Related
bad lucks. suddenly the touch screen doesnt work.
Dont know why. Try to hard reset and and cant use at all
does any1 have got this problem before
Finally works
waks finally it works,
I leave it for a while and do a charging for it.
Cause I though the battery should be in cold condition (winter time in Ozi)
And yeah it works, so if you guys found this problem try above solution and see if it works
noramly it works for 5 -10 min then it geting Fu&#d agein
sadly, this is happening to me as well. What apps have you installed? You're not by any chance using Sprite Backup 6? This problem only started when I installed Sprite Backup...conincidentally, I had a similar problem with my HTC Herald after using same programme, it may reset the backlight to off.
no i dident use sprite backup i had a lot os SPB stuff but i dot think it is any thing to do with it as HARD RESET dose NOT help ;(
what OS do u use Windows Mobile 5 or 6 ?
when it hapened to me i was on WM5 (i had it replaced)
recently i instaled WM6 on my new one it works great !
there was a post about some one having the same problem wich was FIXED by Upgrading to WM6 u shuld try it maybe !
if u will tellme if it workes !
u also cen unlock Ext_ROM and Get rid of ATT junk compleatly and u will get Unbranded ROM (it better if u not on ATT network in mi opinion)
maybe this is just a stupid thought, but do you use screen protectors?
i applied the one which palm has deliverd with it and shortly after that the screen didnt work. any hard- or softreset didnt help.
after removing it everythings works like before
nehvada said:
maybe this is just a stupid thought, but do you use screen protectors?
i applied the one which palm has deliverd with it and shortly after that the screen didnt work. any hard- or softreset didnt help.
after removing it everythings works like before
Click to expand...
Click to collapse
NO i dident use any screen protecters
interestingly, mine just failed the same way as yours just 15 minutes ago. Tried rebooting and eventually hard reset, samething.
I noticed it would work when it prompts "touch screen to begin calibrating". Once the screen is touched, the keyboard backlight lits up, and screen wouldn't respond anymore. If I tap the screen the keyboard backlight would flicker very slightly.
I am running WM6, NO APPS INSTALLED, no screen protector, fresh 2 weeks old phone.
Now I have to figure out how to revert it back to WM5 so I can send it in for replacement.
By the way, if you pull the battery out and let the phone sit for 10 minutes, it will cool down and act normal for few minutes. Enough to do the touch screen calibration thing in case if you are stuck there.
steph280 said:
By the way, if you pull the battery out and let the phone sit for 10 minutes, it will cool down and act normal for few minutes. Enough to do the touch screen calibration thing in case if you are stuck there.
Click to expand...
Click to collapse
yep...my treo exhibits exactly the same symptoms. It only started after I started using Sprite Backup and Handango Inhand. I have now turfed both and propose doing a hard reset and reinstall but don't hold out too much hope. I reckon it is basically a return to Palm job.
Waks it back to old problem again
Dont know why it doesnt work again
Try to upgrade to wm6 seems doesnt help at all.
This is my third Treo 750.
The other two had all a defect touchscreen.
It's a hardware problem.
nehvada said:
maybe this is just a stupid thought, but do you use screen protectors?
i applied the one which palm has deliverd with it and shortly after that the screen didnt work. any hard- or softreset didnt help.
after removing it everythings works like before
Click to expand...
Click to collapse
Mine also failed within a day of applying a screen protector. I got a new one from the AT&T store (still within my 30 days) and haven't had a problem since.
I don't want to go long w/o a screen protector, though...
Hello There,
I'm from Portugal and i bought 1 MDA Compact on TMobile. I Unlocked it with XDAdev v 1.6 and it works great in my network. After i done a stupid thing. I flash it with a wrong rom and it "Dead" . To recover i Reflash with a Jam_10605_169_10500 ship and it return to live. Now power on and let me calibrate stylus but when try to enter in the main screen apear a White Screen. I can manage and view all with Sync, but nothing more apear into Handset.Only a white screen. Can you help with this please.
Dear Marco,
Usually that's a sign that your LCD is broken. I've got one extra magician with exactly that same problem. Everything works but not the LCD, which seems to be dead. To confirm it, i've tested this "broken" magician with a good LCD and i can see everything...
I guess that you have done something extra besides only upgrading the ROM...
Hi
I have a question on the phone (touch screen). Few weeks ago I installed a cooked rom, than after two weeks, the touch screen just die on me. I have no idea what happen, I never drop the phone on the ground or in the water.
Than I send it back to HTC, ask for repair. You know how much HTC ask for the fix the phone? $425.00. WTF!!!!!!!!
Now I ask for help here, will the cooked rom damaged the phone? Any way I can fix the touch screen?
Please help.
Thanks
PS. If this time No one can help me fix it, will anyone here buy the phone from me?
First...what ROM? Did you Mess with any registry settins regarding the touch screen? When you say "died", are you talking about it not turning on, or turning on and not responding? Hard reset?
I do not want to post what rom i use before.
I did not mess with the registry. Touch screen (hold screen) is no response. I try soft reset and hard reset. I also try to install some new rom. on the OS setup screen, i cannot do anything since the touch screen did not response any more.
Any idea????
why don't you want to say what rom you use ?
energyrom...
But anyone can help me out here?? Any idea???
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
If it is defect, you can replace your touchscreen for low costs. I paid 20 euro's for my new touchscreen. You also need an T6 torx to open your mobile.
negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
Get a new digitizer on eBay, fairly cheap and easy to replace. Can get one to match your housing color. Less than 20 Euro for sure.
thanks for reply back soon..
there is no way to recover my touch screen??
any technical way to recover my touch screen, techies help me out...
I don't seem how you could 'repair' it. I think it is broken or not. Or the connecter is not in the right position. If so you must open up your mobile either way. I think it's best to just replace the touchscreen it also removes the scratches if you have those. And it's very cheap.
thanks cywood.. its not broken, just it stops working..
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
digitizer
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.
jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
in your case, it will probably be fixed with a hard-reset.
jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
use mymobiler using that u can control ur mobile thru ur computer google for it
praveen_y76 said:
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.
Click to expand...
Click to collapse
Hi Praveen,
from where u got the digitizer...? was it original?
mine also stopped working two days back. I am in chennai and just heard that HTC has opened a new service centre here so maybe i can try out my luck there.
negaboys said:
i recovered my touch screen..
i have wrote here http://www.negablog.co.cc about how i recovered my touch screen without replacing digitizer.
Click to expand...
Click to collapse
could you please give the exact link where you have mentioned about it?
Thanks
crapula512 said:
in your case, it will probably be fixed with a hard-reset.
Click to expand...
Click to collapse
The hard reset fixed my problem. I also had corrupt files on my microSD card, so I formatted it as well.
Its amazing how many problems that look like hardware issues are actually software/file system issues.
For those who jumped right to "replace the screen" as a solution, I believe you need to rethink your troubleshooting strategy, as you'll convince people to spend time and money performing a fix action that doesn't work.
mohitsapru said:
use mymobiler using that u can control ur mobile thru ur computer google for it
Click to expand...
Click to collapse
That is a great program! I've heard of it before, but never thought I would need it. It looks useful for getting screen shots from your mobile device as well.
Thanks!
repeated screen alignment problm
hi guys,
a month back my elfin screen stopped responding,after searching threads,i foundout that the digitizer was dead so i replaced it .touch response came back,but now every few mins i have to align the screen to have proper response.i m using onyx6.5 /mikys/ahen roms of latest build.and lower part of screen was not responding for touch some times,so to align screen was not possible as start button was in lower part in newer builds,so im starting roms of older builds in them start button is at top,where i came somehow reach screen alignment page.i m not able to find what is wrong wth my device??whether the digitizer was not working properly???
is there anyone who faced similar problm??any one there to help me out????
cant able to bypass alignment screen?
go here http://www.negablog.co.cc i had wrote about how to bypass the screen alignment screen,
change a new screen
Solution
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!
Hi Folks,
Here is my story.
I have replaced my broken digitizer on HTC Sensation. At that point i was not aware of multiple versions of digitizer's in e-bay & Amazon and i need to select the right one stuff...From this thread
I realized after replacing & touchscreen was unresponsive.
With inputs from From this thread, i tried to RUU, then realized that i have to S-OFF. But in the process of trying to do S-OFF,[touch screen not responding] while connecting to a PC, phone is not detected [May b that i have to select USB debugging option in phone]
So, am struck now & can anyone help me what is the way out now?
Thanks
eamkay said:
Hi Folks,
Here is my story.
I have replaced my broken digitizer on HTC Sensation. At that point i was not aware of multiple versions of digitizer's in e-bay & Amazon and i need to select the right one stuff...From this thread
I realized after replacing & touchscreen was unresponsive.
With inputs from From this thread, i tried to RUU, then realized that i have to S-OFF. But in the process of trying to do S-OFF,[touch screen not responding] while connecting to a PC, phone is not detected [May b that i have to select USB debugging option in phone]
So, am struck now & can anyone help me what is the way out now?
Click to expand...
Click to collapse
You might have to reinstall the broken digitizer and root/s-off the phone then replace it... You need the touch screen to do some of the s-off steps...
pottyvick said:
You might have to reinstall the broken digitizer and root/s-off the phone then replace it... You need the touch screen to do some of the s-off steps...
Click to expand...
Click to collapse
Thanks for reply, Looks like no other way around..
Will try fixing old one....
broken digitizer
Hi. can anyone help me to fix my HTC sensation? I buy it with broken digitizer but will still work perfect, and after i change it start to do this problem. Ween i push button to unblock screen don't want to does not want to react instantly, i must move my finger on digitizer about 3-4 seconds to respond normaly. Have you ever encountered this problem? know any solution?
i try to install another room but same problem...
How do you remove the digitizer? Is the heat the front and ply it with a guitar pick the only way to do so? My digitizer ain't broken, but my lcd got wet and I want wipe the stain off.
I have the same problem. what make it worse is that I have cut the ribbon of my old screen. Could anyone help out, if there is other way to do it?
Thanks
Hi there they're is a great instructional video on you tube on how to replace the digitizer on our device, if I remember correctly there is also a video on you tube on how to open and take apart our devices. I have watched the digitizer replacement video and its extremely helpful, advising on exactly how to do the procedure . Go over to you tube and take. Look at the video . I think it will be extremely helpful! Best wishes and hope I've helped!
Sent from HTC sensation 4g, S-off, rooted with revolutionary, running Viper Rom, Sense 4.1, firmware 3.33, Kernel -xxxPachaxxx PYDX-stable 2, Mugen battery 3500mah, Please press thanks
Have a question related to this (don't wanna start a new thread).
If I want to replace a cracked screen do I need to buy the digitizer, lcd, or both? My screen is cracked but works perfectly fine as usual.
Unresponsive HTC Sensation XE Beats Touchscreen
I'm having same problem, replaced old touchscreen :
PYD V1.1
SW-10 94V-0
E308252 1145
With (? = missing letter or number):
PYD V1.0
B?-10 94V-0
E?082521123
The touchscreen is totaly unresponsive . On top of this I didn't care about the old digitizer
and cut the flex cable, now I'm stuck with an Sensation XE Beats with an uresponsive screen,
if there is a fix arround this I will highly apreciate. :fingers-crossed:
I tried to find exact same touchscreen model than the old one, but can't seem to be found.
Is there someone with the same old digitizer who replaced with other model number that perfectlly work or partially?
There is this fix in an other tread : http://forum.xda-developers.com/showthread.php?t=1360638
But impossible to do as touchscreen doesn't respond.
Also could it be possible that the new touchscreen is defekt?
I read in the other post that new touchscreen worked at least partially, this one not at all.
Thank in advance for any answer.