Related
Under WM2003se on my XDA2 and XDA2i it keeps breaking, and causing screen corruption when I reinstall.
Under wm2005 it's perfect.
Any ideas on this?
On my 2i the intellipad works fine most of the time, but then after so long it doesn't appear. If I try to change to the default keyboard then the icon in the bottom right changes, yet the keyboard does not appear. Similarly if I then try to change it back to IP, the default keyboard icon remains and I have to soft reset.
I'm on an o2 xda2i, but now using the iMate 1.11 WWE ROM and it happened to me again last night, so it's not the 1.10 ROM in itself.
Ant
Yup same for me, except sometimes I have to actually reinstall from the cab file
Works perfectly well under WM2005 in an XDA2 though.
I wonder if it's a specific application that causes it to break?
OK it's broken again, and no amount of soft resets, or re-installs of either the v1.0 or t-mobile customised pad will get it working again.
If I could get that working perfectly, I would be able to give up WM2005 for most things, and use my xda2i for practically everything.
http://www.pocketpcthoughts.com/forums/viewtopic.php?t=41421&postdays=0&postorder=asc&start=10
Too many resources are being consumed by Today plug-ins, other SIPs, etc.
I removed some Today plug-ins and lo and behold, my IntelliPad re-emerged!
Woohoo! Leave it to a PPCT guy to come to the rescue!
I could kiss you! (in a manly non-gay way of course)
It's worked, that was one of the main things that stopped me ditching the XDA2 with WM2005, now I am quite happy to use the XDA2i with WM2003se with intellipad
Thanks for replying here or I would never have seen that
<<<happy guy
Has anyone managed to get tomtom working on wm6?
I cannot for the life of me work out how to stop it crashing after about 20 seconds of it running. Ive tried 5.2.
Well, TomTom 5.2 runs smoothly on my Tornado, using the Fortuna Clip-On Bluetooth GPS receiver. No crashes at all!!!
A latest PPC version of TomTom 6 Navigator (V6.201.7160) works perfect on my SP5 w/ WM6 or WM5.0 before, but the virtual mouse SW i.e. FakeCursor should be used with occasional conditions.
Its really stronger than TT5.
Heres the original package of TT6 (delete the .cfg file unless u like the chinese interface)
and the crack
Enjoy!
Admint edit: Links have been removed warez is not allowed!
How does Fakecursor work?
Everytime i tried to use it, i got problems with the backlight of display.
i cant thank you enough.. thanks for posting this!
what maps work with this? i need a great britian map.
also its very slow, the black screen and red hands splash screen stay on for a good 30 seconds.
i spoke too soon.
it hangs on the screen with the arrow after the hands. like its crashed.
i think i have a memory problem.
i'll try overclocking.
overclocking works. ive managed to get to the screen where you pick your langauge but there is no cursor to select anything!
ive pressed every button and moved my joystick in every angle and i can only change the volume and not pick a language therefor not go on to set up the rest of tomtom.
this is driving me mad
Same problem here. I've managed (after about 30' of waiting, screen after screen) to reached the Time Format selection. Couldn't go further!
Lanny, are you sure that this version runs perfectly?
i cannot get fakecursor working
Guys u should create a shortcut of FakeCursor as long_camera.lnk (or any other button u like) in windows root w/ FakeCursor.exe, NOT in storage card.
Otherwise u cant do anything after TT's logo screen.
This version i posted runs pretty good on my SP5 w/ North American map v.665.1294 for 4 days after i installed the WM6 OS from jm012a9749.
Anyway,its a PPC version,so u must use FakeCursor to change lang., maps and edit the address when u input the wrong one.
You can press hold the camera key to call out the FakeCursor anytime when u use the TT. If u wanna stop it, u can press the home key to go back to the homescreen and press the back arrow to go back to the TT's screen, then the FakeCursor will be cancelled automatically.
create shortcut
Guys u should create a shortcut of FakeCursor as long_camera.lnk (or any other button u like) in windows root w/ FakeCursor.exe, NOT in storage card.
Otherwise u cant do anything after TT's logo screen.
This version i posted runs pretty good on my SP5 w/ North American map v.665.1294 for 4 days after i installed the WM6 OS from jm012a9749.
Anyway,its a PPC version,so u must use FakeCursor to change lang., maps and edit the address when u input the wrong one.
You can press hold the camera key to call out the FakeCursor anytime when u use the TT. If u wanna stop it, u can press the home key to go back to the homescreen and press the back arrow to go back to the TT's screen, then the FakeCursor will be cancelled automatically.
FakeCursor for Smartphone
This is the FakeCursor w/ shortcut i used on my SP5, try it.
thanks i got another cursor thing working called sphelper. when ive passed all the settings i cannot get bluetooth talking to tomtom with my gps reciver.
'no gps signal'
aha, u should add a new device in phone's bluetooth setting first and create a new outgoing com port for your GPS reciever. After this step, a new com port, usually com6 will be added in TT's bluetooth setting screen. Well, choose it and enjoy!
thanks a lot
i wonder if tomtom will release a smartphone version of tomtom 6 in the not so distant future.. or is it pda only from now on.
I think its no chance to get a separate smartphone version even was told it surport PPC and smartphone platforms with one software when the TT6 was unveiled last year.
I hope the all new TT7 can surport smartphone exactly.
Tomtom 5.20
I had the same problem (Not function TOMTOM 5.20) and I have it solved. Only problem was missing file "CurrentMap.dat" in folder "\\\WinCE Device\My Documents\TomTom\".
TomTom 6 with WM5 & WM6
I read throughout all the postings to find a solution. I installed TomTom 6 v 6.010 (and had it running fine) on my original Tornado (SPV C600 running WM5) using the method described in earlier posts (copy the files manually to the device) I was able to plan routes. No issues here. However, after installing the WM6 rom (and following the same process to install TomTom) the following happens:
- TomTom starts with the black splash screen/red hands
- I get the green warning page where you need to click "Agree" and immediately, the program quits (no time to press the Agree button) and a message pops: "Your device is incompatible with TomTom NAVIGATOR"
Now what is interesting is the following:
- If I revert to WM5 (original Orange ROM) and do the same steps for TomTom, I get the exact same behavior (same message:Your device is incompatible with TomTom NAVIGATOR). BUT if I apply the patch send by Orange Security Unlock (Cab sent by orange for my IMEI), it works fine.
- So, I reinstalled WM6 and tried to apply the same patch, it will not apply and comes up with an error: "You cannot use this CAB file with this device". I thought the reason was maybe because the operator was not showing. So I used TyphoonNBFTools to put back the original operator and reflashed. Same error when applying the patch
_ So next step was to use the change in registry found on spv-developers. That change does an application unlock but still does not allow Tomtom to run. There might be other registry settings that prevents this.
Has anyone found a solution?
Thank you
I have the same problem when i installed TomTom6 in my new WM6 OS first time.
But, after i changed following registry values, everything was fixed. Try it!
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000001
"0000101b"=dword:00000001
"00001001"=dword:00000001
"00001005"=dword:00000028 (or40)
By the way, i used the V6.010 at first, now the latest version V6.201 works smoothly on my SP5 w/ WM6 OS.
lanny said:
I have the same problem when i installed TomTom6 in my new WM6 OS first time.
But, after i changed following registry values, everything was fixed. Try it!
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000001
"0000101b"=dword:00000001
"00001001"=dword:00000001
"00001005"=dword:00000028 (or40)
By the way, i used the V6.010 at first, now the latest version V6.201 works smoothly on my SP5 w/ WM6 OS.
Click to expand...
Click to collapse
Thanks for the info. I wished I waited a bit longer. I ust bricked my phone following instructions at http://www.spv-developers.com/forum/showthread.php?t=7484
Thanks again
hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas
I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!
Channels don't work.
in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels
ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+
mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.
Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?
Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.
unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!
The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.
tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.
bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.
Anyone know which one works properly with bluetooth and announcements?
thanks
MS Voice Command
I use MS Voice Command v1.60.4622.0; it works fine . I've made an update from the older Version v1.5, which didn't work on the TD1 either.
I have to admitted, my TD2 arrived only 3 days ago, so I couldn't use voice command for hours, but making a call ist very easy, the speaker of the TD2 is of good quality.
and what about announcing incoming calls by dictating the caller ID name or incoming phone number? I was trying it with MS VC 1.6.19971 without success :-/
Hi,
which button is VC using?
Regards,
Rodik
Drobix said:
I use MS Voice Command v1.60.4622.0; it works fine . I've made an update from the older Version v1.5, which didn't work on the TD1 either.
I have to admitted, my TD2 arrived only 3 days ago, so I couldn't use voice command for hours, but making a call ist very easy, the speaker of the TD2 is of good quality.
Click to expand...
Click to collapse
is it possible to use the button of ear-phone?
in the setting i found only button 1....
thx
try http://ae.inc.ru/aebplus.php it is working
neveceral said:
try http://ae.inc.ru/aebplus.php it is working
Click to expand...
Click to collapse
Can you tell me which button you remaped?
no one knows? i tried every button in the list and also its not possible to set it up as a new one.... damn i need this!!!
You can map it in settings, personal, buttons. Select MS voice command from the list on the right. This will then also work with bluetooth headset button.
I can't get incoming caller announce to work on any UK version.
no, there is only button 1 shown!
also i need this for a wired headset, no bluetooth crap
I'm using MS Voice Command v1.60.4622.0 and everything works as it should. I have mapped the long press call button and it works with a bluetooth button as well. It works with both hands free units I have in our two cars and also with the Garmin Zumo on my motorbike. Caller id announcements work also as long as your bluetooth unit supports that function.
ok, it works for me with bluetooth as well, but i want to use the button og my ear phones! i love music and there is not good solution for bluetooth. so in the next days i get an adapter to use my high performace era pohnes and i would like zo use vc with the button on this adapter! the problem is it doesnt work with the one includet!! so please dont tell me it works with the blue one!!
ok, got it!
go to:
hklm\software\oem\voicecommand\
create string key "Path" value "\program files\voice command\voicecmd.exe" or whatever
gl
incubus
Did you fix call announcements?
This registry edit gets announcements to work:
Edit this registry key:
HKCU\ControlPanel\Sounds\TTSAnnounce\Category
Change from VoiceCommand1 to Ring
It should now work, but sounds level is low. To increase the sound level, I did this edit:
HKCU\Control Panel\Sound Categories\Voice Command1\AttenutationCategory
I set it to 4 which is decent, you can go to 5, but I see no difference going louder. Using 0 or 1 will make it whisper quiet.
If that does not make it louder, then edit:
HKCU\Control Panel\Sound Categories\Ring\AttenutationCategory
Same thing, set to 4 or 5.
damn, doesnt work for me...!
Did you restart?
Edit:
This fixed it on my TD2 with MSVC UK1.6, the same version loaded on a Touch Diamond this fix didn't work. This program really is so odd.
sure, not only once, i also spend some time waintig, thought it could take a while but nothing! using vc1.60.4622uk... i think i will wait for wm 6.5 and the new integrated vc
I had problems with starting via Key 1.
I made a shortcut of voicecmd.exe und assigned the shortcut to key 1.
Works now via key 1.
Bluetooth headset key worked before.
Path in registry didn't help
v 1.60.4622 de
Hi,
What i did, to get MS Voice Command v1.60.4622.0 French version
retail, working with bluetooth Callerid's announcement:
i installed it (ps: dont forget to activate the notification via bluetooth, obvious but i forgot that before trying many manipulations ;-) )
All worked except notification via bluetooth
(i eared the ringtone instead of callerid)
i tried to replace some V.C files by the 1.6.192.13, because that was working with my Kaiser stock rom 6.1(but noway with the Topaz)
http://forum.xda-developers.com/showpost.php?p=2186001&postcount=254
(also tried with 192.14, 199.71,199.65,19209 but be careful some of the VoiceCommand_PPC.cpl versions made my topaz always rebooting the key to solve that worry was to replace via activesync the cpl file before the pin prompt, via explorer from desktop in the topaz/windows folder )
finally i uninstalled all, reinstalled retail 1.60.4622, Desactivated voice command (step quoted below perhaps not necessary, up to you)
And replaced the three files
VoiceCommand_PPC.cpl in /windows
VoiceCommandWMP.dll in \program files\voice command\
voicecmd.exe in \program files\voice command\
by those version 1.6.192.13
(ps: replacing VoiceCmdRes_PPC.dll with v1.6.192.13 as said in the link above made voicecommand crash when activating it)
Click to expand...
Click to collapse
All was working except the bluetooth announcement:
After i tried the regedit (backup first !!) given at the begining of that thread
hklm\software\oem\voicecommand\
created string key "Path" value "\program files\voice command\voicecmd.exe"
Edited this registry key:
HKCU\ControlPanel\Sounds\TTSAnnounce\Category
i renamed the DATA of the string "category" from:
"VoiceCommand1" to "Ring"
to increase the volume i set to 4 the AttenutationCategory in
HKCU\Control Panel\Sound Categories\Voice Command1\
After a reset, announcements via bt are working
greetings
wm 6.5
Does MSVC work with the newer Sakajati ROMs based on 6.5 or not. I have a tad of ADD and can't keep up
My brother's AT&T Fuze (WM6.1 latest AT&T ROM 5.11.502.2 WWE) is configured roughtly the same as mine. On his TouchFlo 3D Wireless Manager page, the on/off sliders are in the wrong place and too large. The text vertical alignment is messed up. See attached pic. He thinks he first noticed this after installing .NET CF 3.5 but is not positive. What gives, how can this be fixed?
ermm have u tried reinstalling the ROM then checking it without installing NET CF?
try reinstalling the comm (wireless) manager before performing a hard reset
Check out AssassinsLament's Comm Manager suite w/ Wifi sharing
I realize a hard reset would no doubt fix this problem, but am looking for a way to avoid having to reinstall apps and reconfigure the phone. Perhaps I should have pointed that out in my first post.
try reinstalling the comm (wireless) manager before performing a hard reset
Check out AssassinsLament's Comm Manager suite w/ Wifi sharing
Click to expand...
Click to collapse
That looks interesting and I might use it on my Fuze but I would prefer his phone to stay vanilla. Is there any way to reinstall the comm manager that is bundled into the latest AT&T ROM 5.11.502.2 WWE?