Database Info

I think I've killed my o2 mini!! Pls help this poor fool!

OK. The story goes like this....
I recently (about 4 months ago) bought and xda II mini. Love the phone, works(ed) brilliantly. Previously owned and loved an xda II and the mini has not disappointed.
So the phone’s working fine, and I’m bored one day and am cruising through the o2 website. I see there’s a ROM upgrade for the mini (1.11.00 WWE). I download and run the software which works a treat. All was just fine for about 3 days…until last night.
After using it for a voice call I press the power button to put it into sleep mode. The phone freezes. Not thinking this is overly strange I do a soft reset. Not suspecting that all is not well I put the phone down. After about 10 mins, I notice the backlight has gone off but it hasn’t gone to sleep. Strange. I touch the screen. Frozen. A couple more soft resets later I realise that once the backlight goes off OR I press the power button, the phone freezes. So I do a hard reset. Same thing. Uh oh.
I decide to run the ROM upgrade software again hoping this will rectify the problem. It gets worse. There’s no ExtROM on the phone. Now I’m at a loss. What’s gone wrong? What did I do? Why isn’t the ExtROM being installed?
Can anyone please help me install a clean 2003SE WWE for an o2 mini on Optus in Australia, or am I up the proverbial? Any assistance would be greatly appreciated. I’m not keen on sending it to Queensland for repairs.
Cheers, Paul

IMATE JAM is DEAD, does not boot....
I also have a similar problem, the story goes like -
My IMATE JAM was going perfectly fine, it also had the latest WWE ROM, no issues. Now for some reason, I download from www.pocketgear.com and install the trial version of "Pocket Mechanic" which also installs "Pocket Hack Master 2005". While trying out Pocket Mechanic, I use something called "registry cleaner" which is supposed to cleanup any incorrect/unused registry entries. After this I try "Pocket Hack Master 2005" which is a software to test the CPU speeds. As soon as I run this program, the screen freezes and my phone is dead. I try and reboot the device, but it is stuck at the blue boot-up screen. I am unsure whether my PPC died because of registry cleanup or because of "Pocket Hack Master 2005" software.
Anyways, now, I decide to re-install the WWE 1.12 ROM and start using the device. But, no luck, on the PPC - the blue boot-up screen does not go away and on the installer screen - "Checking information on your device... Please wait...." and is stuck.
I think the device is not booting up and hence is being not recognised by the PC as a USB device.
Please help... I am dead...!!!!

I think I've killed my o2 mini!! Pls help this poo
Well, in case anyone's interested. It appears the phone is back to normal. I trawled and trawled through this site and picked up tidbits of information on how to upgrade a ROM. I downloaded 1.12 and tried installing that which worked as badly as everything else I tried.
I decided to install the Asia shipped ROM (1.11), the instigator of all this mess, but via NemesisDE's method on page 4 of the sticky, instead of running the .exe file as per usual. For some reason, it appears to have taken it!!!
Yes, I'm excited. Even though no-one responded to my post, I got the info I needed from this site. Thanks so much to everyone who contributes here. You'd be surprised how some seemingly ridiculous things, help novices like me.
Thanks again!

flat liner...
what's the method? i think i've killed my mini, and desperately needed help... now i can't on my device and can't even go into the bootloader... please help me...

o2 orbit 2 - Sprite Backup

Hello,
I'm a long time browser of this site (for the past few years), and this is my first time posting. Great site - I love it!
I've just upgraded to a o2 Orbit 2 (HTC Touch Cruise).
I love this device, I've been using Pocket PCs since PPC2000 but never a PDA/Phone hybrid before, this is my first, it's amazing!
I'm using an 8gb MicroSD card to store as much as I can, rather that storing apps on ther main memory (the only apps installed there are Resco file explorer, and any today plug-ins etc).
I am having a slight issue with Sprite Backup, included with this device.
Everytime I try and backup my device state to the SD card, the program freezes about 32 seconds into the backup operation, the status in the app says "building self restoring header". I've left this for well over an hour, just incase it's working, but when i've returned to the device it's still stuck in this stage, and I have to soft-reset the device.
I've hard-reset a few times now, but to no avail, the program still freezes.
Currently I'm using the default stock o2-branded rom:
ROM Version: 1.25.206.3 WWE
ROM [email protected] 01/03/08
Radio Version: 1.58.25.14
Protocol version: 25.69.30.05H
Anyone else experience a problem like this? If so, how did you get around it?
Thanks in advance, Keep up the good work,
Chris.

never had this problem
hi there!
I got the same device, and it works (almost) perfect.
I can perform a Backup, no lacks, no critical errors, but everytime one file is skipped(a tmp file). It realy doesn't matter for me, i tried to restore a backup yesterday and it worked fine. The only thing which wasn't restored was the "photo dial cube", i had to add my friends again.. i think you know what i mean, ah and i had to set up the vpn connection again.
Everything else was restored fine. All contacs, all of my messages, pix, software... even the trial period of mochavnc keeps running, and wasn't reseted(doh).
I think a reinstallation could solve your problem. On the CD's which were delivered by O2 there is a Insaller for Sprite Backup. Try this.
Have a nice Day!
Greetings
Win****

Hi there, thanks for the reply.
I've reinstalled again. It was one of my apps (S2U2, or CallFirewall) that was causing the problem.
Some files were locked and couldnt be unlocked when Sprite Backup kills the processes.
I've found an alternative backup application, Resco Backup, that works flawlessly.
I've even performed a hard reset and restored from the backup, so all is good!!

So you don't use sprite anymore?
I'm fighting with my phone for three days now.
everytime I reboot after a restore, (sprite reboots it first after which all comes up well adn my phone is my old one) but as said after any reboot I do hereafter all my microsoft applications can't find their initiation files sych as :mssyncapp, :mspoutlook :mscprog, :msexplore
I've tried many times and many things and discovered that probably sprite is doing a background task. And it is.
As it resets to the wrong time and date, when set in the right time and date it has missed tasks and it will start these tasks imediately.
Uninstalling sprite helped me out!
But sprite is not easy to uninstall so many files will stay onboard and again after a reboot: crash.
Since the only sollution is factory reset (t-mobile screen), install sprite, restore phone, uninstall sprite, reboot and hope it will not fail the microsoft apps again; it is very time consuming to find out what the *** sprite is doing / has done to my phone.
Hard reset and reinstall every single application I had already installed seems the best way and like my predecessor; do not use the software that came free with your phone. It kills and also sels; a premium version, now why would I need that?

htc Touch Cruise / Polaris / 3650.

Hello all,
A simple question.
How can one tell what kind of a unit he has, is it WWE or is it ASIA or maybe another, I have bought my unit 2nd hand and since then had problems with the softwares and radio roms.
I have used WWE rom, and I just can not get all my contacts in, I have used ASIA and for a few days all was working fine, till something happens I reset the unit and either data is lost or the radio has no signal etc.
Another question, is it possible to stop the Automatic Customization after a hard reset???
Your help would be much appreciated.

WWE or Asia depends on installed ROM. Type can be Polaris 100 or Polaris 200, AFAIK, and is visible during hard reset.
What ROM are you using now? Looks like trouble with ROM or bad device.
Customization can be stopped, if I remember correctly, but you should check this thread: http://forum.xda-developers.com/showthread.php?t=355277&highlight=Polaris+tips+tricks

Hi,
Many thanks.
For the moment I am using a cooked rom Khanx 1.6 Pro.
I was really fed up with the Original Rom as I said it was fine for a few days, working smoothly, even backups by SPB were fine, and suddenly one day the unit froze and I had to reset after the rest nothing worked, all data lost.
Even after Hardreseting I was having problems with 'VDDemon' each time, only after re-installing the rom for a few times I was able to go back to working with it.
I mainly use the unit for telephone (ofcourse), mail, notes and sms.
By the way when I enter bootloader, I can see POLA100 MFG, and the SPL-2.20.Olinex, CPLD-2.
And what I meant about the Automatic ..., when you hard reset the unit you get a windows saying that in 3 seconds and automatic instal is beginning, how can one stop this instal????????
So really I am not even having fun with it at all.

OK, Pola 100 is here too, but SPL is original HTC.
Could you try device for few days with "bare" ROM, meaning no other software installed? Maybe it's software incompatibility.
For stoping customization check thread I mentioned, think it's described there. But I might be wrong, it could be some another thread. In any case, I remember reading about it here and a way how it can be stopped.
My Polaris is stable as stable Windows device can be...

Bodisson said:
OK, Pola 100 is here too, but SPL is original HTC.
Could you try device for few days with "bare" ROM, meaning no other software installed? Maybe it's software incompatibility.
For stoping customization check thread I mentioned, think it's described there. But I might be wrong, it could be some another thread. In any case, I remember reading about it here and a way how it can be stopped.
My Polaris is stable as stable Windows device can be...
Click to expand...
Click to collapse
What do you mean SPL is original HTC?
It is Oli's SPL...

[Q] My Fuze refuses to run unsigned software now!

I have an Att Fuze running the stock 6.1 firmware from Att.
I tried running XDAndroid 2.2 Final build for my phone, it appeared to crash while loading so I hard-resetted my phone.
Despite the fact that XDAndroid is supposed to run completely off the sdcard and not touch my internal memory, it appears to have corrupted my phone!
TouchFlo no longer launches (it keeps saying touch screen to launch TouchFlo, and if I do it goes crazy trying to launch and failing over and over), the phone is VERY slow and laggy, and the worst of it all, I CANT RUN ANY UNSIGNED SOFTWARE ANYMORE! Any attempt to run any program that isn't signed results in "The file (whatever) cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found"
I can't even run PimBackup to backup my contacts and text message logs!
I tried to install HardSPL since I figured might as well flash a custom rom to it but it failed too! It kept saying "Error 246 Device not responding" even though it identified it correctly when its booted into WM, and when I force it into bootloader mode it starts the process but gets stuck at 0% and eventually HardSPL gives up.
Is there anything I can try? Any way I can backup not just my contacts buy my call logs, text logs, etc before trying to reflash it? Any idea why XDAndroid would do this to my phone?

From what I understand, it isn't specifically Haret that did it, but some weird response to an error in starting Haret. I can't remember exactly what I did but I tried to run Haret incorrectly (my finger slipped on the touch-screen) and after that nothing would run. It triggered some weird thing in the OS.
I've heard of some people needing to get into reset mode before they can flash their phone -- not sure what the process is though.

Might be best to post in THIS thread. Keep in mind, you don't want to keep creating threads. It doesn't help our forum at all...
Also, it helps to read the post in it's entirety then try it out or if you need further assistance, post a reply.

R^7Z said:
Might be best to post in THIS thread. Keep in mind, you don't want to keep creating threads. It doesn't help our forum at all...
Also, it helps to read the post in it's entirety then try it out or if you need further assistance, post a reply.
Click to expand...
Click to collapse
Sorry about that, pretty much every forum I have ever posted in prefers you to make a new topic instead of post in an existing one when you have a problem.
I'll post my question there, although I wasn't sure where to ask a question about disabling that annoying signed programs thing.

[Q] Screen lock software stalls Messaging

I was using S2U2 as a screen lock application while running Windows Mobile 6.1 on my HTC Touch Pro 2. In the beginning everything worked smoothly, and S2U2 was exactly the program I needed. However, after I while, I started experiencing problems with my text messaging applications. Text messages would not come in, only the screen would wake up. Then, if I unlocked the phone with S2U2, the first stuck text message would come in. Later, as the problem progressed, text messages would not come in even after the unlock. I would have to open any other program, close it, and then the next SMS would come in. And so on. It came to a point where I was going off my mind, and I couldn't figure out where the source of the problem is.
It seemed as it is either a software problem or a system problem. Because of all the problems I decided it's time to upgrade to Windows Mobile 6.5. I was confident that this would stabilize everything. Unfortunately, after restoring all programs and settings from a backup program, it was even worse. I was very disappointed. This meant that the problem is with some software, and trying to figure out which one is a major job. But I had no choice. I made another hard reset and started re-installing all programs one by one, while monitoring performance in order to pinpoint the bad guy.
Guess what? I installed everything I had before and it works very fine. The only program I did not install is S2U2. I suspected this one is causing all the trouble, but I had no evidence. Now I do. I need this program desperately, but I'm afraid to re-install it, because I'm sure it will start all the problems again...
Later, I found another similar program (but not free) - Pocket Shield. So I installed this program. Worked nicely, but sure enough, after a day or 2, the same problems started to resurface again!
I guess after all, it must be something in the code that both programs use that clogs up the system.
Right now, I'm totally lost. I desperately need a screen locker because my phone does all kind of weird stuff on its own while in my pocket, but I'm afraid to install any of these programs, as I'm sure it will mess everything up again!!
Any help will be greatly appreciated!!! Thanks in advance...