (th_id: -1236802816) wakelock released: 1, error no: 0
I/rmt_storage( 179):
I/rmt_storage( 179): rmt_storage_disconnect_cb: clnt_h=0x0x5 conn_h=0x0xb6403090
----------------------------
I've decided to go with Factory Reset procedure (5.1.0) image: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Hope that this will eventually help...
Click to expand...
Click to collapse
I have same problem porting a Xperia Z5 rom.
I used more than one app to do things on wifi enable and wifi/network connect. Mainly mac, dns, turn off IP6. I tried to install a webcam app that also made use of things in that vein and now whenever wifi connects to a network successfully the status bar crashes/FCs over and over again. I turned the apps off but something must have happened to make it persistent. Connectivity itself and the wifi manager appear fine. As soon as I turn wifi off or it disconnects the status bar comes back.
Any ideas?
logcat
Code:
/dalvikvm( 3682): DexOpt: illegal method access (call Landroid/content/res/TypedArray;.<init> (Landroid/content/res/Resources;[I[II)V from Landroid/content/res/XResources$XTypedArray;)
I/dalvikvm( 3682): Could not find method android.content.res.TypedArray.<init>, referenced from method android.content.res.XResources$XTypedArray.<init>
W/dalvikvm( 3682): VFY: unable to resolve direct method 82: Landroid/content/res/TypedArray;.<init> (Landroid/content/res/Resources;[I[II)V
D/dalvikvm( 3682): VFY: replacing opcode 0x70 at 0x0002
D/PhoneStatusBar( 3682): mSettingsPanelGravity = 55
I/StatusBarManagerService( 530): registerStatusBar [email protected]0
V/PhoneStatusBar/NavigationBarView( 3682): touchEnabled:false
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/PhoneStatusBar( 3682): disable: < expand icons alerts ticker system_info back home recent clock search >
W/KeyguardTouchDelegate( 3682): isShowingAndNotHidden(): NO SERVICE!
W/KeyguardTouchDelegate( 3682): isInputRestricted(): NO SERVICE!
W/KeyguardTouchDelegate( 3682): isShowingAndNotHidden(): NO SERVICE!
W/ContentService( 530): Observer [email protected] is already registered.
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 3682): 1111391464: getState() : mService = null. Returning STATE_OFF
D/dalvikvm( 3682): JIT code cache reset in 0 ms (4096 bytes 2/0)
I/Adreno200-EGL( 3682): <qeglDrvAPI_eglInitialize:265>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_2.5.5.04.02.02.092.059_msm8960_JB_2.5.5_CL3896081_release_AU (CL3896081)
I/Adreno200-EGL( 3682): Build Date: 06/25/13 Tue
I/Adreno200-EGL( 3682): Local Branch:
I/Adreno200-EGL( 3682): Remote Branch: quic/jb_2.5.5
I/Adreno200-EGL( 3682): Local Patches: NONE
I/Adreno200-EGL( 3682): Reconstruct Branch: AU_LINUX_ANDROID_JB_2.5.5.04.02.02.092.059 + NOTHING
W/dalvikvm( 3682): threadid=1: thread exiting with uncaught exception (group=0x41bd1ce0)
E/AndroidRuntime( 3682): FATAL EXCEPTION: main
E/AndroidRuntime( 3682): Process: com.android.systemui, PID: 3682
E/AndroidRuntime( 3682): java.lang.RuntimeException: Error receiving broadcast Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } in [email protected]
E/AndroidRuntime( 3682): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:776)
E/AndroidRuntime( 3682): at android.os.Handler.handleCallback(Handler.java:733)
E/AndroidRuntime( 3682): at android.os.Handler.dispatchMessage(Handler.java:95)
E/AndroidRuntime( 3682): at android.os.Looper.loop(Looper.java:136)
E/AndroidRuntime( 3682): at android.app.ActivityThread.main(ActivityThread.java:5158)
E/AndroidRuntime( 3682): at java.lang.reflect.Method.invokeNative(Native Method)
E/AndroidRuntime( 3682): at java.lang.reflect.Method.invoke(Method.java:515)
E/AndroidRuntime( 3682): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:796)
E/AndroidRuntime( 3682): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:612)
E/AndroidRuntime( 3682): at de.robv.android.xposed.XposedBridge.main(XposedBridge.java:132)
E/AndroidRuntime( 3682): at dalvik.system.NativeStart.main(Native Method)
E/AndroidRuntime( 3682): Caused by: java.lang.StringIndexOutOfBoundsException: length=0; regionStart=1; regionLength=-2
E/AndroidRuntime( 3682): at java.lang.String.startEndAndLength(String.java:588)
E/AndroidRuntime( 3682): at java.lang.String.substring(String.java:1475)
E/AndroidRuntime( 3682): at com.android.systemui.quicksettings.WiFiTile.updateTile(WiFiTile.java:62)
E/AndroidRuntime( 3682): at com.android.systemui.quicksettings.NetworkTile.updateResources(NetworkTile.java:59)
E/AndroidRuntime( 3682): at com.android.systemui.quicksettings.WiFiTile.onWifiSignalChanged(WiFiTile.java:81)
E/AndroidRuntime( 3682): at com.android.systemui.statusbar.policy.NetworkController.notifySignalsChangedCallbacks(NetworkController.java:413)
E/AndroidRuntime( 3682): at com.android.systemui.statusbar.policy.NetworkController.refreshViews(NetworkController.java:1368)
E/AndroidRuntime( 3682): at com.android.systemui.statusbar.policy.NetworkController.onReceive(NetworkController.java:451)
E/AndroidRuntime( 3682): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:766)
E/AndroidRuntime( 3682): ... 10 more
I/Process ( 3682): Sending signal. PID: 3682 SIG: 9
W/ActivityManager( 530): Process com.android.systemui has crashed too many times: killing!
dmesg:
Code:
<6>[ 930.370486] binder: 530:834 transaction failed 29189, size 100-0
<6>[ 932.428933] binder: 530:2969 transaction failed 29189, size 100-0
<6>[ 934.594109] binder: 530:2711 transaction failed 29189, size 100-0
<6>[ 936.564291] binder: 530:2780 transaction failed 29189, size 100-0
<6>[ 938.567984] binder: 530:2707 transaction failed 29189, size 100-0
<6>[ 940.708042] binder: 530:834 transaction failed 29189, size 100-0
<6>[ 942.760598] binder: 530:673 transaction failed 29189, size 100-0
<6>[ 942.783000] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 942.783274] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 942.783366] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 942.783427] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 942.783518] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 942.783579] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 942.783671] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 942.783732] binder: 530:2969 transaction failed 29189, size 172-0
<6>[ 944.688875] binder: 530:542 transaction failed 29189, size 100-0
<6>[ 946.576407] binder: 530:2780 transaction failed 29189, size 172-0
<6>[ 946.848954] binder: 530:2711 transaction failed 29189, size 100-0
<6>[ 948.800152] binder: 530:805 transaction failed 29189, size 100-0
<6>[ 951.279078] binder: 530:805 transaction failed 29189, size 96-0
<6>[ 952.842819] healthd: battery l=48 v=3808 t=34.9 h=2 st=2 chg=u
<6>[ 953.012574] binder: 530:832 transaction failed 29189, size 100-0
<6>[ 955.029726] binder: 530:2780 transaction failed 29189, size 100-0
<6>[ 957.206103] binder: 530:2707 transaction failed 29189, size 100-0
<3>[ 957.940393] AXI: msm_bus_scale_client_update_request(): Client 4007498560 passed invalid index: 5
<3>[ 958.140546] AXI: msm_bus_scale_client_update_request(): Client 4007498560 passed invalid index: 5
<3>[ 958.281184] AXI: msm_bus_scale_client_update_request(): Client 4007498560 passed invalid index: 5
<3>[ 959.276392] AXI: msm_bus_scale_client_update_request(): Client 4007498560 passed invalid index: 5
<6>[ 959.320921] binder: 530:2711 transaction failed 29189, size 100-0
and yep, I googled and googled
Original Thread
https://forum.xda-developers.com/android/apps-games/app-themediy-samsung-galaxy-s8-s7-s6-j-t3685010
Idk if im right here. but someone told me i should post my problem here. I have a ported S8 Nougat Samsung Music on Android 6.0.1 Marshmallow an i get an fatal error which makes the app crash after few minutes of using:
Code:
10-07 01:23:10.812 449 449 F DEBUG : pid: 4054, tid: 4383, name: RenderThread >>> com.sec.android.app.music:service <<<
10-07 01:23:12.972 923 2455 I ActivityManager: Process com.sec.android.app.music:service (pid 4054)(adj 1) has died(153,322)
10-07 01:23:12.972 923 2455 W ActivityManager: Scheduling restart of crashed service com.sec.android.app.music/com.samsung.android.app.music.service.PlayerService2 in 1000ms
10-07 01:23:13.172 426 426 I SurfaceFlinger: id=261 createSurf (13x13),1 flag=4, Application Error: com.sec.android.app.music
10-07 01:23:13.832 426 1473 I SurfaceFlinger: id=189 Removed com.sec.android.app.music/com.samsung.android.app.music.common.activity.PlayerActivity (6/10)
10-07 01:23:13.842 426 445 I SurfaceFlinger: id=189 Removed com.sec.android.app.music/com.samsung.android.app.music.common.activity.PlayerActivity (-2/10)
10-07 01:23:14.812 426 2050 I SurfaceFlinger: id=261 Removed Application Error: com.sec.android.app.music (8/9)
10-07 01:23:14.812 426 448 I SurfaceFlinger: id=261 Removed Application Error: com.sec.android.app.music (-2/9)
---- 07.10.2017 01:23:32 ----
Can anyone tell me how to understand a log to solve the problem? bc i understand nothing..
thx
Looks like some system files were deleted. Did you remove anything or was it given to you like that.
So I have an LG K8 (2017) with this apparently well documented issue in Marshmallow where Android keeps trying to optimize one or more apps at boot, and takes forever to do so, often rebooting and then trying again, sometimes for hours on end. I'm not a firstworlder who can just get a new phone and be done with it, so I'd genuinely appreciate any guidance on how to fix this.
I enabled USB debugging and logged the phone while it boots, and the affected package seems to be 'googlequicksearchbox'. I'm not sure what this is, but it sounds like a part of Android, not something I can uninstall easily. Here are the relevant logs:
Code:
06-26 16:46:06.546 1840 1840 E installd: DexInv: --- END '/data/app/com.google.android.googlequicksearchbox-2/base.apk' --- status=0x000b, process failed
06-26 16:46:06.547 2443 2443 D PackageManager.DexOptimizer: dexopt package: /data/app/com.google.android.googlequicksearchbox-2/base.apk pkg=com.google.android.googlequicksearchbox - cost time = 273851 ms.
06-26 16:46:06.594 2443 2443 I PackageManager.DexOptimizer: Running dexopt (dex2oat) on: /data/app/com.google.android.googlequicksearchbox-2/base.apk pkg=com.google.android.googlequicksearchbox isa=arm64 vmSafeMode=false debuggable=false oatDir = /data/app/com.google.android.googlequicksearchbox-2/oat
06-26 16:46:06.590 2587 2587 W dex2oat : type=1400 audit(0.0:89): avc: denied { module_request } for kmod="personality-8" scontext=u:r:dex2oat:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
06-26 16:46:06.666 2587 2587 I dex2oat : Starting dex2oat.
06-26 16:46:06.765 288 1797 I BufferQueueProducer: [Android se está iniciando...](this:0x7fa1dd2780,id:14,api:1,p:2443,c:288) queueBuffer: fps=61.12 dur=1014.48 max=19.62 min=13.25
06-26 16:46:07.083 288 288 I SurfaceFlinger: [Built-in Screen (type:0)] fps:61.139503,dur:1014.07,max:18.02,min:14.76
06-26 16:46:07.285 1651 1662 I PerfService: PerfServiceNative_getPackName
06-26 16:46:07.780 288 1089 I BufferQueueProducer: [Android se está iniciando...](this:0x7fa1dd2780,id:14,api:1,p:2443,c:288) queueBuffer: fps=61.10 dur=1014.78 max=17.28 min=15.82
06-26 16:46:08.097 288 288 I SurfaceFlinger: [Built-in Screen (type:0)] fps:61.121483,dur:1014.37,max:16.57,min:16.12
06-26 16:46:08.286 1651 1662 I PerfService: PerfServiceNative_getPackName
06-26 16:46:08.794 288 396 I BufferQueueProducer: [Android se está iniciando...](this:0x7fa1dd2780,id:14,api:1,p:2443,c:288) queueBuffer: fps=61.11 dur=1014.63 max=16.87 min=15.91
06-26 16:46:09.112 288 288 I SurfaceFlinger: [Built-in Screen (type:0)] fps:61.114136,dur:1014.50,max:16.53,min:16.20
06-26 16:46:09.286 1651 1662 I PerfService: PerfServiceNative_getPackName
06-26 16:46:09.808 288 1089 I BufferQueueProducer: [Android se está iniciando...](this:0x7fa1dd2780,id:14,api:1,p:2443,c:288) queueBuffer: fps=61.14 dur=1014.02 max=16.75 min=15.89
06-26 16:46:10.126 288 288 I SurfaceFlinger: [Built-in Screen (type:0)] fps:61.119678,dur:1014.40,max:16.93,min:15.81
06-26 16:46:10.287 1651 1662 I PerfService: PerfServiceNative_getPackName
06-26 16:46:10.421 1867 1867 I sn : Retry 32
06-26 16:46:10.422 1867 1867 I sn : Fail to access err=2
06-26 16:46:10.422 1867 1867 I sn : Fail to access err=2
06-26 16:46:10.422 1867 1867 I sn : Fail to access err=2
06-26 16:46:10.422 1867 1867 I sn : Check all possible paths
06-26 16:46:10.553 1854 1854 I thermal_repeater: oh, queryMdThermalInfo (0)No such file or directory
06-26 16:46:10.558 1854 1854 I thermal_repeater: [recvMdThermalInfo] ret=5, strLen=127, ERROR
06-26 16:46:10.823 288 1089 I BufferQueueProducer: [Android se está iniciando...](this:0x7fa1dd2780,id:14,api:1,p:2443,c:288) queueBuffer: fps=61.08 dur=1014.99 max=17.03 min=16.01
06-26 16:46:11.141 288 288 I SurfaceFlinger: [Built-in Screen (type:0)] fps:61.103127,dur:1014.68,max:16.61,min:16.21
06-26 16:46:11.287 1651 1662 I PerfService: PerfServiceNative_getPackName
06-26 16:46:11.838 288 1797 I BufferQueueProducer: [Android se está iniciando...](this:0x7fa1dd2780,id:14,api:1,p:2443,c:288) queueBuffer: fps=61.13 dur=1014.28 max=16.99 min=15.90
06-26 16:46:11.911 288 524 W hwcomposer: [JOB] (0) Timed out waiting for vsync...
At this point hwcomposer begins to repeat this error message until the phone eventually reboots:
Code:
06-26 16:46:35.821 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1483/val=1)
06-26 16:46:35.853 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1485/val=1)
06-26 16:46:35.886 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1487/val=1)
06-26 16:46:35.918 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1489/val=1)
06-26 16:46:35.950 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1491/val=1)
06-26 16:46:35.982 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1493/val=1)
06-26 16:46:36.014 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1495/val=1)
06-26 16:46:36.047 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1497/val=1)
06-26 16:46:36.079 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1499/val=1)
06-26 16:46:36.111 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1501/val=1)
06-26 16:46:36.143 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1503/val=1)
06-26 16:46:36.176 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1505/val=1)
06-26 16:46:36.208 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1507/val=1)
06-26 16:46:36.240 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1509/val=1)
06-26 16:46:36.272 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1511/val=1)
06-26 16:46:36.304 288 524 W hwcomposer: [WKR] Timed out waiting for UICompThread_0 (cnt=1513/val=1)
After it tries again it may either boot successfully or fail again with the same error messages. Any ideas?
Enviado desde mi LG-X240 mediante Tapatalk
Same error here...
If you look at
play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox
you will see it's a part of "Google" application.
Just uninstall upgrades of "Google" and you're done !
Hi!
I bought Amlogic S905X3 4/64GB 1Gbit Ethernet Android Box (VONTAR X3) and it was DOA. No input from HDMI, only two LEDs are glowing and that’s it.
I tried Amlogic Burning Tool, without success. My PC doesn’t see the device despite using USB male-male cable capable of data transfer. The drivers are installed and everything should be ok.
I tried shorting some ‘pins’ as shown here (source: 4pda):
https://cs5-2.4pda.to/19610657/IMG_20200502_174831.jpg?ac3ab8d6ab3d87cf727a9e13ad8d43a8
But that didn’t work either. Maybe these aren’t the ‘pins’ I am looking for?
Also tried the reset button behind the AV/jack port but nothing happened.
Anyway, I’ve connected the device using UART and here’s my PuTTY log (it doesn't matter if I push the reset button or short the pins or put a bootable microSD inside - it's always the same):
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.10.03 19:16:17 =~=~=~=~=~=~=~=~=~=~=~=
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F; RCY:0;EMMC:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0001 - pwm id 0x00
bl2_stage_init 0xc0
bl2_stage_init 0x02
L0:00000000
L1:00000703
L2:00008067
L3:15000020
S1:00000000
B2:20282000
B1:a0f83180
TE: 101694
BL2 Built : 20:29:41, Jun 18 2019. g12a ga659aac - [email protected]
Board ID = 1
Set cpu clk to 24M
Set clk81 to 24M
Use GP1_pll as DSU clk.
DSU clk: 1200 Mhz
CPU clk: 1200 MHz
Set clk81 to 166.6M
eMMC boot @ 0
sw8 s
DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:37
board id: 1
Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
fw parse done
Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
PIEI prepare done
fastboot data load
00000000
emmc switch 1 ok
ddr saved addr:00016000
Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
00000000
emmc switch 0 ok
fastboot data verify
verify result: 0
enable_fast_boot
dmc_margin_rx==12 dmc_margin_tx==11 steps
DDR3 probe
ddr clk to 672MHz
Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
dmc_version 0001
Check phy result
INFO : End of initialization
INFO : Training has run successfully!
aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:43
DDR cs0 size: 3928MB
DDR cs1 size: 0MB
DMC_DDR_CTRL: 0000002dDDR size: 3928MB
DATA-W[0x00000000]:0xaaaaaaaa,R:0xaaafaaaa
fail D16 18
DATA-W[0x00000000]:0x55555555,R:0x55515555
fail D18
DATA-W[0x00000000]:0x00000001,R:0x00010001
fail D16
DATA-W[0x00000000]:0x00000002,R:0x00010002
fail D16
DATA-W[0x00000000]:0x00000004,R:0x00010004
fail D16
DATA-W[0x00000000]:0x00000008,R:0x00010008
fail D16
DATA-W[0x00000000]:0x00000010,R:0x00010010
fail D16
DATA-W[0x00000000]:0x00000020,R:0x00010020
fail D16
DATA-W[0x00000000]:0x00000040,R:0x00010040
fail D16
DATA-W[0x00000000]:0x00000080,R:0x00010080
fail D16
DATA-W[0x00000000]:0x00000100,R:0x00010100
fail D16
DATA-W[0x00000000]:0x00000200,R:0x00010200
fail D16
DATA-W[0x00000000]:0x00000400,R:0x00010400
fail D16
DATA-W[0x00000000]:0x00000800,R:0x00010800
fail D16
DATA-W[0x00000000]:0x00001000,R:0x00011000
fail D16
DATA-W[0x00000000]:0x00002000,R:0x00012000
fail D16
DATA-W[0x00000000]:0x00004000,R:0x00014000
fail D16
DATA-W[0x00000000]:0x00008000,R:0x00018000
fail D16
DATA-W[0x00000000]:0x00040000,R:0x00010000
fail D16 18
DATA-W[0x00000000]:0x00080000,R:0x00090000
fail D16
DATA-W[0x00000000]:0x00100000,R:0x00110000
fail D16
DATA-W[0x00000000]:0x00200000,R:0x00210000
fail D16
DATA-W[0x00000000]:0x00400000,R:0x00410000
fail D16
DATA-W[0x00000000]:0x00800000,R:0x00810000
fail D16
DATA-W[0x00000000]:0x01000000,R:0x01010000
fail D16
DATA-W[0x00000000]:0x02000000,R:0x02010000
fail D16
DATA-W[0x00000000]:0x04000000,R:0x04010000
fail D16
DATA-W[0x00000000]:0x08000000,R:0x08010000
fail D16
DATA-W[0x00000000]:0x10000000,R:0x10010000
fail D16
DATA-W[0x00000000]:0x20000000,R:0x20010000
fail D16
DATA-W[0x00000000]:0x40000000,R:0x40010000
fail D16
DATA-W[0x00000000]:0x80000000,R:0x80010000
fail D16
cs0 DataBus test failed
ADDR-W[0x00000004]:0xaaaaaaaa,R:0xaaaeaaaa
cs0 AddrBus test failed
fail address pin cs 0 add 0x 00000004
Cfg max: 5, cur: 1. Board id: 255. Force loop cfg
DDR3 probe
ddr clk to 672MHz
Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
dmc_version 0001
Check phy result
INFO : End of initialization
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 5, cur: 2. Board id: 255. Force loop cfg
DDR3 probe
ddr clk to 672MHz
Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
dmc_version 0001
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 5, cur: 3. Board id: 255. Force loop cfg
DDR3 probe
ddr clk to 672MHz
Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
dmc_version 0001
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 5, cur: 4. Board id: 255. Force loop cfg
LPDDR4 probe
ddr clk to 1008MHz
Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
dmc_version 0001
Check phy result
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 5, cur: 5. Board id: 255. Force loop cfg
DDR3 probe
ddr clk to 672MHz
Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
dmc_version 0001
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : ERROR : Training has failed!
1D training failed
All ddr config failed...
Reset...
boot times 0
And it loops from there to eternity so I decided to post only one loop.
Here are some PCB photos:
https://imgur.com/a/JH8OAEn
Is it dead like disco or can it be reanimated somehow?
I already got a partial refund so if nothing can be done then it goes to a trash can.
Any help would be greatly appreciated.
P.S. Sorry for the external (non)links but I didn't want to post 10 random replies in 10 random threads to unlock the ability to post proper external links. I'm not a filthy spammer
Try using the Amlogic Burning Tool and connect the usb cable to the 2.0 port of the android tv, not to usb 3.0
Hi loocas21,
I had the same problem here.(only 2 leds on)
How I solve it:
1 - diconnect the power on your device;
2 - press the reset button (and let it pressed)
3 - connect the power
I hope it helps you
Hi,
Any news on this?
I'm looking for the right steps before flash.
Thank you