Related
Hey all, first post long time reader.
Please dont flame me, i have tried to search for the answer but seem to be going nowhere.
Is anybody getting the Error [262] while using KaiserCustomRUU.exe? I just flashed Dutty's DualTouch v4, that worked great! Now i am trying to flash the radio, i have heard good things about 1.27.12.17. It will not flash, I have followed the instructions over and over again. It gets to the point where it shows the completion bar, it gets stuck with 0%. I follow the instructions, pull the battery out and try again, no luck. I have noticed that during the process active sync goes from green to grey. (I think this is supposed to happen) But the odd thing is that the "Local Area Connection" (for the phone) in Windows XP Network Connection disappears. I am guessing this is my problem. Does anybody know what causes the phone to disconnect from the computer? Or am i doing something obviously wrong.
Any help is appreciated.
also - after it locks up at th 0% screen, and after i receive the error 262, i then unplug the phone from the computer. when i do this, windows makes the sound of a USB device getting unplugged. so does that mean i really didnt loose connection, and the error 262 is due to something else?
Did you use Hard SPL Before flashing.Is a must to not brick your phone.
http://forum.xda-developers.com/showthread.php?t=334679
Read carefully and will be OK.
Yes i have used HardSPL. I have already flashed with Duty's DualTouch ROM, and it WORKS. It was really easy and painless. For some reason I can not get the radio to flash. From my understanding, HardSPL only needs to be done once. That changes the bootloader, i think? Either way, I already did the HardSPL, flashed the ROM, just want to change the radio now. As the instructions said, this can be done after I flash the ROM using CustomRUU. Any thoughts?
I am going to go ahead and try to flash a custom flash screen. Will post back results
I tried using the CustomRUU to flash Kaiser with new splash screen, but no luck. Same error as before. Good news is that the phone still works!
If you are shure about Hard SPL (you can check again if is rited OLIPOF) "Hold Camera + Power buttons together and reset with stylus"-to enter in Bootloader and check again.
If is correct I sugest to reflash with original HTC Rom (wich include radio ) and after that start again with HardSPL --- Radio --- ROM upgarde
For hard spl http://forum.xda-developers.com/showthread.php?t=334679
For original and other info http://forum.xda-developers.com/showthread.php?t=332246
and one of the best link for reverting http://forum.xda-developers.com/showthread.php?t=335568
Good luck !!!
ok so i go into bootloader, and i get
KAIS1*0
SPL-1.56.0000
CPLD-8
i had followed the insructions from this thread - http://forum.xda-developers.com/showthread.php?t=334679
- HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)
looks like i did something wrong? it does not say OLIPOF
any ideas? can i just do it all over again, and be safe?
thanks for your help.
You had some luck to flash cooked ROM without Hard SPL.Be more carefuly and read .Those guys work for us to be protecyed from breaking our phones
yes but read carefuly:
Please make sure ActiveSync is enabled (GREEN icon in systray)
and hit ENTER to start...
Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...
Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...
Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...
Process is finished, congratulations!
I see what you are saying. So some how I managed to just flash on the JumpSPL, and bypass the last steps of flashing HardSPL?
So now I should follow http://forum.xda-developers.com/showthread.php?t=354061
do step - "if you want to flash a hardSPL then run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC"
or do you suggest i just try to install HardSPL over again.
damn i suck, i thought i was being careful.
try Hard SPL but follow the instruction and don't hurry wait for every message from that window
That thread is just in case your phone don't enter in bootloader
will do, thanks for your help!
its definetly not my first day using a computer, flashing ROMs, etc. damn i feel like a complete newb
hey it worked. thanks for your help. if you are ever in chicago, PM me. i owe you a few beers.
No problem .Glad can help.
OK
I've always had troubles flashing radios for some reason, I've managed to just not do it but now with Duttys 6.1 out I really need some help
- I've flashed Duttys latest successfully
- I've flashed HardSPL
- But whenever I flash the radio (1.64.08.21) I get a connection error at 99%!!
Now I can still get into the phone using mtty and the boot command.
Am I doing something stupid -- Any help gratefully received!
Alex
ps - I have a UK o2 XDA Stellar
I'm a newbie been here with a AT&T Tilt less than a week and I promise I'm reading, but I'm having the exact same problem. Flashed Duttys dual V4 as my first try last Tuesday without a problem and of course be a crazy new guy I wanted his newest work. So I flashed Duttys 6.1 today and I guess I just can't figure out how to flash radios, because I've tried 2 now and both error out at 99% and I too have to use mtty to get back into the phone. I'll keep reading, but if someone could tell us new guys what the heck we are doing wrong that would be great.
PS I'm glad to be here and this looks like a lot on fun thanks for having me and look forward to helping out someday.
JMan
Hey Alex! I figured it out Brother! Do this and you should be able to upgrade your radio. I was using JumpSPL1.56-KAIS run from my device and I was running into the same problem everytime I tried to upgrade my radio. Would get to 99% and then would error out. So I followed these steps taken from a number of different post and put together until it worked!
1) Make sure you have JumpSPL1.56-KAIS somewhere on your device the file for me is in "my docs" on my Tilt.
2) Run kaiser-HardSPL from your PC with your device hooked up via usb with the green act sync icon. Once you get to the white screen of death on you device, stop unplug you device and soft boot it via your stylus and the reset button. Leave your pc alone right where it stopped in the kaiser-hardspl screen. "should be to the point where it says unplug and replug in your usb you should have the tri color screen press enter to proceed"
3) Now set your connection settings in active sync to not allow usb connections.
4) Now plug you device by in via usb and run Jumpspl1.56-kais on your device. When it has the tri color screen and says usb, unplug usb and plug back in.
5) Now back in the kaiser-hardspl window, continue on with the on screen directions. This should now install hardspl just like the rom or roms that you might have already installed and will say finished.
6) The device should reboot.
7) close the kaiser-hardspl window and let you device fully reboot.
8) Once it is fully rebooted follow these directions: Perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up
9)Now run your radio update and it should go through without erroring out at 99%. It will stay at 99% for a bit then jump to 100% success!
My Tilt is working great now with sound and everything. Have not tested anything else yet, came right here and started to let you know what I did to get radio installed.
So now I'm running Duttys WM6.1 newest release with radio 1.64.06.
Call me crazy and sure I know I might have taken more steps than I needed to, but I got it working.
Hope this helps you.
Take care,
JMan
First, are you using a 6.0 rom or a 6.1 rom? If you are using a 6.0 rom you cannot flash any of the 6.1 radios and vice versa. Also, if you have hardspl installed, why would you need to use jumpspl. I have never used jumpspl and I promise I have flashed 50+ times counting, roms, radios and splash screens.
I believe that was my problem, I was never able to get Hard-spl installed and I was using jumpspl to install the 2 roms that I have installed since I got my tilt a week ago. The method I used above allowed me to get hard-spl installed and then I was able to install the radio rom. I am using Duttys WM6.1 rom.
JMan I want your babies!!!
Ok I had actually done everything upto the final step (holding the camera button after a soft reset) but that made it possible to flash the radio just as you described.
So many thanks for sharing your solution!!
Alex
jmandss said:
Hey Alex! I figured it out Brother! Do this and you should be able to upgrade your radio. I was using JumpSPL1.56-KAIS run from my device and I was running into the same problem everytime I tried to upgrade my radio. Would get to 99% and then would error out. So I followed these steps taken from a number of different post and put together until it worked!
1) Make sure you have JumpSPL1.56-KAIS somewhere on your device the file for me is in "my docs" on my Tilt.
2) Run kaiser-HardSPL from your PC with your device hooked up via usb with the green act sync icon. Once you get to the white screen of death on you device, stop unplug you device and soft boot it via your stylus and the reset button. Leave your pc alone right where it stopped in the kaiser-hardspl screen. "should be to the point where it says unplug and replug in your usb you should have the tri color screen press enter to proceed"
3) Now set your connection settings in active sync to not allow usb connections.
4) Now plug you device by in via usb and run Jumpspl1.56-kais on your device. When it has the tri color screen and says usb, unplug usb and plug back in.
5) Now back in the kaiser-hardspl window, continue on with the on screen directions. This should now install hardspl just like the rom or roms that you might have already installed and will say finished.
6) The device should reboot.
7) close the kaiser-hardspl window and let you device fully reboot.
8) Once it is fully rebooted follow these directions: Perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up
9)Now run your radio update and it should go through without erroring out at 99%. It will stay at 99% for a bit then jump to 100% success!
My Tilt is working great now with sound and everything. Have not tested anything else yet, came right here and started to let you know what I did to get radio installed.
So now I'm running Duttys WM6.1 newest release with radio 1.64.06.
Call me crazy and sure I know I might have taken more steps than I needed to, but I got it working.
Hope this helps you.
Take care,
JMan
Click to expand...
Click to collapse
You are the STAR! Trillions of thanks. Solve my problem!!!
I love it when when the new guy can help out! Glad it worked guys, and thanks to all the old pros around here for allowing us to read so we can try and help ourselves out.
Take care,
JMan
I think I have fallen in love with this thread. This is truly nice to see guys. Keep up the great work.
i've the same problem, but when reboot Appear immediately hardspl, but i can't re-install nothing !
please help me
I don't want to miss mi tytn
pedro_se_rooot said:
i've the same problem, but when reboot Appear immediately hardspl, but i can't re-install nothing !
Click to expand...
Click to collapse
You need to use MTTY to get things going for you again, here is the thread to get mtty:
http://forum.xda-developers.com/showthread.php?t=371154&highlight=mtty
Search around and see if you can find the step by step to use it, might even be a how to text file in the zip file not sure. This should get you back on your way.
Can someone locate the step by step to use mtty for this man and put it in this post?
Have a good one,
JMan
Not a good day for the Wolfpack, Damn Tarheels!!
I'm new in the world of flashing cooked ROMs
and i need to do it but i can't
Everytime i try to Flash HARDSPL 3.xx, it stops at the percentage screen and gives me an error on my pc.
And i tried to flash the ROM directly, and same problem.
I'm getting nervous of this stupid mobile, please i need Help.
I read all posts on how to install everything but nothing completed to the end.
bebo833 said:
I'm new in the world of flashing cooked ROMs
and i need to do it but i can't
Everytime i try to Flash HARDSPL 3.xx, it stops at the percentage screen and gives me an error on my pc.
And i tried to flash the ROM directly, and same problem.
I'm getting nervous of this stupid mobile, please i need Help.
I read all posts on how to install everything but nothing completed to the end.
Click to expand...
Click to collapse
you should go here ...
I had a problem when I first did mine. at the tri-color screen my phone never said USB on it and my computer showed an unknown usb device. Here's what worked for me but remember you only need to do this the first time, Once you have HardSPL flashed your phone will work like normal.
after your phone gives you a warning that a program is going to reboot it. You get a tri-color screen. As soon as you see this screen hold the camera and power button and press the reset button, don't disconnect the usb cable.
In other words the program that causes your phone to reboot doesn't allow the usb to work properly but a manual reboot into the SPL using the camera/power button does. I have not tried the "Forced USB" version of HardSPL because this problem goes away once you get HardSPL installed.
This would be better posted in the HardSPL thread.
Flash an official stock ROM, then follow ALL the instructions in the link deepthroat gave you to the T.
So I was flashing my first rom (NATF) and as far as I know I did everything right. HardSPL first, no programs running, etc.
As I was flashing my rom, the installer goes "ERROR" and it says I need to perform these steps. So it says to unplug it, so I do. So it says to take out the battery, so I do. So it says to put it back in and see if I get the colour bars screen - and I do.
So it says to plug the cable back in... but it doesn't recognize it. It says Serial on the bottom instead of USB. What do I do?!
The USB port on my phone isn't broken, as when I plug my phone into my charger it will turn on. Automatically. But the computer won't recognize it at all.
try flashing via Micro SD. Instructions are over at the GSM Flashing for noobs post.
I put an image file on the SD card, I turn on my phone, it goes to the regular tricolor error screen, then it goes white and says loading or something, then it says "Error no image file" and then goes back to the tricolor screen.
I don't know what to do now.
PwnCakes tried a lot of things with me, but none of them have worked so far. Anyone else??
had that problem on my tilt. It was solved by the higher powers at xda by using a jump spl and then flashing to a hard spl. Do some research and find out who made the jump spl and PM him, he is the only one that can help.
From what I've found out about JumpSPL, it is for HardSPL problems. But HardSPL installed fine.
Plus, one of the directions was to connect my phone to my PC - and my phone won't connect to my PC.
you might have corrupted your bootloader and you must install a soft spl then jockyw2001 provide me with a force usb version of the hard spl to load and then all was well. Trust me PM these two guys and they can help.
Thanks man. I'll PM them now.
Ok. I've had problems up and down and tried and tried to do this and finally got it. So now I'm going to share it with all of you.
1. Download and Unzip the Files in the thread for the Ozone Verizon (HardSPL) posted by JockyW.
http://forum.xda-developers.com/showthread.php?t=551458
2. Connect your phone via ActiveSync, let it sync, and then start the auto.bat.
3. First, the JumpSPL will copy over. Press enter on the computer. Then the SSPL will copy over. Press Enter on the computer. Then it will prompt to start the JumpSPL. Press Enter. JumpSPL should pop up on your phone. Press the silver center button to start JumpSPL. The screen goes black. Then the DOS window will ask you if you have USB Connectivity. DO NOT PRESS ENTER YET!!!!
4. THIS IS VERY IMPORTANT!!! Wait for your phone to disconnect from ActiveSync. Once it does, unplug your phone from the USB. Go into ActiveSync's Connection Settings, and uncheck the box that says ALLOW USB CONNECTIONS. Reconnect your phone to the USB, and it should install the HTC USB Sync driver. NOW PRESS ENTER IN THE DOS WINDOW.
5. The RomUpdateUtility will start up, run it. And it should do the HardSPL on your phone. Your phone will restart when it's finished. If you want to check, before you do any of the above steps, copy the EnterBootloader.exe over to your phone. When you're done with the RomUpdateUtility and the phone has restarted, run the Bootloader and see what the tricolor screen says. It should be 0.39 Hard. Pull the battery, put it back in, restart the phone, and you should be good to go for flashing custom roms!
WOOHOO!
Thanks guys! I'll be donating soon. I'm about to flash the custom 3VO ROM right now! I'll let you know how it goes!
::EDIT:: The 3VO ROM is beautiful and runs like a charm! You guys put so much work into this.
Let it be known that this method for flashing the HardSPL can also be used for flashing the 3VO ROM.
NOTE: I WILL NOT TAKE RESPONSIBILITY FOR BRICKING YOUR PHONE.... seeing as I was scared I almost bricked mine once, and was VERY LUCKY that I did not. Please, follow all directions carefully. Phones are expensive.
ActiveSyn Doesn't disconnect
I got to the step where JumpSPL runs and my screen goes black. However, my phone never disconnects from ActiveSync. I tried unplugging it and disabling USB in activesync, but then my phone comes up as Not Recognized. If I try to run JumpSPL at this point I get, "Error (260): Connection." Any ideas?
How long are you waiting for ActiveSync to disconnect? It takes awhile. I know for me, it took about 5-10 minutes for it to disconnect.
Try waiting a little bit longer, and let us know what happens.
I waited long enough for activesync to stop. I unplugged my phone, disabled USB in activesync, and reconnected my phone. Every time I get a error saying "USB Device Not Recognized." If I try to run the update utility I get a connection error.
In all fairness I bricked my phone initially and had to recover it using a "stock" ROM someone posted for the CEDAR. My phone might just be hosed.
wm 6.5
quick question, the only way i was able to unbrick my phone was by upgrading it to the wm6.5 rom by Verzion, will the HardSPL work with this one?
I flashed the HardSPL on the Verizon 6.5 Update. So I guess the answer would be Yes.
I'm really lovin' this 3VO ROM. It's fast and the battery last a lot longer.
i tried your method and i'm still coming up with SPL-0.39.0000
i've tried other peoples guides as well and cant get it to hardspl, any ideas?
I followed all of these steps a few different times and my Bootloader still says .44. I tried varying the steps a little based on what users said on the thread about putting the HardSPL on the .39 and it still didn't help. I'm going to keep trying various configurations, but if anyone else is able to get their Official 6.5 ROM over to the 3VO, I'd love to hear how.
Thanks
what i need to know is what is hardspl i have an ozone that is unlocked but the data area is still locked to verizson and thats why i need to flash so i need to know what is hardspl and if its needed for an unlocked ozone
recoshaa said:
what i need to know is what is hardspl i have an ozone that is unlocked but the data area is still locked to verizson and thats why i need to flash so i need to know what is hardspl and if its needed for an unlocked ozone
Click to expand...
Click to collapse
You can find the hardspl definition here http://forum.xda-developers.com/wiki/index.php?title=Glossary
If you want to install a custom rom you will need to hardspl your device.
I hope that helps
I ran auto.bat, when the updater failed I disconnected USB from phone, reconnected, then ran updater manually and it all worked. Had to do this on both the HSPL and the ROM.
Also, make sure you don't uncompress both to same folder as it creates a .nbh file and if you have both on same folder you might be trying to install the ROM instead of the HSPL or vice-versa.
Another note. If you are HSPL already you can turn off device, turn it back on pressing DOWN VOLUME and POWER, leave both pressed until you get to rainbow screen, you can then run the updater and it won't bug you with battery being less than 1/2
I had problem that after screen goes blank, the phone will not connect. Some time "HTC USb Sync" will show, some time not. ROM Update will always complain that phone was not connected.
This is what I did to solve.
1. Power Off.
2. Hold vol dn and send with one hand. Then power with other hand.
3. Choose restore default configuration.
4. Let it boot
5. connect to ActiveSync.
6. Now run auto.bat
7. It runs fine and HArd SPL is loaded.
Enjoy.
schoenkn2 said:
quick question, the only way i was able to unbrick my phone was by upgrading it to the wm6.5 rom by Verzion, will the HardSPL work with this one?
Click to expand...
Click to collapse
Hi there, not sure if this belongs here. If you're planning on putting a custom ROM on the Verizon Ozone, do not use the HTC/Verizon wm6.5 update! "!! DO NOT !!" With the original stock wm6.1, you have a .39 Bootloader. After flashing the HTC/Verizon wm6.5 Stock Rom, you have a .44 Bootloader. And you can forget about putting a Custom/3rd Party ROMS. If somebody knows how to fix this, please tell me.
Thanks, and enjoy your HTC!
JD