Hello everybody,
here is my problem I've been trying to fix for some weeks now:
I'd like to synchronize my O2 Xda Diamond Pro with Thunderbird and Lightning using the FinchSync tool, which does not really work, unfortunately. The FinchSync homepage states a probable source of my problems which is that I am lacking the toolhelp.dll. Unfortunately again, it does not say where or how I can get this dll.
Can anybody help me with that? I've never done any developing on Windows Mobile so I have no idea how to extract it from some .cab file or the like, or even which one might contain it.
BTW, my Xda Diamond Pro runs Windows Mobile 6.1 and has an ARM1136EJ-S processor on a Qualcomm MSM7201A RISC Chipset. Hope that helps.
Best regards
Ingo
Related
Hello,
I just have my HTC Cruise a few days ago, I would like to know, If
it's possible to connect my Cruise to LotusNotes V7 instead of MS outlook.
If yes could please to help me, how can I do?
Thank you somebody to help me.
Indasvo
There used to be a program called Intellisync that could connect to Lotus Notes, not sure if it's still around, try to Google it.
M
indasvo said:
Hello,
I just have my HTC Cruise a few days ago, I would like to know, If
it's possible to connect my Cruise to LotusNotes V7 instead of MS outlook.
If yes could please to help me, how can I do?
Thank you somebody to help me.
Indasvo
Click to expand...
Click to collapse
You have two choices:
Lotus EasySync 4.2.5 (this version is the first and only EasySync Pro compatible with Windows Mobile 6). Unfortunately, the IBM Software Catalog only show the version 4.2.4 (why ?... don't ask me, ask IBM ;-) )
The alternative is to take Sybase XTNDConnect PC. In fact, Lotus EasySync is based on XTND...
The advantage of XTNDConnect PC is that it is compatible with a wide range of device including all the Windows mobile and Symbian devices
The following devices are supported:
NEC phones
Nokia phones
Palm devices
Sony Ericsson phones
Windows Mobile devices
Good luck !
Thanks a lot Academic for your reply,
I think that I'm going to try with Lotus EasySync.
Next way ... via Blackberry!
indasvo said:
Thanks a lot Academic for your reply,
I think that I'm going to try with Lotus EasySync.
Click to expand...
Click to collapse
I've tested both and finally choose XTNDConnect PC 6.5. Much stable and complete than Easysync Pro. Also fully support for Notes 8
Windows SideShow for Windows Mobile is an application for Windows Mobile 5 and 6 PocketPCs and Smartphones that allows you to use your Windows Mobile device as a Bluetooth SideShow device. Installation instructions are below. This is a beta release.
http://www.microsoft.com/downloads/...84-f862-4e02-a2b0-0003b4565f34&displaylang=en
I've not got this working with my wm6.1 ipaq ppc (classic) with widcomm stack.
please let us know if you get it working with your device (hw&sw versions) and any comments.
Also if you find any gadgets that you recommend let us all know.
Samsung i600 is working perfectly, but there are very few sideshow gadgets and most of them suck .
The mobile app says it is a beta and has expired, does anyone know if there is a newer/better version out there I've been looking all over the place and cant find anything? Am I the only person who thinks sideshow is really cool???
i am also getting a similar message that beta has expired ... any help
Just found this
http://blogs.msdn.com/sideshow/archive/2009/01/06/windows-sideshow-for-windows-mobile.aspx
hope we dont have to wait too long...
New version available
http://blogs.msdn.com/sideshow/archive/2009/01.aspx
Ive had the cab for this for ages, but only recently have I had vista to be able to use it.
Ive had it working well on:
HTC S710 VOX
HTC P3450 ELF
HTC P3450 ELFIN
Doesnt seem to work on my Polaris, doesn't seem to save my user name. Always get asked to "Selected Current User" and can never turn on any gadgets in windows. Anyone else with the same problem?
thats what the expired cab did for me. have you uninstalled the old one and reinstalled the new one?
i'm using it for the media centre gadgets, but i have TV Pack 2008 and they dont work with it :-(
i've been waiting years for sideshow and now the thing i want to use it with isnt suported
nlhall said:
thats what the expired cab did for me. have you uninstalled the old one and reinstalled the new one?
i'm using it for the media centre gadgets, but i have TV Pack 2008 and they dont work with it :-(
i've been waiting years for sideshow and now the thing i want to use it with isnt suported
Click to expand...
Click to collapse
yeah tried to install the new one but doesn't work. Apparently Microsoft are working on this but I don't think they will release anything soon. They stated that "We have seen this issue, and are investigating the cause. It seems to be sporadic." Testing this on Windows 7 beta so don't know whether this is the cause or whether it might be the ROM I am using.
Hi
I have an HTC Touch HD with Swedish Windows Mobile 6.1. I very much want to use the PIM program called Pocket Informant. But when I try to install it, I am told that my platform is not supported
Is there any way that I can still go ahead and install it? Or is there a great chance that it will not work, even if I should not be able to install it?
I am quite annoyed that I cannot easily replace my Swedish OS license and installation with an English one, but that's another discussion....
I guess my question merely is; Is there a tweak that can be carried out, to run English Windows Mobile programs on non-English installations? I don't know Windows Mobile that well, so I have no idea whether this would actually be possible.
On Windows based PC's, this works. So I thought it might be the same on Windows Mobile devices?
Hello, I'm searching for a chef to cook something good for my HP iPaq Data Messenger, I think this pda has a lot of potential, but the built-in WM6.1 is too slow and buggy
It would be great to have a good ROM for this phone! Thanks to everyone that's working on this!
ROM 6.5 help me, please
I have a HP ipaq data messenger. But I can't find any ROM 6.5 anywhere.
Please help me. I have only used windows mobile for 2 week and have no experience with it.
Show me how to cook, please.
Thanks.
Welcome to forums
Not sure if HP iPaq Data Messenger is made by HTC, have a look here:
http://forum.xda-developers.com/forumdisplay.php?f=259
Hope it helped,
orb3000 said:
Welcome to forums
Not sure if HP iPaq Data Messenger is made by HTC, have a look here:
http://forum.xda-developers.com/forumdisplay.php?f=259
Hope it helped,
Click to expand...
Click to collapse
I know it is the same to HTC, but maybe GSM software, GSP software is difference.
Anybody have tested?
ROM 6.5 for HP ipaq data messenger (HP Oak)
I have tried to find ROM 6.5 for HP ipaq data messenger (HP Oak), but not found
Please help me or please cook for me.
Thanks
I am looking for a new version of Windows Mobile for "HP iPAQ Data Messenger".
Can anyone tell me the code name or the HTC Gert, which is identical in construction?
Hi guys,
did anyonbe identify the ata messenger?
Which HTC version would it be?
tx
any updates?
There should be no reason why it can't be updated. The old ipaq got a update.
I'm also looking for the WM6.5 update for the HP Data Messenger, HP Oak, but no luck!
Not sure if compatible choices is the right move?
Anyone tried?
Not to be found
Also looking for WM 6.5 ROM for the Data Messenger, but so far I've had no luck and I have looked for it vigorously !
Also looking for data messenger 6.5 rom
Hi I am also looking for data messenger 6.5 ROM, anyone cooking it?
I will donate to anyone how can have a 6.5 rom for data messenger.
Thanks
Guys, there is currently no 6.5 ROM out and I doubt there will ever be one since the Data Messenger was discontinued November 2009. (In other words, none are gonna be made anymore, those around are the last ones).
I think all you guys want is a phone with more eye candy and touch friendlier. So I recommend these apps that I have on my Data Messenger to make it awesome:
SPB Mobile Shell
Opera Mobile 10 (Free)
Resco Explorer
Resco Photo Manager (Or you can go with the free HTC Album App)
HTC Dialer (Free)
ROM
Hi, thanks for that list, I already installed mobile shell and the phone is a lot more usable and stable but still it sometimes crashes.
I gather that HP won't release any new version for it, but I was hoping that someone here would try to cook a rom for it.
Thanks
It is the worst device I have bought in my all live!
No assistance, no Update, no Battery live, too many bugs... too many crash...
I was forced to buy a new device.
HP... never more!!!
ANOTHER Data Messenger ...
wen i bought it 10 months ago i was pretty sure that it can be valid(hp...)
i found it unusable but i installed several applications, and now is more eyecandy...
Home Screen ++
personlized, Pocket cm contact
Pocket cm keyboard, enhanced file explorer,
Mortplayer(but it crashes really often)
and various other things...
but now is a bit slow...
i can cook a rom but i can't find resources;
what kind of program i need? and about compatibility or driver?
if you have possibility to find a wm6.5 to kook i'll be pleasured to create a rom...
Thanks to all!!!!
Somebody can help me?My HP data messenger was can't boot anymore.When i hard reset after that it's doesn't come back.How can I do that?
I want to boot from computer.Can I?
hey guys, im really sorry but i dont know where to post this first. so i'll just start here.
im after some info or/and advice about my ipaq hx4700. now i know this model is pretty outdated... but i like it .
now my problem is that some of the software i am trying to use only works with Microsoft bluetooth stack.. but the ipaq hx4700 comes with built in Widcomm drivers. is there anyway that the widcomm drivers can be replaced with the microsoft ones? i understand there may be conflicts along the way,but is it possible? maybe via editing registry? or if not... are there any apps/software/drivers to mimic the microsft bt stack? maybe progrmmed visual studio??
ive tried every rom i could get my hands on.. from windows mobile 03/05/06/6.1/6.5 most of them are 'cooked' roms, but still wrong divers. good OS tho. i have read a few pages on 't'internet' where ppl have replaced micosoft drivers with the widcomm drivers via registry + installing the DLL files,but im not sure on how to reverse the situation with the appropriate drivers. i can do this operation in Windows XP but not really familier with CE. ive also read that you can extract the ROM and change part of the OEM section, then rebuild and flash. i have all the software and hardware for such operations, but for some reason i cannot extract any of the ROMs :/
Any help or advice would be really great.
Thanks.
Gaz