Related
Hi,
HTC touch HD and other recent HTC phones have a very nice dialpad that's much better than standard WM6.x one.
Is there a way to install just that dialpad without everything else from M2D? I'm looking everywhere for it, but all I can find is ROMs that include it, but not a separate application.
Thanks
P.S. my phone is QVGA E-Ten x600
Phone Canvas
Hi dmesg
I think you're talking about HTC Phone Canvas. Here are some links to start you in the right direction:
http://forum.xda-developers.com/showthread.php?t=478600
http://forum.xda-developers.com/showthread.php?t=493593
http://forum.xda-developers.com/showthread.php?t=431762
http://forum.xda-developers.com/showthread.php?t=474302
http://forum.xda-developers.com/showthread.php?t=459748
http://forum.xda-developers.com/showthread.php?t=441883
http://forum.xda-developers.com/showthread.php?t=425694
Two words of advice:
1) Make sure you install the version that is compatible with your device
2) Back up your current configuration anyway!
Cheers
andrew-in-woking
Andrew,
That's exactly what I was looking for, just didn't know the correct name
Thanks a lot!
Hello everyone
I have two problems when cooking rom.
1. I have added this registry to add Call Recording option in WM Dialer
;in call recording support for stock dialer
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"VocRecPath"=dword:00000002
[HKEY_LOCAL_MACHINE\Software\HTC\AUDIOGAIN]
"AUDIO_DEBUG_FLAG"=dword:00000040
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"RingingAddressId"=dword:00000000
and i have new option, but it does not work, no new files in My Documents\Notes, so my question is what is wrong
2. What is responsibe for enabling/activating vibrations in new HTC EZInput2
? maybe biotouch.exe ?
so how exacly make it work
Thanks in advance
Billy
EDIT: This thread is old - DIALER is not working with 6.5 ROMS so I removed it. Stay tuned, I'll provide other solution soon.
Thanks a lot for the Rhodium dialer!
Is there a way to add Greek letters on the keys, just like Panosha's Grey Dialer Topaz/HD? I would be grateful if you did!
Thank you so much! (added in the rollup thread)
I do have a little issue here,
I have editted Manila to enable landscape mode, And I cannot get the dialer in landscape,
If I start the dialer from Manila in landscape, The dialer starts in landscape & switches to portrait mode in a few seconds, Any advice?
jeutie said:
Thank you so much! (added in the rollup thread)
I do have a little issue here,
I have editted Manila to enable landscape mode, And I cannot get the dialer in landscape,
If I start the dialer from Manila in landscape, The dialer starts in landscape & switches to portrait mode in a few seconds, Any advice?
Click to expand...
Click to collapse
Try to use GConfig http://forum.xda-developers.com/showthread.php?t=487991 to add dialer as allowed application.
Kinda lame to ask, but can't I do that via a registry edit?
I try to avoid installing even MORE applications on my topaz
First thanks for sharing this!
I've installed it to my German TD2 (HTC Rom). There's one annoying issue: each time my phone disconnects from my car kit there's a message coming up which tells me that I now do have to hold my phone close to my ear (something like that). This message has to be confirmed. I had the same issue with another version of the Rhodium dialer.
Is there a chance to resolve that annoying message?
This looks great, thanks a lot.
Just to let you know, it seems to work fine with WM6.5, doesn't seem to have any problems or conflicts (so far ).
Thanks again
Peace
jcan said:
Is there a way to add Greek letters on the keys, just like Panosha's Grey Dialer Topaz/HD? I would be grateful if you did!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=4370643&postcount=1286
Not sure what planet I was on when I wrote my first reply, or maybe I changed my rom, but I can't seem to get this working on 6.5 custom rom ...
Hi qbus00,
Thanks a lot for the dialer, in general it works great.
Also Manila works now great in landscape.
After installing the Rhodium dialler I've notices the following (unwanted) changes in addition:
1) that on the phone settings tap "advanced" this one tap is now english instead of german.
Q: Can this be switched to german again?
2)The "curtain" that is above the buttons while a call is not there any more.
Q: Is there any way to enable this curtain again?
3) Since I installed this dialer, i always get a notice when I'm disconnecting from my hands free system that I now need to put the mobile to my ear again.
Q: Can this be switched of/disabled ?
Would appriciate your response, maybe some of these effects can be corrected by registry or file exchange???
Thanks
GeScha
GeScha said:
Hi qbus00,
Thanks a lot for the dialer, in general it works great.
Also Manila works now great in landscape.
After installing the Rhodium dialler I've notices the following (unwanted) changes in addition:
1) that on the phone settings tap "advanced" this one tap is now english instead of german.
Q: Can this be switched to german again?
2)The "curtain" that is above the buttons while a call is not there any more.
Q: Is there any way to enable this curtain again?
3) Since I installed this dialer, i always get a notice when I'm disconnecting from my hands free system that I now need to put the mobile to my ear again.
Q: Can this be switched of/disabled ?
Would appriciate your response, maybe some of these effects can be corrected by registry or file exchange???
Click to expand...
Click to collapse
1. This is stripped from WWE ROM and becouse of that texts are in English.
2. Not possible - Rhodium dialer has no curtain
3. This is also Rhodium's feature impossible to disable
Thanks a lot for feedback...I guess I'll live with the Rhodium version.
Also thanks for posting this dialler, it works GREAT!!!!
Hi !
... to looking this : http://forum.xda-developers.com/showthread.php?t=524797
Hi qbus00,
Thanks a lot for the Rhodium dialer!
Does this dialer support other languages, like the celeDialer, for example French, there an external mapping table for your French Name:
a àâä
e éèêê
video call support..?
qbus00 said:
2. Not possible - Rhodium dialer has no curtain
Click to expand...
Click to collapse
@qbus00
Could you be so nice and tell me how i only get rid of the dialer curtain with a regedit?
Or is there a way to remove eveything except for the dialer curtain from this .cab?
I have been searching for a solution, but couldn't find anything. Please help, thank you.
qbus00 said:
Hello!
I was looking for way to have support for landscape dialer. When searching I found this thread: http://forum.xda-developers.com/showthread.php?t=521815.
It contains link to Black Rhodium Dialer cab.
But there are three things which are annoying me with this cab:
1. It has black buttons
2. After installation it replaces taskbar icons
3. Becouse of point 2 you need to install sdkcerts before installing it
I decided to modify this dialer to restore original behaviour and remove taskbar icons.
You can download it from here: http://rapidshare.com/files/254987381/Rhodium_Phone_Dialer.cab
I tested it on TESS ROM (based on Windows Mobile 6.1) so please let me know if it's usable on 6.5 .
And last but not least: DO BACKUP BEFORE INSTALLING THIS CAB (using SPB Backup for example).
Click to expand...
Click to collapse
phcanOverbmp.dll controls the Taskbar icons but I don't see it in the cab file anywhere.
Hi,
I used this dialer on StockROM, as I need landscape support for the Dialer and it basically worked great. Video & ConfCall are supported, Landscape works great.
Unfortunately when I try to install this dialer on dutty's WM6.5 Leo R6 (or R1-R6, same on all). This dialer doesn't work, and The device falls back to Windows default dialer.
The Leo ROM doesn neither support Confcall, nor landscape mode, so I'm looking out for a dialer like this, that works on WM6.5 Leo ROMs.
Any suggestions?
You deleted the cab!
Hey qbus00. I was wondering if you might like to post the cab and the screenshots back up as I was just looking for this and have found that you've deleted it!!
I decided not to upgrade to 6.5 after reading a lot of negative reviews about it on this forum - others may have made the same decision. It would be nice it you could re-post the dialler for us old 6.1 stalwarts.
Many thanks.
left of centre said:
Hey qbus00. I was wondering if you might like to post the cab and the screenshots back up as I was just looking for this and have found that you've deleted it!!
I decided not to upgrade to 6.5 after reading a lot of negative reviews about it on this forum - others may have made the same decision. It would be nice it you could re-post the dialler for us old 6.1 stalwarts.
Many thanks.
Click to expand...
Click to collapse
Seek and ye shall find.
Hi!
From time to time on various ROMs threads someone is asking for other dialer then it was cooked into ROM.
Some of us likes the Topaz dialer without conference calls option but with curtain preventing key presses while talking and some of us prefer Rhodium dialer without curtain but with conference calls (they don't care about screen presses or they use some 3rd party tools to prevent this).
Because it's not possible to please us all by all chiefs we need to customize it by ourselves . For this purpose I've created three CABs: One for Topaz and two for Rhodium dialer (6.5 and 6.5.3 version).
Topaz dialer is available here:
http://rapidshare.com/files/300358400/Qbus_Topaz_Dialer.cab
...and Rhodium dialer is available here:
http://rapidshare.com/files/301083458/Qbus_Rhodium_Dialer.cab
...and Rhodium dialer for Windows 6.5.3 (fixed scrollbar bug) is available here:
http://rapidshare.com/files/340537139/Qbus_Rhodium_Dialer_for_653.cab
Please be aware that all of these CABs contain all files from original OEM so they override top icons (phcanOverbmp.dll).
All dialers are compatible only with OEM's up to 2.17!
Well... I would like one with conference calls and with curtain too! Is this possible on the Topaz?
Thx
Dont install these they are very very crap. Also u can no longer dial from contact. Had to hard reset.
Cheers !
BillyBoy said:
Well... I would like one with conference calls and with curtain too! Is this possible on the Topaz?
Thx
Click to expand...
Click to collapse
No it's unfortunatelly not possible.
PauloJ5 said:
Dont install these they are very very crap. Also u can no longer dial from contact. Had to hard reset.
Cheers !
Click to expand...
Click to collapse
You had made something wrong . They were tested by me in every detail before uploading them here (the ROM I used was TESS 3.8).
qbus00 said:
You had made something wrong . They were tested by me in every detail before uploading them here (the ROM I used was TESS 3.8).
Click to expand...
Click to collapse
OK so they dont work on Duttys R0 ROM.
I have a Topaz with a Topaz dialer. I don't like the curtain at all. I have tried the Rhodium dialer before. The problem with this dialer is that when you disconnect your bluetooth headset, it comes up with a silly message, something like "now you will have to put the phone to your ear to hear".... This is so annoying that I will stick with the Topaz one and live with the curtain....
Crappy dailer...
Its not working for me as well.... Im using Dutty Holy Grail R0.. Ive downloaded ur Rhodium dailer and just install the cab and restart.. then i check out the dailer..its not even close to rhodium dailer and nothin comes out on screen when im on the phone.. but the worst part is that ur cab cannot be uninstall and i hv to re-flash my topaz just cuz of that... i think u better check out ur cab first before publishing it...
Works perfect on UDK's ROM. But, does not work with Dutty's.
I didn't like the Rhodium dialer. I cook with the dialer from the Pure, Phone Canvas 4... much simplier so less screw ups.
65coupei6 said:
Works perfect on UDK's ROM. But, does not work with Dutty's.
Click to expand...
Click to collapse
What udK Rom did you try it on? Would like to use it on udK's Leo R5 [GER]
Thanks for feedback
Dear qbus00,
do you have any chance to provide this Rhodium dialer also in German?
Thanks!
GeScha said:
Dear qbus00,
do you have any chance to provide this Rhodium dialer also in German?
Thanks!
Click to expand...
Click to collapse
If I only get German OEM (or learn on how to disassembly HTC ROMs to get one).
Hi qbus00,
thanks, but I guess its not necessary ;-)
I installed your Rhodium Dialer on
udK Leo R5 WM6.5 - Build 21869.5.0.82 - Base v2.31 [GER]
and:
It works great!
- Supports VideoCall AND ConfCall
- Works in Landscape mode (if enabled)
- Has NO curtain in front of the buttons (what some don't like)
- I do NOT get this crazy message if headset is disconnected from bluetooth.
I don't know why german just works, and why this strange bluetooth message doesn't pop up any more...and honestly I don't care. My Topaz is now99,9% perfect!
Thanks again,
GeScha
PS: Conflicts with YouTube player: If YouTube (seperate) App is used, sound playback is not working as soon as first time tried for all youtube till next softreset.
YouTube via Opera works (also playback incl. audio) as long as YouTune App itself was not started.
PS2: One bug to report:
In Landscapemode the line above the dialer, where the currently typed numbers, the carrier (and if enabled the battery status) is shown, doesn't work.
Regarding the Display bug in landscape mode:
I guess it might only be the backgroundcolour setting from the display area of the dialer in landscape mode, that seems to be white (in landscape) instead of gray (as in portrait)
That might be the reason why the typing isn't seen in landscape.
Any idea where to change the colour of the display area of the dialer?
PS:
The YouTube "no sound" big seems also to be connected to this dialer.
When Rhodium dialler is installed, youtube app doesnt playback sound, after installing original Topaz dialer again, sound is also working again.
qbus:
Any idea which of the *.dll's that are installed with Rodhium dialler could cause this issue?
Could you maybe put together a package, where you do NOT update the dll's for Rhodium dialler or isn't it working with the newer dll's?
Thank you, my friend!
I am looking for them!
Some issues
First of all a big thank you for sharing this, I've been searching hard.
A couple of issues, Rhodium Dialer:
- on Energy ROM it does not fit correctly, and replaces some icons (sim, battery .... )
- It cannot be removed: I think making the CAB uninstallable would make it possible.
Anyway, let me say I appreciate much this work, and I'll keep looking at this.
Regards
Hi guys..
Can anyone upload this to someplace other than RapidShare? MegaUpload or something.. I can't seem to download from RS.
Thanks!
installation unsuccessful.
is there anything to disable before installing this..?
i always fail on installation. im using winmo 6.5 barebone.
GeScha said:
Hi qbus00,
thanks, but I guess its not necessary ;-)
I installed your Rhodium Dialer on
udK Leo R5 WM6.5 - Build 21869.5.0.82 - Base v2.31 [GER]
and:
It works great!
- Supports VideoCall AND ConfCall
Hi GeSha
Have you really tried videocall?
I tried it too and yes it supports videocall and concall but I really tried videocall with a motorola v9 and it failed.
I can call it but during the connection nothing hearn, nothing seen.
However v9 can't call hd2 because call is not permissed
Click to expand...
Click to collapse
I try meny Rom`s for my I600 but all of them somethink is not work or baterry go down quick.
Can you tell me 1 Fully working rom (6.5 or 6.1) With BT work.
Or if not have please tell me how to instal Titanium Panel ot original win 6 rom.
And link please
Thank again
the best i600 rom, titanium and bluetooth
Japany said:
Can you tell me 1 Fully working rom (6.5 or 6.1) With BT work.
Or if not have please tell me how to instal Titanium Panel ot original win 6 rom.
And link please
Click to expand...
Click to collapse
Here is the link kernel_23137,sys_23090_PsyClip-R to newew "light" build of shabudabu, i've changed the kernel of winmo to latest genuine - 23137
also i have added some cool stuff.
fully deleted branding like "smartphone" or "samsung" on the top of the screen
changed direct 3d driver to microsoft one - i gues it should increase 3d performance and battery reliability
titanium just like sliding panels will NOT work in WM6.0
i've already tryed few times - no way to do that
Bro its work great to the moment but I have one problem.... I can't use my tone for ringtones.when I put some sound in my documents in sounds I can't see the sound.... or when a use from explorer like ringtone show me that the maximun for ring is 300kb ,how I can use my sound for ringtone?
Sent from my LG-P500 using XDA Premium App
And somethink else.... when I go to messages and when pres NEW is not working,I can't write sms.....please help for thise 2 thinks.
Thanks alote!
Sent from my LG-P500 using XDA Premium App
oh, Thanks man !
It was my fault. didn't pay attention to key value ""FileSizeLimit"
now it's gonna be OK (have changed the value to dword:ffffffff)
ringtones also will work fine, just got a clean mxip_lang.vol
also i've compressed startup anim. images
it should run faster and smoother.
the last one problem is sms/mms.
Today gonna flash my device and see the result.
Only after i'll post a link to new (and fixed) build
Ok bro i will waiting for the working (ROM) link
i600
Yes, if the SMS bug would be fixed, this ROM would be great! How are you progressing with the issue?
Hi bro =]
Pls add to ROM regedit
Best regards
Hi Thorn !
There's no need to add regedit to ROM, 'cause i'll add TotalCommander and it's already has built-in reg editor
Great but i don't know how to import *.reg file in TC :/
I can't wait next relase
Best regards =]
Hello Everybody !
Please test this new build.
Changes:
1) Added Total Commander 2.53 B3, Polish language for TCMD
2) Try to fix messages problem. But still no result. Maybe after hard-reset.
I have added some rgu-s, maybe they where not applied during the first start
>>> Total Cmd, mesRGU <<<
MMS/SMS FIX:
1) HKCU\Software\Microsoft\Inbox\MsgTypes\IPM\Note\DLL emform.dll change to htmlnote.dll
2) HKCU\Sofware\Microsoft\Inbox\MsgTypes\IPM\SMStext\DLL mms.dll change to htmlnote.dll
HKCU\Sofware\Microsoft\Inbox\MsgTypes\IPM\MMS\DLL htmlnote.dll change to htmlnote.dll
Psyclip-R can you add italian language??? i want a new rom on my old "good" i600....but it have not sense without italian language...if you ca do this i will test yur rom...no problem to reflash my phone many times
MUI
Thanx a lot guys for sms/mms fix
Gonna add this fix to final build
lukas_ita, i'm sorry but i will not add italian to this ROM.
Rather it will be polish.
The last words about these build.
In a few weeks i'll stop building any build.
Well, maybe sometime will.. but not as often like now.
The main agrue is linux. i've switched to it. and i don't want to run win soft on any Wines etc.
Hmmm strange - i can't add picture to mms
also i can't open sms/mms settings
I can't make a videocall also
Keyboard Layout
Hi, I wanted to ask how to change the keyboard layout.
I have a german QWERTZ keyboard. I can activate German T9 but most of the symbols are not mapped correct, that's why I'm looking to change the mapping in the registry. I already found the path to some keyboard-related settings, but not the right values to insert for other languages.
Anyone got a clue how to perform this? Thanks!!
dachau said:
Hi, I wanted to ask how to change the keyboard layout.
I have a german QWERTZ keyboard. I can activate German T9 but most of the symbols are not mapped correct, that's why I'm looking to change the mapping in the registry. I already found the path to some keyboard-related settings, but not the right values to insert for other languages.
Anyone got a clue how to perform this? Thanks!!
Click to expand...
Click to collapse
solve change keyboard layout to your language , look this thread >> http://forum.xda-developers.com/showpost.php?p=2915942&postcount=1
Hey ! The latest news are:
-i'm still doing this
-i have improved settings menu performance.
-almost resolved messages problem
UPD /19.05.2011/ Here it is !TEST this build please !!
sms works well
bootscreen changed
settings menu performance improved
winmo ringtones Ring01-WindowsPhone.wma etc.
reupload
please reupload to mediafire or rapidshare....