When I connect via USB to my Vista machine (I have Hermes, BlueAngel and Artemis) I get disconnected from the internet (I use a 3com router).
The same happens when I disconnect the USB.
Any Ideas?
any ideas?
I'd like to know as well... happens all the time and it's very annoying!
not sure about vista but with xp i had issues connecting to a wired network without internet while being connected to a wifi which had
to fix that i went into the network properties and picked my wires network
and picked properties for tcp ip
and advanced and changed the metric to a value lower then the value i set for the wifi
and that fixed it
i'd asume the same thing would work for a connection over the phone
Related
Hi,
Is it at all possible to share my smartphone/pocket pc wifi connection over BT?
The only threads I've seen relate to sharing cellular over Wifi (like turning your phone into an access point - not quite what I'm looking for
Any help would be much appreciated, thanks
mcwtrekkie said:
Hi,
Is it at all possible to share my smartphone/pocket pc wifi connection over BT?
The only threads I've seen relate to sharing cellular over Wifi (like turning your phone into an access point - not quite what I'm looking for
Any help would be much appreciated, thanks
Click to expand...
Click to collapse
I'm looking for the same thing, i think...
I want to share a internet connection like this:
wifi AP ----wlan----> htc touch diamond ----bluetooth----> PC
Is it possible?
Tnx
im too looking for this, I have a laptop with bluetooth but without wifi.
Anyone found anything?
Sharing Internet on Windows Mobile device, with BT clients
I am looking for this as well. I have a laptop with no WiFi, but with BT, and a WM6 HP 211 iPaq. I would like to connect the iPaq to the Internet using WiFi (easily done), then share the Internet connection through Bluetooth, with my WinXP SP2 PC.
I have paired the devices. For example, I can do ActiveSync synchronization via BT between my PC and the iPaq.
"Netwok Access" connection via BT between iPaq and PC seems OK as well.
Still, when I go to "Internet Sharing" on the iPaq, the "PC Connection" field shows only "USB", it does not show "BT PAN".
Can anyone help? many thanks in advance
Gail
WMWifiRouter can do Wi-Fi to USB, but not BT at this time. It is coming up, though.
It is meant for PocketPC though, though it can work on Smartphone the experience is not as good.
could be useful as a kind of repeater
Ive been looking for an app to turn HTC Fuze into a Wi-Fi repeater, but I have bluetooth on my laptop so this would in effect be a signal repeater for me. The bottleneck from wifi to bluetooth would be pretty heavy though Im sure.
ICS Control
I discovered an app that seems to be able to do what you are asking for and most every other network sharing combo you can imagine. Its called ICS Control. It would be great to have a repeater app.
Bluetooth connectivity drops when WLAN is on
Hi guys
I have an iPaq 210 that I'd like to use as a WiFi card for an WinXP SP2 PC.
Here's my problem, which often happens (not always):
1. I turn on Bluetooth on the iPaq
2. I connect the PC to the iPaq using the "Explore my Bluetooth Places" wizard, then "Connect". It says "connected". Then on the XP "Network Connections" window, it says "acquiring network address", and shortly after: "connected". PC's IP address: 192.168.1.125, default gateway (the iPaq): 192.168.1.6. In fact, I've setup this static IP address on the iPaq using the ICScontrol utility. Both computers see each other and ping works both ways. In other words, BT PAN is up and working.
3. Here's the problem: I then turn on the WLAN (Wi-Fi). When the WiFi connects, ping stops working. Then I can't get to the Internet from the PC using the iPaq. "Network connections" still says: "connected" on the BT PAN network.
When I disconnect the WLAN, BT ping starts working again.
What to do?
TIA
Gail
dont really know how to fix this
Re: Bluetooth connectivity drops when WLAN is on
Can this point the way? http://support.microsoft.com/kb/972305 ?
The problem is, that fix is for the system builder. Can someone suggest a registry setup or anything else?
damn, looking exactly for this
wanna use my touch hd with a bluetooth only netbook
hope someone can do it
btw, wmwifirouter seems the closest to do it
can do 3g to bt, but wifi only to usb
[]s
D2G wlan0 - bnep0
On the topic of reverse tether heRe
Ubuntu netbook and Droid 2 Global
Yes the 3g connection works, turn on wifi and
it seems to fall apart. I think there might be
some ip conflicts or I could use a bridge adapter
or something on my droid phone that is configurable,
maybe like br0 for an interface name.
sounds good to me.
what exactly happens when wifi is turned on
ifdown ppp0 ?
ifup tiwlan0 ?
thats exactly what appears to happen first ppp0 there and tiwlan0 not then, touch icon and run ifconfig -a again and it is now the opposite. All ifb interfaces unchanged..
both bnep0 and tiwlan0 on same subnet and have different ip, but tiwlan0 gets dhcp and bnep0 I believe is static.. A routing table could help.
Do I need to add new modules? can this be configured?
hi, first post here.
i have an HTC Touch Cruise with the default factory rom and it has an internal wifi antenna... I'm trying to setup a wireless network with my neighbour but my PC doesn't have a wifi adapter (and i don't have the money for one right now), so i was wondering if it is possible to make the pda some sort of adapter for the pc to use via usb/bluetooth?
One of the first thing we'll do if it's possible is to crack the wep key cause he can't rembemer the password and a hard reset to the router doesn't erase it
can also anyone suggest some tools to do that job?
I was thinking of running these tools on the pc since the pda will only serve as some kind of NIC...
hope someone can help...
Edit: Forgot to mention that i also have a bluetooh adapter on the pc if that comes of any use
P.S: Great Forum btw
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
MeeMk said:
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
Click to expand...
Click to collapse
LOL Windows makes it easy for us!
MeeMk said:
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
Click to expand...
Click to collapse
i've been snoping around that part, but it asks me for a conection name in which is on <none> cause i don't have a connection configured... if i go to the connections part, i don't know what kind of connection to create as it asks me to create a VPN or an ISP connection...
how can i configure internet sharing propperly?
would i be able to crack the wep key on the pc that way? (cracking it on the pc via the pda)
1. The program you'ew looking for is WmWifiRouter 1.20, it enables you to use your phone as a WiFi -> USB adapter...
2. Ask your neigbour to use Cain on his pc... it can reveal what's written in the password boxes (if it's XP or older), reveal it in the WiFi connection settings on the pc... Whith this you won't need any WEP cracking... also he should be able to change the WEP key without the original... if he doesn't know the access code to the router that's THE problem, check the manual for default values, and try those first before attempting anything else...
3. For configuring a 3G/HSDPA/GPRS/EDGE connection you'll need a data plan from you mobile carrier... after that you can configure the connection on your PDA.
VPN stands for Virtual Private Networking (read Wiki for more info)
ISP stand for Internet Service Provider (this'll be the one you'll need)
gnick666 said:
1. The program you'ew looking for is WmWifiRouter 1.20, it enables you to use your phone as a WiFi -> USB adapter...
2. Ask your neigbour to use Cain on his pc... it can reveal what's written in the password boxes (if it's XP or older), reveal it in the WiFi connection settings on the pc... Whith this you won't need any WEP cracking... also he should be able to change the WEP key without the original... if he doesn't know the access code to the router that's THE problem, check the manual for default values, and try those first before attempting anything else...
3. For configuring a 3G/HSDPA/GPRS/EDGE connection you'll need a data plan from you mobile carrier... after that you can configure the connection on your PDA.
VPN stands for Virtual Private Networking (read Wiki for more info)
ISP stand for Internet Service Provider (this'll be the one you'll need)
Click to expand...
Click to collapse
From what i've read on this forums, WmWifiRouter is for routing my 3G/HSDPA/GPRS/EDGE to other phones via wifi, but correct me if i'm wrong lol.
what i want to do is basiclly have wifi on the pc using the pda's built in antenna...
Thanks for the tips on the router, we'll try that
i know what those acronyms mean i just don't know how to configure them for the internet sharing program...
The ICS only shares your mobile internet with one computer be it on USB or BT, it can't act as a wifi adapter... The WMWifiRouter uses the ICS, but with different settings, that can't be utilized manualy... you can create an Ad-Hoc network with some registry tuning, but that's about it.. no DHCP, no NAT, no WEP, nothing that makes it easy, and secure...
Also I mentioned a version number for WmWifiRouter... the leatest (1.20) supports the Wifi -> USB mode, so with this your PDA can act as a WiFi adapter.
Also these PDAs weren't ment to be used this way, so expect high-level battery drainage, you'll need atleast 2 USB ports to charge it while using WMWiFiRouter.
But you can download the trial from the site, and see for your self... you won't loose anything with trying...
gnick666 said:
The ICS only shares your mobile internet with one computer be it on USB or BT, it can't act as a wifi adapter... The WMWifiRouter uses the ICS, but with different settings, that can't be utilized manualy... you can create an Ad-Hoc network with some registry tuning, but that's about it.. no DHCP, no NAT, no WEP, nothing that makes it easy, and secure...
Also I mentioned a version number for WmWifiRouter... the leatest (1.20) supports the Wifi -> USB mode, so with this your PDA can act as a WiFi adapter.
Also these PDAs weren't ment to be used this way, so expect high-level battery drainage, you'll need atleast 2 USB ports to charge it while using WMWiFiRouter.
But you can download the trial from the site, and see for your self... you won't loose anything with trying...
Click to expand...
Click to collapse
Ok, i got the 1.20 trial on the pda and got it working in Wifi -> usb mode, but now how do i search wireless networks on the pc? i noticed it is detected as wired connection, not a wireless one...
You don't need to quote the previous reply...
The PC sees a wired connection... so? You thought that, you can use the windows Wireless Zero Config for searching? I guess you just found out that you can't...
The wireless connection is managed by your PDA, connect to a wireless network with you PDA after you set up the WiFi -> USB...
gnick is correct, I am actually using my phone at home as a Wifi Adapter with WMWifiRouter 1.25 and it works very well. And YES, you have to connect your Wifi on phone first, then connect phone to computer via USB and (in my case) Windows 7 does the rest... I believe Vista also. Not sure about XP, don't have an XP machine, well I do, but it's off sitting in the closet (in timeout for not behaving good.. hehe)
i got the new router(speedtouch 780i) and at first there was no problem with connecting diamond to it....
BUT after i opened ports and set static ip to my pc that also conoects to that router(via wlan card) diamond cant connect to router whenever is my pc turned onand that is almost 24/7,so why my diamond cant connect to router while pc is turned on(once again, this happend after i opened port and set static ip to my pc)??
is this diamond or speedtouch(router) problem...do i need to put (how??) stiatic ip to diamond too??
other pc that are connected via lan to same router can normally connect always
please help i need internet for my diamond
This sounds like your router is set to distribute limited DHCP IP addresses based on the fact that you can't connect only when your PC is connected... look for DHCP distribution and change it.. if that's not the problem.. i'll try to think of something else.
well it seems that problem is with rom....i will test soon with new rom and i will tell results
tnx for reply
strange, condering it connects while your PC isn't connected.
Hi All,
I'm trying to setup my computer so it can use my Fuze for an internet connection. I'm currently running...
IVT BlueSoleil version 6.4.249.0
EnergyROM 20090709 Standard
I am able to setup a pairing between my phone and my computer by connecting through BlueSoleil.
I notice that my phone connects to COM10 then disconnects, but it says paired on the BlueSoleil manager (don't know whats up with COM10).
I then go to Internet Sharing and connect (on my Fuze), it says device setup has finished, connect bluetooth PAN on PC.
I go back to BlueSoleil (on my computer), right click on my Fuze and click "Connect Bluetooth Personal Area Network" and it gives me "operation not succesful, please try again".
I'm not sure what else to do, I can connect through activesync using usb, but not through bluetooth.
Any ideas?
Update
I got something going on the connection but no internet connection.
Basically when the phone was pairing with the adapter, it would pop up the "COM Port 10" connected box. During the time it was trying to connect I would right click on the phone and click "connect to PAN" or whatever its called and it actually connected!
However, it assigned me a 169.something address and I opened IE in windows but it woudn't load any web pages....bummer.
I'm having a problem with the same ROM, NRG's last couple of ROM's haven't worked on Bluetooth Internet Sharing correctly for me. When I get a chance, I'm going to roll back to a few months ago when it was working for sure just to confirm it is something with the ROM.
BTW, mine connects successfully, but it doesn't give my laptop an IP correctly.
activesync don't use pan for bluetooth at all it does a direct serial connection over bluetooth not a pan network based one
here is a guide for pan
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
this search should give a lot of step by step guides how one
make the com bluetooth port and connect it giving the search
as it depend on which bluetooth stack being used in both ends
http://www.google.dk/search?source=...ivesync&btnG=Google-søgning&meta=lr=&aq=f&oq=
Solved....sorta
OK, so yesterday I had gotten an IP address and it was connected but I thought I wasn't getting any internet service. Turns out I was, but it was incredibly slow, and the connection would go on and off. It did what I wanted to do but its not useable.
While I'm posting, I wanted to do Activesync over Bluetooth but my Fuze has COM ports from 0 to 9 and my Bluesoleil has Com ports 10 and up. How am I suppose to get the two to communicate if I can't get them on the same port? If I try to create a new port in Bluesoleil it starts and 13 and keeps going up...
bever used that bluesoil but heard many bad things about that stack
never had any issues using ms or vidcomm stacks both on the pc side and pda side
and cross
but never really used PAN as I have a wifi router and even if I did not then
they are dirt cheap and if you got a cable or adsl modem you just plug that into the wifi router and connect your desktop with a cable as they are also swtichs
Changed ROM, very fast now
I changed ROM's this morning to the AHEN_ROM and wow, what a difference. Just connected to see what would happen and its just as fast as the USB connection was. I'm not sure what is different about the ROM's but I can surf the web over my phone connection very nicely now.
Is there any way to sync Windows Phone 7 via Wifi with computer connected to LAN network .
I've got one pc,router and Windows Phone
If i add WiFi network card to the PC and connect both WP and PC to WiFi syncing is working fine.
If i remove WiFi network card from the PC and connect with LAN cable to the router WiFi syncing is not working any more.
Is there any way to fix this issue or it is by design ?
I started to capture network trafic with netmon but after 10 minutes not a single packed is addresed to my PC . That is realy annoyng.
On theory WP should broadcast packets and Zune should "answer" .
I tryed to start Zune Wifi sync service manualy but still got the same results.
edit: It seems that WP7 sends IGMP packet to the multicast address an then SSDP packet to inform what sertvice "hosts"
On the other side when i am connected trough LAN cable no such information is transfered.It seems that nothing comes to the multicast addressess 224.0.0.22.