I have tried searching the forums and can't find much Info.
Is anybody here using the above system for telephony & GPS; If so how do they intergrate/do they work well on the XDA II (I have ROM Version 1.72 with Radio1.17)
I Know about the headset profile probs not giving full functionality of the Handsfree use of the car kit but this doesn't bother me to much as long as I can Make and receive calls.
Thanks in anticipation!
I was going to get a CK3100, but heard so many problems regarding build quality, and lack of support, I got a HCB 30 instead.
It did not help when I tried to e-mail parrot for advice and 3 different e-mail adresses bounced back.
Works Perfect!
Just had the CK3300 installed today and it works perfectly - I Knew some of the functions didn't work because the XDA2 only supports headset profile but once you have transferred your contacts to the kit via bluetooth it works well.
Also the GPS works well with CoPilot 5 live; it picked up the signal straight away ; well pleased with this set up!!
same to me have the ck3300 tested with qtek2020 - works fine. problems with 9090 but after bluetooth update now it works fine. No tests with S100 at this time.
tested GPS with destinator 3 and map&guide fleet navigator and mobileobjects fleet management system.
don't use bluetooth tools after Rom 1.66 :!: CK3x00 didn't work aber installation of this
Set up
Just had the CK3300 installed today and it works perfectly - I Knew some of the functions didn't work because the XDA2 only supports headset profile but once you have transferred your contacts to the kit via bluetooth it works well.
Also the GPS works well with CoPilot 5 live; it picked up the signal straight away ; well pleased with this set up!!
Click to expand...
Click to collapse
Any tips on setting up the CK3300 with my XDA2?
Just had the car kit fitted - i need both nav and handsfree functions - but i am not sure that i have got the phone and ck3300 to bond properly. So everything is 'greyed out' on the parrot.
Using ROM 1.72.00WWE (1.72.181) and radio 1.17.00
Thanks for any help received.
If everything is greyed out then it isn't bonded properly!
Step 1
Delete the pairings you have from XDA2 and car Kit;
Step 2
On the car kit turn the control knob untill settings appear- then scroll to 'Advanced Settings' - 'pairing a telephone' - 'windows CE device'
Step 3
Now search for devices using your XDA2 and the car kit should be shown.
Step 4
Enter passcode 1234 and accept headset and serial profiles when shown.
PAIRING COMPLETE
to access your phonebook you need to transfere the contacts via bluetooth to the car kit.
Hope this helps
XDA2 CK3300
Managed to get the GPS set up (fiddling with COM ports - even imbeciles strike lucky sometimes)
Some items are now in black. However, I am not sure that I have done it right as I cannot get it to use my phone to make calls or receive them. Which is exactly why I bought it in the first place.
So, please (please please) can you tell me how to exchange my phonebook?
I am going to sit in the car right now and have a go at your bonding advice...maybe all will become clear (but that is not often my experience!)
Thanks again for your help.
You need to bond the phones in the manner I described or it will not work ; this is clearly ststed in the Parrot instructions and on their website.
(I have noticed a strong correlation between people who do not read instructions and complain things do not work!!) - Joke
You also need to make sure your headset profile is active on the XDA 2 for it to work. Again reading the instructions for the phonebook - you tap and hold a contact on the XDA2 and select 'beam contact' - 'via bluetooth' the bluetooth search then comes up and the car kit will be found you then 'tap to send'
Now i have the opposite problem!
Believe it or not, I have now got the XDA2 and the CK3300 bonding automatically so I can make and receive calls whilst driving. It works pretty well (occasionally makes an awful noise, but only occasionally). I am impressed.
However, once I had done that, the GPS is undetectable. I have tried all sorts of combinations. I have checked the instructions - and selected the long code (ends in 9600) but I am not certain that I am using the right com port. I have tried most of them without success.
Oddly, this is the one thing that WAS working before I got the car kit to work (for calls). Somehow, either I have lost the right settings OR the XDA2 won't do both (although I read somewhere that it would) OR my ROM needs updating (uh?)
Please help.
BTW, I am due a phone upgrade - I love the xda2 but would consider getting another phone if necessary, if anyone can recommend one that is fully CK3300 and TomTom compatible.
I don't use Tom Tom myself but from reading these forums I think you need to install the patch on their website to allow Tom Tom to use the correct Port .
Your Car Kit also needs it's software updating if it makes a noise like you say. On the Car Kit go to > settings-advanced settings-information and you will find the software version (sounds like 4.03) if it makes a noise. The latest on the Parrot website is 4.10b and this will fix the noise issue.
If you need help installing this let me know.
The best Phone is surprisingly the Old Fashioned Nokia 6310i - it has a good bluetooth stack and uses the handsfree profile rather than the headset so contacts sync automatically but if you require live traffic info best stick with what you got as the Nokia will not pair with the XDAII and the car kit at same time.
Which COM port?
For the moment, I have a temporary solution.
However, I have updated the TomTom Navigator software and the GPS, but still don't know which port the GPS in the CK3300 should be connected to.
Any ideas?
And, thanks Nikpro for the excellent help so far - you are a true altruist and a star!
The outbound port on the xdaII is port 5 by default
On XDAII go to Settings - System tab - Bluetooth settings and make sure you check the tick box for outbound COM port.
There is also a chance you have deleted your serial port profile so tap on the bluetooth icon in the Today Screen and go to bonded devices. Select the CK3300 and delete partnership (do not delete pairing from car kit end!)
Then search for new devices from the XDAII and the CK3300 will again come up; create a new partenship and everything should be good.
Still having problems
Oddly, I still cannot use the GPS on the CK3300.
I am using my old TomTom at the moment for GPS and the CK3300 for headset - which works fine, but I wanted the CK3300 to do both.
When I try and reset the GPS to the (series of numbers ending in 9600) as stated in the info and the instructions (Nikpro, take note - I have read them - but your comment made me laugh), the TomTom just 'freezes'. Wait - and wait - and wait - and when it reincarnates itself, no GPS at all.
I am using the 1.72.00WWE rom and radio 1.17.00
I think that I have tried every permutation for the COM port.
Has anyone any ideas? Please?
When you initially pair your XDA to the car kit do you get a message about serial connection show on the screen? The problem must be with the tom tom software as with copilot and mapopolis it works fine? or the way you are pairing the two!
What software version is the car kit? PLEASE DESCRIBE HOW YOU ARE PAIRING THE DEVICES??
Hi all, 1st post and all that.
Have you tried falshing the parrot with the newest rom, mine picked up enough to make and recieve call, but i flashed my xdaII with 2.02.T1WWE this morning and it works even better.
Hope you get a result
nikpro said:
I don't use Tom Tom myself but from reading these forums I think you need to install the patch on their website to allow Tom Tom to use the correct Port .
Your Car Kit also needs it's software updating if it makes a noise like you say. On the Car Kit go to > settings-advanced settings-information and you will find the software version (sounds like 4.03) if it makes a noise. The latest on the Parrot website is 4.10b and this will fix the noise issue.
If you need help installing this let me know.
The best Phone is surprisingly the Old Fashioned Nokia 6310i - it has a good bluetooth stack and uses the handsfree profile rather than the headset so contacts sync automatically but if you require live traffic info best stick with what you got as the Nokia will not pair with the XDAII and the car kit at same time.
Click to expand...
Click to collapse
Use Bluetooth tools www.bluetooth.jazztel.es
and edit the registry under hkey local machine, builtin, BTIBserial, rename BTIBserial.dll into BTIOBserial.dll
and go Start, Settings, System, Bluetooth settings and check both inbound and outbound.
Delete ALL paired devices, reboot, and re pair them.
You will now have an option for two serial ports, one for each device.
This is the only way to do it if you have two devices that need a serial port. If you have a third, you are SOL.
Normally, the stupid programmers who made the MS BT program, made it so it only had one dynamic port for BT. Some people would experience having to reboot before switching BT devices, most would have to re pair every dam time.
The new 2005 does not have this problem but it has other bugs.
They smart people at MS changed the databases so Mapopolis and other third party programs can not read the contacts or have other bugs with them. Plus the 2005 version here limits your memory.
The 2.02 - 2.06 will NOT work with Hands Free and most car kits need it and if you have caller ID via BT, you are SOL too.
The 2.20 is a stable and a good OS and the Hands free works much better. The down side is, when I get a call on the call waiting, even if I did not answer, it would disconnect the BT headset and no sound through the phone too. I would have to, click on Tools, Hands Free off, tools Hands
Free on before it would work. I have lost many clients this way.
I decided to disable call waiting in the phone settings and it only has a few bugs now like I have to turn off and then back on the BT headset after ever call or it would revert to Headset mode.
The caller ID will not display if the call is in the history of my BT headset or if it is in my contacts database.
I mention my BT headset because it is like a car system when used in Hands free mode.
Good luck, let me know if you have any trouble now.
Parrot 3100 with XDA II
Hello,
I have just put in a Parrot 3100 and it works fine as a handsfree phone.
is there any way when I am not in the car though to use my Jabra 250v headset without rebonding and selecting it as the preferred headset device?
I can't seem to switch between the Parrot and the Jabra when the other one is not in use without repairing.
Thanks for any advice
BT
Try turning of one and turning on the other and soft reset..
Ok, I have just spent my entire weekend trying to get my Qtek 9090 to communicate to my newly installed Parrot CK3300 (with GPS). I have read the manual about 3 times from beginning to end, know the whole website parrot.biz by hard (ugly site BTW), and have tried about everything in configuring, but with no success so far.
Initially I had the 2 devices paired to each other, but after I installed Tom Tom 3, it is impossible for me to get them to pair again. Nevertheless, the 2 devices "see" each other (when asked in "Linked devices"), but they can not get to communicate. From all the stuff I have read on forums and sites, it seems that I need to upgrade my Bluetooth version, but I have no idea how and where to start this procedure.
Can anyone help me out here ?
Any tips are welcome !
I just got a new car (Nissan Altima) with bluetooth. I have a 8125 with Molski's 2.26 Rom and MS VCommand 1.6
I got it to pair on the first shot. What I can't seem to do is to control Voice Command using the car button. Let me explain...
If I dial someone from contacts or using speed dial from the phone it uses the car system.
If I push the phone button on the steering wheel it prompts me to use the car system to dial a number.
If I push the button on the phone assigned to voice command it wants me to speak into the phone give instructions.
What I am trying to do is be able to push the button preferably on the steering wheel, but if no on the phone and be able to use the car system to tell the phone to do, as if the car were a headset.
Any ideas how to make this work? all the searches I found on the topic seemed to reference workarounds to get VC 1.5 to do bluetooth.
Thanks!
Car Kit Compatibility
Not all car kits support routing audio through bluetooth outside of a call. BMW kits are notorious for this. They assume that you would only ever want to use the car system to initiate an interaction and so they don't route the audio to the device. This makes it impossible on some car kits to use Voice Command or any other speech recognition software that is running on a mobile device. Some car kits do support this, i.e. Parrot car kits.
Thanks for the leads. It is not a "kit" per se, but part of the tech package that came with the car. Any ideas on how I can determine what "kit" Nissan is using and whether there is a way to enable it to route the audio to the phone?
Hello,
Bt MS stack is apparently not compatible with all BT headset, hands free en car kit devices. I have been trying to pair my pocketphone pda with a pioneer car kit without a successful result, the image of the hands free appears on the BT manager ‘as pioneer BT unit’, but the standard pin code 0000 or 1111 is always rejected.
Pioneer technical service couldn’t help, they say normally it should work with almost all BT headset devices and a compatibility list of the product is not available.
I guess the problem lays on the BT package. Is there a way to solve this issue by creating for example a BT compatibility patch, or changing something in the registry to make it compatible. Widcomm stack is better en compatible than the MS stack according to many users. Does anybody have any clue?
My device is upgraded to WM6 with always the same sad result.
Thanks
Hi, I have a pioneer bluetooth stereo in my car too, Found it a bit difficult to get paired at first, but it eventually worked. Although it would not give me the hands free profile, only the headset profile, which means I have to initiate and anwer the calls from the phone :-(
thinking about looking at the widcomm stack if I can get it running on WM6
For your information, I have tried the widcomm om my device ‘the last version’, but when I click on the bt icon in today screen, the blue led start flashing for a while but stops with “ memory storage error” . There are some bugs which should be corrected or some registry hack to get it work. However, the widcomm is far much better and stable than the MS BT stack ‘this later sucks’.
Apparently, you have a built-in bt unit, I have a pioneer 6800 + BT unit device optional, it worked perfectly with my old qtek 9090 as a hands-free and an BT audio device without any problem.
Hi,
does anyone know if it is possible to get sat-nav voice guidance via a Bluetooth headset on an O2 XDA Orbit. I bought two of these recently on Ebay. Was kinda hoping I could use them on the bike rather than spend a fortune on a Tom Tom Rider or Garmin Zumo. I've tried this with a Nokia E71 and it works, but I can't get it to work with the Orbit. I'm using Garmin Mobile XT 5.0, but I think the issue is with the Orbit, not the sat-nav software?
all a2dp able headsets should transfer all sounds from the pda to the headset
... Or any PPC with Broadcom Bluetooth Stack (because there is an option in settings that you can tick to route all sistem sounds over bluetooth)
Hi, I own an HTC UNIVERSAL with windows mobile 5.0 original rom and I use to play on it tomtom navigator using an external gps via bluetooth. I would like to know if it is possible to connect also an handsfree so I can answer calling meanwhile driving. Is it possible or it made conflict?
Thanks in advance
I used to have a HTC Wizard and used it with Bluetooth Carkit and GPS Mouse at the same time. It was also running WM5.0, so your Universal should be able to do it also!
Thank you...I will buy an handsfree then.
I bought handsfree and get paired. But when I start external gps it request me to pair and when I pair it disconnect the handsfree. Please can you help with some fix.
It is an HTC Universal win mobile 5.0