Given the number of people in the forum that are reporting Hardware issues with the USB port and find themselves wanting to return to the shipped SPL and stock ROM for warranty returns - Is there anyone out there that can offer a fighting chance to jumpsoft spl and flash from SD card to the original spl? Is it true to say that it is possible to do using the supplied instructions but rather than use KaiserCustomRuu you rename the SPL to kaisimg.nbh - copy to the SD card and cross everthing you got while you flash from SD card? - anybody succeeded?
Related
I broke my ppc6700 usb port so now I can sync or flash the rom back to the original rom. Does anybody know how to flash the rom using the miniSD card. It is possible with other HTC devices but is there a specific instruction for the Apache?
Thanks in advance.
Here you go:
[edit] Wrong link, and now I can't find the right one.....sorry. I'll keep looking.
Paragon: Maybe you can try looking in your browser history?
I have the same problem a friend gave me a phone but the usb was busted off and ive tryed to fix it back on the 4 ground plates and the 5 pins are all connected but it still doesent work. So I'm wondering if i can get this phone to boot off the mini sd card i can get it into boot mode where is says serial and v2.02 but nothing past that. I have formated my 512mb mini sd card fat32 and put the file "nk.nbf" on the root of it, still no luck.
bruce303lee said:
I have the same problem a friend gave me a phone but the usb was busted off and ive tryed to fix it back on the 4 ground plates and the 5 pins are all connected but it still doesent work. So I'm wondering if i can get this phone to boot off the mini sd card i can get it into boot mode where is says serial and v2.02 but nothing past that. I have formated my 512mb mini sd card fat32 and put the file "nk.nbf" on the root of it, still no luck.
Click to expand...
Click to collapse
ihave a similar problem please pm if you find the solution
Following five steps are what I did to flash my HTC Apache ROM:
[*]Insert the MiniSD card which has the HTC Apache ROM in it.
[*]Hardware-reset HTC Apache
[*]Press the power button again
[*]Remove the MiniSD card
[*]Software-reset THC Apache
[*]Done
The ROM in my MiniSD card is a backup of the HTC Apache ROM identified as 02/07/20 on 02/24/06. I archived it using the mtty d2s command.
Tommy
What was the file name you used on teh sdcard
Hi Tommy
Can u send me the same file u backed up on the sd card i wud like to flash my device with it.
tommyclee said:
Following five steps are what I did to flash my HTC Apache ROM:
[*]Insert the MiniSD card which has the HTC Apache ROM in it.
[*]Hardware-reset HTC Apache
[*]Press the power button again
[*]Remove the MiniSD card
[*]Software-reset THC Apache
[*]Done
The ROM in my MiniSD card is a backup of the HTC Apache ROM identified as 02/07/20 on 02/24/06. I archived it using the mtty d2s command.
Tommy
Click to expand...
Click to collapse
is this possible????
is this possible... anyone have detailed instructions? i wanna load a custom ROM using this method... Please PM... take care and thanx
Wrong post section
Sorry,
I was Upgrade my Imate-jam with Rom 2.03 TX WWE
But There are lot of bugs in this rom
so now i want to down grade my jam to its previous state but when i enter in bootloader mode Screen shows that
Serial
V 1.00
I plug my usb cable to jam but Serial didnot convert in USB some one told me to downgrade the rom through SD Card
I have 1 GB Kingston mini SD card but now what i have to do now nobody help out me to this trouble i tries lot of searches but invain.
Now i am getting in trouble with my jam kindly some body guide me whole process with files support because i have no files regarding Rom upgrading/Downgrading through SD Card
Thanks a lot..
Hassam Moin
[email protected]
[email protected]
Hi all
Sorry for my poor English
I have tried three to four WM6.1 Rom on my HTC TYTNII, whenever an application try to read the storage card, it hangs, but any other application installed on device working fine,
also tried to exchange the SD card with my friends TYTNII,
both my and his card working on his device
both my and his card hangs on my device
however, if I flash a WM6.0 Rom, this issue doesn't exist, did anyone meet this or only me ???
BTW,
the card is a SanDisk 8G
3.29.707.0 WWE
05/07/08
1.65.16.25
25.83.40.02H
KAIS130
SPL-3.28.Hard
CPLD-8
Hope we may have a solution on the above, Thanks for any reply.
the apps that are freezing, are they installed on device and reading files on storage card orr installed to storage card and the shortcut is on device? if the apps are installed to the storage card they will sometimes run slow, try uninstalling them and reinstalling to the device. also you might check your running programs in the task manager. running programs will obviously eat RAM and thus the device will run slower
i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...
rookery said:
i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...
Click to expand...
Click to collapse
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph
variosteph said:
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph
Click to expand...
Click to collapse
Thanks for your information, but I had flashed "Dutty's", "TNT Series" and HTC official, same problem happened a few days after the flash, i assume it may not cause by download problem....
are there any way to verify a flash result ????
Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me
rookery said:
Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me
Click to expand...
Click to collapse
1. Try removing the SD card and SIM while flashing the new ROM.
2. Try formatting the SD card in FAT32 again.
Clean your card slot in the phone its dirty thats all .
Tried removing the SD card and SIM while flashing the new ROM
Tried formatting the SD card in FAT32 again.
problem still reamin,
however, once reflash back to Windows Mobile 6.0, SD card works reflash 6.1 SD hang.....any idea?
I've seen a similar symptom to this if I try to change my Internet cache to write to the storage card.
Both the OEM AT&T Tilt 6.1 firmware and a couple of the flashes from here - same thing.
Now here's the cute part - I also have a 2GB NON-SDHC card and so far, with THAT card, it hasn't happened.
This looks like some kind of registry problem in these ROMs, and it also appears to be in the base code and across a number of different loads.
It scrambled the hell out of the formatting on my 4GB card when it happened the first time. The second time I SAW a scrambled directory in Total Commander, but a checkdisk on my PC (it has a reader that can read the SDHC cards native) came back clean.
There's something funny going on with these loads somewhere.
Never mind - it just blew up the same way on the non-HC card. Same deal.
I have updated my spl from Oli 1.x to 3.56 and now i am unable to view my files on my storage card.
Can anyone help?
hey just guessing here, cause not really sure, but did you flash while your sd card was in?? May have killed it. Also have you tried another sd card to see if this was the case
...also try putting your card into a usb card reader. Though I bet the spl change to 3.56 may have corrupted some/all files. (if you left your sd card in the slot as gustok guesses)
when i flashed the spl i took both the storage card and sim card out. I can still see on my 8gig card that 1.6gig is taken up but unable to view.
I tried putting it into a usb reader and still wasn't able to view nada. Is there anyway at all to get the files back. This is really important, going through divorce and took some really important pics and need to get them.
I have been using Hard SPL 3.29 with my tilt and have not had a problem with SD card. You may want to try using SPL 3.29 instead as I have read that 3.29 seems to be the most stable.
am i able to flash back to oliPof 1.x and see if that makes a difference. Didn't know if you could go from a SPL 3.x to a 1.x.
Thanks
PS - tried going to SPL 3.29 and didn't work.
unc-newbie said:
am i able to flash back to oliPof 1.x and see if that makes a difference. Didn't know if you could go from a SPL 3.x to a 1.x.
Thanks
PS - tried going to SPL 3.29 and didn't work.
Click to expand...
Click to collapse
You can go back down to 1.0, but I don't think it will help, sounds like the Card has been damaged or become corrupted. If a Card Reader can't see them I don't think you have much chance.
If the files are that Important, I'd start looking at data recovery methods.
Ta
Dave
DaveShaw said:
You can go back down to 1.0, but I don't think it will help, sounds like the Card has been damaged or become corrupted. If a Card Reader can't see them I don't think you have much chance.
If the files are that Important, I'd start looking at data recovery methods.
Ta
Dave
Click to expand...
Click to collapse
gotta agree here, if you can't see them on a card reader because it doesn't use any type of an spl on those. you're kinda sol other than the effects of a data recovery system....which usually ruins the card anyway. sorry
Hi guys,
I already try to flash via SD Card, but the bootloader just skip my file in SD Card. (I already format the SD card using FAT32, copy the windows 6.5 to SD card, and then running bootloader)
Nothing happen, since I can't using CheetahUnlocker (no activesync connection).
Thanks
Try an official ROM, sounds like you don't have an unlocked SPL. Then go through the unlock procedure again using cheetaunlocker and athena unlocker.
http://forum.xda-developers.com/showthread.php?t=511763
where can i found original ROM ?? I tried the AT&T with same error..
Thanks