Related
Hello guys
Please help! I've just got my Palm Treo 750v unlocked. The phone works fine on T-mobile but I can't get a GPRS connection. I've tried changing the settings and setting up a new t-mobile GPRS connection but i still can't get it connected.
I seem to have a wap contract connection (I presume this is preinstalled by Vodafone and must be Windows reg related) which always overides when i reboot the Palm.
If you can help I would be really grateful
Marcyb said:
Hello guys
Please help! I've just got my Palm Treo 750v unlocked. The phone works fine on T-mobile but I can't get a GPRS connection. I've tried changing the settings and setting up a new t-mobile GPRS connection but i still can't get it connected.
I seem to have a wap contract connection (I presume this is preinstalled by Vodafone and must be Windows reg related) which always overides when i reboot the Palm.
If you can help I would be really grateful
Click to expand...
Click to collapse
If you are in UK you are welcome to contact me tomorrow and i'll run through how to set it up. I've got an unlocked 750v running T-mobile and i've had no problems with GPRS or 3G.
Thanks Mike, I have sent you a private message. Looking forward to getting it working its driving me crazy.
Marc
Marcyb said:
Thanks Mike, I have sent you a private message. Looking forward to getting it working its driving me crazy.
Marc
Click to expand...
Click to collapse
Hi Marc
just replied by private message
regards
mike
Unlock 750
I have just purchased the 750 and would like to know how you guys unlocked it. Would love to use it with my T-mobile 2GB GPRS
l44wsn said:
I have just purchased the 750 and would like to know how you guys unlocked it. Would love to use it with my T-mobile 2GB GPRS
Click to expand...
Click to collapse
i used these guys -
http://www.imei-check.co.uk/
no problem at all
I've just got an unlocked Treo 750 and I am on T-mobile. My previous phone (Sony Ericsson k750i) worked fine on the web, but I've got no idea what settings to enter to get on the web on this phone! Can you help? PS I was thinking of trying Opera for browsing but I have not installed it yet.
hope this helps someone
good luck
http://www.filesaveas.com/gprs.html
Matt Christie said:
I've just got an unlocked Treo 750 and I am on T-mobile. My previous phone (Sony Ericsson k750i) worked fine on the web, but I've got no idea what settings to enter to get on the web on this phone! Can you help? PS I was thinking of trying Opera for browsing but I have not installed it yet.
Click to expand...
Click to collapse
1) go to start / settings / connections
2) if an existing connection exists click manage existing connections or add a new modem connection
3) if existing connection click edit or tap New
4) enter name - e.g. T-Mobile Inter.
5) select a modem - cellular line (GPRS, 3G)
6) access point name - general.t-mobile.uk
7) user name - t-mobile
8) password - one2one
9) click finish
you should be good to connect now
btw - you can always call t-mobile for support - they are really helpful
I tried this but after entering the name and modem the Treo asks 'Enter the number exactly as it should be dialed.'. What number do I put in here? I then tried using GPRS instead and I just get 'No modem at the above number.'.
Matt Christie said:
I tried this but after entering the name and modem the Treo asks 'Enter the number exactly as it should be dialed.'. What number do I put in here? I then tried using GPRS instead and I just get 'No modem at the above number.'.
Click to expand...
Click to collapse
If it is asking for a number, it sounds like you are setting up a WAP connection and not a GPRS connection.
Matt Christie said:
I tried this but after entering the name and modem the Treo asks 'Enter the number exactly as it should be dialed.'. What number do I put in here? I then tried using GPRS instead and I just get 'No modem at the above number.'.
Click to expand...
Click to collapse
call t-mobile - they'll help you set it up
i have a cab file that sets up all the tmobile settings for web and wap pm me if you want a copy it works a treat
chris
What are the proxy settings for Cingular Palm 750 with T-Mobile UK sim card?
I've unlocked my Cingular Palm Treo 750 and can make voice calls without any problem.
I still can't access the internet.
I've entered the settings and when I launch the browser, it first show 'locating' and then 'opening' in the status bar, but the web page never opens.
I know that with Cingular there were some proxy settings and so I wonder if I need to enter any here.
The proxy fields are:
1. This network connects to the internet
2. This network uses a proxy server to connect to the internet
3. Proxy Server (name)
4. Http:
5. WAP
6. Secure WAP
7. Socks
Hey all. I just wanted to give you a heads up. I started a thread on Hofo a day ago. There are actually two about this topic now.
Appearently Cingular had the wireless.cingular.com proxy set on IE. It's in the registry, not in the connection profile. The default connection profile is still wap.cingular without the proxy, but IE will use the proxy.
I assume they did this so that IE could access http://device.home/ the Media Net site, which you need the proxy to access. They did something else to make IE really work right with Media Net, so that's good, but you can't disable the proxy.
This has a few ramifications:
1) IE is slower due to the proxy.
2) The proxy may compress images.
3) You can't access the internet from IE using a Wifi card or if you change your access point to isp.cingular
I started deleting IE connection settings in the registry and managed to disable it. I screwed up the WAP settings in the process. So I have to isolate the registry setting(s) that are specific to this proxy.
It's something we should all do (disable the proxy.) You can still acess it by changing to the MediaNet connection profile should you want to later, but trust me you don't want the proxy set all of the time in IE.
Unfortunatley IE's settings don't have access to edit the proxy setting in IE, it's in the registry only. At least so far I haven't found a setting.
I'll keep you posted. My Treo 750 is appearently defective and I'm working on getting it swapped, so I'm going to be tied up with solving this for at least a day.
Here are two of the threads:
http://www.howardforums.com/showthread.php?p=8553147
http://www.howardforums.com/showthread.php?t=1085384
RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!
I isolated it. To disable the cingular proxy setting in IE:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings]
The default setting (that uses the proxy) is:
"EnableAutoDetect"=dword:00000000
Change it to:
"EnableAutoDetect"=dword:00000001
Or simply delete it. It's more of the fact that if it's there and =0 it's used. if it's missing it's not used. But changing it to =1 will also make it disable. This way you can simply change the value back without re-adding the seting back in.
Full details are in my post here:
http://www.howardforums.com/showthread.php?p=8555248#post8555248
I will attempt to .cab an .xml file that will allow you to import the change without a registry editor.
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I'm really not sure at this point.
I finally got this registry edit (or "Hack" if you prefer) in to a .cab file that you can download and install without ever installing a registry editor.
It's perfectly safe to use. There are two cab files.
1) To disable the existing proxy server setting
2) To restore the proxy server setting back to the default state.
All it does is change the existing registry value from 0 to 1.
Get it here:
http://www.gadgetech.info/treo/hacks/disableproxy/index.shtml#Download:
Download the two .CAB files to your Treo 750. Just click on it to install it like you would any other .CAB file.
To verify that it's installed. Try to browse to http://device.home/ . If you can get to it the proxy is enabled. If yoiu can't, it's (most likely) disabled.
If you use isp.cingular or a wifi card, of course it will only work if it's disabled.
gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I just verified. These settings are NOT there before the SIM is inserted. Only after the SIM is registered (SIM inserted, and phone turned on) do those settings become enabled.
Good catch. So it's not hard-coded. It's a carrier preference. I would assume that if I put a non-cingular SIM in the phone this setting would disappear. Palm does specified configuration based on the SIM inserted on thier Palm OS line, I assume they've done this on WM5.
I've been through the MSDN documentation and there's a whole big section devoted to carrier provisioning which is what this is.
other way round
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....
anyone know how to copy ROM files?? I found a DLL and registry entries for "PorkPie.dll" in the \Windows folder that I think is responsible for the cingular proxy hard coding and other customizations.
RF9, I noticed your Fido logo in your profile... Have you managed to get IE to work with a Fido SIM using this method?
Pls help : Unlocked Treo750 - Not able to view websites
Hi - I bought unlocked Cingular treo750 from US and now using in India. Have setup my ISP and using the Internet. I can now download my emails, use Pocket MSN but unfortunately not able to see any website on IE. It keeps says "Locating" to any kind of website I want to view.
The problem is only on viewing websites. IMAP email and Pocket MSN works perfect therefore I presume the connection is perfect.
Could you please help me on this.
After some time - The message appears "Page can not be downloaded as the connection was lost..."
Thanks very much.
Manish Vij
Treo 750 Proxy Disable
Hi RF9
I have been following your thread on getting a treo 750w from Cingular to work on the Fido network. I have tried to change the registry settings as you have described:
- <wap-provisioningdoc>
- <characteristic type="Registry">
- <characteristic type="HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings">
<parm name="EnableAutoDetect" value="1" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I got the download, but I am afraid I am not familiar enough to know how to install the changes on my phones software. Could you please do a more step by step explanation for me (us). Everything works on my Fido phone except when I go to a web page I get: "connecting" "locating" and then "page cannot be displayed".
Many thanks for your help. Ian
beispielwiese said:
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....
Click to expand...
Click to collapse
Did you get this to work? I'm Using hamachi mobile now and would like to use a proxy i have setup on my network.
Enquiring Minds
Please forgive my lack of technical savy; I am really struggling to learn all of this stuff...so my questions might seem a bit "stupid"... (it's just my old age showing!
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom
tommc4 said:
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom
Click to expand...
Click to collapse
Tom, I just tried www.bankofamerica.com and I got into it fine. So this does not seem to be the problem.
About your unit...
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!
tommc4 said:
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!
Click to expand...
Click to collapse
Yes, I have the at&t branded with the official WM6 upgrade also. I do have the at&t CapPackage removed per the instructions on this site but all the MediaNet dB is intact.
Cap Package?
I have not heard about that one? Can you elaborate, or point me in the rigt direction? Thansk!
Tom
RF9, this is very similar to what I'm experiencing, but when I go to "HKCU\Software\Microsoft\Windows\CurrentVersi on\Internet Settings" the EnableAutoDetect value is already set to 1.
I have the AT&T Tilt, which came with WM6.
Here's my problem thread : http://forum.xda-developers.com/showthread.php?t=352064
Thanks.
Hi RF9,
I saw this thread and tried your .cab file on my treo 750 and now my internet explorer is running sweet! ive been having the problem for some weeks now and im truly happy that finally my treo is fully functional using softbank AP here in Japan....
a lot of thanks to you!
Razor1973 said:
RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!
Click to expand...
Click to collapse
Hi to All;
Im sorry if im posting this email on a wrong thread. My apologies am not very familiar with this type of threads. I would like to ask for any assistance on my Mobile fone. I bought a Treo 750 AT&T from a friend who works in the States who brought his mobile fone here in the Philippines. I am now using the Treo 750 here in the philippines using a local network provider. I can send sms using the local network but I can't seem to connect to the internet and can't even send an MMS. Ive have tried hopelessly but there would always b e a promp which says" Connecting to : AT&T , connecting to GPRS,3G.." and it can't connect...I also tried to access yahoo and internet explorer but the same thing, could'nt access as well. I tried to ask assistance from the network's wireless center but they said that they could not help me on this problem either. I am no left with an expensive mobile phone with a lot of features, but couldn't use them. I hope somebody can help me with this type of problem.
Best regards,
Abrille
i've two device
c600 whith Windows Mobile 6 for Tornado Perfect English Edition Released
c600 whith WM6 For Tornado - HTC Edition
but i can not configure those devices in mms and iternet .
I want ask if somebody had found a simply road to make a configuration.
in italy is not work . many people ask this cab or those info but ...
many thanks andrea
making a cab Document!
This is the application (HP iPAQ DataConnect) from HP iPAQ 514 that sets the Internet/WAP/MMS settings for ALL operators around the world.
http://rapidshare.com/files/65992342/HP_iPAQ_Data_Connect_by_NiTroGen.cab
It's tested on my Tornado and it works fine!
Unfortunately it must be installed in \Windows directory and it's about 300 files, occupying a total of 2MB! Just install it, run it, select your Country and Operator and uninstall it to regain these 2MB.
Warning! After the installation, my system became unstable and I had to reboot. If it will happen to you, do not remove the battery, just turn off and on the phone to flash the filesystem cache. This instability is normal because there are a lot of small files installed making the filesystem cache crazy!!!!
If you get a "SIM Error" with DataConnect then run MMISyncApp and rerun DataConnect! I don't know why this happens, but that's how it is solved.
Yes, I know this app is a little pain in the a$$, but it surely works!
question
Does this work for tmobile ? I have sda with wm6.
Or does anyone know settings for tmobile I can get internet OR email to work simultaeously using GPRS.Thanks!
gumbyandpokie999 said:
Does this work for tmobile ? I have sda with wm6.
Or does anyone know settings for tmobile I can get internet OR email to work simultaeously using GPRS.Thanks!
Click to expand...
Click to collapse
What data plan do you have with T-Mobile?
tzones
bipinsen said:
What data plan do you have with T-Mobile?
Click to expand...
Click to collapse
I am using the tzones $5.99 .It does work but I have to keep going into connects to and changing WAP to Internet and back and forth to get email OR internet.Weird huh?
jus tried it the mms still dont work, my txt work anyways...but not mms
iky10 said:
jus tried it the mms still dont work, my txt work anyways...but not mms
Click to expand...
Click to collapse
Under MMS settings
1. Make sure Port is 8080 (default 80)
2. Make sure WAP version is WAP 2.0 (default 1.2)
it jus changed the settings it says error synchronzing...
All,
I used to be a symbian fan. Then i switched to a Vox. was not too impressed. Then i discovered xda-developers!
You guys rock! In 4 days time, i was running Dr Gonzo's 1.1 ROM, and i have since fallen in love with the Vox.
Question: Does anyone here know how to configure GPRS for Airtel, India? It used to work fine for me till i switched to this phone. All settings (IP,etc are correct).
I get an error stating the remote host disconnected the session, or something to that effect.
WiFi works fine.
Any thoughts?
run the connection setup wizard.
Already did,and all APN, etc are correct. Still no luck. Any other thoughts?
rphukan said:
Already did,and all APN, etc are correct. Still no luck. Any other thoughts?
Click to expand...
Click to collapse
make sure to reboot ur phone after connection wizzard. it used to be a huge mission to set up gprs but since the wizzard came out its really a breeze! if its not working test ur sim with another phone just to make sure its not actually the sim thats not gprs enabled yet. if this is the case, phone ur service provider and ask them to activate it
One quwestion:
Is there any way so I can add settings for my network in connection setup wizzard in a gonzo rom 6.1?
@rphukan
Even I use the Airtel Network.The connection setup wizard did the trick for me and gprs works beautifully. Which ROM do you use?
All, thanks for the responses, guys!
I am running Dr Gonzo's 1.1 Rom. I have tried the connection setup wizard, and have also tried manually entering the settings.
The connection is active on my Sim, i just checked on other phone. (Nokia N70 Music edition).
@prajith: Do you have airtel mobile office enabled? or is it working just on airtel live/GPRS?
Hi Guys,
Does anyone have the MMS configuration settings for the HTC Touch Pro on the Vodafone network? I have tried the Diamond settings but with no luck. Quite annoying having to login to vodafone site each time I get a mms.
Thanks in advance,
Dave
...Diamond settings?
The HTC Network Wizard (Connection Setup) should do you the trick for GPRS and MMS settings; its in Settings/Connections/Connection Setup.
Hi,
I meant the touch diamond. Trying the connection wizard now, wish me luck!
remember that once you have the settings on your device, you need to send an MMS from your device before you will be able to receive them
firstbuddha said:
remember that once you have the settings on your device, you need to send an MMS from your device before you will be able to receive them
Click to expand...
Click to collapse
Interesting, never heard that before, but it would explain a thing or two!