i just got my phone today and i cant hardspl it yet. i tried that the prof. sadi and all i got was a white screen, and then i went to his other forum and dl the 3 files flashed tried to flash those and all i got was a white screen again, ALL I GET IS THE WHITE SCREEN. PLEASE HELP, p.s. im not a noob, i have had a 8525 for like a year and ahalf and never had this problem. someone please help
You've already posted in the "HardSPL will not install - WHITE SCREEN" thread (this one), so there's no point continuing this thread....
If you read through the whole of the above thread, then you should be able to work out if there has been a fix or workaround posted for your particular issue; if not, post some more relevant info so that people can help - "PLEASE HELP!!!" is just gonna get you ignored
MODS: Please close this thread
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
More detail please...
Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II
well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%
its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?
it says just usb and v1.0
it tries to flash and then stucks at 7%
new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N
please help!!
Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT
Did you try a google search? I found this related to error 112...
Thanx, trying possible Fix!!
aahh it doesnt work... please can anyone help more??
tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???
can i get some help? please =(
i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?
Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.
close this thread plz
OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.
Just been trying to unlock my tytn II from orange by using the Kaiser sim-unlocker, i follow the directions to the word but even in step 1 I run into this error message 'Error [262]: update error' on my pc and I am forced to end the process before I leave 0% of task.
I've tried the process a few times, but only resulting in the same conclusion. This is my first post, I have looked to see if anyone has had this problem. Sorry if this is not the correct thread or people have answered this already. Just a little frustrated in not getting anyway,
thank you.
peteelite said:
Just been trying to unlock my tytn II from orange by using the Kaiser sim-unlocker, i follow the directions to the word but even in step 1 I run into this error message 'Error [262]: update error' on my pc and I am forced to end the process before I leave 0% of task.
I've tried the process a few times, but only resulting in the same conclusion. This is my first post, I have looked to see if anyone has had this problem. Sorry if this is not the correct thread or people have answered this already. Just a little frustrated in not getting anyway,
thank you.
Click to expand...
Click to collapse
No matter how frustrated you are, ALWAYS SEARCH!!!!!!!!! There are numerous other threads about this same error. Do yourself and everyone else a favor and do a search before starting a new thread.
Here is your one time, free link to the search page.........
http://www.google.com/search?hl=en&...e:http://forum.xda-developers.com&btnG=Search
BTW, welcome.
Error
I got this message.. It worked after a few tries.. Not saying that any of these were the reason but here are a few things I did..
Turned off virus protection.. Unplugged all other USB devices.. Rebooted the PC..
Good luck
please i want to unlcok my cid to install windows 6 how????????????????????????
every time it gave me error 294 invalid vendor id and now i want to know how to fix this
uppppppppppppppppppppppppppp
READ!!!
All the answers are in this forum my friend. Do you honestly think you're the first person to have an issue flashing a ROM? Start at the top and read. You'll find the answer somewhere. If I knew how to do it off the top of my head I'd tell you myself, but I don't, so I'd have to read the forum to find out myself so I could tell you!!
dont be lazy bro! search & find!
Step by step: http://forum.xda-developers.com/showthread.php?t=324557
Hi,
Trying to Flash Hard SPL 3.56 to my T-mobile based tytn II. Everytime i go through the process (using Jump SPL) it fails at 0% with Error [262] Update Error.
Can anyone give me any pointers on where i might be going wrong? I am using Windows XP (first tried with a Vista laptop which had the same problem despite downgrading drivers to try to resolve).
As far as I can tell i've been following the guide properly.....
Thanks very much
Jason
Do you have .net installed in your machine?
jasonfrancis170 said:
Hi,
Trying to Flash Hard SPL 3.56 to my T-mobile based tytn II. Everytime i go through the process (using Jump SPL) it fails at 0% with Error [262] Update Error.
Can anyone give me any pointers on where i might be going wrong? I am using Windows XP (first tried with a Vista laptop which had the same problem despite downgrading drivers to try to resolve).
As far as I can tell i've been following the guide properly.....
Thanks very much
Jason
Click to expand...
Click to collapse
ask your question here http://forum.xda-developers.com/showthread.php?t=433835 and please don't start new threads
msd24200 said:
ask your question here http://forum.xda-developers.com/showthread.php?t=433835 and please don't start new threads
Click to expand...
Click to collapse
You read my head.......
Held back from posting earlier as didn't to be the first post of doom...
Mods please close.
Over/Under on posts before lock! 8
Apologies
Sorry about that everyone! I'll post in the right place now.
Jason