Database Info

Skype driving me mad!

I use skype on my XDA IIs and as I travel a lot I find it a cheap and easy way to chat to my kids.
The problem is that every time I turn on my phone or it gets any kind of message or connects to my wireless router to sync with my laptop I get the following message.
'cannot execute \storage card\skype technologies s.a. 1.0\skype.exe'
Thing is there's nowt wrong with the storage card, now I've uninstalled skype it still says that. I even bought SK Tools to try to rid myself of this but it remains and the damn thing means now I wake up to a flat battery every morning.
Can someone point me towards the file I have to edit to stop this and of course a suitable editor. I am guessing the initial problem was caused by me installing skype to the storage card.

Anyone?

hey! maybe you should look again into the "Notifiy Que" in SK Tools. Look attentively at every entry there and remove everything that has got to do with skype.
Alternatively you may reinstall skype, do softrest (take attention not to run the skype app after restart!) and uninstall skype again via SK Tools --> Uninstall App
regards,
Quappo

The PDA2k seems to be slow in initially picking up the Storage Card on a power on.
People who use MP3 ringtones from their Storage card have the same access problem.

TheLastOne said:
The PDA2k seems to be slow in initially picking up the Storage Card on a power on.
People who use MP3 ringtones from their Storage card have the same access problem.
Click to expand...
Click to collapse
The SD drivers are known to be slow at both reset and power on, there is a definate lag - this is documented by WebIS (the Pocket Informant people) and Spb Software House. It is recommended that anything the can be considered a system service or which interacts with the Today screen be installed to the Main Memory.

quappo said:
hey! maybe you should look again into the "Notifiy Que" in SK Tools. Look attentively at every entry there and remove everything that has got to do with skype.
Quappo
Click to expand...
Click to collapse
Brilliant, worked! You can't know how much hassle this has caused me. I'm happy it is solved, thanks very much.

Activesync Network sharing

Recently i started to use activesync to share internet connection over BT with my pc, it works fine, though i have two questions:
first one is the synchronisation wizard that pops up immediatly after my wizard connects. i've noticed that i need to close it for net link to be established. I'd like to disable it somehow, so that i don't need to get anywhere close to my PC to connect, it's quite annoying. I even tried to capture the AS window with my own software to close it, but was unable to recognize it properly. any chance to do it?
other thing is, when i use usb to sync with AS, i am able to acces lan resources with total commander. I was hoping i can do the same with BT connection, but so far i was unable to locate the proper solution for this idea... would be cool if i had it working, i used to do it over wifi, but i prefer using BT now, help anyone...
thanks in advance guys

Still nothing, i'm stuck with this problem, would be grateful for any solution

Life can be so cruel...
So just for your information guys, problem is solved. though im rather mad about it, as it happened an ugly way;]
so i;ve finally managed to create an application that captures proper Activesync windows and closes synchronisation wizard, so that my xda establishes connection without me even touching desktop pc. thats fine. i just couldn't remember where in registry to place my app so that it opens when i connect (i don't like the idea of my program just sitting in windows tray all the time), the idea is cool, it's almost finished, i go google. "activesync registry"
first result is this...
http://www.pocketpcfaq.com/applications/undocumentedactivesync.htm
you can't imagine how angry i get... ;]
anyway, there's no need for my program to exist, i just change/add one registry value, thats it...
just why couldn't i find it for over a month, and i did right after i found another way to solve it??? life sucks ;]

HUGE problem-8525

i need some serious help. i installed the program Device Application Locker (DAL) and it seemed to not work. after an uninstall of the trial and a restart of my cingular 8525, i get all sorts of errors. whenever i try to open programs on the phone such as file explorer, camera, games, messages...literally everything; i get an error reading the file "file name" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file. i tried a hard reset and i get the same message with file name ' ctlpnl'. i need help, i just got this phone and it was a lot of money. how can i fix my phone? how can this even be possible if i cant access file explorer as well? PLEASE PLEASE HELP ME.
EDIT:im really freaking out now. i cannot connect my 8525 with active sync through the USB... when i attempt to connect it says on my device, NOTIFICATION ERROR cannot execute repllog.exe, is there an alternate way to connect and try to reinstall the program to try and reverse this mess or is there a way i can reinstall wm5 to factory settings?

yes but
i would love to hard reset the phone but i cannot access any of my apps. i can view them and once i click on them such as clear storage for a hard reset i get this message , ctlpnl.exe this file 'ctlpnl' cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file. how can i possibly do so if i canot connect active sync with usb oraccess file explorer. theres got to be an alternate way.

search on how to do a hard reset. theres like 3 ways of doing. i think like holding the camera button and the green button and press the soft reset button and hold it. something like that. just search and you'll find the answer . so no need to freak out. you'll be fine.

WOOOhoo
LoL, i am loving you guys more and more, not only is this a fantastic website, the people are great here too. the alternate hard reset is holding the 2 soft buttons and entering the stylus into the reset hole. thank you so much i need to set up my device now. let you know how it goes. thanks again!!!!

it all went smoothly, i feel like i just won a prize or something. this definitly made my week, i was trying to figure out when was a good time to drop another 500$. thank you all so much for the help

no problem, will do. and the SPB programs are of my choice too. i like them.

[A] Mapping Network Drives using HTC's Network Plugin

I've tried using Resco Explorer 7.05/Total Commander 2.5.1/HTC's Network Plugin
For some reason i can't seem to map network drives.
In resco when i try to connect to a drive it tells me it's not accessible
In Total Commander it just doesn't connect
In HTC's Network plugin it writes: "Map Drive Failed"
-I'm using Vista on the comp i want to share folders in.
-Sharing works fine on all comps other than in my PPC (not password protected)
-It seems as not only it doesn't map the drive but doesn't acknowledge as anything but the computers on the network exist. no folders inside those computers. Thought about changing my ppc's domain but i don't know how to do that.
any help would be appreciated.
thanks

Yeah, VISTA FILE SHARING is a bit tricky! You not only have to share that particular drive / folder; you also have to check the settings in the SHARING CENTER - in addition you might have to adjust the file permissions as well.

Everything is perfect on file settings. i have a network running 3 computers and 2 laptops all sharing folders no passwords all permissions set. only thing not able to read the folders is the PPC. It finds the comps on the network but doesn't show the folders.

Did you MOUNT the drives in RESCO? You can't just click on it in the FILE EXPLORER - tap and hold, then select MOUNT DRIVE or FOLDER (depending on what you're sharing).
What RESCO VERSION did you use?

dude... i can't see drives nor folders.
i'm using 7.05
for the record, i tried looking at a winxp comp instead of a vista one.. can't see anything.
tried accessing through ip and name.. both come out with nothing..

I wish someone would help with this also. I have two computers and 1 ppc on my home network. My ppc(HTC Titan) used to be able to access both computers. Then all of a sudden it stopped working for my main computer(bedroom) with all MY files on it, but it still accesses files on my second computer(upstairs). On the main computer(bedroom) I can access the shared folders of the second computer(upstairs), but the second computer can't access the files from the main computer.I dont know whats wrong, but it seems more like a computer issue. I operate Windows XP on a Dell. The network folder used to work perfectly for me and I can't put my fiinger on what's blocking it.
This might be the wrong thread to post this issue(maybe the wrong website) but I thought I would ask since the issues are similar. If it's a ppc program for accessing the shared folders on a computer, then someone should have a How-To or a check list of how to set both up for the program to work fluently. Can somebody please post what you need to do on the computers to ensure sharability of the file systems.
The reason why this is so important to me is because I have been hooking-up my Titan since may 2008 and I am near completion. I'm totally done adding app's and the functionality of the device is superb except for this issue. Just bought a 16gb micro sdhc card and that works great. My girlfriend just ordered a seido 3500mah extended battery with the door to fit and a rubberized hard case for extended battery fit. I'm so excited about have the best phone setup of my life but I everytime I go back to this issue I get pissed off. It was all good til about 4 months ago and I don't know why it suddenly stopped working. Please HELP!!!

If the HTC Network plugin is not locating your shared files on your network, this likely suggest that it is an issue with your network settings. I suggest playing around with your security settings; however, I just recently had a problem accessing any of my shared files over any of my computers between each other and between my HTC Device. It just suddenly stopped working. I knew that I didn't change any settings myself and had tried many things to try to resolve the problem without success. I then decided to run my anti-spyware programs and Anti-Virus programs and let them run overnight. In the morning, the Anti-spyware removed several things - One was labeled as high risk and the others were low and the Anti-Virus found two high risk viruses. Everything was taken care of automatically and voila - I had no problems connecting to my shared files with my computers or my HTC Device. I ran the spyware and virus check programs again and everyting was clean.

the problem is that i can't even map the drives. i can see the comps on the network using the HTC Network Plugin but can't do anything other than that. when i try mapping a drive it tells me that i can't.. for some reason.
i removed password protection...shared the drive... nothing works.

I am assuming you are trying to connect through WIFI -
Make sure that you are actually connected to your network. My device has on several occasions connected to my neighbours wifi rather then my own - results in not being able to access shared folders
Through HTC NEtwork plugin you are exploring the computer for the shared folders right? You say you can see the computers - when you click the plus next to the specified computer in the network plugin are you getting any results at all there.
Make sure you don't have (I don't know if this is what it is called) MAC address filter or password. One of my friends has an open WIFI Network but has MAC Address filter which stops you from actually being able to use the network. You can connect but that is it. You wouldn't be able to surf the internet at all through WIFI either if this was the problem.
If it is none of these, Maybe it is a Windows VIsta problem - I don't know, I have XP
Do you have trouble connecting to other shared folders on other peoples WIFI networks also? (people who have XP)

-XP doesn't work either.
-i can see the comps, so i'm obviously connected to the network.
-i have mac filtering - see previous statement
-wifi works - see previous previous statement
dunno what to do.

Maybe something with your WIFI Settings on your device then?
Maybe you can review your settings on your device - Anythign that you think might be causing the problem - Describe it here, I will check my device settings (even though different devices - should still be the same - and will let you know if there are any differences. I must go eat dinner right now, but will check back after supper and bathing my daughter and putting her to bed. in a hour and a half two hours from now...

Set your desktop to support NTLM instead of just NTLMv2.
That way I got shared folders working with the HTC Network Plugin and my Vista desktop. Unfortunately some HTC apps (like HTC Camera) only expect your device to have two drives (internal ROM and flash card) so when you mount a network drive, they can't access your flash card.

Well, i can start searching, but if you don't mind, could you tell me how to do that?

nir36 said:
Well, i can start searching, but if you don't mind, could you tell me how to do that?
Click to expand...
Click to collapse
Start.
Run.
Type "mmc".
Ok.
File.
Add/Remove Snap-in.
Group Policy Object Editor.
Add.
Finish.
Ok.
Local computer policy.
Computer configuration.
Windows settings.
Security settings
Local policies.
Security options.
Right click on "Network security: LAN Manager authentication level".
Choose "Properties".
From the drop-down box, choose one of the first three options (you'll have to experiment).
Ok.

thank you very much. i will try it out and post the results

wow. it worked. WONDERFUL.
thank you SO much.

nir36 said:
wow. it worked. WONDERFUL.
thank you SO much.
Click to expand...
Click to collapse
I'm glad it worked for you.

everything seems to work great now... and very fluently. it's superfast.

feanor512 said:
Start.
Run.
Type "mmc".
Ok.
File.
Add/Remove Snap-in.
Group Policy Object Editor.
Add.
Finish.
Ok.
Local computer policy.
Computer configuration.
Windows settings.
Security settings
Local policies.
Security options.
Right click on "Network security: LAN Manager authentication level".
Choose "Properties".
From the drop-down box, choose one of the first three options (you'll have to experiment).
Ok.
Click to expand...
Click to collapse
I wish it worked for me too, but when I get to the "Group Policy Object Editor" I'm getting lost. I don't see that anywhere. Is my computer missing important files? I'm using windows xp. I hope I don't have to restore the whole computer to get the file sharing working. But if I gotta do it I will.the phone see's the computer, but no file sharing. It is that important to me to share files between my phone and computer. My home setup is sweet, and my phone is an extension of it.

Any Other Ideas
So, I have gone through and done everything suggested here. Lan Authentication, created private network, reconnect, everything I can think of...nothing seems to work
Does anyone have any further ideas about what could possibly work to create a LAN over WIFI?
Hardware:
Vista Business, Mogul 6.1 stock ROM 5.2.19208 and Folder Plugin build 30468.
DONE SO FAR:
Have created an adhock private network...connected to it on my device no problem. But when i go to search for my computer in network plugin under the browse menu it thinks about it and in the end doesn't see anything...
so, at wits end...I know I am new but most of the info over is fairly beyond my level I am certinaly a lurker and no info over at PPC Geeks with solutions...either way alot of the stuff over there comes from over here so thought I would see if anyone had some suggestions.
thanks for the help,
icn4d

[SOLVED] Can't Connect To Shares On My PC

For the last several months, I can download and upload to my shared folders on my Windows 10 Pro PC, with no problems at all using FX Explorer, via SMB2. Never a glitz or slowdown, no problems whatso ever, no matter what ROM I happened to be running at the time.
The problem I am now having started yesterday, when I installed the new Windows 10 Pro x64 Fall Creators Update on my PC. I did a clean install, and set up the system from scratch. I did all my Network settings for sharing, just like before, and I set the Share permissions on 2 folders that I use for my OPO, just like before. Made sure that SMB2 protocol is enabled on the PC also.
I created a new LAN connection in FX Explorer to the new Windows OS, and tried to connect. Well, it sort of does connect, but mostly does not. When I try to access the shared folder on my PC, I can see the 2 folders in the Explorer list-view on my phone, but when I try to enter either one of the folders, all I get is a spinning circle for about a minute, and then get a report in big red letters that there was a "Network Error".
Well, that's a first on the OPO, for sure! To double check that I had set up the new Windows OS correctly, I connected to the shared folders using a laptop via WiFi, and it connects and reads the contents perfectly fine. I then gave it a go with a second PC in the house, and that PC also was able to read/write great to the shared folders.
OK.... so, the folders on the main PC are in fact, being shared, and other PCs can access them, but my OPO cannot, no matter what I try. Like I said, it sees the shared folders, but when I try to enter either one of them, it just craps out. I've tried 3 different file managers, all with the same results. I've tried anonymous connect, and password connect, both with the same result.
I even disabled the firewall on my PC to see if that was the problem (which I did not do for the 2 PCs that did connect) , and tried again with my OPO, but no joy, once again..
I am totally baffled. I have spent probably the better part of 6 hours on the net searching for solutions and answers, including this forum, but again, no joy, and then trying all things I could think of to do. Does anyone have any idea what can be causing this issue all the sudden? Any ideas at all as to why this is happening? You have no idea how much I would appreciate a solution to this problem. I even went so far as to restore a complete backup image I had made just before upgrading the PC, and with the old image installed on the PC, my OPO would once again connect to the shares perfect. So, not a hardware issue with my OPO either..
Thanks for reading this long post!!