Database Info

German T-Mobile Upgrade fails with Error 120 Country ID

Hi,
I searched this forum, but I couldn't find a solution for my update problem. I tried several times to update my German MDAc with this file:
http://www.t-mobile.de/downloads/mda_i-iii_compact/ma_tmde_10601_130_10500_ship.exe
The problem is I get always the Country ID error 120. I tried the MaUpgradeUt_noID.exe and the cracked one. With this programs I just get a different error message/number. I tried also various other things: I did the [CHECKCEID_TYPE]=1 modification to RUU.conf, I disabled McAfee, I did a hard reset first etc.
Does anybody have a clue what I'm doing wrong?
Please help
Andreas
PS: this has been copied from the General forum. Sorry.

Hi,
I got this error as well, just make sure your USB connection is enabled in ActiveSync and then run MaUpgradeUt_noID.exe. When you get the error about the country code simply close the program and re-run MaUpgradeUt_noID.exe and this time round you should'nt get the error.
Worked for me
Thanks
Msuk

Hi Msuk,
that's what I've done! But the second time I get a different error. Sorry I can't remember it exactly, but I think it was something like wrong device or so. If this is important to solve the case, I will re-run it and post the message.
Andreas

Please help!!

i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please

More detail please...

Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II

well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%

its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too

Theres a way to Flash the rom via SD card on the universa?? please help TT-TT

Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?

it says just usb and v1.0
it tries to flash and then stucks at 7%

new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N

please help!!

Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT

Did you try a google search? I found this related to error 112...

Thanx, trying possible Fix!!

aahh it doesnt work... please can anyone help more??

tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???

can i get some help? please =(

i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?

Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.

close this thread plz

OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.

need some help...

hey guys im trying to redo the rom on my tmobile mda... everytime i try to do it it starts and before it even gets to 1% complete it gives me an error message. any ideas?. error 260 is the code.

hi...u should check over in the Hermes forum...
see this thread/post for u'r error:
http://forum.xda-developers.com/showthread.php?t=368624&highlight=error+260
regards

thanks man i figured it out... vista was the problem... it worked fine on my xp computer.

Please post in the correct forum and please use a descriptive title for your post. We have a hundred threads titled "please help".

I've tried, searched, think I'm just stupid.

As the title says, I seriously think I am just being stupid. But I have just spent the last 5 hours searching, trying, and just about anything I can. But I can't seem to get anything to work.
Now on to my situation:
I just got a new Tilt, it is not my first. My first one was when it first came out for AT&T. So it was still the WM6Pro and I SIM CID and HardSPL'd it. So I do know how to do this stuff. Just now with this new one, it must be a newer one, because it came with WM6.1 on it.
Here is what I know I have on it. Bootloader shows this.
KAIS1*0
SPL-3.56.0000
CPLD-8
And this is when the AT&T logo pops up.
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Now the first thing I am trying to do is HardSPL it.
I swear I have tried everything.
First thing I tried was the simple, Kaiser SIM/CID Unlocker & Changer , I start with the Flash-HardSPL and get to the Bootloader saying USB with the Rom updater showing the status bar. Then with the phone still in bootloader, I get Error [260] : Connection, The Update Utility cannot connect to your PDA. and so on.
So I exit that. Go on to the next try.HardSPL v3.07-3.56
All of them end up as the same result as the first. But I will explain what V3.28 as I have heard and read that that is one of the best ones to use.
Get to bootloader, Computer monitor shows status bar, and phone shows status bar. And I wait for it to do anything and then maybe a minute or two it gives me an error. Error [262] : Update Error, The ROM Update Utility has encountered communication errors during the update process. and so on for recovery.
I've also tried to do the HTC Kaiser Hard-SPLv1 - CID Unlock & Flash any ROM to your device (4 free)
When I start this one up it gets me to my screen being completely white. and I can not continue after that without taking the battery out and starting the phone again.
I have also tried other things that I just cant remember right now, cause I have been trying to do this for so many hours, and downloaded so many different things. So if you can and may help me, anything and everything will be appreciated beyond the gratitude I can give. Once again, I do know what I am doing, but I do not know what I am doing ARGHHH! lol.

I think you need JumpSPL1.56-KAIS, then hardspl , Im assuming this because you didnt say you did this step in your post.
Read post #2 here http://forum.xda-developers.com/showthread.php?t=396922

pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236

sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236
Click to expand...
Click to collapse
I tried that one, and for 2nd poster, I did try that also. Sorry for not listing. But I still appreciate the help guys.
I was also thinking I had to go back to 6.0 but I went 55 pages back on this section of the forum, and I still cant find it. I'm still looking, but it seems like a dead end to me. =/

there was a guy having this issue a while back, look in the white screen thread towards the end! I will see what I can find for you!

Right now I found a 6.0 ATT rom, so I got that to work, now I will try unlocking it, thank you guys, and thanks to this post (70+ pages back!) http://forum.xda-developers.com/showthread.php?t=326933
Edit 1 :
Alright I got it back down to 6.0, but yet I still cant do anything with HardSPL, CID, or Security. If anyone has any solutions I will listen! Even if its bashing my head against anything! LOL! Sucks!

downgrade I don't believe is necessary
sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236[/quote
Nope, I didn't have to. My tilt came with 6.1. I had some problems, ended up switching to an XP laptop, was using Vista(prem. sp-whatever). It's too late here, but maybe tomorrow I can figure out what I did, but I think the main thing was using a windows XP pro machine - don't know if it needed to be pro, but that's what I had. Thereafter I've used the vista machine without problem. Good luck.
Click to expand...
Click to collapse

Meh, you need to use JumpSPL first. I've had this happen before, and JumpSPL cleared it right up for me.
I think Jocky has a few you can use. Check his HardSPL thread.

I first tried to use Vista, but then went back to my xp machine.
Edit :
I've tried to the JumpSPL but had major brain damage last night. trying it again with a fresh day. Will let you know.
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!

Yeah, well I can NEVER find anything via search here. Hell, to prove that point, I just typed "stupid" in the subject search line and found: NOTHING!!! I don't know what the deal is, but I've just pretty much given up searching this site.
Which leads to more reading than I'd typically care to do.
J

Munchys said:
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!
Click to expand...
Click to collapse
Glad to hear you got it fixed.

Awesome, fully got it unlocked and everything! Thanks for telling me what I might have missed and messed up on!

At&t problem with upgrade

Hi folks, i have the At&t brand of the tytn2 and have this problem:
When I try to flash with a new rom it always ends the same: it starts installing I get the white screen with the 0% bar on it, wait a minute or two and then the 262 error: Update error,the rom update utility has encountered communucation errors during the update proccess, and when I follow the steps but I end on the same error!
could you help me somehow?
i tried 3 different roms and it is the same situation!
Thanks in advance

burlakdj said:
Hi folks, i have the At&t brand of the tytn2 and have this problem:
When I try to flash with a new rom it always ends the same: it starts installing I get the white screen with the 0% bar on it, wait a minute or two and then the 262 error: Update error,the rom update utility has encountered communucation errors during the update proccess, and when I follow the steps but I end on the same error!
could you help me somehow?
i tried 3 different roms and it is the same situation!
Thanks in advance
Click to expand...
Click to collapse
Is your phone unlocked? Read the thread below, follow each step exactly, have fun and good luck.
http://forum.xda-developers.com/showthread.php?t=433835

ya man thank you everything is good now i upgrade now my rom thnak you soo much

Please read the sticky before posting a thread.
Question answered locking.