Good evening ladys and gents,
after searching the www for an answer of my problem, i came here to finde one, since google doesnt give me an answer... ( or at least it seems like it).
I got the following problem: when i transfer cab files i.e. s2u2 on the omnia via vista explorer, theyre transfered properly. if i wanne install the cab file then, its not displayed anywhere in my phone. i rechecked a few times before i posted here.... nevertheless, i think this should be a minor problem and any1 of you guys will help me out.
regards
pope
Related
Ok I have been cooking my own rom, but i have got it good apart from you thing.
I get a Link for both Windows Live and Messenger (Window Live) in the Programs folder, but i can not find anything anywhere to get rid of these, are there hard coded somewhere? Or does someone know where i can get rid of this.
I have looked at all the initflashfiles files that i have in the kitchen but can only find a ref that i put in to a different folder which works!
hey guys, got a Kaiser and the wifi seems to play on it quite a bit. A search on this board pointed me to a Dell thread http://forum.xda-developers.com/showthread.php?t=330481 from where I could grab the WiFiService.cab which has the wzcsvc.dll .
Now how do I go about replacing the existing dll with this one ? I tried with Resco explorer 2007 but it didn't work. thanx for your help.
Firstly apologies for the noob question, I'm still very new to this WinMo stuff. And secondly I've searched about the forum all day but still having problems....
I've just got an HD2 and wanting to put some of the tweaks on it I've found via this site. When downloaded on my PC I'm faced with 4 or so files, two or three perhaps starting with a 'cab' file name and the other a reg or set up file. Basically what do I then do with these files? With the phone conected via USB I went into the deice memory and dropped all the files into the memory, did a soft reset, but nothing happened, no extra feature etc. Phone just started up as normal. Sorry for my 'thickness' lol. Would welcome any advice or a pointer to somewhere where it may be already written.
Thanks.
Do not unzip the .cab place on phone and browse phone with File Explorer, click on the .cab and install to Device....
It's a common noob mistake as .cab's are compressed archives so look like .zips on computer....
Thanks for the quick reply, I'll give that a go....
after dropping them on the device you have to run them. Open File Explorer and just launch them from there. A setup will be launched usually.
Thanks for the above advice, worked a treat.
Well I've had no problem putting cab files onto my HD2, however now I want to remove a few of them. Not sure how to remove the actual thing that I've changed??? I go into the device memory and I can delete the cab itself but the 'change' still remains, such as new task bar icons etc.
Any help appreciated....
settings -> add remove programs
just like on a computer
Oh yes of course, makes sense now. Many thanks
Hello together!
After installing TomTom on my HD2 the internal Bluetooth-function doesn´t work...as far as I know it is recommended to rename/delete the following files to fix this issue:
BTTrayCE.exe, BtSdkCE30.dll and BtCoreIf.dll
But in fact I can´t rename/delete any of these files...tried with windows explorer, TotalCommander and the HD2 Explorer (I don´t know if they are in use?! according to the task mangager they aren´t)
So could anybody please upload these 3 files from a working HD2 Device?
I renamed BtSdkCE30.dll and deleted BtCoreIf.dll.
For some reason BtSdkCE30.dll was in use, but I was able to rename it.
As far as I know you leave BTTrayCE.exe the way it is.
Done with Total Commander btw.
Maybe restart your HD2 if you can't even rename them, then try again before doing anything else.
Tomtom doesn't list the software as compatible with the HD2...
So i can imagine none of you did buy it and all use a not compatible cracked version. tttttttttttttttt
So now enjoy the dark side !!!!!!
brooon said:
Hello together!
After installing TomTom on my HD2 the internal Bluetooth-function doesn´t work...as far as I know it is recommended to rename/delete the following files to fix this issue:
BTTrayCE.exe, BtSdkCE30.dll and BtCoreIf.dll
But in fact I can´t rename/delete any of these files...tried with windows explorer, TotalCommander and the HD2 Explorer (I don´t know if they are in use?! according to the task mangager they aren´t)
So could anybody please upload these 3 files from a working HD2 Device?
Click to expand...
Click to collapse
this works with almost any problem situation with tomtom...
preferable, install to memorycard on another device, then run tomtom from card without installing it, cause you put all the files on memorycard already... yes i did buy it for my touch pro...
If you are installing with a cab file,
Install in your storage card and hard reset.
Now, don't install again.Copy tomtomnavigator.exe from program folder in storage card and place a shorcut in windows programs folder.
blue8300 said:
Tomtom doesn't list the software as compatible with the HD2...
So i can imagine none of you did buy it and all use a not compatible cracked version. tttttttttttttttt
So now enjoy the dark side !!!!!!
Click to expand...
Click to collapse
It's working well on my HD2 without issues.
Hey there!! First, thank you for your answers!
Well, i really don´t want to make a hard reset!! TomTom itself runs very well on the device (and it runs on my device too), my only problem is that the bluetooth will not work as long as these three files have not been deleted or rather been exchanged with the untouched files .
Let me explain that: If files have been deleted, the HD2 will restore them from the rom automaticly after a reboot and everything is fine. Most people who had to handle with the same problem (TomTom vs. Bluetooth) had success with this method, but a few devices deny the access on these files, so they can´t be deleted or renamed. So is mine.
And for this reason I asked for the original files from a working rom! It would make it possible for me to replace my corrupt files...
Has anybody of you guys a few minutes of time an wants to upload the three files please?
It would really make my day!!
brooon said:
Let me explain that: If files have been deleted, the HD2 will restore them from the rom automaticly after a reboot and everything is fine. Most people who had to handle with the same problem (TomTom vs. Bluetooth) had success with this method, but a few devices deny the access on these files, so they can´t be deleted or renamed. So is mine.
Click to expand...
Click to collapse
If device deny access to files, they cannot be renamed or deleted, you cannot replace them with other files too... (do you tried Resco Explorer?)
I have made a personalized cab of TomTom Navigator which doesn't install the bluetooth-specific files. If needed I can upload it somewhere and give you the link via PM
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
xardus said:
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
Click to expand...
Click to collapse
In TT tap to GPS signal bar and next tap on button with version number
Petulinek said:
In TT tap to GPS signal bar and next tap on button with version number
Click to expand...
Click to collapse
i know that...but without a map activated i cant see that screen...it only says "ur map isnt activated" and only button i have is for download a voucher....i try with an older version but i cant find tomtom 5 on the web
xardus said:
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
Click to expand...
Click to collapse
You mean the device ID?
You can open the ttnavigator.bif with notepad in your PC for the device details.
How I fixed the problem
I had the same problem, so I deleted the three files with resco. Two of the files will "appear" not to be deleted because they are ROM files. The important thing is that you need to have a shortcut to BTTrayCE.exe in \Windows\Startup.
Thanks for the posts!
As I said, it´s not possible to delete the files in my case...thats why i want some original files to exchange them.
...Is nobody out there how wants to upload these three little files for me? ...
I had this, All I did was launch TC, goto \windows do a select bt* delete all files, and it fails to delete most of them, but soon as I did that BT came back to life....
I can't help with the missing files as my device has still to arrive but I read that installing version 7.915.9196 VGA from HTC Iolite works without the bluetooth problem.
hey guys i could really use that bluetooth file.. i sorta messed it up too with the tom tom...
Hey Londontownguy:
Thanks for your suggestion! But as i said above, i really don´t want to hard reset. And the 7.915.9196 VGA from HTC Iolite doesn´t contain the "healthy" files, so an installation without hardreset doesn´t fix the problem.
Now we are two people including phatjesus81...andagain:
...Is nobody out there how wants to upload these three little files?...
myeah..
i cant start my bluetooth anymore because last week after installing tomtom7 i got the error and baleeted BTTrayCE.exe somewhere , even though it is in my \windows\ folder together with the btcore and btsdkce50 dlls.. cant remove those..
so BBTrayCE.exe is in my windows folder right now , and bluetooth wont start.. does that have anything to do with the other two dll's still being there or am i a booboo?
i mean, i totally removed ttn..
so now i'm totally stuck..
HI can anyone help. i am new to the windows mobile but i love it. i can't seem find how to change the registry key, i was tld i need an editor or use the cab file. the cab file show ur as (.xlm). By the way i have a htc Leo, ( i think T-mobile much have taken the control panel away) plus i cant update the rom.
aa241369 said:
HI can anyone help. i am new to the windows mobile but i love it. i can't seem find how to change the registry key, i was tld i need an editor or use the cab file. the cab file show ur as (.xlm). By the way i have a htc Leo, ( i think T-mobile much have taken the control panel away) plus i cant update the rom.
Click to expand...
Click to collapse
You will have to specify which registry key etc. you want to change (otherwise we cannot give you the appropriate instructions or .cab to do so..)
If you want to upgrade a T-Mobile HTC HD2, (to official or cooked rom) you will have to use HSPL.
Grtz,
Degake
hey. thanks for the reply. i have seen some cab file i would like to add to my phone but when i transfer it, it shows up as xlm file, which does not install on the phone. how do i go about installing it.
aa241369 said:
hey. thanks for the reply. i have seen some cab file i would like to add to my phone but when i transfer it, it shows up as xlm file, which does not install on the phone. how do i go about installing it.
Click to expand...
Click to collapse
you do not extract the cab files, the cab you copy to phone and execute them from there.
thanks dude, it's that simple i dont know why i was thinking it was a complicated process, i have now mastered the cab file. one quick question how do i uninstall file that have been installed on the phone. deleting the file doesnt seem to work. any advice??
aa241369 said:
thanks dude, it's that simple i dont know why i was thinking it was a complicated process, i have now mastered the cab file. one quick question how do i uninstall file that have been installed on the phone. deleting the file doesnt seem to work. any advice??
Click to expand...
Click to collapse
Simple:
Startmenu => Settings => Application => Remove programs ~ Select your app. and press remove
Regards
thanks dude. i found it after 3hrs. but i already did damage. i delete the file without uninstallling it. so i now stuck with the icon on my but i think i cn gey rid of it. thanks
full screen
Does anyone know how are make a program full screen. i have just installed audio manager on the leo but it only shows it on the top left of the screen, it works but not in full screen.
aa241369 said:
Does anyone know how are make a program full screen. i have just installed audio manager on the leo but it only shows it on the top left of the screen, it works but not in full screen.
Click to expand...
Click to collapse
Hey there. Welcome to the WM
about the question you asked about the program named "audio manager",
for me it looks like a resolution issue that the specific programme is designed for a VGA resolution screen (square screen) which might not be compatable for the Leo's WVGA screen (wider screen).
All you need to do is get a VGA fix or simplily wait for the devs to release a WVGA version of the app.
Link:
http://forum.xda-developers.com/showthread.php?t=442426
(not sure if it works, just an example of what you'll be needing)
good luck!
cheers
CN23
cheers dude. im gona see if it works... i thut as much that the audio was the problem. but the audio manager affects my sms. i dnt know why... when i uninstall the audio manager my txt message started showing again. any ideas what happened
hi can anyone, advice me, my hd2 doesnt use the wifi wen im at home because i have unlimited internet on my phone. i have been told wifi works quicker for internet surfing, im already connected to my home network but the phone doesnt use it. how do i get the phone to use the wi-fi instead of the t-mobile internet