I tried to start my rather new xda diamond today, but the screen was grey with sand and I could not switch it on.. After few hours, I connected the cell to the computer and it gave me a message about the GWES.EXE problem. And it switched off again. Now there is no reaction wenn I try to swich it on.
What is this an GWES.EXE error?
Should I send the xda back to the seller? Is something wrong with the hardware or with the software?
Thanks in advance!
devushka said:
I tried to start my rather new xda diamond today, but the screen was grey with sand and I could not switch it on.. After few hours, I connected the cell to the computer and it gave me a message about the GWES.EXE problem. And it switched off again. Now there is no reaction wenn I try to swich it on.
What is this an GWES.EXE error?
Should I send the xda back to the seller? Is something wrong with the hardware or with the software?
Thanks in advance!
Click to expand...
Click to collapse
It is an OS error and usually can be fixed with reflashing of ROM. Diamond roms are aplenty here and if you check the XDA Wiki you will find official ROMs as well
But since you Diamond is too new, better send it to the dealer and request for system repair. But you may have to wait long before getting it back
EFN!!!!
Does you think on cook more for wizard?
maybe a manilla 2D?
Bye
+ Que PPC said:
Does you think on cook more for wizard?
maybe a manilla 2D?
Bye
Click to expand...
Click to collapse
huh???????
Related
I've tried this new version found here (http://forum.xda-developers.com/showthread.php?p=1769023) hoping that it would solve the freezing-on-incoming-call problem that I experience intermittently.
I've unionstalled the old version, rebooted, installed the new, rebooted again for the sake of safety, but it doesn't show up in the screen, even if I've enalbed it in Today settings.
Are you experiencing this problem too?
@mamaich, and the others: how can we solve?
Hi Bro,
I've totally given up with any version of HTC Home Today no matter how cool it is as it locks up the phone when receiving calls.
The only solution to avoid crash is to run in portrait mode which unfortunately doesn't suit me. Instead, I'll wait for HTC Shift's SnapVue to run in Uni, why not? It runs on HTC Athena!?
Cheers!
catch-22 said:
Hi Bro,
I've totally given up with any version of HTC Home Today no matter how cool it is as it locks up the phone when receiving calls.
The only solution to avoid crash is to run in portrait mode which unfortunately doesn't suit me. Instead, I'll wait for HTC Shift's SnapVue to run in Uni, why not? It runs on HTC Athena!?
Cheers!
Click to expand...
Click to collapse
yeah, even the HTC Home runs in the athena... it runs in the kaiser...and in the touch, too... so why shouldn't it run on the Universal...
argh... i hate the universal!!!
I think only a few of us are having the freeze/crash problem. Most Uni users don't seem to have any problems at all.
catch-22 said:
I think only a few of us are having the freeze/crash problem. Most Uni users don't seem to have any problems at all.
Click to expand...
Click to collapse
I don't think so. Most uni users switch ROM every 2 days and they don't use the PDA for anything serious at all.
If something suddendly stops working (as it is frequently the case) they just hard reset the device.
I want to use my universal and upgrade the ROM only when needed, when something really new comes out.
catch-22 said:
I think only a few of us are having the freeze/crash problem. Most Uni users don't seem to have any problems at all.
Click to expand...
Click to collapse
I am having the problem in landscape mode too.
thenext1 said:
I don't think so. Most uni users switch ROM every 2 days and they don't use the PDA for anything serious at all.
If something suddendly stops working (as it is frequently the case) they just hard reset the device.
I want to use my universal and upgrade the ROM only when needed, when something really new comes out.
Click to expand...
Click to collapse
Haha! Nicely put bro
HHMMMMMM So I am not alone
thenext1 said:
I've tried this new version found here (http://forum.xda-developers.com/showthread.php?p=1769023) hoping that it would solve the freezing-on-incoming-call problem that I experience intermittently.
I've unionstalled the old version, rebooted, installed the new, rebooted again for the sake of safety, but it doesn't show up in the screen, even if I've enalbed it in Today settings.
Are you experiencing this problem too?
@mamaich, and the others: how can we solve?
Click to expand...
Click to collapse
Hi guys,
I too get this same problem, and it is very annoying, and yes I do use my Uni for more than just a toy.
Hope we get a working solution soon
ciao
confirmed... hangs upon incoming call.... the phone would keep vibrating while all keys/buttons/screen area are locked, no way to answer it....does not stop so had to reset.
rnzk8 said:
confirmed... hangs upon incoming call.... the phone would keep vibrating while all keys/buttons/screen area are locked, no way to answer it....does not stop so had to reset.
Click to expand...
Click to collapse
you mean this new version? or the old version?
Nice to see "some" of you with the "crash on receiving calls in laptop mode" problem post here!
I use my Uni too as a PDA & a business tool & that made me to conclude that plugin is not for me. The plugin is a beauty but functionality comes first to me. Unless a solution can be found I've learned to live without it!
Going back on topic, haven't tried this version yet but the previous 2.xxxx versions installs well but causes the horrible crash.
rnzk8 said:
confirmed... hangs upon incoming call.... the phone would keep vibrating while all keys/buttons/screen area are locked, no way to answer it....does not stop so had to reset.
Click to expand...
Click to collapse
It's the same for me.... I have the latest Thingonaspring's rom. (
thenext1 said:
I've tried this new version found here (http://forum.xda-developers.com/showthread.php?p=1769023) hoping that it would solve the freezing-on-incoming-call problem that I experience intermittently.
I've unionstalled the old version, rebooted, installed the new, rebooted again for the sake of safety, but it doesn't show up in the screen, even if I've enalbed it in Today settings.
Are you experiencing this problem too?
@mamaich, and the others: how can we solve?
Click to expand...
Click to collapse
This is the newest i think: http://forum.xda-developers.com/showthread.php?t=327646&highlight=HTC+Home
wuwuwu said:
This is the newest i think: http://forum.xda-developers.com/showthread.php?t=327646&highlight=HTC+Home
Click to expand...
Click to collapse
I think the version i've found is newer... the version number is higher, and the file was posted just yesterday (29th december) ... in contrast, the version found at your link was posted on november... (but we may well give it a try!)
thanks tho...
HTC Home v.2.1.1005.722 is more then HTC Home v.2.0.1025.721
wuwuwu said:
HTC Home v.2.1.1005.722 is more then HTC Home v.2.0.1025.721
Click to expand...
Click to collapse
you are right
but i don't think that version has the VGA fix applied...
Anyway even the link pointed to by wuwuwu doesn't work. Same thing. HTC HOme selected in the setting but it doesn't appear.
me too have the same issue. I have switched to JW 1533 which i feel is the most stable ROM
Battery Drain
everbody is missing one thing....
HTC HOME IS DRAINING BATTERY DRASTICALLY.
farehmani said:
everbody is missing one thing....
HTC HOME IS DRAINING BATTERY DRASTICALLY.
Click to expand...
Click to collapse
How can you say that? When the device is in standby, no other program is running. When the device is on, HTC Home causes no major cpu usage (except maybe once a minute, when btw every plugin has a greater chance to use the CPU to redraw itself)
Hello. Yesterday I want to use my TC and it was off. Tried turning it on- nothing. When I plug it in to charge the orange light stays on for a second and then goes off. When its plugged in and I take the battery out, then stick it right back in the "smart mobility" screen pops up, it vibrates, then it goes blank again. Tried a hard reset and still nothing. Please help me. What´s wrong?
No injuries to my device.........
Thank you......
How old is the device? Did you flash a new ROM or something? Might be a battery problem. Try with a spare battery or something. Borrow one from a friend if possible.
The device is quite new, I think I bought it in april 2008. I flashed the new ROM from official htc web site in september.
I will try another battery.
Thank you
marekswan said:
The device is quite new, I think I bought it in april 2008. I flashed the new ROM from official htc web site in september.
I will try another battery.
Thank you
Click to expand...
Click to collapse
Hmmm....you flashed a new ROM from the official HTC website? Did your phone ever work since then? You might have tried to install WM 6.1 which isn't meant for the polaris since it ships with WM 6. Maybe that's what's gone wrong?
The phone worked with this upgrade very well.
[email protected] said:
Hmmm....you flashed a new ROM from the official HTC website? Did your phone ever work since then? You might have tried to install WM 6.1 which isn't meant for the polaris since it ships with WM 6. Maybe that's what's gone wrong?
Click to expand...
Click to collapse
6.1 was officially released for polaris i do belive, so this wont be the problem.
marekswan - have u tried leaving the battery out for half an hour or more, then put it back in and leave for min 3 hours.
Heavy usage does create problems for our polaris barrery, have u noticed it getting warm on heavy use (constant gps use for example)
If that doesnt work, and its in guarantee, take it back as they can test battery for fault and give u a replacement. I had a faulty battery after about 6 months and got a new one.
Just a thought, had u installed any new programs or flashed a rom? (soz cant remember ur sig whilst writing.)
Hi I have a problem with my O2 Xda II Mini,
Well here's the situation, my dad gave me his old O2 Xda II Mini.
So it is very old, so I recharged it with the charger connecting to the O2.
Then I entered the O2 OS, and it pops up a thing like self customize stuff.
After I confirmed the action, the O2 said it have to restart. Then I went to a screen that is blank with the word "Serial" on top and "v1.00" below. When I used a usb cable, the word "serial" changed to "usb", but to no avail my computer cannot detect the O2. I did all those restart or even hard- restart, the screen restarted and only went back to the "serial" screen.
I went through the forums and had a look at all those Rom and stuff. And I still can't figure out where the problem is. Please help me, thank you.
Sorry if i posted this on the wrong place, I really need help on getting this O2 fixed.
Timothyinspa said:
I did all those restart or even hard- restart, the screen restarted and only went back to the "serial" screen.
Click to expand...
Click to collapse
That's the bootloader.. maybe you can try to do a ROM update.
same here
i had that problem also, in symbian phones they call it "contact service", what u need to do is to find the right ROM w/ radio so it can work again,
sugui said:
i had that problem also, in symbian phones they call it "contact service", what u need to do is to find the right ROM w/ radio so it can work again,
Click to expand...
Click to collapse
Can you explain it better please...
I´m facing the exact same problem...
UP
Someone?
try to update ROM...follow instruction in the other thread
try upgrade to radio 1.12. i had the same problem, accidentally entering bootloader mode then i upgrade my radio and its fine, using cotulla's now i have WM 6.1
XdaII mini
Hi guys,
I had similar problems like you but following Cotulla's directions now my mini is running on WM6.1
Just visit his thread http://forum.xda-developers.com/showthread.php?t=504120
and the his site, follow his instructions and you will be amazed
i have HTC wiza 8125. the olde version of the os is corrupt and the screen goes off and on so i upgraded the ROM with windows mobile 6.5 but it still goes off and on
Rudolph Enam said:
i have HTC wiza 8125. the olde version of the os is corrupt and the screen goes off and on so i upgraded the ROM with windows mobile 6.5 but it still goes off and on
Click to expand...
Click to collapse
Not to be a bummer, but I had a Jasjar that did the same thing. Come to find out it was a bad motherboard on the phone. My heart was broken and I slowly watched it die. So it might not be the OS after all. Perhaps you can call HTC and inquire about a fix and see what they say.
Hi there..
I have JasJam, and it was ok until I removed the battery one day for some reasons, when I put back the battery the mobile was dead!!
when I try to charge it.. it shows red light instead of green!
I tried to follow some web-solutions so I removed the battery while the AC was plugged in, the red light then start flashing! I put the battery again but with no result! the red light is back.
I tried to hard-reset it, but even this was not working, it's not accepting the hard-reset!!
please help
nobody is there for help !!
I want to add something, I'm sure that battery is ok because i tried to use it in another device and it was ok.
alaziz said:
nobody is there for help !!
I want to add something, I'm sure that battery is ok because i tried to use it in another device and it was ok.
Click to expand...
Click to collapse
Hey there, im afraid it doesnt look good my freind. Are you still using stock rom or a cooked one?
Assume you cant even enter bootloader if hard reset doesnt work?
timmymarsh said:
Hey there, im afraid it doesnt look good my freind. Are you still using stock rom or a cooked one?
Assume you cant even enter bootloader if hard reset doesnt work?
Click to expand...
Click to collapse
Thanks for your reply.
that's right, I can't enter bootloader..
actually, my Jasjam fall in water before three days, but i dry it and it works normally for two days after!
then when I removed the battery and put it back the problem started!
is it possible that it's some kind of shortage ?
alaziz said:
Thanks for your reply.
that's right, I can't enter bootloader..
actually, my Jasjam fall in water before three days, but i dry it and it works normally for two days after!
then when I removed the battery and put it back the problem started!
is it possible that it's some kind of shortage ?
Click to expand...
Click to collapse
Id say it is a strong possibily yeah lol, pity you hadnt said that before
Id say your only option is to take it in to a service shop, although its probably cheaper to get a different machine im afraid!