Related
Hey all, first post long time reader.
Please dont flame me, i have tried to search for the answer but seem to be going nowhere.
Is anybody getting the Error [262] while using KaiserCustomRUU.exe? I just flashed Dutty's DualTouch v4, that worked great! Now i am trying to flash the radio, i have heard good things about 1.27.12.17. It will not flash, I have followed the instructions over and over again. It gets to the point where it shows the completion bar, it gets stuck with 0%. I follow the instructions, pull the battery out and try again, no luck. I have noticed that during the process active sync goes from green to grey. (I think this is supposed to happen) But the odd thing is that the "Local Area Connection" (for the phone) in Windows XP Network Connection disappears. I am guessing this is my problem. Does anybody know what causes the phone to disconnect from the computer? Or am i doing something obviously wrong.
Any help is appreciated.
also - after it locks up at th 0% screen, and after i receive the error 262, i then unplug the phone from the computer. when i do this, windows makes the sound of a USB device getting unplugged. so does that mean i really didnt loose connection, and the error 262 is due to something else?
Did you use Hard SPL Before flashing.Is a must to not brick your phone.
http://forum.xda-developers.com/showthread.php?t=334679
Read carefully and will be OK.
Yes i have used HardSPL. I have already flashed with Duty's DualTouch ROM, and it WORKS. It was really easy and painless. For some reason I can not get the radio to flash. From my understanding, HardSPL only needs to be done once. That changes the bootloader, i think? Either way, I already did the HardSPL, flashed the ROM, just want to change the radio now. As the instructions said, this can be done after I flash the ROM using CustomRUU. Any thoughts?
I am going to go ahead and try to flash a custom flash screen. Will post back results
I tried using the CustomRUU to flash Kaiser with new splash screen, but no luck. Same error as before. Good news is that the phone still works!
If you are shure about Hard SPL (you can check again if is rited OLIPOF) "Hold Camera + Power buttons together and reset with stylus"-to enter in Bootloader and check again.
If is correct I sugest to reflash with original HTC Rom (wich include radio ) and after that start again with HardSPL --- Radio --- ROM upgarde
For hard spl http://forum.xda-developers.com/showthread.php?t=334679
For original and other info http://forum.xda-developers.com/showthread.php?t=332246
and one of the best link for reverting http://forum.xda-developers.com/showthread.php?t=335568
Good luck !!!
ok so i go into bootloader, and i get
KAIS1*0
SPL-1.56.0000
CPLD-8
i had followed the insructions from this thread - http://forum.xda-developers.com/showthread.php?t=334679
- HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)
looks like i did something wrong? it does not say OLIPOF
any ideas? can i just do it all over again, and be safe?
thanks for your help.
You had some luck to flash cooked ROM without Hard SPL.Be more carefuly and read .Those guys work for us to be protecyed from breaking our phones
yes but read carefuly:
Please make sure ActiveSync is enabled (GREEN icon in systray)
and hit ENTER to start...
Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...
Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...
Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...
Process is finished, congratulations!
I see what you are saying. So some how I managed to just flash on the JumpSPL, and bypass the last steps of flashing HardSPL?
So now I should follow http://forum.xda-developers.com/showthread.php?t=354061
do step - "if you want to flash a hardSPL then run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC"
or do you suggest i just try to install HardSPL over again.
damn i suck, i thought i was being careful.
try Hard SPL but follow the instruction and don't hurry wait for every message from that window
That thread is just in case your phone don't enter in bootloader
will do, thanks for your help!
its definetly not my first day using a computer, flashing ROMs, etc. damn i feel like a complete newb
hey it worked. thanks for your help. if you are ever in chicago, PM me. i owe you a few beers.
No problem .Glad can help.
Hi, I tried to install WM 6.1
but i think i installed wrong version to for universal and its now compeletly dead even i can not access the boot loader
any one can help me please
aahmed12 said:
Hi, I tried to install WM 6.1
but i think i installed wrong version to for universal and its now compeletly dead even i can not access the boot loader
any one can help me please
Click to expand...
Click to collapse
remove tha battery, wait two mins and re-insert the battery, power on the device and try to enter bootloader. If you can now access the bootloader, format the DOC with MTTY (instructions are in the Wiki) If you still cannot access bootloader mode, do you have any leds lit?
Cheers,
Beasty
yes I have red lit form time to time when i connect it to the usb
but nothing at all
to enter the boot loader while ur device is off u press backlight+power withiout the restart botton .. i dunno if u already know that
Hey, I've met the same problem as yours. After I used MTTY to clear DOC, my D900 was totally down, even I could not access the BL (I've tried more 20 times). Then I changed the battery to another one, and press Power+Light+Reset, 2 minutes later the BL screen appeared! I flashed the ROM again, my D900 is working well now~
I tried some new ROMs (by Tomal, luca16thebig, VNInt...) and after upgraging to Cotulla latest version Uni crashed!
Now it only can boot in to hard reset mode (LEFT softkey + RIGHT softkey + RESET), no another activity. PC can't recognize device.
I tried to disable USB connection in ActiveSync and used Multi TTY/ExitBT. These tools couldn't connect to device (mtty says "\\.\WCEUSBSH001 port can not open").
(Uni in that moment was in hard reset mode)
How can i repair device?
MaximKorobov said:
I tried some new ROMs (by Tomal, luca16thebig, VNInt...) and after upgraging to Cotulla latest version Uni crashed!
Now it only can boot in to hard reset mode (LEFT softkey + RIGHT softkey + RESET), no another activity. PC can't recognize device.
I tried to disable USB connection in ActiveSync and used Multi TTY/ExitBT. These tools couldn't connect to device (mtty says "\\.\WCEUSBSH001 port can not open").
(Uni in that moment was in hard reset mode)
How can i repair device?
Click to expand...
Click to collapse
Go into bootloader mode (on/off button, light button, and reset hole all at once) make sure your sd card is out, and try to flash again with cotulla rom! dont forget to read his instructions to go back to normal roms and allow time for rom to set up, dont hard reset after you flash!!!!
regards
Jay
Yep.
I move out SD (SDHC) and SIM cards.
Tried flash again - when PC program usually show previous version and new version right now it show empty fields. When it start to flash it show "Error 112: CE ROM UPDATE ERROR" message.
When my Uni is bricked I boot into the bootloader with the "Serial"-string. Then I put my SDHC out of the device and then it says "USB".
Every flash worked very well.
I can't force it to show "Serial"-string
Try this
Cotulla ROM is different.Memory allocation is different.
1.Remove SD card and always remove the SIM card.Very important.
2.First uncheck the 'allow USB connection' in active sync or WMDC[if VISTA].
Close active sync/WMDC in task manager.
3.Put Uni in BOOTLOADER.[Power+Backlight+Soft reset].
4.Run mtty.Click on USB.
5.Type 14 0 [ there is a single space between 14 and 0],press enter.
Wait ....
6.Type task 32 [there is a single space between task and 32],press enter
Wait....
7.Type task 28 55aa [ there is a single space between 28 and 55,and no space between 55 and aa],press enter
Wait...
8.When the desktop finishes the work..usually takes 5-10 seconds..close mtty.
9.Disconnect Uni...which is still in BOOTLOADER...
10.Go to active sync/WMDC and check 'allow USB connection'.
11.Flash with a WM5 ROM..I had KDSkamal's Ultimate ROM.
12.You should have got Uni back.
13.Then upgrade it to any ROM you want..6.0,6.1etc...if you want to.
Honestly speaking I don't know what the heck these procedures are,but if you do this STEP by STEP it works like a charm.
Cheers...waiting for your reply.
OK.
Now i know what to send Uni via mtty.
We have a solution to connect tools to device properly (mtty says "\\.\WCEUSBSH001 port can not open") after such crush?
MaximKorobov said:
Yep.
I move out SD (SDHC) and SIM cards.
Tried flash again - when PC program usually show previous version and new version right now it show empty fields. When it start to flash it show "Error 112: CE ROM UPDATE ERROR" message.
Click to expand...
Click to collapse
Will it go into boot loder mode??
Please give info
Okay.
So you mean your device is stuck in---
white screen
Splash image
Bootloader
Or what?
I just like to help out,I just read wiki.
responderman said:
Will it go into boot loder mode??
Click to expand...
Click to collapse
In to hard reset mode (LEFT softkey + RIGHT softkey + RESET) - yes.
In mode, when it show "Serial/USB" connection - not.
kalya said:
Okay.
So you mean your device is stuck in---
white screen
Splash image
Bootloader
Or what?
I just like to help out,I just read wiki.
Click to expand...
Click to collapse
Look (It can be shown only with USB connection):
http://picasaweb.google.ru/Maxim.Korobov/RepairOfHTCUniversal?feat=directlink
And nothing else
Well,at this stage,what happens when you press 0[zero]?
And can you please tell whether you can PUT the UNI in the BOOTLOADER by pressing POWER+BACKLIGHT+SOFT RESET simultaneously?
Because I have read almost all the threads regarding STUCK uni and I never came across one with a screen like yours.
On the second thought...press Backlight+Soft reset simultaneously...what do you see?
The image you are showing us is "Hard reset" what you want is bootloader. you get boot loader as we described above, once you have it in boot loader it is easy to get your uni back. In bootloader it will say serial or USB if it is plugged in at the top and V1.01 or V2.01 or something like those numbers at the bottom on a grey unlit screen.
kalya said:
Well,at this stage,what happens when you press 0[zero]?
And can you please tell whether you can PUT the UNI in the BOOTLOADER by pressing POWER+BACKLIGHT+SOFT RESET simultaneously?
Because I have read almost all the threads regarding STUCK uni and I never came across one with a screen like yours.
On the second thought...press Backlight+Soft reset simultaneously...what do you see?
Click to expand...
Click to collapse
1. If i press zero, Uni show "Cleaning now" message and after about 3 seconds turn off;
2. When i press POWER+BACKLIGHT+SOFT RESET there is no any results. What this keystrokes mean? I didn't know it before;
responderman i can't send command via mtty cause it don't wanna to open USB port.
Man,I am no techie,but really want to help you.
MaximKorobov said:
1. If i press zero, Uni show "Cleaning now" message and after about 3 seconds turn off;
Now,Forget mtty.
First PLEASE charge the battery 100%,use another unit if neccessary to charge.
You said When i press POWER+BACKLIGHT+SOFT RESET there is no any results. What this keystrokes mean? I didn't know it before
What do you mean by that.
1.You cannot enter the bootloader
or
2.You don't know what the bootloader is?
And did you uncheck usb connection in AS,remove SD and SIM during MTTY....just to be sure
And finally PLEASE read this thread...It is really helpful..though old.
http://forum.xda-developers.com/showthread.php?t=259003&highlight=universal+dead+stuck
Click to expand...
Click to collapse
"1.You cannot enter the bootloader"
But now... it's funny miracle.
I try POWER+BACKLIGHT+SOFT RESET again and it's go into bootloader (previously - no, just empty screen).
5 minutes and new rom installed successfull.
Thanks you guys!
It was very bad half week with a brick.
Well i'm glad we got there in the end. Can I recomend reading up in the WIKI to get to know things a bit better. Welcome to the forum
Glad to help!
Good to hear that.
And yes please search,read wiki,and please please name your threads in such a manner so people can understand what it's really about.
And I am glad this thread can be closed now.
Hi all(be kind I am over 50 and a newbie)
I have been looking in these forums for some time while
I save up the cash for my S710.
Well I just got a Vodafone V1415 and I love it but I hate the vodafone
splash screens when you turn it on and there wall paper.
So I would like to flash my V1415 with a rom off here, my V1415 is not unlocked
and I understand by doing this it still wont be.
Could some kind person please put me right if what I need to do is wrong please.
1, I need to do what the guy says here
http://forum.xda-developers.com/showthread.php?t=330909
2, Then flash the chosen rom I was thinking of this rom
http://forum.xda-developers.com/showthread.php?t=414416
The kind gentelman says it is WM6.1?
would it have all the extras WM6.1 has over WM6.0?
if anyone thinks/advise me on a diffrent rom that would be nice
Thanks
deuse
PS thanks for a great site
EDIT= I have no storage card is this ok?
Hi.
I am also new to this kind of thing, but I'll try and explain it a bit better than it is there.....
Do a hard reset first, switch phone off, then while pressing and keeping pressed, the two soft keys (above 1+3 keys), switch on until promted, then press the green call key, and wait for it to finish.
1. Download and run SDA_ApplicationUnlock.zip from the computer, follow instructions until reboot.
2. Download Vox USPL- CID BYPASS.zip, once extracted run "uspl_116_jockyw", follow insructions, which is just pressing any key, until it asks if you want to run mitty or "RUU", and stop there.
3. You should have already downloaded WM6.1 CLEAN v1.4, and it is the "FLASH" program in that folder you need to run from the computer, follow instructions and you're done.
I've only just put the same on 5 mins, and wrote this while waiting for it to load.
Happy flashing!
Thank you very much I will try what you said now
Hope i dont make a mess of it
Well after a few trys it worked
The first time I got a linux screen and it would not flash?
2nd time I let the uspl_116_jockyw run till the end by pressing Y
it went to a multi color screen and flashed
I am very pleased with the result
thanks.
Hi,
i'm trying to install the newest radio 2.22.19.26I, and i found that in to install http://jf.odiness.com/RC33/RC33radio_update_testkeys.zip
i copied the file into my sd card, and rename to update.zip
i install that stuff... and puff¡¡¡¡ now i only could see the vodafone splash.... anyone could help me?
Thanks
===
I have read some forums on here, xda, to unbrick G1, and i saw something to do that, but i don't have acces to the adb interfaces, none it's connected case the terminas, when it's on, only say "vodafone" splash...
help pleaseeee
no soucy
did you make a backup (to restore backup you should have haykuro spl)?
another solution : take your sdcard from the phone and put it in your pc.
then replace the update.zip file by a new rom (haykuro made one in english or another one in multilanguage based on french sfr htc magic)
put sdcard into your htc and make the same think (home+power) and apply update
don't worry, your htc isn't dead
Hi neomorfeo,
I'm not being helpful here but I just want to ask, where did you find the radio update?
As far as I know (maybe I'm wrong) that radio update, it's only for the G1, not for the Magic.
For example, if you go to the official HTC webpage, you will see that they clearly say that the ota-radio-2_22_19_26I it's only meant to be for the G1.
It should give an error when applying to the Magic.
Cannot you enter in recovery mode booting with "back" + "power" buttons and using fastboot to reflash the Magic?
wasss:
no i don't made a backup, tought a radio update doesn't make that brick..:'( (bad thinking...)
i'm trying the second option you gave me, but i cna't go into bootloader or whatever....
i'm so worry, cause the vodafone splahisn will be on for 30min and still there, i can't touch any button, well i could touch them, but the phone do nothing.,..
rommein:
i get that radio form the net, check the link, bu don't do that please..:S you'll make the same to ur phone...
try pulling the battery to turn off the phone.
then switch on as wassss suggested with HOME + POWER.
If you can see the ! menu with an image of the magic, press again HOME + POWER and you will see a menu.
If you see in one of the options, update from sdcard, or something like that, you can breath.
Download the HTC Magic firmware from the french guys:
http://forum.xda-developers.com/showthread.php?t=518461
Copy it to the sdcard and rename it as update.zip. (you can do this step in the computer).
Once the phone has the sdcard inserted and you are in that menu that i told you, click update.
It will reflash a correct firmware again.
rommelin:
i can't go to that menu, case the combination do nothin (HOME + POWER) and (BACK + POWER) .....
thanks for helping.. but i think i have lost it...
any other idea?
low volume + power?
if that doesn't work... i'm running out of ideas.
We need you to get into fastboot or recovery in order to apply easily any update or rom.
I think you will need to remove your battery to clear the Vodafone splash screen.
Replace your battery.
Switch on while holding down both "Volume - " and "Pwr" to get into fastboot
no... down vol + power doesn't work.....
i know we need to go to fasboot or something like that....
wow, now i'm desesperated....
hope someone could help me...
thanks anyway rommelin
just to be sure: in order to make any of these combinations to work, you need to be sure that the phone is switch off and that you press the 2 buttons all the time until the phone starts.
You should not release any of the 2 buttons until you see that the phone is booting. Otherwise it will not enter in fastboot, hboot or any menu.
duplicated
yes, i try to push taht buttons many times, and remember i'll do it before, if not, i can't brick my magic.....
and for reset/poweroff it's only posible removing the battery... pufff.... nothing seems to work
something new to add for information....
now i plugged my magic to the usb connector, and the light it's red.... buut i fully charged it before do the change....
ok, as you said, i guess that you know how to enter in recovery but itjust doesn't work.
I'm not experienced with bricked android phones, I was lucky until now.
I know that there are quite a few post in the dream forum about brick phones.
Maybe they can help you more than us.
We are new players in this world but there are guys in the dream forum that are really masters in this platform.
Just sorry for not being of much help.
Let us know if you get any positive feedback from them so we can learn all from this.
yes, if i'll get it, i feedback to u.....
now searching...
neomorfeo said:
something new to add for information....
now i plugged my magic to the usb connector, and the light it's red.... buut i fully charged it before do the change....
Click to expand...
Click to collapse
Red !!
The only colours I've seen are:
Orange = Charging
Green = Fully charged
Blue = eh can't remember, fastboot
Flashing Blue = New e-mail
me too....
that's why i'm scared... cause i began thinking i need to buy new one...:'(...
as we said before, i'll try searching in dream forum, but at the moment nothing...
Are you in the UK?
If so I'm sure everyone got at least 1 months insurance included with new contracts and upgrades. It may leave an option open to you.
I hope you get things sorted.
no i'm at spain, i think i have still time to change it for a new one, but need to wait until tomorrow.... i'll tell you bout that..
.
one thing abot the keys.... if i push teh trackball + powerr. it doesn't boot up, but the led it's blue....anyway i can't connect with the pc ....
when it is in the endless loop with the vodafone logo, connected to the pc, if you type "adb devices", does it says anything?
what about "fastboot devices", although i guess it will not say anything?
just trying to think about anything